Formulation design, preparation and physicochemical characterizations of solid lipid nanoparticles containing a hydrophobic drug: effects of process variables

This study aimed to prepare solid lipid nanoparticles (SLNs) of a hydrophobic drug, tretinoin, by emulsification-ultrasonication method. Solubility of tretinoin in the solid lipids was examined. Effects of process variables were investigated on particle size, polydispersity index (PI), zeta potential (ZP), drug encapsulation efficiency (EE), and drug loading (L) of the SLNs. Shape and surface morphology of the SLNs were investigated by cryogenic field emission scanning electron microscopy (cryo-FESEM). Complete encapsulation of drug in the nanoparticles was checked by cross-polarized light microscopy and differential scanning calorimetry (DSC). Crystallinity of the formulation was analyzed by DSC and powder X-ray diffraction (PXRD). In addition, drug release and stability studies were also performed. The results indicated that 10mg tretinoin was soluble in 0.45±0.07 g Precirol? ATO5 and 0.36±0.06 g Compritol? 888ATO, respectively. Process variables exhibited significant influence in producing SLNs. SLNs with <120 nm size, <0.2 PI, >I30I mV ZP, >75% EE, and ～0.8% L can be produced following the appropriate formulation conditions. Cryo-FESEM study showed spherical particles with smooth surface. Cross-polarized light microscopy study revealed that drug crystals in the external aqueous phase were absent when the SLNs were prepared at ≤0.05% drug concentration. DSC and PXRD studies indicated complete drug encapsulation within the nanoparticle matrix as amorphous form. The drug release study demonstrated sustained/prolonged drug release from the SLNs. Furthermore, tretinoin-loaded SLNs were stable for 3 months at 4°C. Hence, the developed SLNs can be used as drug carrier for sustained/prolonged drug release and/or to improve oral absorption/bioavailability.     

Development and Optimization of Ciprofloxacin HCl-Loaded Chitosan Nanoparticles Using Box–Behnken Experimental Design

Various chitosan (CS)-based nanoparticles (CS-NPs) of ciprofloxacin hydrochloride (CHCl) have been investigated for therapeutic delivery and to enhance antimicrobial efficacy. However, the Box–Behnken design (BBD)-supported statistical optimization of NPs of CHCl has not been performed in the literature. As a result, the goal of this study was to look into the key interactions and quadratic impacts of formulation variables on the performance of CHCl-CS-NPs in a systematic way. To optimize CHCl-loaded CS-NPs generated by the ionic gelation process, the response surface methodology (RSM) was used. The BBD was used with three factors on three levels and three replicas at the central point. Tripolyphosphate, CS concentrations, and ultrasonication energy were chosen as independent variables after preliminary screening. Particle size (PS), polydispersity index (PDI), zeta potential (ZP), encapsulation efficiency (EE), and in vitro release were the dependent factors (responses). Prepared NPs were found in the PS range of 198–304 nm with a ZP of 27–42 mV. EE and drug release were in the range of 23–45% and 36–61%, respectively. All of the responses were optimized at the same time using a desirability function based on Design Expert^® modeling and a desirability factor of 95%. The minimum inhibitory concentration (MIC) of the improved formula against two bacterial strains, Pseudomonas aeruginosa and Staphylococcus aureus, was determined. The MIC of the optimized NPs was found to be decreased 4-fold compared with pure CHCl. The predicted and observed values for the optimized formulation were nearly identical. The BBD aided in a better understanding of the intrinsic relationship between formulation variables and responses, as well as the optimization of CHCl-loaded CS-NPs in a time- and labor-efficient manner.     

