Simultaneous determination of aluminium and iron in glasses,phosphate rocks and cement using first- and second-derivative spectrophotometry

First- and second-derivative spectrophoto-metric methods for the simultaneous determination of aluminium and iron in their mixtures are described. The methods are based on the colored complexes formed by aluminium and iron with hematoxylin in the presence of cetyltrimethylammonium bromide as a surfactant. The zero-crossing method has been utilized to measure the first- and second-derivative value of the derivative spectrum. Aluminium (0.05-1 microg ml(-1)) could be determined in the presence of iron (0.09-1.6 microg ml(-1)) and vice versa. The detection limits of aluminium and iron are 0.01 and 0.09 microg ml(-1), respectively in the first-derivative mode and 0.014 and 0.1 microg ml(-1) in the second-derivative mode. The proposed method has been applied to the simultaneous determination of aluminium and iron in glasses, phosphate rocks, cement and magnesite alloy.     

Simultaneous determination of aluminium and iron in glasses,phosphate rocks and cement using first- and second-derivative spectrophotometry

First- and second-derivative spectrophoto-metric methods for the simultaneous determination of aluminium and iron in their mixtures are described. The methods are based on the colored complexes formed by aluminium and iron with hematoxylin in the presence of cetyltrimethylammonium bromide as a surfactant. The zero-crossing method has been utilized to measure the first- and second-derivative value of the derivative spectrum. Aluminium (0.05–1 gml^-1) could be determined in the presence of iron (0.09–1.6 gml^-1) and vice versa. The detection limits of aluminium and iron are 0.01 and 0.09 gml^-1, respectively in the first-derivative mode and 0.014 and 0.1 gml^-1 in the second-derivative mode. The proposed method has been applied to the simultaneous determination of aluminium and iron in glasses, phosphate rocks, cement and magnesite alloy.     

Simultaneous determination of iron(II), iron(III), and titanium(IV) by flow injection analysis using kinetic spectrophotometry with Tiron

Summary Two flow injection analysis systems have been worked out for the simultaneous determination of Fe(III), Fe(II), and Ti(IV) based on the kinetic spectrophotometry with Tiron. The first system uses a silver reductor column and a single detector with two flow cells aligned in the same optical path to yield two peaks corresponding to (a) Ti(IV)-Tiron and (b) Ti(IV) plus total iron(III)-Tiron complexes. An another sample injection without the silver column yields a single peak which corresponds to Ti(IV) plus Fe(III)-Tiron complexes. With the two sample aliquot injections the system permits simultaneous determinations with throughput of 30 samples/h in the g to several tens g range of each species. The second system is a multidetection system with or without the silver reductor column using the same spectrophotometry with Tiron, in which the entrapment of the sample plug into a closed system allows its repetitive passage through a single detector. With the advantage of much simpler instrumentation, the system permits 6 samples/h to be analyzed for the three metal species with somewhat lower precisions than the first system.     

Simultaneous determination of copper and iron by second derivative spectrophotometry using mixtures of ligands

A highly sensitive and selective second derivative spectrophotometric method has been developed for the determination of copper and iron in mixtures. The method is based on the separation of the analytes by liquid-liquid extraction as picrate ion pairs. Iron-picrate, reacts in the organic phase of DCE with 5-phenyl-3-(4-phenyl-2-pyridinyl)-1,2,4-triazine (PPT). Similarly the copper-picrate reacts with 2,9-dimethyl-4,7-diphenyl-1,10-phenantroline (bathocuproine). The extracts were evaluated directly by derivative spectrophotometric measurement, using the zero-crossing approach for determination of copper and graphic method for iron. Iron and copper were thus determined in the ranges 8-120 ng ml(-1) and 8-125 ng ml(-1), respectively, in the presence of one another. The detection limits achieved (3sigma) were 2.9 ng ml(-1) of iron and 2.8 ng ml(-1) of copper. The relative standard deviations were in all instances less than 2.1%. The proposed method was applied to the determination of both analytes in river and tap water and the results were consistent with those provided by the AAS standard method.     

