Comparative Studies of Selected Criteria Enabling Optimization of the Extraction of Polar Biologically Active Compounds from Alfalfa with Supercritical Carbon Dioxide

The aim of this research was to provide crucial and useful data about the selection of the optimization criteria of supercritical carbon dioxide extraction of alfalfa at a quarter-technical plant. The correlation between more general output, including total phenolics and flavonoids content, and a more specified composition of polar constituents was extensively studied. In all alfalfa extracts, polar bioactive constituents were analyzed by both spectrometric (general output) and chromatographic (detailed output) analyses. Eight specific phenolic acids and nine flavonoids were determined. The most dominant were salicylic acid (221.41 µg g⁻¹), ferulic acid (119.73 µg g⁻¹), quercetin (2.23 µg g⁻¹), and apigenin (2.60 µg g⁻¹). For all seventeen analyzed compounds, response surface methodology and analysis of variance were used to provide the optimal conditions of supercritical fluid extraction for each individual constituent. The obtained data have shown that eight of those compounds have a similar range of optimal process parameters, being significantly analogous for optimization based on total flavonoid content.     

Physicochemical Characterization,Antioxidant Capacity,and Sensory Properties of Murici (Byrsonima crassifolia (L.) Kunth) and Taperebá (Spondias mombin L.) Beverages

Amazonian fruits are excellent sources of bioactive compounds and can be used in beverages to improve the nutritional and sensorial characteristics. The present study aimed to develop a blend of murici (Byrsonima Crassifolia (L.) Kunth) and taperebá (Spondias Mombin L.) through experimental design and investigating the nutritional and sensorial characteristics of fruits and beverages. The murici was highlighted as higher vitamin C content (58.88 mg · 100 g⁻¹) compared to taperebá (25.93 mg · 100 g⁻¹). The murici and taperebá are good sources of total phenolic compounds (taperebá 1304.15 ± 19.14 mgGAE · 100 g⁻¹ and the murici of 307.52 ± 19.73 mg GAE · 100 g⁻¹) and flavonoids (174.87 ± 1.76 μgQE/g and 129.46 ± 10.68 μgQE/g, murici and taperebá, respectively), when compared to other Brazilian fruits. The antioxidant capacity in different methods revealed that the taperebá had a higher average in the results, only in the ORAC method and did not present a significant difference (p > 0.05) in relation to the murici. The beverage development was performed using experimental design 2³, showed through sensory analysis and surface response methodology that murici and high sugar content (between 12.5 and 14.2% of sugar) influenced in sensory acceptance. Our findings indicate that beverages with improved nutrition and a sensory acceptance can be prepared using taperebá and murici fruits.     

Highly Porous Carbons Synthesized from Tannic Acid via a Combined Mechanochemical Salt-Templating and Mild Activation Strategy

Highly porous activated carbons were synthesized via the mechanochemical salt-templating method using both sustainable precursors and sustainable chemical activators. Tannic acid is a polyphenolic compound derived from biomass, which, together with urea, can serve as a low-cost, environmentally friendly precursor for the preparation of efficient N-doped carbons. The use of various organic and inorganic salts as activating agents afforded carbons with diverse structural and physicochemical characteristics, e.g., their specific surface areas ranged from 1190 m²·g⁻¹ to 3060 m²·g⁻¹. Coupling the salt-templating method and chemical activation with potassium oxalate appeared to be an efficient strategy for the synthesis of a highly porous carbon with a specific surface area of 3060 m²·g⁻¹, a large total pore volume of 3.07 cm³·g⁻¹ and high H₂ and CO₂ adsorption capacities of 13.2 mmol·g⁻¹ at −196 °C and 4.7 mmol·g⁻¹ at 0 °C, respectively. The most microporous carbon from the series exhibited a CO₂ uptake capacity as high as 6.4 mmol·g⁻¹ at 1 bar and 0 °C. Moreover, these samples showed exceptionally high thermal stability. Such activated carbons obtained from readily available sustainable precursors and activators are attractive for several applications in adsorption and catalysis.     

