硫脲衍生物有机催化蒽酮与硝基烯烃的不对称Michael加成反应

将硫脲衍生物用于有机催化蒽酮和β-硝基烯烃的不对称Michael加成反应.考察溶剂、温度及催化剂用量等对反应催化性能的影响.结果表明,最佳催化条件为5%(摩尔百分数)催化剂1f,二氯甲烷为溶剂,室温反应.得到了80%~97%的化学产率和最高达99%ee的对映选择性.     

Microwave assisted highly efficient one-pot multi-component synthesis of novel 2-(tetrasubstituted-1H-pyrrol-3-yl)-4H-chroman-4-ones catalyzed by heterogeneous reusable silica gel supported polyphosphoric acid (PPA/SiO2)

A solvent-free, eco-friendly and facile approach for the synthesis of highly functionalized tetrasubstituted pyrroles has been reported through one-pot four-component reaction of aldehyde, amine, nitroalkane and 1,3-diketone using silica gel supported polyphosphoric acid (PPA–SiO₂) under microwave condition. The reaction occured through the in situ formation of β-keto enamine and nitrostyrene analog following Michael addition and finally intramolecular annulation affording the products in good yields. The key features of the present method include clean reaction, mild conditions, low catalyst loading, straightforward, high to excellent yields, short reaction time, avoiding use of harmful metal catalyst and organic solvent, environmentally friendly compared to the existing methods, recovery and reusability of catalyst and easy workup procedure.     

Asymmetric reduction of aromatic ketones in pyridinium-based ionic liquids

The asymmetric reduction of aromatic ketones has been studied in pyridinium-based room temperature ionic liquids, namely, 1-ethyl-pyridinium tetrafluoroborate, [EtPy]⁺[BF₄]⁻ and 1-ethyl-pyridinium trifluoroacetate, [EtPy]⁺[CF₃COO]⁻. Ionic liquids were employed as solvents, while (R)-BINOL and (R)-BINOL-Br were used as chiral promoters. The effects of solvent, reaction time, temperature, catalyst loading and substituents were investigated. The reduction could be easily carried out in both ionic liquids with lower catalyst loading. 1-Ethyl-pyridinium tetrafluoroborate was recycled and reused efficiently.     

Optimization of Microwave-Assisted Michael Addition Reaction Catalyzed by L-Proline in Ionic Liquid Medium Using Response Surface Methodology

Michael addition reactions of aldehyde to β-nitrostyrene catalyzed by L-proline were investigated by using controlled, monomode microwave-assisted technique in a closed vessel system. Ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim]NTf₂) was used as the reaction medium to replace the commonly used volatile organic solvents and as a good absorbing solvent during Michael reaction under the influence of microwave irradiation. The Michael product is clean and generates good yields in short reaction times with moderate results on enantioselectivity (ee). In this work, optimization of proline-catalyzed Michael reaction was carried out using response surface methodology (RSM) based on a three-factor-three-level central composite design (CCD). Various reaction parameters including catalyst loading (5–30 mol%), reaction time (5–40 min), and substrate (2–5 equivalent ratio) were investigated. A high Michael yield (96.5%) with 36.9 ee% was obtained at the optimum conditions of 10.0 mol% catalyst loading, 5.0 min reaction time, and 2.0 substrate equivalent ratio.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Asymmetric Michael reactions of α-substituted acetates with cyclic enones catalyzed by multifunctional chiral Ru amido complexes

Well-defined 16-electron chiral Ru amido complexes, Ru[(R,R)-diamine](η⁶-arene), efficiently catalyze asymmetric Michael additions of Michael donors to cyclic enones to give adducts in high yields and with excellent ee’s. β-Ketoesters or nitroacetate as Michael donors react with 2-cyclopentenone in toluene or t-butyl alcohol containing the Ru amido catalyst (S/C=50) to afford the Michael adduct in 99% yield and with up to 92% ee. The outcome of the reaction was delicately influenced by the structures of the diamine and arene ligands as well as reaction conditions.     

