时间序列散斑干涉场中相位函数的计算

散斑干涉或电子散斑干涉计量应用于连续运动或变形物体时,就会产生一个时变的散斑干涉场,通过摄像系统连续地采集这一时变散斑场,可获得一系列时间序列散斑干涉图,通过对序列散斑图上各点在时间轴上光强值的变化进行分析,提出了一种基于时间序列的分析方法,用以提取干涉场的相位值,进而获得物体全场变形信息。     

Comparison between instantaneous and integral intensities in dynamic speckle pattern interferometry

A new speckle measurement technique called temporal speckle pattern interferometry or time sequential speckle pattern interferometry has been developed recently. Its principle is that by capturing the temporal speckle patterns related to the object deformation or displacement, the whole-field displacement, the amplitude of the vibrating object and the shape of the tested object can be calculated through speckle intensity fluctuation scanning technique or Fourier-transforming method. In this paper, we combine the analytical and numerical methods to simulate the properties of the time demodulation in temporal speckle patterns interferometry techniques. The performance of three kinds of temporal phase sequences, power, exponential and harmonic phase sequences, are studied with the parameters of temporal speckle intensity fluctuation, the value of the spatial phase term, optical integral time of the recording camera and the initial phase of the temporal speckle intensities. The results indicate that the normalized value and period change of the instantaneous intensity are nearly coincident with that of the integral intensity for the harmonic temporal phase sequences and are different for the power and exponential temporal phase sequences.     

基于条纹等值线相关的散斑条纹图处理新方法

在数字散斑干涉术中,通常由物体变形前后得到的两幅原始散斑场用相减方法来得到条纹图,并由相移后的多幅(三幅以上)条纹图来求取相位场。介绍了一种基于条纹等值线相关的条纹图生成新方法,并在此基础上提出了基于单幅干涉条纹图的相位场提取新方法和基于条纹等值线相关的单步相移新方法。实验结果表明,该方法具有良好的结果和发展前景。     

Measurement of curvature distribution using digital speckle three-shearing aperture interferometry

Digital speckle three-shearing-aperture interferometry used for the measurement of curvature distribution fields of a deformation object is proposed for the first time. In this method, pure curvature distribution fringes without containing slope distribution fringes can be obtained by using digital speckle three-shearing-aperture interferometry. Two specklegrams, one before and the other after object deformation, are recorded by a CCD camera and stored in a computer. A 2-D fast Fourier transform (FFT) and a 2-D inverse FFT (IFFT) are performed on the two specklegrams. The subtraction of the transformed specklegrams will produce curvature distribution fringes, and the speckle noises in curvature distribution fringes can be removed after these fringes pass through low-pass filtering. Results from theory and experiments are in good agreement.     

Digital phase stepping speckle interferometry

A variation of electronic speckle pattern interferometry (ESPI) is presented whereby phase fringes are produced in contrast to speckle correlation fringes. Digital phase stepping speckle interferometry uses a phase measurement technique developed for holographic interferometry, which involves phase shifting of the reference beam in a conventional speckle interferometer. Saw-tooth phase fringes are produced by subtracting the phases of the speckle fields before and after object deformation in a digital frame store. This enables the sign of the deformation to be distinguished. After application of a special low-pass digital filter, the phase fringes are of adequate quality to be counted automatically.     

Continual deformation analysis with scanning phase method and time sequence phase method in temporal speckle pattern interferometry

If a laser beam illuminates a continual deformation object surface, it will lead to a temporal speckle pattern on the observation plane. Recording this time-dependent speckle pattern the deformation of the surface of an object can be obtained. Two methods, scanning phase method (SPM) and time sequence phase method (TSPM), have been introduced for measuring the displacement caused by the deformation in temporal speckle pattern interferometry (TSPI). Their principle is that by capturing a series of speckle interference patterns related to the object deformations, the fluctuations in the intensity of the interference patterns can be obtained. Through scanning these fluctuations and estimating both the average intensity and modulation of the temporal speckle interference patterns, the phase maps for whole-field displacements are calculated. In this way one is capable of quantitatively measuring continual displacements simply using a conventional electronic speckle pattern interferometry (ESPI) system without phase shifting or a carrier. The elaboration on the new methods is given in this paper and experiments are performed to demonstrate their performance with a conventional ESPI system.     