Phenolic compounds,essential oil composition,and antioxidant activity of Angelica purpurascens (Avé-Lall.) Gill

In this study, methanol extracts (MEs) and essential oil (EO) of Angelica purpurascens (Avé-Lall.) Gill obtained from different parts (root, stem, leaf, and seed) were evaluated in terms of antioxidant activity, total phenolics, compositions of phenolic compound, and essential oil with the methods of 2,2-azino-bis(3ethylbenzo-thiazoline-6-sulfonic acid (ABTS•⁺), 2,2-diphenyl-1-picrylhydrazil (DPPH•) radical scavenging activities, and ferric reducing/antioxidant power (FRAP), the Folin–Ciocalteu, liquid chromatography−tandem mass spectrometry (LC−MS/MS), and gas chromatography-mass spectrometry (GC−MS), respectively. The root extract of A. purpurascens exhibited the highest ABTS•⁺, DPPH•, and FRAP activities (IC₅₀: 0.05 ± 0.0001 mg/mL, IC₅₀: 0.06 ± 0.002 mg/mL, 821.04 ± 15.96 µM TEAC (Trolox equivalent antioxidant capacity), respectively). Moreover, EO of A. purpurascens root displayed DPPH• scavenging activity (IC₅₀: 2.95 ± 0.084 mg/mL). The root extract had the highest total phenolic content (438.75 ± 16.39 GAE (gallic acid equivalent), µg/mL)). Twenty compounds were identified by LC−MS/MS. The most abundant phenolics were ferulic acid (244.39 ± 15.64 μg/g extract), benzoic acid (138.18 ± 8.84 μg/g extract), oleuropein (78.04 ± 4.99 μg/g extract), and rutin (31.21 ± 2.00 μg/g extract) in seed, stem, root, and leaf extracts, respectively. According to the GC−MS analysis, the major components were determined as α-bisabolol (22.93%), cubebol (14.39%), α-pinene (11.63%), and α-limonene (9.41%) among 29 compounds. Consequently, the MEs and EO of A. purpurascens can be used as a natural antioxidant source.     

Selective Cytotoxicity of Portuguese Propolis Ethyl Acetate Fraction towards Renal Cancer Cells

Renal cell carcinoma is the most lethal cancer of the urological system due to late diagnosis and treatment resistance. Propolis, a beehive product, is a valuable natural source of compounds with bioactivities and may be a beneficial addition to current anticancer treatments. A Portuguese propolis sample, its fractions (n-hexane, ethyl acetate, n-butanol and water) and three subfractions (P1–P3), were tested for their toxicity on A498, 786-O and Caki-2 renal cell carcinoma cell lines and the non-neoplastic HK2 kidney cells. The ethyl acetate fraction showed the strongest toxicity against A498 (IC₅₀ = 0.162 µg mL⁻¹) and 786-O (IC₅₀ = 0.271 µg mL⁻¹) cells. With similar toxicity against 786-O, P1 (IC₅₀ = 3.8 µg mL⁻¹) and P3 (IC₅₀ = 3.1 µg mL⁻¹) exhibited greater effect when combined (IC₅₀ = 2.5 µg mL⁻¹). Results support the potential of propolis and its constituents as promising coadjuvants in renal cell carcinoma treatment.     

A Potential Valorization Strategy of Wine Industry by-Products and Their Application in Cosmetics—Case Study: Grape Pomace and Grapeseed

Grape pomace and grapeseed are agro-industrial by-products, whose inadequate treatment generates socioeconomic and environmental concerns. Nevertheless, it is possible to valorize them by extracting their bioactive compounds, such as antioxidants (phenolic compounds), vitamin E and fatty acids. The bioactive compounds were extracted using solid-liquid extraction. The yields for phenolic compounds were 18.4 ± 0.4% for grape pomace, and 17.4 ± 0.4%, for grapeseed. For the oil, the yields were 13.3 ± 0.2% and 14.5 ± 0.3% for grape pomace and grapeseed. Antioxidant capacity was assessed by the assay with 2,2-diphenyl-1-picrylhydrazyl (DPPH), and showed that phenolic extract has higher antioxidant capacity than the oils. Grape pomace and grapeseed extracts exhibit, correspondingly, values of 90.8 ± 0.8 and 87.5 ± 0.5 of DPPH inhibition and IC₅₀ of 48.9 ± 0.5 and 55.9 ± 0.7 μg_extract·mL_DPPH⁻¹. The antimicrobial capacity was assessed by the disk diffusion test, and revealed that, phenolic extracts inhibit the growth of Staphylococcus aureus and Staphylococcus epidermidis. The obtained extracts were incorporated in 10 face cream formulations, with slight modifications in quantities of formulation stabilizers. Their stability was studied for 35 days, and this revealed the possibility of incorporating extracts and oils obtained from by-products as antioxidants in cosmetics, and replacing synthetic ones. As a future recommendation, microencapsulation of the extracts should be performed, in order to increase their stability.     

