Photocatalytic Oxidation of Aromatic Hydrocarbons

In acidic aqueous solutions UO(2)(2+) serves as a photocatalyst (lambda(irr) >/= 425 nm) for the oxidation of benzene by H(2)O(2). Under conditions where 50% of the excited state UO(2)(2+) is quenched by H(2)O(2) (k = 5.4 x 10(6) M(-)(1) s(-)(1)) and 50% by benzene (k = 2.9 x 10(8) M(-)(1) s(-)(1)), the quantum yield for the formation of phenol is 0.70. The yield does not change when benzene is replaced by benzene-d(6), but decreases by a factor of approximately 4 upon the change of solvent from H(2)O to D(2)O. Photocatalytic oxidation of toluene by UO(2)(2+)/H(2)O(2) produces PhCHO, PhCH(2)OH, and a mixture of cresols with a total quantum yield of 0.28 under conditions where 50% of UO(2)(2+) is quenched by H(2)O(2). The quenching of UO(2)(2+) by benzene and substituted benzenes takes place with k > 10(8) M(-)(1) s(-)(1). The system UO(2)(2+)/t-BuOOH/C(6)H(6)/hnu does not result in the oxidation of benzene, but instead yields methane and ethane.     

Acidities of platinum(II) mu-hydroxo complexes bearing diphosphine ligands

The pK(a) values in DMSO of the monoprotic complexes [(L(2)Pt)(2)(mu-OH)(mu-NMePh)](2+) (4) (L(2) = Ph(2)PCH(2)CH(2)PPh(2) (dppe), Ph(2)PCMe(2)PPh(2) (dppip)) are 11.9 +/- 0.1 (L(2) = dppe) and 13.5 +/- 0.2 (L(2) = dppip) as determined by (31)P NMR equilibrium titration with bases of known pK(a). Complexes 4 were prepared by treatment of [L(2)Pt(mu-OH)](2)(2+) (1) with N-methylaniline. The oxo complexes [(L(2)Pt)(2)(mu-O)(mu-NMePh)](+), formed in the equilibrium titration reactions, were independently synthesized in THF by deprotonation of [(L(2)Pt)(2)(mu-OH)(mu-NMePh)](2+) with NaN(SiMe(3))(2) and characterized as NaBF(4) adducts. Similar experiments with diprotic [L(2)Pt(mu-OH)](2)(2+) (L(2) = dppe, Ph(2)PCH(2)CH(2)CH(2)PPh(2) (dppp)) were complicated by exchange processes and were less conclusive, giving pK(a1) < 18 and pK(a2) > 18 in DMSO.     

Hypervalent organobismuth(iii) carbonate, chalcogenides and halides with the pendant arm ligands 2-(Me2NCH2)C6H4 and 2,6-(Me2NCH2)2C6H3

R2BiOH (1) [R = 2-(Me2NCH2)C6H4] and (R2Bi)2O (2) are formed by hydrolysis of R2BiCl with KOH. Single crystals of were obtained by air oxidation of (R2Bi)2. The reaction of R2BiCl and Na2CO3 leads to (R2Bi)2CO3 (3). 3 is also formed by the absorption of CO2 from the air in solutions of 1 or 2 in diethyl ether or toluene. (R2Bi)2S (4) is obtained from R2BiCl and Na2S or from (R2Bi)2 and S8. Exchange reactions between R2BiCl and KBr or NaI give R2BiX [X = Br (5), I (6)]. The reaction of RBiCl2 (7) with Na2S and [W(CO)5(THF)] gives cyclo-(RBiS)2[W(CO)5]2 (8). cyclo-(R'BiS)2 (9) [R' = 2,6-(Me2NCH2)2C6H3] is formed by reaction of R'BiCl2 and Na2S. The structures of were determined by single-crystal X-ray diffraction.     

