Syntheses and structures of ytterbium(II) hydride and hydroxide complexes: similarities and differences with their calcium analogues

The Yb(II) hydride complex (DIPP-nacnac)YbH x THF (3-Yb, DIPP-nacnac = CH{(CMe)(2,6-iPr(2)C(6)H(3)N)}(2)) was prepared by a mild metathesis reaction of (DIPP-nacnac)Yb[N(SiMe(3))(2)].THF with PhSiH(3). 3-Yb crystallizes as a dimer with bridging hydride ions, and its geometry is similar to that of the analogue calcium hydride complex (3-Ca). 3-Yb is well soluble in benzene and remarkably stable in solution at room temperature. Ligand exchange to the homoleptic Yb(II) complexes takes place at higher temperatures (3-Yb is less stable than the analogue 3-Ca). The soluble hydride complexes 3-Ca and 3-Yb are catalysts for the hydrosilylation of 1,1-diphenylethylene, but differences in the product distributions are observed. Slow hydrolysis of (DIPP-nacnac)Yb[N(SiMe(3))(2)].THF gave reduction of water and unidentified Yb(III) complexes. Fast hydrolysis at low temperature, however, resulted in the first Yb(II) hydroxide complex, (DIPP-nacnac)Yb(OH) x THF (4-Yb, 20% yield), which is a dimer with bridging hydroxide ions in the solid state. The crystal structure is isomorphous to that of the calcium analogue 4-Ca. 4-Yb is well soluble in benzene and considerably more stable against ligand exchange and formation of homoleptic species than 3-Yb.     

Calcium-amidoborane-ammine complexes: thermal decomposition of model systems

Hydrocarbon-soluble model systems for the calcium-amidoborane-ammine complex Ca(NH(2)BH(3))(2)?(NH(3))(2) were prepared and structurally characterized. The following complexes were obtained by the reaction of RNH(2)BH(3) (R = H, Me, iPr, DIPP; DIPP = 2,6-diisopropylphenyl) with Ca(DIPP-nacnac)(NH(2))?(NH(3))(2) (DIPP-nacnac = DIPP-NC(Me)CHC(Me)N-DIPP): Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3))(2), Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3))(3), Ca(DIPP-nacnac)[NH(Me)BH(3)]?(NH(3))(2), Ca(DIPP-nacnac)[NH(iPr)BH(3)]?(NH(3))(2), and Ca(DIPP-nacnac)[NH(DIPP)BH(3)]?NH(3). The crystal structure of Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3)(3) showed a NH(2)BH(3)(-) unit that was fully embedded in a network of BH???HN interactions (range: 1.97(4)-2.39(4)??) that were mainly found between NH(3) ligands and BH(3) groups. In addition, there were N-H???C interactions between NH(3) ligands and the central carbon atom in the ligand. Solutions of these calcium-amidoborane-ammine complexes in benzene were heated stepwise to 60?°C and thermally decomposed. The following main conclusions can be drawn: 1)?Competing protonation of the DIPP-nacnac anion by NH(3) was observed; 2)?The NH(3) ligands were bound loosely to the Ca(2+) ions and were partially eliminated upon heating. Crystal structures of [Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3))](∞), Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3))?(THF), and [Ca(DIPP-nacnac){NH(iPr)BH(3)}](2) were obtained. 3)?Independent of the nature of the substituent R in NH(R)BH(3), the formation of H(2) was observed at around 50?°C. 4)?In all cases, the complex [Ca(DIPP-nacnac)(NH(2))](2) was formed as a major product of thermal decomposition, and its dimeric nature was confirmed by single-crystal analysis. We proposed that thermal decomposition of calcium-amidoborane-ammine complexes goes through an intermediate calcium-hydride-ammine complex which eliminates hydrogen and [Ca(DIPP-nacnac)(NH(2))](2). It is likely that the formation of metal amides is also an important reaction pathway for the decomposition of metal-amidoborane-ammine complexes in the solid state.     