Design and In Vitro Evaluation of Solid-Lipid Nanoparticle Drug Delivery for Aceclofenac

Solid-lipid nanoparticles (SLNs) are an interesting nanoparticulate delivery system. The present work was carried out with the aim to develop a prolonged release solid-lipid nanoparticulate system for the drug using aceclofenac. Aceclofenac-loaded solid-lipid nanoparticles (ACSLNs) was prepared by hot high pressure homogenization technique. Tripalmitin was used as the lipid core. Surfactants (Poloxamer 188, Tween 80, and soya lecithin) and co-surfactant (sodium tauro glycholate) were used in the formulations. The prepared ACSLN formulations were characterized for encapsulation efficiency (EE), photon correlation spectroscopy (PCS), scanning electron microscopy (SEM), and x-ray diffraction (XRD). From these studies, mean particle diameter of the formulation prepared with combination of surfactants (Poloxmer 188 and Tween 80) was about 200 nm with spherical morphology and amorphous nature. Higher EE was obtained with SLNs prepared using combination of soya lecithin and poloxmer 188. The organization and distribution of the ingredients in the nanoparticulate system were studied by differential scanning calorimetry (DSC) and the results showed that the drug is incorporated into the solid matrix. The prepared formulations demonstrated favorable in vitro prolonged release characteristics. Experimental in vitro release data were substituted in available mathematical models to establish the release kinetics of ACSLNs and it was found to follow first-order kinetics and Higuchi diffusion mechanism. Our results suggest that these SLN formulations could constitute a promising approach for the drug delivery of aceclofenac.     

Effect of a phosphorus-containing flame retardant on the thermal properties and ease of ignition of poly(lactic acid)

An aryl polyphenylphosphonate, poly(9-oxa-10-(2,5-dihydro-xyphenyl) phospha-phenanthrene-10-oxide) phenylphosphonate (WLA-3), was used to prepare a flame-retardant poly(lactic acid) (PLA) by direct melt compounding. The thermal behaviour, burning behaviour and mechanical properties of the flame-retardant PLA systems have been investigated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), vertical burning test (UL-94), limiting oxygen index (LOI), cone calorimeter test (CCT) and tensile test. The flame retardance mechanism has been studied via Fourier transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), and P content analysis. The UL-94 ratings of PLA’s containing 7phr (W_7P) and 10phr (W_10P) of WLA-3 were enhanced to V-0 from no rating for neat PLA. However, the cone calorimetry of flame-retardant PLA (W_7P) only showed a little decrease in heat release rate (HRR), peak of heat release rate (PHRR) and total heat release (THR) compared to neat PLA. TGA results showed that the PLA containing different amounts of WLA-3 presented more complicated thermal decomposition behaviours than neat PLA. Additionally, the results from DSC and tensile tests showed that the addition of WLA-3 into PLA had a slight impact on the crystallization behaviours and tensile properties.     

Fabrication and Evaluation of Voriconazole Loaded Transethosomal Gel for Enhanced Antifungal and Antileishmanial Activity

Voriconazole (VRC) is a broad-spectrum antifungal agent belonging to BCS class II (biopharmaceutical classification system). Despite many efforts to enhance its solubility, this primary issue still remains challenging for formulation scientists. Transethosomes (TELs) are one of the potential innovative nano-carriers for improving the solubility and permeation of poorly soluble and permeable drugs. We herein report voriconazole-loaded transethosomes (VRCT) fabricated by the cold method and followed by their incorporation into carbopol 940 as a gel. The prepared VRCT were evaluated for % yield, % entrapment efficiency (EE), surface morphology, possible chemical interaction, particle size, zeta potential, and polydispersity index (PDI). The optimized formulation had a particle size of 228.2 nm, a zeta potential of −26.5 mV, and a PDI of 0.45 with enhanced % EE. Rheology, spreadability, extrudability, in vitro release, skin permeation, molecular docking, antifungal, and antileishmanial activity were also assessed for VRCT and VRC loaded transethosomal gel (VTEG). Ex-vivo permeation using rat skin depicted a transdermal flux of 22.8 µg/cm²/h with enhanced efficiency up to 4-fold. A two-fold reduction in inhibitory as well as fungicidal concentration was observed against various fungal strains by VRCT and VTEG besides similar results against L-donovani. The development of transethosomal formulation can serve as an efficient drug delivery system through a topical route with enhanced efficacy and better patient compliance.     