Synthesis, structural characterization, antimicrobial and cytotoxic effects of aziridine, 2-aminoethylaziridine and azirine complexes of copper(II) and palladium(II)

The synthesis, spectroscopic and X-ray structural characterization of copper(II) and palladium(II) complexes with aziridine ligands as 2-dimethylaziridine HNCH(2)CMe(2) (a), the bidentate N-(2-aminoethyl)aziridines C(2)H(4)NC(2)H(4)NH(2) (b) or CH(2)CMe(2)NCH(2)CMe(2)NH(2) (c) as well as the unsaturated azirine NCH(2)CPh (d) are reported. Cleavage of the cyclometallated Pd(II) dimer [μ-Cl(C(6)H(4)CHMeNMe(2)-C,N)Pd](2) with ligand a yielded compound [Cl(NHCH(2)CMe(2))(C(6)H(4)CHMe(2)NMe(2)-C,N)Pd] (1a). The reaction of the aziridine complex trans-[Cl(2)Pd(HNC(2)H(4))(2)] with an excess of aziridine in the presence of AgOTf gave the ionic chelate complex trans-[(C(2)H(4)NC(2)H(4)NH(2)-N,N')(2)Pd](OTf)(2) (2b) which contains the new ligand b formed by an unexpected insertion and ring opening reaction of two aziridines ("aziridine dimerization"). CuCl(2) reacted in pure HNC(2)H(4) or HNCH(2)CMe(2) (b) again by "dimerization" to give the tris-chelated ionic complex [Cu(C(2)H(4)NC(2)H(4)NH(2)-N,N')(3)]Cl(2) (3b) or the bis-chelated complex [CuCl(C(2)H(2)Me(2)NC(2)H(2)Me(2)NH(2)-N,N')(2)]Cl (4c). By addition of 2H-3-phenylazirine (d) to PdCl(2), trans-[Cl(2)Pd(NCH(2)CPh)(2)] (5d) was formed. All new compounds were characterized by NMR, IR and mass spectra and also by X-ray structure analyses (except 3b). Additionally the cytotoxic effects of these complexes were examined on HL-60 and NALM-6 human leukemia cells and melanoma WM-115 cells. The antimicrobial activity was also determined. The growth of Gram-positive bacterial strains (S. aureus, S. epidermidis, E. faecalis) was inhibited by almost all tested complexes at the concentrations of 37.5-300.0 μg mL(-1). However, MIC values of complexes obtained for Gram-negative E. coli and P. aeruginosa, as well as for C. albicans yeast, mostly exceeded 300 μg mL(-1). The highest antibacterial activity was achieved by complexes 1a and 2b. Complex 2b also inhibited the growth of Gram-negative bacteria.     

Cyclic and linear polyferrocenes with silicon and tin as alternating bridges

The synthesis and characterization of ferrocene-based oligomers that contained two different elements (Si and Sn) as alternating bridges is described for the first time. The salt-metathesis reaction of R(2) Si[(C(5) H(4) )Fe(C(5) H(4) Li)](2) (R=Me, Et) with R'(2) SnCl(2) (R'=Me, nBu, tBu) afforded a mixture of oligomers (6(Me) SnMe(2), 6(Et) SnMe(2), 6(Me) SnnBu(2), 6(Et) SnnBu(2), 6(Me) SntBu(2), and 6(Et) SntBu(2)). These oligomers were characterized by (1) H, (13) C, (29) Si, and (119) Sn?NMR spectroscopy and by mass spectrometry. MS (MALDI-TOF) studies of 6(Et) SnMe(2) revealed the presence of linear (l) and cyclic (c) species that contained up to 20?ferrocene moieties. The molecular weights of the polymers were determined by gel-permeation chromatography (GPC) and by dynamic-light scattering (DLS). GPC analysis revealed average molecular weights of 2100-6300?Da with respect to polystyrene as a standard. DLS analysis yielded very similar results. Some compounds, c-(6(Me) SnMe(2) )(1), c-(6(Me) SntBu(2))(2), c-(6(Et) SnMe(2))(1), c-(6(Et) SntBu(2))(2), l-(6(Me) SnnBu(2) )(2), and l-(6(Me) SnnBu(2))(3), which contained up to six ferrocene moieties, were isolated in their pure form either by column chromatography or by crystallization. The Si- and Sn-bridged macrocycles that contained four ferrocene units (c-(6(Me) SntBu(2))(2) and c-(6(Et) SntBu(2))(2)) were structurally characterized by single-crystal X-ray analysis.     