Protonation of a lanthanum phosphide-alkyl occurs at the P-La not the C-La bond: isolation of a cationic lanthanum alkyl complex

Protonation of the heteroleptic, cyclometalated lanthanum phosphide complex [((Me3Si)2CH)(C6H4-2-CH2NMe2)P]La(THF)[P(C6H4-2-CH2NMe2)(CH(SiMe3)(SiMe2CH2))] with [Et3NH][BPh4] yields the cationic alkyllanthanum complex [(THF)4La[P(C6H4-2-CH2NMe2)(CH(SiMe3)(SiMe2CH2))]][BPh4].     

Two-coordinate d9 complexes. synthesis and oxidation of NHC nickel(I) amides

Reaction of the d9-d9 Ni(I) monochloride dimer, [(IPr)Ni(mu-Cl)]2 (1), with NaN(SiMe3)2 and LiNHAr (Ar = 2,6-diisopropylphenyl) gives the novel monomeric, 2-coordinate Ni(I) complexes (IPr)Ni{N(SiMe3)2} (2) and (IPr)Ni(NHAr) (3). Reaction of 2 with Cp2Fe+ results in its 1-e- oxidation followed by beta-Me elimination to give a base-stabilized iminosilane complex [(IPr)Ni(CH3){kappa1-N(SiMe3)=SiMe2.Et2O}][BArF4] (6). Oxidation of 3 gives [(IPr)Ni(eta3-NHAr)(THF)][BArF4] (4), which upon loss of THF affords dimeric [(IPr)Ni(N,eta3:NHC6iPr2H3)]2[BArF4]2 (5).     

Heavier group 2 element-catalysed hydroamination of isocyanates

The heteroleptic calcium amides [{ArNC(Me)CHC(Me)NAr}Ca(NR(2))(THF)] (Ar=2,6-di-iso-propylphenyl, R=SiMe(3), Ph) and the homoleptic heavier alkaline earth amides, [M{N(SiMe(3))(2)}(2)] (M=Ca, Sr and Ba) are reported as pre-catalysts for the hydroamination of isocyanates.     

Bis(imidazolin-2-iminato) rare earth metal complexes: synthesis, structural characterization, and catalytic application

Reaction of anhydrous rare earth metal halides MCl(3) with 2 equiv of 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-imine (Im(Dipp)NH) and 2 equiv of trimethylsilylmethyl lithium (Me(3)SiCH(2)Li) in THF furnished the complexes [(Im(Dipp)N)(2)MCl(THF)(n)] (M = Sc, Y, Lu). The molecular structures of all three compounds were established by single-crystal X-ray diffraction analyses. The coordination spheres around the pentacoordinate metal atoms are best described as trigonal bipyramids. Reaction of YbI(2) with 2 equiv of LiCH(2)SiMe(3) and 2 equiv of the imino ligand Im(Dipp)NH in tetrahydrofuran did not result in a divalent complex, but instead the Yb(III) complex [(Im(Dipp)N)(2)YbI(THF)(2)] was obtained and structurally characterized. Treatment of [(Im(Dipp)N)(2)MCl(THF)(n)] with 1 equiv of LiCH(2)SiMe(3) resulted in the formation of [(Im(Dipp)N)(2)M(CH(2)SiMe(3))(THF)(n)]. The coordination arrangement of these compounds in the solid state at the metal atoms is similar to that found for the starting materials, although the introduction of the neosilyl ligand induces a significantly greater distortion from the ideal trigonal-bipyramidal geometry. [(Im(Dipp)N)(2)Y(CH(2)SiMe(3))(THF)(2)] was used as precatalyst in the intramolecular hydroamination/cyclization reaction of various terminal aminoalkenes and of one aminoalkyne. The complex showed high catalytic activity and selectivity. A comparison with the previously reported dialkyl yttrium complex [(Im(Dipp)N)Y(CH(2)SiMe(3))(2)(THF)(3)] showed no clear tendency in terms of activity.     