Formulation of a Poorly Water-Soluble Drug Sirolimus in Solid Dispersions to Improve Dissolution

An attempt has been made to enhance solubility and dissolution of sirolimus by solid dispersion and complexation technique using various hydrophilic excipients. Sirolimus an immunosuppressant agent has low bioavailability due to its low aqueous solubility. Solid dispersion of sirolimus in PEG-6000, Poloxamer-188, and Mannitol were prepared by fusion and solvent evaporation method. Beta-CD complexation of sirolimus was prepared by kneading method. In vitro dissolution studies were carried out in 0.4% SLS in water, which showed that the solid dispersion containing PEG 6000 (1:1), which was prepared by solvent evaporation method, showed faster dissolution rate than the other formulations and β-cyclodextrin complex. Solid dispersions containing PEG 6000 was further investigated by x-ray powder diffraction, differential scanning calorimetry (DSC), and FTIR. X-ray powder diffraction and DSC patterns suggested that the drug state changed from crystalline to amorphous form in the formulation.     

Development,In-Vitro Characterization and Preclinical Evaluation of Esomeprazole-Encapsulated Proniosomal Formulation for the Enhancement of Anti-Ulcer Activity

Objective: The present study aimed to develop and optimize esomeprazole loaded proniosomes (EZL-PNs) to improve bioavailability and therapeutic efficacy. Method: EZL-PNs formulation was developed by slurry method and optimized by 33 box-Bhekhen statistical design software. Span 60 (surfactant), cholesterol, EZL concentration were taken as independent variables and their effects were evaluated on vesicle size (nm), entrapment efficiency (%, EE) and drug release (%, DR). Furthermore, optimized EZL-PNs (EZL-PNs-opt) formulation was evaluated for ex vivo permeation, pharmacokinetic and ulcer protection activity. Result: The EZL-PNs-opt formulation showed 616 ± 13.21 nm of vesicle size, and 81.21 ± 2.35% of EE. EZL-PNs-opt exhibited negative zeta potential and spherical confirmed scanning electron microscopy. EZL-PNs-opt showed sustained release of EZL (95.07 ± 2.10% in 12 h) than pure EZL dispersion. The ex-vivo gut permeation result exhibited a significantly (p < 0.05) enhanced flux than pure EZL. The in vivo results revealed 4.02-fold enhancement in bioavailability and 61.65% protection in ulcer than pure EZL dispersion (43.82%). Conclusion: Our findings revealed that EZL-PNs formulation could be an alternative delivery system of EZL to enhance oral bioavailability and antiulcer activity.     

Core-shell lipid-polymer nanoparticles as a promising ocular drug delivery system to treat glaucoma

Nowadays,tremendous researches have been focused on the core-shell lipid-polymer nanoparticles(LPNs) due to the advantages of both liposomes and polymer nanoparticles.In this work,LPNs were applied to encapsulate brinzolamide(Brz-LPNs) for achieving sustained drug release,improving drug corneal permeation and enhancing drug topical therapeutic effect.The structure of Brz-LPNs was composed of poly(lactic-co-glycolic) acid(PLGA) nanocore which encapsulated Brz(Brz-NPs) and lipid shell around the core.Brz-LPNs were prepared by a modified thin-film dispersion method.With the parameters optimization of Brz-LPNs,optimal Brz-LPNs showed an average particle size of151.23±1.64 nm with a high encapsulation efficiency(EE) of 86.7%±2.28%.The core-shell structure of Brz-LPNs were confirmed by transmission electronic microscopy(TEM).Fourier transformed infrared spectra(FTIR) analysis proved that Brz was successfully entrapped into Brz-LPNs.Brz-LPNs exhibited obvious sustained release of Brz,compared with AZOPT^■ and Brz-LPs.Furthermore,the corneal accumulative permeability of Brz-LPNs significantly increased compared to the commercial available formulation(AZOPT^■) in vitro.Moreover,Brz-LPNs(1 mg/mL Brz) showed a more sustained and effective intraocular pressure(IOP) reduction than Brz-LPs(1 mg/mL) and AZOPT^■(10 mg/mL Brz) in vivo.In conclusion,Brz-LPNs,as promising ocular drug delivery systems,are well worth developing in the future for glaucoma treatment.     