分光光度法同时测定硅石中的铁和铝

在邻二氮菲(Phen)、铬天青S(CAS)和十四烷基二甲基苄基氯化铵(TDMBA)的共同存在下,于pH 5～6的酸性介质中,铁、铝分别生成Fe-Phen和Al-CAS-TDMBA络合物,用同一份试液,在波长510 nm测定铁,在625 nm测定铝,两种络合物互不干扰。用该法可同时测定硅石中的铁和铝。     

双波长分光光度法同时测定灌木饲料中的铁和铝

利用铁、铝与邻苯二酚紫（PCV）形成的络合物的最大吸收波长相差30nm的光谱性质，建立了同时测定铁和铝的双波长分光光度法，并对络合物的形成条件及相互干扰情况进行研究，方法用于灌木饲料样品中铁和铝测定。     

Accurate determination of trace amounts of thorium in silicate rocks by cation-exchange chromatography and spectrophotometry

Thorium in four of the South African NIMROC standards and in four secondary standards is determined accurately by means of spectrophotometry with arsenazo-III after a selective cation-exchange separation on an AG50W-X4 resin column. All other elements are eluted with 6 M hydrobromic acid before the final elution of thorium with 5 M nitric acid. Small amounts of zirconium which may be present in the thorium eluate, are effectively complexed with oxalic acid which also eliminates the spectrophotometric interferences caused by organic material leached from the resin column. The accuracy and precision of the method are demonstrated by the analysis of synthetic mixtures containing various amounts of thorium. Amounts of 10 and 100 μg of thorium can finally be determined with coefficients of variation of 1% and 0.2%, respectively.     

Simultaneous determination of cobalt,nickel and iron by multi-wavelength spectrophotometry

A method for the simultaneous spectrophotometric determination of cobalt, nickel and iron based on the formation of their complexes with 1,5-bis(di-2-pyridylmethylene) thiocarbonohydrazide is proposed. The absorption curves of these complexes overlap severely in the scanning range 390–510 nm. The analyte concentrations are calculated by a least squares fit of the pure spectra to the mixture spectra, which therefore makes the simultaneous determination of these metallic ions possible without tedious pretreatment. The detection limits afforded by the proposed method range from 0.05 g/ml for Fe and Ni to 0.1 g/ml for Co. Root-mean-squared errors of prediction of 0.085 g/ml for Co, 0.048 g/ml for Ni and 0.1172 g/ml for Fe were obtained using the wavelength range 400–510 nm and 0.147 g/ml for Co, 0.107 g/ml for Ni and 0.127 g/ml for Fe using the wavelength range 420–434 nm. The effect of interferences is studied and the proposed method is applied to analysis for the above elements in synthetic samples and real samples, such as biological materials and alloys.     

Simultaneous determination of fluorine and chlorine in silicate rocks by a rapid spectrophotometric method

A rapid accuiate method is described for simultaneous determination of fluorine and chlorine in silicate rocks by taking, separate aliquots of the single sample dissolution. Fluorine, without separation, was determined by means of the zirconium-criochrome cyanine R complex, whereas chlorine was determined by means of the stable iron (III) thiocyanate complex. The mctliod was tested with standard rocks. Results with geochemical standards were comparable with analyses reported by others. Application to several acidic, mafic, and ultramafic rock samples, gave results with a relative standard deviation of less than 5 %.     