Development of sequential type iron salt-catalyzed Nazarov/Michael reaction in an ionic liquid solvent system

Sequential type one pot Nazarov/Michael reaction of pyrrole derivatives has been demonstrated using 5 mol% Fe(ClO4)3·Al2O as catalyst in an ionic liquid as solvent. We succeeded in obtaining 4,5-dihydrocyclopenta[b]pyrrol-6(1H)-one derivative in good yield for five repetitions of the reactions without any addition of the catalyst using an ionic liquid, [bmim][NTf2], as solvent system.     

Optimization of polystyrene-supported triphenylphosphine catalysts for aza-Morita-Baylis-Hillman reactions

A series of polar group functionalized polystyrene-supported phosphine reagents were examined as catalysts in the aza-Morita-Baylis-Hillman reactions of N-tosyl arylimines and a variety of Michael acceptors with the aim of identifying the optimal polymer/solvent combination. For these reactions JandaJel-PPh₃ (1 mmol PPh₃/g loading) resin containing methoxy groups (JJ-OMe-PPh₃) on the polystyrene backbone in THF solvent provided the highest yield of all the catalyst/solvent combinations examined. The methyl ether groups were incorporated into JJ-OMe-PPh₃ using commercially available 4-methoxystyrene, and thus such polar polystyrene resins are easily accessible and should find utility as nucleophilic catalyst supports.     

Bifunctional thiophosphinamide catalyzed highly enantioselective Michael addition of acetone to (E)-2-azido β-nitrostyrenes and the subsequent reductive cyclization

We have proven that primary amine/thiophosphinamide incorporating (1R,2R)-1,2-diphenylethane-1,2-diamine is an efficient catalyst for the asymmetric Michael addition of acetone to (E)-2-azido β-nitrostyrenes. Under the optimal reaction conditions, the corresponding Michael addition products were obtained in excellent yields with almost perfect stereocontrol. Upon treatment with Et₃SiH/InCl₃, the Michael addition products could be successfully converted to the related 2-methyltetrahydroquinolines in acceptable yields with moderate to excellent diastereoselectivity and without appreciable loss in optical purity. This process provides a highly enantioselective pathway for the synthesis of biologically important 2-methyltetrahydroquinoline derivatives.     

Immobilization of Pseudomonas fluorescens Lipase onto Magnetic Nanoparticles for Resolution of 2-Octanol

The lipase from Pseudomonas fluorescens (Lipase AK, AKL) was immobilized onto the magnetic Fe₃O₄ nanoparticles via hydrophobic interaction. Enzyme loading and immobilization yield were determined as 21.4?±?0.5?mg/g and 49.2?±?1.8?%, respectively. The immobilized AKL was successfully used for resolution of 2-octanol with vinyl acetate used as acyl donor. Effects of organic solvent, water activity, substrate ratio, and temperature were investigated. Under the optimum conditions, the preferred isomer for AKL is the (R)-2-octanol and the highest enantioselectivity (E?=?71.5?±?2.2) was obtained with a higher enzyme activity (0.197?±?0.01???mol/mg/min). The results also showed that the immobilized lipase could be easily separated from reaction media by the magnetic steel and remained 89?% of its initial activity as well as the nearly unchanged enantioselectivity after five consecutive cycles, indicating a high stability in practical operation.     

NH2SO3H–SiO2 as a new water‐compatible,recyclable heterogeneous catalyst for the synthesis of novel (α,β‐unsaturated) β‐amino ketones via aza‐Michael reaction

NH₂SO₃H–SiO₂/water as a novel catalytic system was used for the synthesis of (α,β‐unsaturated) β‐amino ketones via aza‐Michael reaction at reflux conditions. The methodology was of general applicability and the catalyst exhibited activity up to five cycles. The catalyst was characterized for the first time using FT‐IR, X‐ray diffraction and scanning electron microscopic–energy dispersion analytical X‐ray. The stability of the catalyst was evaluated by differential scanning calorimetry and TGA/differential thermal analysis. High efficiency of the catalyst along with its recycling ability and the rather low loading demonstrated in reactions are the merits of the presented protocol. Copyright © 2013 John Wiley & Sons, Ltd.     