无水AlCl_3催化PVC/PS反应性增容的研究

以无水AlCl3为催化剂,通过聚氯乙烯(PVC)与聚苯乙烯(PS)之间Friedel-Crafts反应,实现了PVC/PS共混体系的反应性增容,使PVC与PS熔融共混温度由160℃降为140℃;通过预碾磨和加入苯乙烯(St)的方法,提高材料韧性,制备了综合力学性能良好的PVC/PS合金材料.应用FTIR、DSC、SEM和力学性能测试等手段表征了合金材料的结构与性能.结果表明,FTIR出现了1943和838 cm-12个苯环对位被取代的特征吸收峰;DSC在89℃出现了玻璃化转变;SEM证明PVC/PS两相界面粘接性随AlCl3、St的加入越来越好.在PS、AlCl3和St的质量分数分别为6%,0.6%和9%时,实现了对PVC的增强增韧.合金拉伸强度达到60.54MPa,比PVC的49.35 MPa提高了22.7%;缺口冲击强度达到5.3 kJ/m2,比PVC的3.9 kJ/m2提高了35.9%.     

Loading of praziquantel in the crystal lattice of solid lipid nanoparticles

Praziquantel (PZQ) is the drug of choice for oral treatment of schistosomiasis and other fluke infections that affect humans. Its low oral bioavailability demands the development of innovative strategies to overcome the first pass metabolism. In this article, solid lipid nanoparticles loaded with PZQ (PZQ-SLN) were prepared by a modified oil-in-water microemulsion method selecting stearic acid as lipid phase after solubility screening studies. The mean particle size (Z-Ave) and zeta potential (ZP) were 500 nm and −34.0 mV, respectively. Morphology and shape of PZQ-SLN were analysed by scanning electron microscopy revealing the presence of spherical particles with smooth surface. Differential scanning calorimetry suggested that SLN comprised a less ordered arrangement of crystals and the drug was molecularly dispersed in the lipid matrix. No supercooled melts were detected. The entrapment efficiency (EE) and loading capacity of PZQ, determined by high performance liquid chromatography, were 99.06 ± 0.3 and 17.48 ± 0.05, respectively. Effective incorporation of PZQ into the particles was confirmed by small angle X-ray scattering revealing the presence of a lipid lamellar structure. Stability parameters of PZQ-SLN stored at room temperature (25 °C) and at 4 °C were checked by analysing Z-Ave, ZP and the EE for a period of 60 days. Results showed a relatively long-term physical stability after storage at 4 °C, without drug expulsion.     

球形聚丙烯粒子固相接枝苯乙烯的研究

用负载型高效球形催化剂催化丙烯本体聚合获得了孔隙率较高的球形聚丙烯 (PP)粒子 .研究了苯乙烯在这种球形多孔PP粒子中的接枝聚合反应 ,考察了各种聚合条件对接枝率及接枝效率的影响 ,并用FTIR、DSC、GPC、粘度测定及偏光显微镜 (PLM)等方法表征了接枝聚合产物的结构和形态 .研究表明 ,球形PP粒子固相接枝苯乙烯不仅可达较高接枝率 (最高达 2 4 % )和接枝效率 (最高达 5 6 7% ) ,PS相区尺寸小、分布均匀 ,而且产物为形态规则的球形颗粒 ,有利于防止聚合物结块和粘壁 .但PP接枝PS后分子量有所下降 ,表明PP接枝PS的同时伴随着轻微的降解     

