Iron-catalyzed cross-coupling of imidoyl chlorides with Grignard reagents

[reaction: see text] A general, high yielding rapid iron-catalyzed cross-coupling reaction between Grignard reagents and imidoyl chlorides is described. These reactions are typically completed within 5 min, resulting in high yields of 71-96% using 5% iron catalyst in a THF-NMP solvent mixture. Functionalized imidoyl chlorides (e.g., R = CO(2)Me) gave excellent yields (89%).     

Palladium-catalyzed desulfinylative C-C allylation of Grignard reagents and enolates using allylsulfonyl chlorides and esters

2-Methylprop-2-ene-, prop-2-ene-, 1-methylprop-2-ene-, and (E)-but-2-enesulfonyl chlorides have been used as electrophilic partners in desulfinylative palladium-catalyzed C-C coupling with Grignard reagents and sodium salts of dimethyl malonate and methyl acetoacetate. Neopentyl alk-2-ene sulfonates can also be used as electrophilic partners in desulfinylative allylic arylations and allylic alkylations. The regioselectivity of the allylic arylation and alkylation depends on the nature of the catalyst. With PdCl₂(PhCN)₂, (E)-crotyl derivatives are formed in high regioselectivity using either 1-methylprop-2-ene- or (E)-but-2-enesulfonyl chloride.     

An unprecedented iron-catalyzed cross-coupling of primary and secondary alkyl Grignard reagents with non-activated aryl chlorides

The use of N-heterocyclic carbene ligands in the iron-catalyzed cross-coupling of alkyl Grignards has allowed, for the first time, coupling of non-activated, electron rich aryl chlorides. Surprisingly, the tetrahydrate of FeCl₂ was found to be a better pre-catalyst than anhydrous FeCl₂. Primary Grignard reagents coupled in excellent yields while secondary Grignard reagents coupled in modest yields. The use of acyclic secondary Grignard reagents resulted in the formation of isomers in addition to the desired product. These isomeric products were formed via reversible β-hydrogen elimination, indicating that the cross-coupling proceeds through an ionic pathway.     

P-Triazinylphosphonium chlorides as a new group of coupling reagents

Tertiary phosphines in reaction with 2-chloro-4,6-dialkoxy-1,3,5-triazines gave unstable quaternary P-triazinylphosphonium chlorides, which readily decomposed with a departure of the alkyl group of the triazine ring substituent. Stable quaternary P-triazinylphosphonium chlorides were obtained only in reaction of 2-chloro-4,6-diphenoxy-1,3,5-triazine. Both, stable quaternary P-triazinylphosphonium chlorides as well unstable analogues prepared in situ activated carboxylic acid yielding “superactive” triazine esters, useful as highly efficient reagents in peptide bond synthesis.      

Remarkable hydrogen storage properties for nanocrystalline MgH2 synthesised by the hydrogenolysis of Grignard reagents

The possibility of generating MgH(2) nanoparticles from Grignard reagents was investigated. To this aim, five Grignard compounds, i.e. di-n-butylmagnesium, tert-butylmagnesium chloride, allylmagnesium bromide, m-tolylmagnesium chloride, and methylmagnesium bromide were selected for the potential inductive effect of their hydrocarbon group in leading to various magnesium nanostructures at low temperatures. The thermolysis of these Grignard reagents was characterised in order to determine the optimal conditions for the formation of MgH(2). In particular, the use of di-n-butylmagnesium was found to lead to self-assembled and stabilized nanocrystalline MgH(2) structures with an impressive hydrogen storage capacity, i.e. 6.8 mass%, and remarkable hydrogen kinetics far superior to that of milled or nanoconfined magnesium. Hence, it was possible to achieve hydrogen desorption without any catalyst at 250 °C in less than 2 h, while at 300 °C, hydrogen desorption took only 15 min. These superior performances are believed to result from the unique physical properties of the MgH(2) nanocrystalline architecture obtained after hydrogenolysis of di-n-butylmagnesium.     

Reactions of methylchlorodisilanes with Grignard reagents

Reactions of Cl₂MeSiSiMeCl₂ with RMgCl make it possible to obtain and isolate pure disilanes containing a smaller number of functional groups, namely, RMeClSiSiMeCl₂ (R = Ph), RMeClSiSiMeRCl (R = Prⁱ, Ph), and R₂MeSiSiMeRCl (R = Buⁱ). The reaction of Cl₂MeSiSiMeCl₂ with BuⁿMgCl is the least selective. The chlorides obtained were reduced with LiAlH₄ into the corresponding hydrides.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 954–957, May, 1995.     

Manganese-catalyzed oxidative homo-coupling of aryl Grignard chlorides

Manganese-catalyzed homo-coupling of aryl magnesium chlorides to give biphenyls was successfully achieved using manganese chloride as catalyst. A variety of aryl magnesium chlorides were efficiently converted into the corresponding symmetrical biaryls using 10 mol% MnCl₂ as catalyst in the presence of a stoichiometric amount of 1,2-dichloroethane. Since the aryl chlorides, from which the Grignard reagents were prepared, are cheaper and more readily available that the corresponding bromides and iodides this procedure should become the method of choice for preparing symmetrical biaryls.     