Syntheses and reactivity of the diselenido molybdenum-manganese complex CpMoMn(CO)5(mu-Se2)

Reaction of CpMoMn(CO)(8) with elemental selenium and Me(3)NO in the absence of light yielded the diselenido complex CpMoMn(CO)(5)(mu-Se(2)), 2. Compound 2 contains a bridging diselenido ligand lying perpendicular to the Mo-Mn bond, Mo-Mn = 2.8421(10) A. In the presence of room light, the reaction yielded the tetranuclear metal complex Cp(2)Mo(2)Mn(2)(CO)(7)(mu(3)-Se)(4), 3 (36% yield), and 2 (7% yield). Compound 2 reacted with ethylene to yield the ethanediselenato complex CpMoMn(CO)(5)(mu-SeCH(2)CH(2)Se), 4, by insertion of ethylene into the Se-Se bond. Compound 2 also reacted with (PPh(3))(2)Pt(PhC(2)Ph) and CpCo(CO)(2) to yield the complexes CpMoMnPt(PPh(3))(2)(CO)(5)(mu(3)-Se)(2), 5, and Cp(2)CoMoMn(CO)(5)(mu(3)-Se)(2), 6, respectively, by insertion of the metal groupings CpCo and Pt(PPh(3))(2) into the Se-Se bond of 2. The oxo compound Cp(2)CoMo(O)Mn(CO)(5)(mu(3)-Se)(2), 7, was obtained from 6 by decarbonylation at molybdenum by using Me(3)NO. The molecular structures of the complexes 2-7 were established by single-crystal X-ray diffraction analyses.     

Synthesis and structural characterization of novel Re(i) tricarbonyl complexes anchored on a phosphinoarylbenzylamine and a phosphinoaryloxazoline generated in situ

Reduction of the amide or replacement of the hydroxyl by a bromide in 2-(diphenylphosphanyl)-N-(2-hydroxyethyl)benzamide (H2PNO) yielded the compounds 2-(diphenylphosphanyl)-N-(2-hydroxyethyl)benzylamine (H2CH2PNO, 1) and N-(2-bromoethyl)-2-(diphenylphosphanyl)benzamide (HPNBr, 2), respectively. Compound 2 is obtained in low yield and, depending on the reaction conditions, is mixed with starting material or with a product which has been identified as 2-(2-diphenylphosphinophenyl)oxazoline (PPh3oxaz, 3). Compounds 1 and 2 react with (NEt(4))(2)[ReBr(3)(CO)(3)], leading to the complexes [Re(CO)(3)(kappa(2)-H(2)CH(2)PNO)Br] (4) and [Re(CO)(3)(kappa(2)-PPh(3)oxazBr)] (5), fully characterized by (1)H and (31)P NMR spectroscopy and X-ray crystallographic analysis. Complex 5 is the first example of a Re(I) tricarbonyl anchored on a phosphorus-oxazoline ligand, which has been generated during the course of complex formation. In the unexpected and unusual complex 5, the Re atom is stabilized by a bidentate 2-(2-diphenylphosphinophenyl)oxazoline, by a bromide, and by three facially arranged carbonyl groups. In complex 4, the carbonyl groups are also facially coordinated to the metal center and the other three remaining coordination positions are occupied by a bromide and by the bidentate (P, N) ligand 2-(diphenylphosphanyl)-N-(2-hydroxyethyl)benzylamine.     