Stinging Nettle (Urtica dioica L.) as a Functional Component in Durum Wheat Pasta Production: Impact on Chemical Composition,In Vitro Glycemic Index,and Quality Properties

Stinging nettle (Urtica dioica L.) is a good source of biologically active compounds with proven beneficial health effects. This study aimed to investigate the effect of nettle herb supplementation on chemical composition, including the content of selected minerals and pigments, the in vitro glycemic response, and the cooking and sensory quality of extruded pasta. Tagliatelle-shaped pasta was produced under semi-technical scale by partial replacement of durum wheat semolina with 0, 1, 2, 3, 4, and 5% of lyophilized nettle. The partial substitution with freeze-dried nettle caused a statistically significant (p ≤ 0.05) increase in the content of minerals, especially calcium, iron, potassium, and magnesium in the products. The calcium content in the pasta fortified with 5%-addition of stinging nettle was 175.9 mg 100 g⁻¹ and this concentration was 5.8 times higher than in the control sample. At the same time, high content of chlorophylls and carotenoids (237.58 µg g⁻¹ and 13.35 µg g⁻¹, respectively) was noticed. Enriching pasta with a 0–5% addition of stinging nettle resulted in a statistically significant (p ≤ 0.05) increase in the content of the total dietary fiber (TDF) (from 5.1 g 100 g⁻¹ to 8.82 g 100 g⁻¹) and the insoluble dietary fiber (IDF) (from 2.29 g 100 g⁻¹ to 5.63 g 100 g⁻¹). The lowest hydrolysis index of starch (HI = 17.49%) and the lowest glycemic index (GI = 49.31%) were noted for the pasta enriched with 3% nettle.     

Dynamics of Phloridzin and Related Compounds in Four Cultivars of Apple Trees during the Vegetation Period

Apple trees (Malus domestica Borgh) are a rich source of dihydrochalcones, phenolic acids and flavonoids. Considering the increasing demand for these phytochemicals with health-benefitting properties, the objective of this study was to evaluate the profile of the main bioactive compounds—phloridzin, phloretin, chlorogenic acid and rutin—in apple tree bark, leaves, flower buds and twigs. The variety in the phenolic profiles of four apple tree cultivars was monitored during the vegetation period from March to September using chromatography analysis. Phloridzin, the major glycoside of interest, reached the highest values in the bark of all the tested cultivars in May (up to 91.7 ± 4.4 mg g⁻¹ of the dried weight (DW), cv. ‘Opal’). In the leaves, the highest levels of phloridzin were found in cv. ‘Opal’ in May (82.5 ± 22.0 mg g⁻¹ of DW); in twigs, the highest levels were found in cv. ‘Rozela’ in September (52.4 ± 12.1 mg g⁻¹ of DW). In the flower buds, the content of phloridzin was similar to that in the twigs. Aglycone phloretin was found only in the leaves in relatively low concentrations (max. value 2.8 ± 1.4 mg g⁻¹ of DW). The highest values of rutin were found in the leaves of all the tested cultivars (10.5 ± 2.9 mg g⁻¹ of DW, cv. ‘Opal’ in September); the concentrations in the bark and twigs were much lower. The highest content of chlorogenic acid was found in flower buds (3.3 ± 1.0 mg g⁻¹ of DW, cv. ‘Rozela’). Whole apple fruits harvested in September were rich in chlorogenic acid and phloridzin. The statistical evaluation by Scheffe’s test confirmed the significant difference of cv. ‘Rozela’ from the other tested cultivars. In conclusion, apple tree bark, twigs, and leaves were found to be important renewable resources of bioactive phenolics, especially phloridzin and rutin. The simple availability of waste plant material can therefore be used as a rich source of phenolic compounds for cosmetics, nutraceuticals, and food supplement preparation.     