Deprotonation reactions of zirconium and hafnium amide complexes H2N-M[N(SiMe3)2]3 and subsequent silyl migration from amide -N(SiMe3)2 to imide =NH ligands

Ammonolysis of previously reported Cl-M[N(SiMe3)2]3 (M = Zr, 1a; Hf, 1b) leads to the formation of peramides H2N-M[N(SiMe3)2]3 (M = Zr, 2a; Hf, 2b) which upon deprotonation by LiN(SiMe3)2 or Li(THF)3SiPh2But yields imides Li+(THF)n{HN(-)-M[N(SiMe3)2]3} (M = Zr, 3a; Hf, 3b). One -SiMe3 group in 3a-b undergoes silyl migration from a -N(SiMe3)2 ligand to the imide =NH ligand to give Li+(THF)2{Me3SiN(-)-M[NH(SiMe3)][N(SiMe3)2]2} (M = Zr, 4a; Hf, 4b) containing an imide =N(SiMe3) ligand. The kinetics of the 3a --> 4a conversion was investigated between 290 and 315 K and was first-order with respect to 3a. The activation parameters for this silyl migration are DeltaH++ = 13.3(1.3) kcal/mol and DeltaS++ = -34(3) eu in solutions of 3a (in toluene-d8 with 1.07 M THF) prepared in situ. THF in the mixed solvent promoted the 3a --> 4a reaction. The effect of THF on the rate constants of the conversion has been studied, and the kinetics of the reaction was 3.4(0.6)th order with respect to THF. Crystal and molecular structures of H2N-Zr[N(SiMe3)2]3 (2a) and 4a-b have been determined.     

Synthesis, structure, and reactivity of a stabilized calcium carbene: R(2)CCa

Attempted 2-fold deprotonation of the bis(iminophosphorano)methane ligand, H(2)C(Ph(2)P=NSiMe(3))(2) (4-H(2)), with a calcium amide led only to mono-deprotonation. The crystal structure of (4-H)(2)Ca shows two tridentate ligands with short Ca-N and a rather long Ca-C bond. Reaction of 4-H(2) with a dibenzylcalcium complex gave the desired 2-fold deprotonation and formation of 4-Ca, which crystallized as a dimeric complex. Analysis of the calculated atomic and group charges in 4-H(2), (4-H)(2)Ca, and [4-Ca](2) showed that the negative charge at the imine nitrogens only slightly increases upon successive deprotonation of 4-H(2). The electron density at the central carbon, however, increases considerably: the charge on the carbene carbon in [4-Ca](2) is ca. -1.8. The negative charge in 4(2)(-) is therefore mainly located on the carbon. Reaction of [4-Ca](2) with benzophenone in benzene gave the remarkably stable adduct [4-Ca](2) x O=CPh(2), which was characterized by X-ray diffraction. Reaction of [4-Ca](2) with adamantylcyanide gave exclusive formation of the adduct [4-Ca](2) x (N identical withCR)(2), which did not react further, even at higher temperatures. Addition of cyclohexyl isocyanate to a benzene solution of [4-Ca](2) gave immediate [2 + 2]-cycloaddition and formation of a dianionic tetradentate ligand that binds to Ca(2+) through two nitrogens, the central carbon, and an oxygen. This product crystallized as a dimer with bridging oxygen atoms.     

Rare earth metal complexes bearing thiophene-amido ligand: synthesis and structural characterization