Digital Speckle Photography of Subpixel Displacements of Speckle Structures Based on Analysis of Their Spatial Spectra

We have investigated the capabilities of the method of digital speckle interferometry for determining subpixel displacements of a speckle structure formed by a displaceable or deformable object with a scattering surface. An analysis of spatial spectra of speckle structures makes it possible to perform measurements with a subpixel accuracy and to extend the lower boundary of the range of measurements of displacements of speckle structures to the range of subpixel values. The method is realized on the basis of digital recording of the images of undisplaced and displaced speckle structures, their spatial frequency analysis using numerically specified constant phase shifts, and correlation analysis of spatial spectra of speckle structures. Transformation into the frequency range makes it possible to obtain quantities to be measured with a subpixel accuracy from the shift of the interference-pattern minimum in the diffraction halo by introducing an additional phase shift into the complex spatial spectrum of the speckle structure or from the slope of the linear plot of the function of accumulated phase difference in the field of the complex spatial spectrum of the displaced speckle structure. The capabilities of the method have been investigated in natural experiment.     

双散斑场相移数字干涉计量

本文介绍了一种检测散射表面变形的自动测量系统。将相移和数字图像处理技术应用于数字散斑干涉计量中,毋须中间记录过程,在计算机控制下采集数据和计算相位,产生相位条纹而非相关条纹。用图像处理技术消除散斑随机性引起的噪声。文中给出了面内、离面变形的测量结果。     

数字散斑法在局域剪切带三维变形研究中的应用

在适当的温度、应变率和预变形下,合金材料的拉伸试验中,将会出现伴随应力锯齿形跌落的雪崩式剪切变形带,即波特文-勒夏特利埃(Portevin-Le Chatelier,PLC)效应。利用高速数字摄像系统(分辨力1000 frames/s)并结合数字散斑干涉法(Digital speckle pattern interferometry,DSPI)和数字散斑相关法设计了一套光学变形测量系统,实现了拉伸试验中对试件表面三维变形的实时、精确测量。利用该光学系统对铝铜合金试件在拉伸试验中产生的跳跃传播的局域剪切带瞬态成核过程进行捕捉。通过结合数字散斑相关法得到的面内变形定量结果和数字散斑干涉法得到的表现离面变形的条纹图,再现了剪切变形带成核和传播瞬间的三维变形过程。     

Speckle interferometry for measurement of continuous deformations

Improvements of a method for measurement of continuous displacements and deformations with digital phase shifting speckle pattern interferometry are presented. The method is based on an algorithm that, with the knowledge of the initial phase, only needs one image at a time to evaluate continuos phase changes due to object deformations. In the improved method, the initial random phase of the speckle pattern is evaluated using a number of phase-shifted images before the deformation under study. This is used for increasing the accuracy of the initial phase estimation and reducing influences from image noise and other measurement disturbances. The phase-shifted speckle patterns are used as references for comparison with the speckle patterns of the deformed object, thereby increasing the reliability and accuracy of the phase estimations of the deformed patterns. The technique can be used for measuring deformations such as transients and other dynamic events, heat expansion as well as other phenomena where it is difficult to accomplish phase shifting during deformation.     

Measurement of non-monotonous phase changes in temporal speckle pattern interferometry using a correlation method without a temporal carrier

Recently, a phase evaluation method was proposed to measure nanometric displacements by means of digital speckle pattern interferometry when the phase change introduced by the deformation is in the range [0,π) rad. This method is based on the evaluation of a correlation coefficient between two speckle interferograms generated by both deformation states of the object. In this paper, we present a novel technique to measure non-monotonous displacements in temporal speckle pattern interferometry using a correlation method without a temporal carrier. In this approach, the sign ambiguity is resolved automatically due to the introduction of a function that determines the correct sign of the displacement between two consecutive speckle interferograms. The rms phase errors introduced by the proposed method are determined using computer-simulated speckle interferograms. An application of the phase retrieval method to process experimental data is also presented.     

Robustness of Objective and Subjective Speckle Patterns in the Speckle Strain Gauge

The robustness to rigid body object motions of three optical systems used in the speckle strain gauge were experimentally investigated and compared with analytical results of the correlation. It was found that an out-of-plane motion of the object damaged the reliability of the strain measure when recording the objective speckle patterns while subjective speckle patterns were more robust. Besides out-of-plane object motions, the robustness of a free-space geometry and an afocal imaging configuration are approximately the same, while a telecentric imaging system is more robust to rigid body motions but more sensitive to deformation gradients (basically in-plane rotation and tilt). Results from a measurement of the relaxation in a lead-tin alloy used in organ pipes is also presented.Presented at 1996 International Workshop on Interferometry (IWI ‘96), August 27-29, Wako, Saitama, Japan.     