Paclitaxel loaded poly (DL lactic acid co castor oil) 60:40 with poloxamer‐F68 rod shape cylindrical nanoparticle preparation and in vitro cytotoxicity studies

This research presents a thin‐film hydration‐solvent evaporation method to formulate the paclitaxel loaded poly (DL lactic acid co castor oil) 4:6 with poloxamer‐F68 cylindrical shape nanoparticles. The particles were less than 250 nanometers (nm) in size, with an average width of 60 nm and an average length of 100 nm. The percent yield, encapsulation efficiency (EE), and percent drug loading (DL) were detected. This approach produces drug loading values between 5% and 20% w/w. X‐ray powder diffraction (XRD) identified the physicochemical properties of nanoparticles differential scanning calorimetry (DSC) and Fourier‐transform infrared spectroscopy (FTIR). The investigation shows that the drug is molecularly dispersed in polymers or given in an amorphous or semicrystalline state. Horizontal water bath shaker technology considered the in vitro release of PTX loaded nanoparticles under sink conditions. Poly (DL lactic acid co castor oil) 4:6 nanoparticles exhibited a sustained release analysis. At the end of 30 hours, the percent cumulative drug release from the formulations was between 74.52% and 92.87% for F1 and F4. In vitro cytotoxicity assays indicate that PTX having p (DLLA:CO60:40) nanoparticles have a higher cytotoxic effect on MCF‐7/ADR.     

Development of temperature-responsive semi-IPN hydrogels from PVA-PNVC-PAm for controlled release of anti-cancer agent

A series of semi-interpenetrating polymeric network (semi-IPN) hydrogels were synthesized using poly(vinyl alcohol) (PVA), monomers N-vinylcaprolactam (NVC) acrylamide (Am), and cross-linker bis[2-methacryloyloxy] ethyl phosphate (BMEP). The hydrogels were synthesized by using free-radical polymerization using ammonium persulphate (APS) as an initiator at 60°C. The hydrogels were characterized by various techniques such as Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM) to confirm the formation, crystallinity, and morphological behavior. The swelling behavior at various temperatures and pH conditions showed that the semi-IPN hydrogels were good candidates for temperature-responsive nature. 5-Flurouracil (FU), a model anticancer drug, was successfully encapsulated and the encapsulation efficiency was found in range of 50–74% for different hydrogels. Further, in-vitro release studies were performed to investigate the release mechanism. The cumulative release studies showed that the developed hydrogels are potentially efficient for the gastrointestinal drug delivery of FU.     

Investigation of inclusion complexes of citronella oil, citronellal and citronellol with β-cyclodextrin for mosquito repellent

The aim of this study was to prepare the inclusion complexes of citronella oil, citronellal or citronellol with β-cyclodextrin and evaluate their physicochemical properties using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). A kneading method was employed to prepare the inclusion complexes and weight ratios of each of the active substance to β-cyclodextrin were 1:1 (1:1 CPX) and 1:2 (1:2 CPX). For comparison purposes, physical mixtures of these active compounds and β-cyclodextrin were also prepared and investigated. Unlike the physical mixtures, the SEM technique revealed drastic changes in the shapes and morphologies of the particles for the inclusion complexes. Furthermore, the FTIR and DSC results seemed to reveal some interactions between the active substance and β-cyclodextrin. The o/w lotions, which contained 10% w/w citronella oil (normal citronella oil; 1:1 CPX or 1:2 CPX), were formulated using Cremophors as emulsifiers. With modified Franz diffusion cell and synthetic membrane, the release rates of citronella oil from the lotions containing the inclusion complexes were significantly lower than that from the prepared lotion containing normal citronella oil. The mosquito (Aedes aegypti) repellent efficacy of the lotions containing citronella oil, citronellal or citronellol (both normal and inclusion complexes) was further evaluated by human-bait technique. The highest mosquito repellent activity was observed in the formulation which contained citronella oil–β-cyclodextrin inclusion complex at weight ratio of 1:1.     