2,6-diisopropyl-N-(2-thienylmethyl)aniline (H2L) has been prepared, which reacted with equimolar rare earth metal tris(alkyl)s, Ln(CH2SiMe3)3(THF)2, afforded rare earth metal mono(alkyl) complexes, LLn(CH2SiMe3)(THF)3 (:Ln=Lu; :Ln=Y). In this process, H2L was deprotonated by one metal alkyl species followed by intramolecular C-H activation of the thiophene ring to generate dianionic species L2- with the release of two tetramethylsilane. The resulting L2- combined with three THF molecules and an alkyl unit coordinates to Y3+ and Lu3+ ions, respectively, in a rare N,C-bidentate mode, to generate distorted octahedron geometry ligand core. Whereas, with treatment of H2L with equimolar Sc(CH2SiMe3)3(THF)2, a heteroleptic complex (HL)(L)Sc(THF) () was isolated as the main product, where the dianionic L2- species bonds to Sc3+ via chelating N,C atoms whilst the monoanionic HL connects to Sc3+ in an S,N-bidentate mode. All complexes have been characterized by NMR spectroscopy and X-ray diffraction analysis.     

Reactions of LiE(SiMe(3))(3), E = Si, Ge: X-ray Crystal Structure of the Cyclotetrastannane [ClSnSi(SiMe(3))(3)](4)

Reaction of SnCl(2).dioxane with 2 equiv of Li(THF)(3)Si(SiMe(3))(3) in hexane afforded the cyclotetrastannane [(Me(3)Si)(3)SiSnCl](4) in reasonable yield. From pentane, the product crystallized as a red-orange disolvate in the P&onemacr; space group (triclinic) with a = 14.735(2) ?, b = 14.976(2) ?, c = 24.066(3) ?, alpha = 76.94 degrees, beta = 76.19 degrees, gamma = 62.11 degrees, V = 4517.5 ?(3), and Z = 2. The Sn(4) ring consisted of a slightly distorted, nonplanar (fold angle = 18.9 degrees ) rectangle with Sn-Sn distances of 2.8054(6), 2.8111(6), 2.9122(6), and 2.9146(6) ?. The pentane molecules were disordered. Selected mono- and dihalogermanes were treated with 1 equiv of Li(THF)(3)Si(SiMe(3))(3) or Li(THF)(2.5)Ge(SiMe(3))(3), affording (Me(3)Si)(3)EGe(CF(3))(3) (E = Si, Ge) and (Me(3)Si)(3)GeGeR(3) (R = Cl, CH(3), C(6)H(5)). Besides the monosubstitution product, the reaction of GeCl(4) with 1 equiv of Li(THF)(2.5)Ge(SiMe(3))(3) also gave a small amount of the linear tetragermane (Me(3)Si)(3)GeGeCl(2)GeCl(2)Ge(SiMe(3))(3). Good yields of the analogous phenyl derivative, (Me(3)Si)(3)GeGePh(2)GePh(2)Ge(SiMe(3))(3), were obtained by treating Ph(2)GeCl(2) with 2 equiv of the lithium-germyl reagent.     

A well-defined hydrocarbon-soluble calcium hydroxide: synthesis, structure, and reactivity

Controlled hydrolysis of a (beta-diketiminate)calcium-amide gave a heteroleptic (beta-diketiminate)calcium-hydroxide complex that is remarkably stable against ligand exchange and formation of Ca(OH)2. The structure of this dimeric complex shows OH- units that symmetrically bridge the Ca2+ ions. This hydrocarbon-soluble calcium hydroxide reacted rapidly with CO2 to produce a gel from which amorphous CaCO3 slowly separated. This reaction behavior allows for sol-gel coating with CaCO3 from an organic solvent. Reaction with benzophenone did not lead to nucleophilic attack of OH- to the carbonyl but gave a red benzophenone adduct instead.     

Highly efficient ethylene polymerisation by scandium alkyls supported by neutral fac-kappa3 coordinated N3 donor ligands

Reaction of [M(CH2SiMe3)3(THF)2] (M = Sc or Y) with the neutral fac-kappa3 N3 donor ligands (L) Me3[9]aneN3 or HC(Me2pz)3 gave the corresponding trialkyls [M(L)(CH2SiMe3)3]; activation of the scandium congeners with B(C6F5)3 in the presence of ethylene afforded highly active polymerisation catalysts (Me3[9]aneN3 = 1,4,7-trimethyltriazacyclononane).     