Development and Validation of Liquid Chromatography-Tandem Mass Spectrometry Methods for the Quantification of Cefquinome,Ceftiofur, and Desfuroylceftiofuracetamide in Porcine Feces with Emphasis on Analyte Stability

Cefquinome and ceftiofur are β-lactam antibiotics used for the treatment of bacterial infections in swine. Although these antimicrobials are administered intramuscularly, the exposure of the gut microbiota to these cephalosporins is not well described. This exposure can contribute to the emergence and spread of antimicrobials in the environment and to the possible spread of antimicrobial resistance genes. To assess the impact of drug administration on the intestinal excretion of these antimicrobials it is essential to measure the amounts of native compound and metabolites in feces. Two (ultra)-high-performance liquid chromatography-tandem mass spectrometry ((U)HPLC–MS/MS) methods were developed and validated, one for the determination of cefquinome and ceftiofur and the other for the determination of ceftiofur residues, measured as desfuroylceftiofuracetamide, in porcine feces. The matrix-based calibration curve was linear from 5 ng g⁻¹ to 1000 ng g⁻¹ for cefquinome (correlation coefficient (r) = 0.9990 ± 0.0007; goodness of fit (gof) = 3.70 ± 1.43) and ceftiofur (r = 0.9979 ± 0.0009; gof = 5.51 ± 1.14) and quadratic from 30 ng g⁻¹ to 2000 ng g⁻¹ for desfuroylceftiofuracetamide (r = 0.9960 ± 0.0020; gof = 7.31 ± 1.76). The within-day and between-day precision and accuracy fell within the specified ranges. Since β-lactam antibiotics are known to be unstable in feces, additional experiments were conducted to adjust the sampling protocol in order to minimize the impact of the matrix constituents on the stability of the analytes. Immediately after sampling, 500 µL of an 8 µg mL⁻¹ tazobactam solution in water was added to 0.5 g feces, to reduce the degradation in matrix.     

Optimising the Polyphenolic Content and Antioxidant Activity of Green Rooibos (Aspalathus linearis) Using Beta-Cyclodextrin Assisted Extraction

Antioxidant activity associated with green rooibos infusions is attributed to the activity of polyphenols, particularly aspalathin and nothofagin. This study aimed to optimise β-cyclodextrin (β-CD)-assisted extraction of crude green rooibos (CGRE) via total polyphenolic content (TPC) and antioxidant activity assays. Response surface methodology (RSM) permitted optimisation of β-CD concentration (0–15 mM), temperature (40–90 °C) and time (15–60 min). Optimal extraction conditions were: 15 mM β-CD: 40 °C: 60 min with a desirability of 0.985 yielding TPC of 398.25 mg GAE·g⁻¹, metal chelation (MTC) of 93%, 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging of 1689.7 µmol TE·g⁻¹, ferric reducing antioxidant power (FRAP) of 2097.53 µmol AAE·g⁻¹ and oxygen radical absorbance capacity (ORAC) of 11,162.82 TE·g⁻¹. Aspalathin, hyperoside and orientin were the major flavonoids, with quercetin, luteolin and chrysoeriol detected in trace quantities. Differences (p < 0.05) between aqueous and β-CD assisted CGRE was only observed for aspalathin reporting the highest content of 172.25 mg·g⁻¹ of dry matter for extracts produced at optimal extraction conditions. Positive, strong correlations between TPC and antioxidant assays were observed and exhibited regression coefficient (R²) between 0.929–0.978 at p < 0.001. These results demonstrated the capacity of β-CD in increasing polyphenol content of green rooibos.     