Michael reaction of 1,3-dicarbonyls with enones catalyzed by a hydroxyapatite-bound La complex

A hydroxyapatite-bound La complex, which functioned as an efficient heterogeneous catalyst for the Michael reaction of 1,3-dicarbonyls with enones under aqueous or solvent-free conditions, was prepared using a cation-exchange method. Further application to an asymmetric version by a fluoroapatite-bound La complex catalyst modified with (R,R)-tartaric acid is also described.     

A copper(II)-catalyzed,sequential Michael–aldol reaction for the preparation of 1,2-dihydroquinolines

A copper(II)-catalyzed, sequential Michael addition-aldol condensation reaction of N-carboxybenzyl-protected aminobenzaldehyde with various α,β-unsaturated N-acyl pyrroles is described. Substrate scope was found to include both aryl and aliphatic N-acyl pyrroles as the Michael acceptors, and isolated product yields as high as 93% were observed. The use of acetonitrile as the reaction solvent proved to be crucial for catalysis, both to function as a labile ligand for copper, as well as an agent to minimize hydrolytic catalyst poisoning.     

Promotional effect of Cu additive for the selective catalytic oxidation of n-butylamine over CeZrOx catalyst

The catalytic elimination of nitrogen-containing volatile organic compounds （NVOCs） still encounters bottlenecks in NO_xformation and low N₂selectivity.Here,a series of Cu-promoted Ce-Zr mixed oxide catalysts were synthesized using a simple precipitation approach,and n-butylamine was adopted as the probe pollutant to evaluate their catalytic performance.The Ce Cu_10%Zr O_xcatalyst exhibited the best catalytic activity,with 100%n-butylamine conversion and ...     

Mechanochemistry and Eco-Bases for Sustainable Michael Addition Reactions

The Michael addition reaction was revisited with a full focus on sustainability combined with efficiency, using mechanochemistry in mild conditions. First, the synthesis of cyclopentenone derivatives was chosen as a model reaction to find optimal conditions in mechanochemistry while using classical but weak bases. The reaction was efficient (84–95% yields), fast (2–6 h), solvent free, and required 0.1 equivalent of base. Aiming to reach greener conditions, classical bases were then replaced using new bio-sourced bases, called Eco-bases, that were easily prepared from plants and led to heterogeneous catalysts. The composition and structure of Eco-bases were characterized by MP-AES, XRPD, EBSD/EDS, HRTEM/EDX and ion chromatography. Interestingly, a high ratio of potassium was observed with the presence of K₂Ca(CO₃)₂ for the most effective Eco-base. The new Eco-bases were used for the mechanical-assisted construction of functionalized alkenone derivatives. The versatility of the method has been successfully applied with good to excellent yields to different Michael donors and acceptors. Eco-bases were recycled and reused four times with the same performances. Combining Eco-bases and mechanochemistry in Michael addition reactions allowed reaching a maximum degree of sustainability (efficient, rapid, low catalyst loading, solvent-free reactions with bio-sourced catalysts) and participating in the development of mechanochemistry in sustainable chemistry.     

Zinc catalyst recycling in the preparation of (all-rac)-α-tocopherol from trimethylhydroquinone and isophytol

Recycling of ZnCl₂ as a catalyst in the cyclocondensation of trimethylhydroquinone and isophytol to all-rac-α-tocopherol was studied. ZnCl₂ was recycled at over 98 % efficiency in required purity by repeated extraction of the reaction streams with water, followed by switching of solvent to butyl acetate and then back to water. Recycled ZnCl₂ had no negative effect on the yield of all-rac-α-tocopherol (maintaining over 90 %) at nearly total conversion of isophytol and only a 3 % molar excess of trimethylhydroquinone.     