Dioxomolybdenum(VI) Complexes with New Enantiomerically Pure Amino Diol Ligands

(R)-Phenylglycinol is shown to be an efficient building block for the synthesis of chiral amino diols in pure diastereomeric form by epoxide ring-opening reactions. The reaction with rac-trans-stilbene oxide gives [HOCH(2)-(R)-PhCH]NH[(S)-PhCH-(R)-PhCHOH] [2(R)-3(R)-4(S)-HNO(2)H(2)] in 32% yield, which can be methylated at nitrogen to give enantiomerically pure [HOCH(2)-(R)-PhCH]NCH(3)[(S)-PhCH-(R)-PhCHOH] [2(R)-3(R)-4(S)-MeNO(2)H(2)]. These amino diol ligands have been used to prepare chiral dioxomolybdenyl complexes of the formula N(R)-2(R)-3(R)-4(S)-(HNO(2))MoO(2) (1) and N(R)-2(R)-3(R)-4(S)-(MeNO(2))MoO(2) (2). The absolute configuration at each stereocenter in the Mo(VI) complexes has been established by (1)H NOESY spectroscopy. The configuration determined for 1 has been confirmed by an X-ray analysis. Crystal data: orthorhombic P2(1)2(1)2(1), a =7.620(3), b = 13.589(2), c = 20.339(3) ?, Z = 4, R = 0.0336. The structure consists of a polymeric chain of N(R)-2(R)-3(R)-4(S)-(HNO(2))MoO(2) molecules connected through unsymmetrical Mo=O --> Mo bridges. Each metal center is coordinated in a distorted octahedral geometry by a cis dioxo unit and by two trans alkoxo atoms. The coordination polyhedron is completed by a nitrogen atom and by a bridging oxo oxygen atom from an adjacent molecule. Compound 2 catalyzes the oxidation of PPh(3) to OPPh(3) by DMSO through a mechanism that involves the intermediacy of a Mo(IV) species.     

New organically templated copper(I) sulfites: the role of sulfite anion as both soft and hard ligand

Two new organically templated layered copper(I) sulfites, namely, {H2pip}{Cu3(CN)3(SO3)} (1) and {H2pip}{NaCu2(SO3)2Br(H2O)}.2H2O (2) (pip = piperazine), have been synthesized by hydrothermal reactions of copper(I) cyanide or copper(I) bromide with NaHSO3 and piperazine. Both compounds exhibit a layered structure. The 2D layer of {Cu3(CN)3(SO3)}2- in 1 is composed of 1D chains of copper(I) cyanide interconnected by sulfite anions via both Cu-S and Cu-O bonds, whereas the 2D layer of {NaCu2(SO3)2Br}2- in 2 is formed by 1D chains of copper(I) bromide and 1D sodium(I) aqua chains that are interconnected by sulfite anions via Na-O, Cu-S, and Cu-O bonds. Chemical bonding in 1 and 2 has been also investigated by theoretical calculations based on DFT methods.     

Film growth precursor development for metal nitrides. Synthesis, structure, and volatility of molybdenum(VI) and tungsten(VI) complexes containing bis(imido)metal fragments and various nitrogen donor ligands

The molybdenum and tungsten complexes W2(NtBu)4(pz)4(pzH).(C6H14)0.5 (pz = pyrazolate), M(NtBu)2(Me2pz)2(Me2pzH)2 (Me2pz = 3,5-dimethylpyrazolate), M(NtBu)2(tBu2pz)2 (tBu2pz = 3,5-di-tert-butylpyrazolate), M2(NtBu)4(Me2pz)2Cl2, W(NtBu)2(C2N3(iPr)2)2py2, M(NtBu)2-(CN4CF3)2py2, and W(NtBu)2(PhNNNPh)2 were prepared by various synthetic routes from the starting materials Mo(NtBu)2Cl2, W(NtBu)2(NHtBu)2, and W(NtBu)2Cl2py2. These new complexes were characterized by spectral and analytical methods and by X-ray crystal structure determinations. The volatilities and thermal stabilities were evaluated to determine the potential of the new complexes for use in thin film growth of metal nitride films. Mo(NtBu)2(tBu2pz)2 and W(NtBu)2(tBu2pz)2 were found to have the optimum combination of volatility and thermal stability for application in atomic layer deposition thin film growth procedures.     