Synthesis and reactivity of perhalogenated acyclic and metallacyclic tantalum(V) phosphoraniminato complexes: discovery of an unexpected ligand coupling reaction to form the novel phosphazenium salt

The reaction of TaCl5 with a single equivalent of Cl3P=NSiMe3 resulted in the isolation of the perhalogenated (phosphoraniminato) tantalum(V) complex TaCl4(N=PCl3) (1). Reaction of 1 with an excess of THF and subsequent cooling produced crystals of TaCl4(N=PCl3)(THF) (1.THF), which possesses a distorted octahedral Ta center with a THF molecule coordinated trans to the phosphoraniminato ligand. The reaction of 1 with the aminophosphoranimine, (Me3Si)2NPCl2=NSiMe3, resulted in a [3 + 1] cyclocondensation reaction to form the metallacyclic complex, TaCl3(N=PCl3)[N(SiMe3)PCl2N(SiMe3)] (2), which contains a TaNPN four-membered ring and a phosphoraniminato ligand (N=PCl3). The analogous [3 + 1] cyclocondensation reaction between (Me3Si)2NPCl2=NSiMe3 and TaCl5 led to the isolation of TaCl4[N(SiMe3)PCl2N(SiMe3)] (3). An attempt to cleave the NPN ligand from the Ta center in 2 via protonolysis with HCl led to an unusual phosphoraniminato ligand coupling reaction to yield the novel phosphazenium salt [N(PCl2NH2)2][TaCl6] (4). All new compounds (1.THF and complexes 1-4) were characterized by single-crystal X-ray diffraction.     

Stable heteroleptic complexes of divalent lanthanides with bulky pyrazolylborate ligands--iodides, hydrocarbyls and triethylborohydrides

The reaction of YbI(2) with KTp(Me2) gives (Tp(Me2))YbI(THF)(2) (1-Yb) as a thermally unstable product. Use of the more hindered KTp(tBu,Me) gave (Tp(tBu,Me))LnI(THF)(n) (Ln = Sm, n = 2, 2-Sm; Ln = Yb, n = 1, 2-Yb). The crystal structures of both these compounds are reported. Adducts with neutral ligands such as pyridines and isonitriles can be prepared and the crystal structures of [(Tp(tBu,Me))YbIL(n)] (L = CN(t)Bu, n = 1; L = 3,5-lutidine, n = 2) are described. 2-Sm can be oxidized using AgBPh(4) to give [(Tp(tBu,Me))SmI(THF)(2)]BPh(4). Compounds 2-Sm and 2-Yb are useful starting materials for the preparation of heteroleptic compounds by metathesis with appropriate potassium reagents. The preparations and characterization of the hydrocarbyls (Tp(tBu,Me))Ln{CH(SiMe(3))(2)} (Ln = Sm, 5-Sm; Yb, 5-Yb) and [(Tp(tBu,Me))Ln{CH(2)(SiMe(3))}(THF)] (Ln = Yb, 6a-Yb) and the triethylborohydrides [(Tp(tBu,Me))Ln(HBEt(3))(THF)(n)] (Ln = Sm, n = 0, 7-Sm; Yb, n = 1, 7-Yb) are reported, as well as the crystal structures of 5-Sm and 5-Yb, and the THF adducts 6a-Yb and [(Tp(tBu,Me))Sm{CH(SiMe(3))(2)}(THF)], 5a-Sm.     