Iron-catalyzed alkylation of alkenyl Grignard reagents

The first iron-catalyzed cross-coupling reaction between alkenyl Grignard reagents and n- or s-alkyl bromides is described. The reaction is stereoselective and takes place in the presence of 5 mol % of [Fe(acac)3/TMEDA/HMTA] (1:2:1) under very mild conditions (THF, 0 degrees C, 45 min).     

Kinetic resolution of racemic Grignard reagents by nickel-catalyzed asymmetric Grignard cross-coupling

Racemic Grignard reagents, 2-phenylpropylmagnesium chloride and 2-norbornylmagnesium chloride were kinetically resolved by asymmetric cross-coupling with vinyl bromides in the presence of chiral phosphine-nickel catalysts to give optically active coupling products (~37% ee) and carboxylic acids after carbonation with carbon dioxide.     

Remarkable tris(trimethylsilyl)silyl group for diastereoselective [2 + 2] cyclizations

[reaction: see text] Diastereoselective [2 + 2] cyclizations of aldehyde- and ketone-derived silyl enol ethers with acrylates is described. The use of the tris(trimethylsilyl)silyl group allows for unprecedented reactivity, yields, and selectivity for these cyclizations. The presence of silicon-silicon bonds proved to be important for this transformation, where typical silyl groups (TBS and TIPS) failed to give any desired product. The bulky bis(2,6-diphenylphenoxide) aluminum triflimide catalyst was essential for high diastereoselectivity.     

Leaving group effect in the sulfonyl transfer reactions of aryl benzenesulfonates with Grignard reagents

The C–S coupling reactions of aryl benzenesulfonates with phenylmagnesium bromide in THF:toluene (7:10) at 90 °C have been studied. A Hammett-type kinetic study of the leaving group effect of aryloxy groups provides a conclusive support for a two step addition-elimination mechanism in which C–S bond formation is rate determining step.     

Reaction of furfurylidene acetone with Grignard reagents

The interaction of furfurylidene acetone with methylmagnesium iodide and ethylmagnesium halides has been studied. In the first case 2-methyl-4-(2-furyl)-3-buten-2-ol is formed as the product of 1,2-addition (yield 73 %). In the second case 4-(2-furyl)-2-hexanone (42 %) is the result of 1,4-addition, whereas 3-methyl-5-(2-furyl)-3-heptanol (45 %) is formed by consecutive 1,2- and 1,4-addition. In all cases the products of 1,3-addition were found.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 921–923, May, 1993.     

Iron-catalyzed oxidative homo-coupling of aryl Grignard reagents

[reaction: see text] Iron-catalyzed homo-coupling of aryl Grignard reagents was successfully developed. A variety of aryl Grignard reagents were efficiently converted into the corresponding symmetrical biaryls in the presence of 1-5 mol % FeCl3 and a stoichiometric amount of 1,2-dichloroethane.     

Reactions of Grignard reagents with 1,3-dicyanoadamantane

Reactions of Grignard reagents RMgX (R = Me, Et, Pr, Bu; X = Br, I) with 1,3-dicyanoadamantane (1) were studied. Optimum conditions for the synthesis of monoaddition products of Grignard reagents to compound 1 were established. The first stage of the reaction of cyanoadamantane 1 with MeMgBr was studied by the MNDO-PM3 method. According to calculations, the more preferable reaction mechanism involves formation of a six-membered cyclic intermediate containing two Mg atoms, two C atoms, and one Br and one N atom.     

Reactions of pentafluorophenylgermanium hydrides with Grignard reagents

Dendritic and cross-linked polyphenylenepolygermanes have been obtained by reactions of EtMgBr with (C₆F₅)₃GeH and (C₆F₅)₂GeH₂, respectively. The reaction of sodium naphthalenide with trihydride C₆F₅GeH₃ gives linear insoluble polymer (C₆F₄GeH₂) _n .Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 191–193, January, 1996.     

Kumada-Corriu coupling of Grignard reagents,probed with a chiral Grignard reagent

The Grignard reagent 2, in which the magnesium-bearing carbon atom is the sole stereogenic centre has been coupled with vinyl bromide under Pd(0) or Ni(0)-catalysis to give compound 3 with full retention of configuration. Coupling using Fe(acac)3 or Co(acac)2 as catalyst was accompanied by considerable racemisation. These findings are discussed with respect to a dichotomy between concerted polar and stepwise SET transmetallation pathways.     

Iron-catalyzed cross-coupling of aryltrimethylammonium triflates and alkyl Grignard reagents

Fe(acac)₃ effectively catalyzes reaction of aryltrimethylammonium triflates with β-hydrogen-containing primary or secondary alkyl Grignard reagents in a mixed solvent of THF and NMP at room temperature. A series of functional groups are tolerated under the reaction conditions.     

Michael addition of Grignard reagents to tetraethyl ethenylidenebisphosphonate

Tetraethyl ethenylidenebisphosphonate can undergo facile Michael type addition reaction with simple Grignard reagents to give alkyl, arylalkyl, aryl C-substituted methylene bisphosphonates. This addition easily occurs even if funtionalised Grignard reagents are used.