Synthesis,Structure, and Electrochemical Properties of Sterically Protected Molybdenum Trihydride Redox Pairs: A Paramagnetic “Stretched” Dihydrogen Complex?

Complexes [MoCp(#)(PMe(3))(2)H(3)] (Cp(#)=1,2,4-C(5)H(2)tBu(3), 2 a; C(5)HiPr(4), 2 b) have been synthesized from the corresponding compounds [MoCp(#)Cl(4)] (1 a, 1 b) and fully characterized, including by X-ray crystallography and by a neutron diffraction study for 2 a. Protonation of 2 a led to complex [Mo(1,2,4-C(5)H(2)tBu(3))(PMe(3))(2)H(4)](+) (3 a) in THF and to [Mo(1,2,4-C(5)H(2)tBu(3))(PMe(3))(2)(MeCN)H(2)](+) (4 a) in MeCN. Complex 4 b analogously derives from protonation of 2 b in MeCN, whereas the tetrahydride complex 3 b is unstable. One-electron oxidation of 2 a and 2 b by [FeCp(2)]PF(6) produces the EPR-active 17-electron complexes 2 a(+) and 2 b(+). The former is thermally more stable than the latter and could be crystallographically characterized as the PF(6) (-) salt by X-ray diffraction, providing evidence for the presence of a stretched dihydrogen ligand (H...H=1.36(6) angstroms). Controlled thermal decomposition of 2 a(+) yielded the product of H(2) elimination, the 15-electron monohydride complex [Mo(1,2,4-C(5)H(2)tBu(3))(PMe(3))(2)H]PF(6) (5 a), which was characterized by X-ray crystallography and by EPR spectroscopy at liquid He temperature. The compound establishes an equilibrium with the solvent adduct in THF. An electrochemical study by cyclic voltammetry provides further evidence for a rapid H(2) elimination process from the 17-electron complexes. In contrast to the previously investigated [MoCp*(dppe)H(3)](+) system (dppe=1,2-bis(diphenylphosphino)ethane; Cp*=pentamethylcyclopentadienyl), the decomposition of 2 a(+) by H(2) substitution with a solvent molecule appears to follow a dissociative pathway in MeCN.     

Hydrothermal syntheses and structures of two mixed-valence copper(I,II) 2-pyrazinecarboxylate coordination polymers

Replacement of linear ligand L in Cu(I)XL system (X = halide or pseudohalide; L = 4,4'-bipyridine or pyrazine) by neutral species Cu(pzc)2(H2O)x (pzc = 2-pyrazinecarboxylate) resulted in mixed-valence Cu(I,II) coordination polymers [Cu2(pzc)2Br(H2O)]n (1) and [Cu3(pzc)2(CN)2(H2O)2 x 2H2O]n (2). Complex 1 has two-dimensional (4,4) topological layer constructed by [CuBr]n chains and Cu(pzc)2(H2O) species, while 2 has a three-dimensional framework formed by linkage of two-dimensional (6,3) layers via ligand-unsupported Cu(I)-Cu(I) interactions. The two-dimensional (6,3) layer in 2 is constructed by zigzag [CuCN]n chains and Cu(pzc)2(H2O)2 species. Cyanides in 2 were produced by oxidative desulfation of SCN- anions.     