Velocity and density field measurements by digital speckle method

Velocity and density field measurements based on image processing of laser speckle or pseudo-speckle pattern have been developed. Laser speckle velocimetry (LSV) or white-light speckle velocimetry (WSV), which corresponds to a high-image-density PIV, gives a local velocity vector map or whole field velocity contour map of a two-dimensional flow field seeded densely with fine particles. This technique has an advantage in high-speed flow measurement without limit of frame rate except for directional ambiguity. New techniques of laser speckle photography and laser speckle interferometry by means of digital image processing have been developed recently for density field measurements. In laser speckle photography, a local density gradient vector map is reconstructed by cross-correlation evaluation between the reference and the object speckle patterns. In laser speckle interferometry, an equi-density contour map is reconstructed by image subtraction between the reference and the object interferometric speckle patterns.     

基于单幅数字散斑投影及图像相关的离面振动测量

采用单幅数字散斑图投影及高速数字图像采集技术,研究了动态离面位移的测量。采用商用液晶投影仪将计算机产生的模拟散斑图投影到待测动态变形物体表面,由高速数字图像采集设备摄取并保存变形散斑图,采用时间序列数字图像相关软件计算出物体表面各点随时间变化的离面位移。这种方法用于振动分析时不仅可以获得振型分布,而且还可以获得各点的振幅值。与现有的激光频闪照相测振及激光多普勒测振等方法相比,具有光学系统简单,可全场定量测量。悬臂梁振动实验结果证实了该方法的有效性。     

Stereophotogrammetric 3D shape measurement by holographic methods using structured speckle illumination combined with interferometry

We present a unique combination of the numerical three-dimensional (3D) reconstruction of the shape of an object with interferometric deformation measurements. Two cameras record several holograms of an object that is illuminated by structured illumination. This illumination is realized by speckle patterns. To improve the image quality, an inplace speckle reduction technique is combined with the structured illumination to reduce the effect of disturbing subjective speckles which appear in the reconstructed images. Stereophotogrammetric methods are applied to extract the 3D surface information of the object out of the reconstructed images. Since the recording is done by holography and because stereophotogrammetry enables a pointwise correlation between the two views, it is possible to combine other holographic techniques with the reconstructed 3D shape. This is demonstrated by an interferometric deformation measurement of an object cooling down. The resulting interferometric fringes are mapped onto the reconstructed 3D surface. Hence, the proposed method enables automatic and dense matching of interferometric fringe-maps recorded by spatially separated holograms onto the surface of the object, which has not yet been realized by existing techniques.     

数字散斑干涉三维变形测量技术研究进展

三维变形可以转换为应力/应变分布,是材料性能测试和结构可靠性分析的关键参数。在众多三维变形测量技术中,数字散斑干涉技术可以高精度地测量三维变形信息,在航空航天、汽车、先进制造、土木工程和生物医学等行业发挥着十分重要的作用。从散斑干涉基本原理出发,详细介绍了几类三维变形散斑干涉测量技术,并分析比较各类方法的优缺点;同时介绍了散斑干涉三维变形测量技术的国内外研究进展和最新应用;最后展望了散斑干涉三维变形测量技术在动态同步测量、测量系统简化以及应用范围扩宽等方面的发展趋势。     

时间序列散斑干涉技术研究及应用

当用相干激光照射在一个连续位移或变形的漫射物体表面时,在与参考光形成干涉的接收面上即产生一随时间变化的散斑干涉场通过对这一干涉场的时间域进行分析,可实现时变位移场的定量检测本文介绍了基本时间序列散斑干涉场的扫描相位方法和时间序列相位法的相位函数解调原理,探讨了它们的计量特性,并将其用于火箭固体燃料性能的检测.     

A comparative study of phase-shifting algorithms in digital speckle pattern interferometry

Digital speckle pattern interferometry (DSPI) is a tool for making qualitative as well as quantitative measurements of deformation of objects. Phase-shifting algorithms in DSPI are useful for extracting quantitative deformation data from the system. Comparative studies of the different phase-shifting algorithms in DSPI for object deformation measurement are presented. Static and quasi-dynamic deformation of the object can be measured using these algorithms. Error compensating five-step phase-shifting method is used for the algorithms.