A polymeric composite carrier for oral delivery of peptide drugs: Bilaminated hydrogel film loaded with nanoparticles

A smart polymeric composite carrier consisting of carboxylated chitosan grafted nanoparticles (CCGN) and bilaminated films with one alginate-Ca²⁺ mucoadhesive layer and one hydrophobic backing layer was developed as a novel carrier for peptide. Calcein, hydrophilic and hydrolytic degradative, was entrapped into CCGN as a model peptide and its release behavior was investigated. Morphology study showed a uniform distribution of CCGN in the homogeneous and porous hydrogel. CCGN was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), particle size measurement, and ζ potential measurement. The composite carrier was characterized by differential scanning calorimetry (DSC), scanning electron microscope (SEM) and fluorescence microscopy. The carrier exhibited high mucoadhesive force and pH-sensitivity, in that release of the nanoparticles and the model peptide calcein were both restricted in acidic environment while a fast and complete release was achieved in neutral medium. Therefore, this novel carrier would be a promising candidate for hydrophilic peptide drugs via oral administration.     

Novel synthesis of nano‐calcium carbonate (CaCO3)/polystyrene (PS) core–shell nanoparticles by atomized microemulsion technique and its effect on properties of polypropylene (PP) composites

Calcium carbonate (CaCO₃)/polystyrene (PS) nanoparticles (<100 nm) with core–shell structure were synthesized by atomized microemulsion technique. The polymer chains were anchored onto the surface of nano‐CaCO₃ through triethoxyvinyl silane (TEVS) as a coupling agent. Ammonium persulfate (APS), sodium dodecyl sulfate (SDS) and n‐pentanol were used as initiator, surfactant, and cosurfactant, respectively. Polymerization mechanism of core–shell latex particles was discussed. Encapsulation of nano‐CaCO₃ by PS was confirmed by using transmission electron microscope (TEM). Grafting percentage of core–shell particles was investigated by Thermogravimetric Analyzer (TGA). Nano‐CaCO₃/PS core–shell particles were characterized by Fourier transform infrared (FTIR) spectrophotometer and differential scanning calorimeter (DSC). The results of FTIR revealed existence of a strong interaction at the interface of nano‐CaCO₃ particle and PS, which implies that the polymer chains were successfully grafted onto the surface of nano‐CaCO₃ particle through the link of the coupling agent. In addition, TGA and DSC results indicated an enhancement of thermal stability of core–shell materials compared with the pure nano‐PS. Nano‐CaCO₃/PS particles were blended with polypropylene (PP) matrix on Brabender Plastograph by melt process with different wt% of loading (i.e. 0.1–1 wt%). The interfacial adhesion between nano‐CaCO₃ particles and PP matrix was significantly improved when the nano‐CaCO3 particles were grafted with PS, which led to increased thermal, rheological, and mechanical properties of (nano‐CaCO₃/PS)/PP composites. Scanning electron microscope (SEM) and atomic force microscope (AFM) images showed a perfect dispersion of the nano‐CaCO₃ particles in PP matrix. Copyright © 2011 John Wiley & Sons, Ltd.     