Oxidation of Zn(Cys)4 zinc finger peptides by O2 and H2O2: products, mechanism and kinetics

The reactivity of a series of Zn(Cys)(4) zinc finger model peptides towards H(2)O(2) and O(2) has been investigated. The oxidation products were identified by HPLC and ESI-MS analysis. At pH<7.5, the zinc complexes and the free peptides are oxidised to bis-disulfide-containing peptides. Above pH 7.5, the oxidation of the zinc complexes by H(2)O(2) also yields sulfinate- and sulfonate-containing overoxidised peptides. At pH 7.0, monitoring of the reactions between the zinc complexes and H(2)O(2) by HPLC revealed the sequential formation of two disulfides. Several techniques for the determination of the rate constant for the first oxidation step corresponding to the attack of H(2)O(2) by the Zn(Cys)(4) site have been compared. This rate constant can be reliably determined by monitoring the oxidation by HPLC, fluorescence, circular dichroism or absorption spectroscopy in the presence of excess ethyleneglycol bis(2-aminoethyl ether)tetraacetic acid. In contrast, monitoring of the release of zinc with 4-(2-pyridylazo)resorcinol or of the thiol content with 5,5'-dithiobis(2-nitrobenzoate) did not yield reliable values of this rate constant for the case in which the formation of the second disulfide is slower than the formation of the first. The kinetic measurements clearly evidence a protective effect of zinc on the oxidation of the cysteines by both H(2)O(2) and O(2), which points to the fact that zinc binding diminishes the nucleophilicity of the thiolates. In addition, the reaction between the zinc finger and H(2)O(2) is too slow to consider zinc fingers as potential sensors for H(2)O(2) in cells.     

1-D cobalt(II) spin transition compound with strong interchain interaction: [Co(pyterpy)Cl(2)].X

Cobalt(II) compounds [Co(pyterpy)Cl(2)].MeOH (1.(MeOH)) and [Co(pyterpy)Cl(2)].2H(2)O (1.(2H(2)O)) were synthesized. The compound 1.(MeOH) forms the quasi 3-D networks by making pi-pi stacking between the 1-D chains. The methanol molecules from 1.(MeOH) can be removed by heating, and substituted by absorption of water molecules. The MeOH molecules in 1.(MeOH) are removed by heating at 410 K, and they are substituted by water molecules to form 1.(2H(2)O). 1.(2H(2)O) exhibits a S = (3)/(2) (HS) left arrow over right arrow S = (1)/(2) (LS) spin transition with a thermal hysteresis. We have succeeded in constructing a guest dependent 1-D spin-crossover cobalt(II) compound.     

Oxidation Kinetics of the Potent Insulin Mimetic Agent Bis(maltolato)oxovanadium(IV) (BMOV) in Water and in Methanol

The kinetics of oxidation of bis(maltolato)oxovanadium(IV), BMOV or VO(ma)(2), by dioxygen have been studied by UV-vis spectroscopy in both MeOH and H(2)O media. The VO(ma)(2):O(2) stoichiometry was 4:1. In aqueous solution, the pH-dependent rate of the VO(ma)(2)/O(2) reaction to generate cis-[VO(2)(ma)(2)](-) is attributed to the deprotonation of coordinated H(2)O, the deprotonated species [VO(ma)(2)(OH)](-) being more easily oxidized (k(OH) = 0.39 M(-)(1) s(-)(1), 25 degrees C) than the neutral form VO(ma)(2)(H(2)O) (k(H)()2(O) = 0.08 M(-)(1) s(-)(1), 25 degrees C). The activation parameters for the two second-order reactions in aqueous solution were deduced from variable temperature kinetic measurements. In MeOH, VO(ma)(2) was oxidized by dioxygen to cis-VO(OMe)(ma)(2), whose structure was characterized by single-crystal X-ray diffraction; the crystals were monoclinic, C2/c, with a = 28.103(1) ?, b = 7.721(2) ?, c = 13.443(2) ?, beta = 94.290(7) degrees, and Z = 8. The structure was solved by Patterson methods and was refined by full-matrix least-squares procedures to R = 0.043 for 1855 reflections with I >/= 3sigma(I). The kinetic results are consistent with a mechanism involving an attack of O(2) at the V(IV) center, followed by the formation of radicals and H(2)O(2) as transient intermediates.     