Micelle mediated extraction of titanium and its ultra-trace determination in silicate rocks

A highly sensitive method for extractive spectrophotometric determination of titanium in silicate rocks is described. Titanium in the range 0-10 microg as TiO2 is extracted into benzene or toluene by the formation of a ternary complex of the metal with thiocyanate (SCN-) and cetyltrimethylammonium bromide (CTA) in the ratio 1:2:2. A deep yellowish-orange ternary complex thus formed is suitable for the determination of titanium at wavelength 421 nm. The optimum colour intensity of this ternary complex was attained when the complex was extracted from an aqueous solution having concentrations of thiocyanate and HCl, in the range, 1.5-2.5 and 1-5 mol L(-1), respectively. The molar absorptivity and Sandell's sensitivity of the extracted species were found to be 1.1-1.0x10(5) L mol(-1) cm(-1) and 0.47 ng cm(-2) (referred to titanium), respectively, at lambda(max) of 421 nm. Except Fe3+, Nb5+ and V5+, no interference was encountered in the estimation of titanium. While up to 10 mg L(-1) Nb and V did not interfere in the determination of titanium, the interference of Fe(3+) was eliminated by reducing it to Fe2+ using SnCl2 solution. The method is highly sensitive and selective. The results obtained for titanium estimation in a host of silicate rock samples have been found to be highly reproducible, accurate and favourably comparable with certified values of reference materials and those obtained from standard methods.     

Simultaneous determination of titanium and molybdenum in steel samples using derivative spectrophotometry in neutral micellar medium

A simple, selective and sensitive spectrophotometric method has been developed for the individual and simultaneous determination of Ti(IV) and Mo(VI) using resacetophenone p-hydroxybenzoylhydrazone (RAPHBH) in presence of Triton X-100, without any prior separation. Beer's law is obeyed between 0.13-1.2 microg mL-1 and 0.18-1.90 microg mL-1 concentration of Ti(IV) and Mo(VI) at 455 nm and 405 nm, respectively. The molar absorptivity and Sandell's sensitivity of the coloured complexes at pH 3.0 are 3.1x10(4) L mol-1 cm-1, 4.2x10(4) L mol-1 cm-1, and 1.6 ng cm-2, 2.3 ng cm-2 for Ti(IV) and Mo(VI), respectively. The stoichiometry of the complexes were found to be 1:2 and 1:1 (metal:ligand) for Ti(IV) and Mo(VI), respectively. These metal ions interfere with the determination of each other in zero-order spectrophotometry. The first derivative spectra of these complexes permitted a simultaneous determination of Ti(IV) and Mo(VI) at zero crossing wavelengths of 500.0 nm and 455.0 nm, respectively. The effect of foreign ions in the determination of Ti(IV) and Mo(VI) were investigated. The proposed method has been successfully applied for the determination of titanium and molybdenum in standard alloy steel, mineral and soil samples.     

Simultaneous determination of iron(II) and iron(III) in aqueous solution by kinetic spectrophotometry with tiron

A kinetic spectrophotometric method that requires no prior measurement of rate constants is developed for the simultaneous determination of iron(II) and iron(III). The method is based on the aerial oxidation of iron(II) in the presence of tiron and acetate ions. The iron(III) formed is subsequently complexed with tiron and the absorbance/time relation is evaluated. The concentrations of iron(III) and iron(II) are obtained from the absorbance values at the start and at equilibrium, respectively, calculated by non-linear least-squares fitting. A linear calibration graph is obtained up to 12 μg ml^?1 iron(II)/iron(III). The method is applied to iron-rich ground water.     

Simultaneous determination of iron, cobalt, nickel and copper by UV-visible spectrophotometry with multivariate calibration

A method for the simultaneous spectrophotometric determination of the divalent ions of iron, cobalt, nickel and copper based on the formation of their complexes with 1,5-bis(di-2-pyridylmethylene) thiocarbonohydrazide (DPTH) is proposed. The resolution of quaternary mixtures of these metallic ions was accomplished by several chemometric approaches. A comparative study of the results obtained for simultaneous determinations in mixture by using principal component regression (PCR) and partial least-squares regression (PLS-1 and PLS-2) for absorbance, first-derivative and second-derivative data is presented. In general, the best recovery values are obtained by the PLS-2 method for absorbance data. This procedure allows the simultaneous determination of the cited ions in alloys and biological materials Good reliability of the determination was proved.     