C3-chiral tripodal amido complexes

A comprehensive study into the coordination chemistry of two C3-chiral tripodal amido ligands has been carried out. The amido ligands contain a trisilylmethane backbone and chiral peripheral substituents. The amine precursors. HC(SiMe2NH[(S)-1-phenylethyl]]3 (1) and HC[SiMe2NH[(R)-1-indanyl]]3 (2) were found to be in equilibrium in solution with the cyclic diamines HC[SiMe2N[(S)-1-phenylethyl]2](SiMe2NH-[(S)-1-phenylethyl]] (3) and HC[SiMe2NH[(R)-1-indanyl]][SiMe2NH[(R)-1-indanyl]) (4), which are generated upon ejection of one molecule of the chiral primary amine. Reaction of these equilibrium mixtures with three molar equivalents of butyllithium instantaneously gave the trilithium triamides HC[SiMe2N(Li)[(S)-1-phenylethyl]]3 (5) and HC[SiMe2N(Li)[(R)-1-indanyl]]3 (6), both of which were characterised by an X-ray diffraction study. Both lithium compounds possess a central heteroadamantane core, in which the two-coordinate Li atoms are additionally weakly solvated by the three aryl groups of the chiral peripheral substituents, the Li-C contacts being in the range of 2.65-2.73 A. Reaction of 5 and 6 with [TiCl4(thf)2] and ZrCl4 gave the corresponding amido complexes [TiCl-[HC[SiMe2N[(S)-1-phenylethyl]]3]] (7), [TiCl(HC[SiMe2N[(R)-1-indanyl]]3]] (8), [ZrCl[HC[SiMe2N[(S)-1-phenylethyl]]3]] (9) and [ZrCl[HC[SiMe2N[(R)-1-indanyl]]3]] (10), respectively. Of these, compound 7 was structurally characterised by X-ray structure analysis and was shown to possess a C3-symmetrical arrangement of the tripod ligand. The chiral anionic dinuclear complex [Li-(OEt2)4][Zr2Cl3[HC[SiMe2N[(S)-1-phenylethyl]]3]2] (11) was isolated from reaction mixtures leading to 9. An X-ray diffraction study established its dimeric structure, in which the chiral amido ligands cap the two metal centres, which are linked through three symmetrically arranged, bridging chloro ligands. Reaction of 9 and 10 with a series of alkyl Grignard and alkyllithium reagents yielded the corresponding alkylzirconium complexes. X-ray structure analyses of [Zr(CH3)[HC[SiMe2N[(S)-1-phenylethyl]]3]] (12) and [Zr(CH3)-[HC[SiMe2N)[(R)-1-indanyl]]3]] (20) established their detailed molecular arrangements. While the reaction of 12 with the aryl ketones PhC(O)R (R = CH = CHPh, iPr, Et) gave the corresponding C-O insertion products, which contain an additional chiral centre in the alkoxy group, with low stereoselectivity (0-40% de). The corresponding conversions with several aryl aldehydes yielded the alkoxo complexes with high stereoselectivity. Upon hydrolysis, the chiral alcohols were isolated and shown to have enantiomeric excesses between 68 and 82%. High stereodiscrimination was also observed in the insertion reactions of several chiral ketones and aldehydes. However, this was shown to originate primarily from the chirality of the substrate. In analogous experiments with carbonyl compounds, the ethyl- and butyl-zirconium analogues of 12 did not undergo CO insertion into the metal-alkyl bond. Instead, beta-elimination and formal insertion into the metal-hydride bond occurred. It was found that the elimination of the alkene was induced by     

Kinetic stability of heteroleptic (beta-diketiminato) heavier alkaline-earth (Ca, Sr, Ba) amides