The enhancement on thermal stability and charring–forming capability of nitration group

Lipid nanoparticles, both solid lipid nanoparticles and nanostructured lipid carriers (NLC), containing tacrolimus (FK) were obtained by solvent diffusion method associated with ultrasonication using stearic acid (SA) or beeswax as solid lipid. The oleic acid was used as liquid lipid in the NLC. Lipid nanoparticles were characterized by determining the drug loading, particle size, polydispersity index (PDI) and zeta potential (ZP). Analysis by differential scanning calorimetry and X-ray diffraction were performed. Lipid nanoparticles presented nano-sized from 139 to 275 nm. The PDI results show the particles present from 0.3 to 0.5, and ZP was higher than |25| mV. Drug loading ranged of 2.3–3.2%. SA nanoparticles presented better ZP, average size and distribution. However, beeswax nanoparticles showed higher drug loading. Results suggest there are no incompatibilities between FK and the raw materials. Polymorphic modifications were not observed. The results presented show that lipid nanoparticles using both lipids were successfully obtained and may represent promising delivery system of FK in topical formulations.     

A facile strategy to modify TiO2 nanoparticles via surface‐initiated ATRP of styrene

A core‐shell hybrid nanocomposites, possessing a hard core of nano titanium dioxide (n‐TiO₂) and a soft shell of brushlike polystyrene (PS), were successfully prepared by surface‐initiated atom transfer radical polymerization (ATRP) at 90 °C in anisole solution using CuBr/PMDETA as the catalyst, in the presence of sacrificial initiator. FTIR, ¹H NMR, XPS, TEM, SEM, TGA, and DSC were used to determine the chemical structure, morphology, thermal properties, and the grafted PS quantities of the resulting products. TEM images of the samples provided direct evidence for the formation of a core‐shell structure. The thermal stabilities of the grafted polymers were dramatically elevated relative to that of pristine PS according to TGA results. DSC results demonstrated that the TiO₂‐PS nanocomposites exhibited higher glass transition temperature (T_g) compared with pristine PS. The molecular weights of the free polymers formed by sacrificial initiator, which were similar to that of surface‐attached polymers were measured by GPC instrument which showed that the molecular weights of PS were well controlled with a relatively narrow polydispersity index (PDI < 1.2). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1782–1790, 2010     

A flame-retardant epoxy resin based on a reactive phosphorus-containing monomer of DODPP and its thermal and flame-retardant properties

A flame-retardant epoxy resin (EP) was synthesized based on a novel reactive phosphorus-containing monomer, 4-[(5,5-dimethyl-2-oxide-1,3,2-dioxaphosphorinan-4-yl)oxy]-phenol (DODPP), and its structures were characterized by FTIR, ¹H NMR and ³¹P NMR spectra. The DODPP-EP₃/LWPA (low molecular weight polyamide), which contains 2.5% phosphorus, can reach UL-94 V-0 rating and a limiting oxygen index (LOI) value of 30.2%. The thermal properties and burning behaviours of cured epoxy resins were investigated by differential scanning calorimeter (DSC), thermogravimetry (TG), LOI, UL-94 tests and cone calorimetry. The morphologies of residues of cured epoxy resins were investigated by scanning electron microscopy (SEM). DSC shows that the glass-transition temperatures of cured epoxy resins decrease with increasing phosphorus content. TGA shows that the onset decomposition temperatures and the maximum-rate decomposition temperatures decrease, while char yields increase, with the increase of phosphorus content. The data from the cone calorimeter tests give the evidence that heat release rate (HRR), peak heat release rate (PHRR), average heat release rate (Av-HRR), average mass loss rate (Av-MLR) and the fire growth rate index (FIGRA) decrease significantly for DODPP-EP₃/LWPA. SEM shows that the DODPP-EP₃/LWPA forms lacunaris and compact charred layers which inhibit the transmission of heat during combustion.     

Preparation and characterization of a novel pH-sensitive ion exchange resin

Methylacrylic acid/styrene cross-linked with divinylbenzene is a novel pH-sensitive ion exchange resin. Microspheres of this resin were characterized by Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The microspheres showed a pulsatile swelling behavior when the pH of the media changed. The pH-sensitive microspheres were loaded with salbutamol sulfate and the drug-release characteristics were studied under both simulated gastric and intestinal pH conditions. The results obtained showed that the drug release also depended on the pH of the release media.