Heterobimetallic activation of dioxygen: characterization and reactivity of novel Cu(I)-Ge(II) complexes

Reaction of the known germylene Ge[N(SiMe3)2]2 and a new heterocyclic variant Ge[(NMes)2(CH)2] with [L(Me2)Cu]2 (L(Me2) = the beta-diketiminate derived from 2-(2,6-dimethylphenyl)amino-4-(2,6-dimethylphenyl)imino-2-pentene) yielded novel Cu(I)-Ge(II) complexes L(Me2)Cu-Ge[(NMes)2(CH)2] (1a) and L(Me2)Cu-Ge[N(SiMe3)2]2 (1b), which were characterized by spectroscopy and X-ray crystallography. The lability of the Cu(I)-Ge(II) bond in 1a and b was probed by studies of their reactivity with benzil, PPh3, and a N-heterocyclic carbene (NHC). Notably, both complexes are cleaved rapidly by PPh3 and the NHC to yield stable Cu(I) adducts (characterized by X-ray diffraction) and the free germylene. In addition, the complexes are highly reactive with O2 and exhibit chemistry which depends on the bound germylene. Thus, oxygenation of 1a results in scission and formation of thermally unstable L(Me2)CuO2, which subsequently decays to [(L(Me2)Cu)2(mu-O)2], while 1b yields L(Me2)Cu(mu-O)2Ge[N(SiMe3)2]2, a novel heterobimetallic intermediate having a [Cu(III)(mu-O)2Ge(IV)]3+ core. The isolation of the latter species by direct oxygenation of a Cu(I)-Ge(II) precursor represents a new route to heterobimetallic oxidants comprising copper.     

Unimolecular reactions in the CF3CH2Cl ↔ CF2ClCH2F system: isomerization by interchange of Cl and F atoms

The recombination of CF(2)Cl and CH(2)F radicals was used to prepare CF(2)ClCH(2)F* molecules with 93 ± 2 kcal mol(-1) of vibrational energy in a room temperature bath gas. The observed unimolecular reactions in order of relative importance were: (1) 1,2-ClH elimination to give CF(2)═CHF, (2) isomerization to CF(3)CH(2)Cl by the interchange of F and Cl atoms and (3) 1,2-FH elimination to give E- and Z-CFCl═CHF. Since the isomerization reaction is 12 kcal mol(-1) exothermic, the CF(3)CH(2)Cl* molecules have 105 kcal mol(-1) of internal energy and they can eliminate HF to give CF(2)═CHCl, decompose by rupture of the C-Cl bond, or isomerize back to CF(2)ClCH(2)F. These data, which provide experimental rate constants, are combined with previously published results for chemically activated CF(3)CH(2)Cl* formed by the recombination of CF(3) and CH(2)Cl radicals to provide a comprehensive view of the CF(3)CH(2)Cl* ? CF(2)ClCH(2)F* unimolecular reaction system. The experimental rate constants are matched to calculated statistical rate constants to assign threshold energies for the observed reactions. The models for the molecules and transition states needed for the rate constant calculations were obtained from electronic structures calculated from density functional theory. The previously proposed explanation for the formation of CF(2)═CHF in thermal and infrared multiphoton excitation studies of CF(3)CH(2)Cl, which was 2,2-HCl elimination from CF(3)CH(2)Cl followed by migration of the F atom in CF(3)CH, should be replaced by the Cl/F interchange reaction followed by a conventional 1,2-ClH elimination from CF(2)ClCH(2)F. The unimolecular reactions are augmented by free-radical chemistry initiated by reactions of Cl and F atoms in the thermal decomposition of CF(3)CH(2)Cl and CF(2)ClCH(2)F.     