The potential of the heteroleptic heavier alkaline-earth hexamethyldisilazides [{HC(C(Me)2N-2,6-iPr2C6H3)2}Ae{N(SiMe3)2}(THF)](Ae = Ca, Sr, Ba) as kinetically-stable reagents for further protolytic reaction chemistry has been assessed. Only the previously reported calcium complex was found to be stable to solution dismutation and dynamic ligand exchange. The barium complex was isolated in sufficient purity to enable characterisation by an X-ray analysis. Reactions of the kinetically robust calcium complex with cyclohexylamine and tert-butylamine resulted in displacement of THF and formation of solvated structures, which could be characterised by 1H NMR spectroscopy. Attempts to isolate these solvated complexes were unsuccessful due to redistribution to the homoleptic complex [{HC(C(Me)2N-2,6-iPr2C6H3)2}2Ca]. In contrast, the more acidic amine [H2NCH2CH2OMe] was cleanly deprotonated resulting in the isolation of the first well defined primary amido derivative of a heavier alkaline-earth element, [{HC(C(Me)2N-2,6-iPr2C6H3)2}Ca{NHCH2CH2OMe}]2, which retains its dimeric constitution in solution and is stable to further intermolecular ligand exchange. Reactions of [{HC(C(Me)2N-2,6-iPr2C6H3)2}Ca{N(SiMe3)2}(THF)] with a variety of ortho-disubstituted anilines also resulted in immediate protonation of the hexamethyldisilazide ligand. Only the most sterically demanding 2,6-diisopropylphenyl anilide derivative possessed sufficient kinetic stability to allow isolation of the heteroleptic complex. The crystal structure of [{HC(C(Me)2N-2,6-iPr2C6H3)2}Ca{N(H)-2,6-iPrC6H3}(THF)] was shown to exist as a mononuclear, pseudo-five-coordinate complex in which the coordinative unsaturation of the calcium centre is relieved by a Ca...H-C agostic-type interaction to one of the ortho isopropyl groups of the anilide ligand. This interaction is not maintained in solution however and the complex slowly redistributes to the homoleptic beta-diketiminato species and ill-defined polymeric calcium anilido products.     

Flexibility in the coordination chemistry of the 2,3-dimethylindolide ligand with potassium,yttrium, and samarium

The coordination chemistry of the 2,3-dimethylindolide anion (DMI), (Me(2)C(8)H(4)N)(-), with potassium, yttrium, and samarium ions is described. In the potassium salt [K(DMI)(THF)](n), 1, prepared from Me(2)C(8)H(4)NH and KH in THF, the dimethylindole anion binds and bridges potassium ions in three different binding modes, namely eta(1), eta(3), and eta(5), to form a two-dimensional extended structure. In the dimethoxyethane (DME) adduct [K(DMI)(DME)(2)](2), 2, prepared by crystallizing a sample of 1 from DME, DMI exists as a mu-eta(1):eta(1) ligand. Compound 1 reacts with SmI(2)(THF)(4) in THF to form the distorted octahedral complex trans-(DMI)(2)Sm(THF)(4), 3, in which the dimethyindolide anions are bound in the eta(1) mode to samarium. Reaction of 2,3-dimethylindole with Y(CH(2)SiMe(3))(3)(THF)(2) afforded the amide complex (DMI)(3)Y(THF)(2), 4, in which the dimethylindolide anions are also bound in the eta(1) mode to yttrium. Compound 1 also reacts with (C(5)Me(5))(2)LnCl(2)K(THF)(2) (Ln = Sm, Y) to form unsolvated amide complexes (C(5)Me(5))(2)Ln(DMI) (Ln = Sm, 5; Y, 6), in which DMI attaches primarily through nitrogen, although the edge of the arene ring is oriented toward the metals at long distances.     

Lanthanum and alkali metal coordination chemistry of the bis(dimethylphenylsilyl)amide ligand