Modelling and Optimization of Ultrasound-Assisted Extraction of Phenolic Compounds from Black Quinoa by Response Surface Methodology

Phenolic compounds are currently the most investigated class of functional components in quinoa. However, great variability in their content emerged, because of differences in sample intrinsic and extrinsic characteristics; processing-induced factors; as well as extraction procedures applied. This study aimed to optimize phenolic compound extraction conditions in black quinoa seeds by Response Surface Methodology. An ultrasound-assisted extraction was performed with two different mixtures; and the effect of time; temperature; and sample-to-solvent ratio on total phenolic content (TPC) was investigated. Data were fitted to a second-order polynomial model. Multiple regression analysis and analysis of variance were used to determine the fitness of the model and optimal conditions for TPC. Three-dimensional surface plots were generated from the mathematical models. TPC at optimal conditions was 280.25 ± 3.94 mg of Gallic Acid Equivalent (GAE) 100 g⁻¹ dm upon extraction with aqueous methanol/acetone, and 236.37 ± 5.26 mg GAE 100 g⁻¹ dm with aqueous ethanol mixture. The phenolic profile of extracts obtained at optimal conditions was also investigated by HPLC. The two extracting procedures did not show different specificities for phenolic compounds but differed in the extraction yield.     

Valorization of Moroccan Bentonite Deposits: “Purification and Treatment of Margin by the Adsorption Process”

The main objective of this work was to contribute to the reduction in the contamination of phenolic compounds contained in margin by an adsorption process on two types of raw bentonite. The margin used in the studies was collected from a semi-modern oil mill located in the Nador–Morocco region. The results of the physico-chemical analyses showed that the effluents of the oil mills showed that they are highly polluted, particularly in terms of the total suspended solids (TSS), chemical oxygen demand (COD), and iron content of around 154.82 (mg/L), and copper content of 31.72 (mg/L). The mineralogy of bentonites studied by X-ray diffraction (XRD) reveals the existence of two types of montmorillonite; theoretically, the diffraction peak (001) of the montmorillonite appears at 15 Å, with a basal spacing that corresponds to a calcium pole, and the diffraction peak (001) appears at 12Å, with a basal spacing that corresponds to a sodium pole. The specific surface area of the bentonite used is characterized by a large specific surface area, varying between 127.62 m²·g⁻¹ and 693.04 m²·g⁻¹, which is due to the presence of hydrated interleaved cations. This surface is likely to increase in aqueous solution depending on the solid/liquid ratio that modulates the degree of hydration. With a high cation exchange capacity (CEC) (146.54 meq/100 g), samples of margin mixed with raw bentonites at different percentages vary between 5% and 100%. The potential of Moroccan bentonite for the phenol adsorption of 9.17 (g/L) from aqueous solutions was investigated. Adsorption tests have confirmed the effectiveness of these natural minerals in reducing phenolic compounds ranging from 8.72% to 76.23% contained in the margin and the efficiency of heavy metal retention through microelements on raw bentonites. The very encouraging results obtained in this work could aid in the application of adsorption for the treatment of margin.     

Significant Enhancement of the Capacity and Cycling Stability of Lithium-Rich Manganese-Based Layered Cathode Materials via Molybdenum Surface Modification

Lithium-rich manganese-based layered cathode materials are considered to be one of the best options for next-generation lithium-ion batteries, owing to their ultra-high specific capacity (>250 mAh·g⁻¹) and platform voltage. However, their poor cycling stability, caused by the release of lattice oxygen as well as the electrode/electrolyte side reactions accompanying complex phase transformation, makes it difficult to use this material in practical applications. In this work, we suggest a molybdenum surface modification strategy to improve the electrochemical performance of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂. The Mo-modified Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ material exhibits an enhanced discharge specific capacity of up to 290.5 mAh·g⁻¹ (20 mA·g⁻¹) and a capacity retention rate of 82% (300 cycles at 200 mA·g⁻¹), compared with 261.2 mAh·g⁻¹ and a 70% retention rate for the material without Mo modification. The significantly enhanced performance of the modified material can be ascribed to the formation of a Mo-compound-involved nanolayer on the surface of the materials, which effectively lessens the electrolyte corrosion of the cathode, as well as the activation of Mo⁶⁺ towards Ni²⁺/Ni⁴⁺ redox couples and the pre-activation of a Mo compound. This study offers a facile and effective strategy to address the poor cyclability of lithium-rich manganese-based layered cathode materials.     