Simultaneous determination of iron and ruthenium as ternary complexes by extractive second derivative spectrophotometry

A highly sensitive and selective second derivative spectrophotometric method has been developed for the determination of ruthenium and iron in mixtures. The method is based on the formation of the binary complexes of iron and ruthenium with 4,7-diphenyl-1,10-phenanthroline (bathophenanthroline) in the presence of ethyleneglycol. These complexes are formed at pH 4.0-6.0 upon heating at 90 degrees C for 60 min. The ternary perchlorate complexes are then separated by liquid-liquid extraction. The extracts were evaluated directly by derivative spectrophotometric measurement, using the zero-crossing approach for determination of both analytes. Ruthenium and iron were thus determined in the ranges 9.6-450 and 16.3-280 ng/ml, respectively, in the presence of one another. The detection limits achieved (3sigma) were found to be 2.9 ng/ml of ruthenium and 4.9 ng/ml of iron. The relative standard deviations were in all instances less than 1.5%. The proposed method was applied to the determination of both analytes in synthetic mixtures.     

双波长分光光度法测定铝土矿中微量磷

建立了双波长分光光度法测定铝土矿中微量磷的方法。探讨并优化了测定波长、Mo(Ⅵ)和Mo(Ⅴ)浓度、显色酸度等条件,与国家标准分析方法对照,测定结果较满意,适用于二氧化硅含量小于45%的铝土矿石或硅酸盐中微量磷的测定。     

Simultaneous determination of silicate and phosphate in boiler water at power plants based on series flow cells by using flow injection spectrophotometry

A new flow injection spectrophotometric method is described for the simultaneous determination of silicate and phosphate. Effects on the sensitivity of the method of the wavelength, temperature, length of reaction coils, pump rates, acidity, sampling volume, concentration of the chromogenic reagent, etc. were also investigated. The optimum conditions were ascertained.The principle of the method is that total concentration of silicate plus phosphate is determined when a injected sample plug is passing through the first flow cell and then the concentration of silicate is serially) determined at a second flow cell of the same detector after continuously masking the yellow molybdophosphate in the sample zone. Finally, the concentration of phosphate is obtained by difference.Silicate and phosphate are determined in boiler water at power plants; 60-120 samples h⁻¹ be analyzed. Determination ranges are 0.05-22 mg l⁻¹ for silicate and 0.1-24 mg l⁻¹ for phosphate. Relative standard deviations for metasilicate and orthophosphate were ≤1.2 and 1.3%, respectively. Recovery ranges of silicate and phosphate in the samples are 98-103%.     

Simultaneous determination of copper and cobalt with methylethylenediaminetetraacetic acid using derivative spectrophotometry

The application of derivative Spectrophotometry to the simultaneous determination of copper(II) and cobalt(II) with methylethylenediaminetetraacetic acid is described. The procedure does not require equations to be solved, and is suitable for concentrations of 0.2–8.0 mg ml⁻¹ of cobalt and 0.05–1.60 mg ml⁻¹ of copper. The main interferences, both anionic and cationic, are easily eliminated.     

Simultaneous determination of beryllium and aluminium in mixtures using derivative spectrophotometry

The spectrophotometric determination of beryllium and aluminium with 5,8-dihydroxy-1,4-naphthoquinone in the presence of a non-ionic surfactant is reported. Absorption maxima, molar absorptivity and Sandell's Sensitivity of 1:2 (M:L) beryllium and aluminium complexes are, 585 nm and 598 nm, 1.63 x 10(4) l.mole(-1).cm(-1) and 2.04 x 10(4) l.mole(-1).cm(-1), and 0.55 ng/cm(2) and 1.32 ng/cm(2) respectively. Beer's law is obeyed between 7.20-3.96 x 10(2) ng/ml beryllium and 1.08 x 10(1)-1.08 x 10(3) ng/ml aluminium. A method for simultaneous determination of beryllium and aluminium in their mixture using derivative spectra is described. The range 3.6 x 10(1)-3.6 x 10(2) ng/ml beryllium could be determined in the presence of 1.08 x 10(2)-1.08 x 10(3) ng/ml aluminium, and vice versa.