The coordination chemistry of the bis(dimethylphenylsilyl)amide ligand, [N(SiMe2Ph)2]1-, with sodium, potassium, and lanthanum has been investigated for comparison with the more commonly used [N(SiMe3)2]1- and [N(SiHMe2)2]1- ligands. HN(SiMe2Ph)2 reacts with KH to produce KN(SiMe2Ph)2, 1, which crystallizes from toluene as the dimer [KN(SiMe2Ph)2(C7H8)]2, 2. The structure of 2 shows that the [N(SiMe2Ph)2]1- ligand can function as a polyhapto ligand with coordination from each phenyl group as well as the normal nitrogen ligation and agostic methyl interactions common in methylsilylamides. Each potassium in 2 is ligated by an eta4-toluene, two bridging nitrogen atoms, and an eta2-phenyl, an eta1-phenyl, and an eta1-methyl group. KN(SiMe2Ph)2 crystallizes from toluene in the presence of 18-crown-6 to make the monometallic complex (18-crown-6)KN(SiMe2Ph)2, 3, in which [N(SiMe2Ph)2]1- functions as a simple monodentate ligand through nitrogen. The reaction of HN(SiMe2Ph)2 with NaH in THF at reflux for 2 days generates Na[N(SiMe2Ph)2], 4, which crystallizes as the solvated dimer {(THF)Na[mu-eta1:eta1-N(SiMe2Ph)2]}2, 5. A lanthanide metallocene derivative of [N(SiMe2Ph)2]1- was obtained by reaction of K[N(SiMe2Ph)2] with [(C5Me5)2La][(mu-Ph)2BPh2]. Crystals of (C5Me5)2La[N(SiMe2Ph)2], 6, show agostic interactions between lanthanum and methyl groups of each silyl substituent. The [N(SiMe3)2]1- analogue of 3, (18-crown-6)KN(SiMe3)2, 7, was also structurally characterized for comparison.     

Phenoxytriamine complexes of yttrium: synthesis, structure and use in the polymerization of lactide and epsilon-caprolactone

Reaction of the phenoxytriamine proligands 2,4-dimethyl-6-bis(2-(diethylamino)ethyl)aminomethlyphenol (HL1) and 2,4-di-tert-butyl-6-bis(2-(diethylamino)ethyl)aminomethylphenol (HL2) with Y[N(SiMe2H)2]3(THF)2 in pentane gave the momomeric complexes L1Y[N(SiMe2H)2]2 (1) and L2Y[N(SiMe2H)2]2 (2). X-Ray structural analysis of 2 shows a 5-coordinate yttrium center. The complexes 1 and 2 catalyze the ring opening polymerization of d-l-lactide and epsilon-caprolactone leading to narrow product polydispersities under mild conditions.     

Synthesis and structural variations of substituted phenylamide complexes of the heavy alkaline earth metals calcium, strontium and barium

Starting material KN(H)C(6)H(3)-2,6-F(2) was prepared via a transamination reaction from KNH(2) and 2,6-F(2)C(6)H(3)NH(2) in THF and crystallized from 1,4-dioxane (diox) as the three-dimensional polymer [(diox)(1.5)K{N(H)-2,6-F(2)C(6)H(3)}.diox(0.5)](infinity) (1). The metathesis reaction of (THF)(4)CaI(2) with KN(Me)Ph in THF yields monomeric (THF)(4)Ca[N(Me)Ph](2) (2) with a nearly linear N-Ca-N moiety of 179.84(8) degrees . The metathesis reaction of (THF)(4)CaI(2) with KN(H)Mes yields trinuclear (THF)(6)Ca(3)[N(H)Mes](6) (3) with a linear Ca(3) fragment and bridging 2,4,6-trimethylphenylamido groups. The reaction of 1 with (THF)(4)CaI(2) gives dinuclear (THF)(5)Ca(2)[N(H)-2,6-F(2)C(6)H(3)](4).2THF (4) with three bridging and one terminally bound 2,6-difluorophenylamide. A similar reaction of (THF)(5)SrI(2) with KN(H)-2,6-F(2)C(6)H(3) yields dinuclear (THF)(6)Sr(2)[N(H)-2,6-F(2)C(6)H(3)](3)I.THF (5) in which the iodide anion binds terminally. This iodide ligand cannot be substituted as easily by excess KN(H)-2,6-F(2)C(6)H(3). The metathesis reaction of (THF)(5)BaI(2) with KN(H)-2,6-F(2)C(6)H(3) leads to the formation of [(THF)(2)Ba{N(H)-2,6-F(2)C(6)H(3)}(2)](infinity) (6) which crystallizes as a one-dimensional polymer with bridging 2,6-difluorophenylamide anions and additional Ba-F-bonds.