Umbu Fruit Peel as Source of Antioxidant,Antimicrobial and α-Amylase Inhibitor Compounds

Herein, the extraction of bioactive compounds from umbu fruit peel was optimized using thermal-assisted solid–liquid extraction. In parallel, antioxidant, antimicrobial, and inhibitory effects against α-amylase of optimized extract were also evaluated. The combination of operational conditions including the temperature (32–74 °C), ethanol concentration (13–97%), and solid/liquid ratio (1:10–1:60; w/v) was employed using a rotational central composite design for optimization. The extracts were evaluated for total phenolic compounds (TPC), total flavonoid compounds (TFC) and antioxidant capacity by ABTS^•+, DPPH^• and FRAP assays. The bioactive profile of the optimized extract was obtained by ultra-performance liquid chromatography coupled to quadrupole/time-of-flight mass spectrometry in electrospray ionization in both negative and positive modes. The statistically evaluated results showed that the optimal operational conditions for the recovery of bioactive compounds from umbu fruit peel included 74 °C, 37% ethanol, and a solid–liquid ratio of 1:38. Under these conditions, the obtained values were 1985 mg GAE/100 g, 1364 mg RE/100 g, 122 µmol TE/g, 174 µmol/TE g and 468 µmol Fe²⁺/g for TPC, TFC, ABTS^•+, DPPH^•, and FRAP assays, respectively. In addition, the optimized extract was effective against Gram-positive and Gram-negative bacteria (MBC ranged from 0.060 to 0.24 mg GAE/mL), as well as it was effective to inhibit α-amylase (IC₅₀ value of 0.076 mg GAE/mL). The optimized extract showed to be mainly constituted by phenolic acids and flavonoids.     

Inhibition of Lipid Accumulation and Adipokine Levels in Maturing Adipocytes by Bauhinia rufescens (Lam.) Stem Bark Extract Loaded Titanium Oxide Nanoparticles

The present study reports a cost-effective, environmentally friendly method to increase the bioavailability and bio-efficacy of B. rufescens stem bark extract in the biological system via functional modification as B. rufescens stem bark nanoparticles (BR-TO₂-NPs). The biosynthesis of BR- -NPs was confirmed by UV-visible (UV-vis) and Fourier-transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction analyses. The shifts in FT-IR stretching vibrations of carboxylic and nitro groups (1615 cm⁻¹), the O–H of phenolics or carboxylic acids (3405 cm⁻¹), alkanes, and alkyne groups (2925 and 2224 cm⁻¹) of the plant extract and lattice (455) indicated successful biosynthesis of BR- -NPs. Compared with the stem bark extract, 40 ng/dL dose of BR- -NPs led to a reduction in adipogenesis and an increase in mitochondrial biogenesis-related gene expressions, adiponectin-R1, PPARγC1α, UCP-1, and PRDM16, in maturing-adipocytes. This confirmed the intracellular uptake, bioavailability, and bio-efficiency of BR-TiO₂-NPs. The lipid-lowering capacity of BR-TiO₂-NPs effectively inhibited the metabolic inflammation-related gene markers, IL-6, TNF-α, LTB4-R, and Nf-κb. Further, BR-TiO₂-NPs stimulating mitochondrial thermogenesis capacity was proven by the significantly enhanced CREB-1 and AMPK protein levels in adipocytes. In conclusion, BR-TiO₂-NPs effectively inhibited lipid accumulation and proinflammatory adipokine levels in maturing adipocytes; it may help to overcome obesity-associated comorbidities.     