Magnetically water‐dispersible and recoverable rhodium organometallic catalyst derived from Wilkinson's catalyst for promoting organic reactions

A novel magnetic rhodium catalyst was prepared through immobilizing Wilkinson's catalyst on the surface of silica‐coated iron oxide nanoparticles. After (thio)diphenylphosphine (─S&─PPh₂) was modified on the surface of the silica‐coated iron oxide nanoparticles, tris(triphenylphosphine)rhodium(I) chloride was employed to synthesize the Rh(Cl)(PPh₃)₂(Ph₂P&─S&─) complex, affording a rhodium loading of 0.16 mmol g⁻¹. The Rh(I) organometallic magnetic nanoparticles form a novel class of heterogeneous catalyst which is particularly suitable for the practice of organic synthesis. The prepared system exhibits high catalytic efficiency in Suzuki–Miyaura and Miyaura–Michael reactions in ethanol–water solution. High yield, low reaction times, use of green solvents and non‐toxicity of the catalyst are the main merits of this protocol. Also, magnetic separation is an environmentally friendly alternative for the recovery of the catalyst, since it minimizes energy and catalyst loss by preventing mass loss and oxidation. The produced catalyst was characterized using a variety of techniques.     

Catalytic asymmetric carbon–carbon bond forming reactions catalyzed by tetrahydroisoquinoline (TIQ) N,N′-dioxide ligands

The use of TIQ-N,N′-dioxide ligands in asymmetric C–C bond forming reactions is described. In the Michael addition of cyclohexane-1,3-dione and malonates to β,γ-unsaturated α-ketoesters, excellent yields (up to 93%) and moderate to good enantioselectivities (70–89% ee) were obtained. The catalytic hetero-ene reaction of 2-methoxypropene with phenylglyoxal gave the ene product in excellent yield (95%) with moderate enantioselectivity (77% ee). The catalyst system performed well at temperatures ranging from 0 to 30 °C and relatively low catalyst loading (0.2–5 mol %) with dichloromethane being the preferred solvent for all reactions.     

Deep eutectic solvent promoted highly efficient synthesis of N,N’-diarylamidines and formamides

A deep eutectic solvent was used as a dual catalyst and reaction medium for the efficient N-formylation of aromatic amines without hazardous organic solvent and catalyst. Treatment of aromatic amines with trimethyl orthoformate and formic acid in deep eutectic solvent at 70 °C gives the corresponding N-formyl derivatives in good to excellent yields. This simple ammonium deep eutectic solvent, easily synthesized from choline chloride and SnCl₂, with 100% atom economy and making it applicable to industry and laboratory. Furthermore, heating the trimethyl orthoformate and aromatic primary amines in the deep eutectic solvent results in formation of the corresponding N,N’-diarylamidines in high yields.     

Highly efficient synthesis of dicoumarols and xanthene derivatives in presence of Brønsted–Lewis acidic ionic liquids catalyst

A series of metal chloride-based acidic ionic liquids have been prepared and used as an efficient catalyst in one-pot multicomponent synthesis of biscoumarins and substituted xanthenes derivatives under solvent-free conditions. Among the acidic ionic liquids, N-methylpyrrolidonium zinc chloride (Hnmp/ZnCl₃)-based Brønsted–Lewis acidic ionic liquids were found to be an effective and recyclable catalyst for a one-pot synthesis of biscoumarins through the domino Knoevenagel–Michael reaction of a variety of aldehydes with 4-hydroxycoumarin in short reaction times. The reactions which occur under relatively mild conditions afforded the biscoumarin derivatives employing a very low loading of catalyst in satisfactory isolated yields and high purity after simple work-up. The Brønsted–Lewis acidic ionic liquid catalyst was reused four times without any variation in yield.     

Modified palladium-catalyzed regioselective ortho-arylation of sp C-H bond substrates with a low catalyst loading

A novel and generally applicable system for ortho-arylation of a broad range of sp² C-H bond substrates such as arylated benzoxazoles, acylated anilines, and pyridines has been developed. The arylation was performed in trifluoroacetic acid (TFA) under air by using PdCl₂ as the catalyst with a low catalyst loading of 1 mol %. And it was found for the first time that the addition of weak base K₃PO₄ to the acidic solvent could remarkably enhance the reaction rate. The arylated products were isolated in moderate to good yields with high regioselectivity for the substrates containing a meta-substituent. This arylation is tolerant with various functional groups such as CH₃, CH₃O, CH₃CO, Br, and Cl.