Preparation, structure, and properties of tetranuclear vanadium(III) and (IV) complexes bridged by diphenyl phosphate or phosphate

Three novel tetranuclear vanadium(III) or (IV) complexes bridged by diphenyl phosphate or phosphate were prepared and their structures characterized by X-ray crystallography. The novel complexes are [{V(III)(2)(μ-hpnbpda)}(2){μ-(C(6)H(5)O)(2)PO(2)}(2)(μ-O)(2)]·6CH(3)OH (1), [{V(III)(2)(μ-tphpn)(μ-η(3)-HPO(4))}(2)(μ-η(4)-PO(4))](ClO(4))(3)·4.5H(2)O (2), and [{(V(IV)O)(2)(μ-tphpn)}(2)(μ-η(4)-PO(4))](ClO(4))(3)·H(2)O (3), where hpnbpda and tphpn are alkoxo-bridging dinucleating ligands. H(3)hpnbpda represents 2-hydroxypropane-1,3-diamino-N,N'-bis(2-pyridylmethyl)-N,N'-diacetic acid, and Htphpn represents N,N,N',N'-tetrakis(2-pyridylmethyl)-2-hydroxy-1,3-propanediamine. A dinuclear vanadium(IV) complex without a phosphate bridge, [(VO)(2)(μ-tphpn)(H(2)O)(2)](ClO(4))(3)·2H(2)O (4), was also prepared and structurally characterized for comparison. The vanadium(III) center in 1 adopts a hexacoordinate structure while that in 2 adopts a heptacoordinate structure. In 1, the two dinuclear vanadium(III) units bridged by the alkoxo group of hpnbpda are further linked by two diphenylphosphato and two oxo groups, resulting in a dimer-of-dimers. In 2, the two vanadium(III) units bridged by tphpn are further bridged by three phosphate ions with two different coordination modes. Complex 2 is oxidized in aerobic solution to yield complex 3, in which two of the three phosphate groups in 2 are substituted by oxo groups.     

Dinuclear and Tetranuclear Cages of Oxodiphenylantimony Phosphinates: Synthesis and Structures

The novel dimeric compounds [Ph(2)Sb(O(2)PR(2))O](2).2CH(2)Cl(2) [R = cycl-C(6)H(11) (2) and cycl-C(8)H(15) (3)] have been synthesized by reacting diphenylantimony trichloride (1) with 3 mol equiv of silver acetate followed by 1 mol equiv of the phosphinic acid. By the same route under more stringent conditions to exclude moisture, the mixed phosphinate-acetate [Ph(2)Sb(O(2)P(C(6)H(11))(2))(O(2)CMe)](2)O (4) was isolated and characterized. Treatment of 2 with acetic acid/water affords the tetranuclear cage Ph(8)Sb(4)O(4)(OH)(2)(O(2)P(C(6)H(11))(2))(2).CH(3)COOH.CH(2)Cl(2) (5); it is possible to convert 5 to 2 by heating it with an excess of the phosphinic acid. Compounds 2, 3, and 5 have been characterized by X-ray structural analysis. All of them possess four membered Sb(2)O(2) rings with hexacoordinated antimony. In 5 the antimony atoms in the two Sb(2)O(2) rings are connected by oxo bridges on two sides to give an Sb(4)O(6) cage. These structures are correlated with those of known tin cages.     

小分子配体诱导合成N,N-二苄基二硫代氨基甲酸镉(II)配合物及晶体结构

4,4'-联吡啶与二苄基二硫代氨基甲酸镉配合物[Cd(DBTC)₂]₂ (1)反应得到加合物[Cd(DBTC)₂(4,4'-bipy)] (2) (DBTC＝N,N-二苄基二硫代氨基甲酸), 通过晶体结构分析及红外光谱等研究其结构与性质. 结果表明: 引入小分子配体会破坏[Cd(DBTC)₂]₂ (1)的二聚结构, 加入吡啶则得到单核的吡啶加合物[Cd(DBTC)₂py] (3), 而引入4,4'-联吡啶后其结构变为新型的一维链状结构的配位聚合物2, 这种结构在二硫代氨基甲酸金属配合物中少见报道. 也比较了不同配体如吡啶及4,4'-联吡啶对Cd(II)及Zn(II)配合物结构的影响.