Antioxidant and Starch-Hydrolyzing Enzymes Inhibitory Properties of Striga-Resistant Yellow-Orange Maize Hybrids

Most of the health benefits derived from cereals are attributed to their bioactive compounds. This study evaluated the levels of the bioactive compounds, and the antioxidant and starch-hydrolyzing enzymes inhibitory properties of six pipeline Striga-resistant yellow-orange maize hybrids (coded AS1828-1, 4, 6, 8, 9, 11) in vitro. The maize hybrids were grown at the International Institute of Tropical Agriculture (IITA), Nigeria. The bioactive compounds (total phenolics, tannins, flavonoids, and phytate) levels, antioxidant (DPPH^• and ABTS^•+ scavenging capacity and reducing power) and starch-hydrolyzing enzymes (α-amylase and α-glucosidase) inhibitory activities of the maize hybrids were determined by spectrophotometry. At the same time, carotenoids were quantified using a reverse-phase HPLC system. The ranges of the bioactive compounds were: 11.25–14.14 mg GAE/g (total phenolics), 3.62–4.67 mg QE/g (total flavonoids), 3.63–6.29 mg/g (tannins), 3.66–4.31% (phytate), 8.92–12.11 µg/g (total xanthophylls), 2.42–2.89 µg/g (total β-carotene), and 3.17–3.77 µg/g (total provitamin A carotenoids). Extracts of the maize hybrids scavenged DPPH^• (SC₅₀: 9.07–26.35 mg/mL) and ABTS^•+ (2.65–7.68 TEAC mmol/g), reduced Fe³⁺ to Fe²⁺ (0.25 ± 0.64–0.43 ± 0.01 mg GAE/g), and inhibited α-amylase and α-glucosidase, with IC₅₀ ranges of 26.28–52.55 mg/mL and 47.72–63.98 mg/mL, respectively. Among the six clones of the maize hybrids, AS1828-9 had the highest (p < 0.05) levels of tannins and phytate and the strongest antioxidant and starch-hydrolyzing enzymes inhibitory activities. Significant correlations were observed between total phenolics and the following: ABTS^•+ (p < 0.01, r = 0.757), DPPH^• SC₅₀ (p < 0.01, r = −0.867), reducing power (p < 0.05, r = 0.633), α-amylase IC₅₀ (p < 0.01, r = −0.836) and α-glucosidase IC₅₀ (p < 0.05, r = −0.582). Hence, the Striga-resistant yellow-orange maize hybrids (especially AS1828-9) may be beneficial for alleviating oxidative stress and postprandial hyperglycemia.     

Determination of 77 Multiclass Pesticides and Their Metabolitesin Capsicum and Tomato Using GC-MS/MS and LC-MS/MS

A quick, sensitive, and reproducible analytical method for the determination of 77 multiclass pesticides and their metabolites in Capsicum and tomato by gas and liquid chromatography tandem mass spectrometry was standardized and validated. The limit of detection of 0.19 to 10.91 and limit of quantification of 0.63 to 36.34 µg·kg⁻¹ for Capsicum and 0.10 to 9.55 µg·kg⁻¹ (LOD) and 0.35 to 33.43 µg·kg⁻¹ (LOQ) for tomato. The method involves extraction of sample with acetonitrile, purification by dispersive solid phase extraction using primary secondary amine and graphitized carbon black. The recoveries of all pesticides were in the range of 75 to 110% with a relative standard deviation of less than 20%. Similarly, the method precision was evaluated interms of repeatability (RSDr) and reproducibility (RSD_wR) by spiking of mixed pesticides standards at 100 µg·kg⁻¹ recorded anRSD of less than 20%. The matrix effect was acceptable and no significant variation was observed in both the matrices except for few pesticides. The estimated measurement uncertainty found acceptable for all the pesticides. This method found suitable for analysis of vegetable samples drawn from market and farm gates.     

Pressurized Extraction as an Opportunity to Recover Antioxidants from Orange Peels: Heat treatment and Nanoemulsion Design for Modulating Oxidative Stress

Orange peel by-products generated in the food industry are an important source of value-added compounds that can be potentially reused. In the current research, the effect of oven-drying (50–70 °C) and freeze-drying on the bioactive compounds and antioxidant potential from Navelina, Salustriana, and Sanguina peel waste was investigated using pressurized extraction (ASE). Sixty volatile components were identified by ASE-GC-MS. The levels of terpene derivatives (sesquitenenes, alcohols, aldehydes, hydrocarbons, and esters) remained practically unaffected among fresh and freeze-dried orange peels, whereas drying at 70 °C caused significative decreases in Navelina, Salustriana, and Sanguina peels. Hesperidin and narirutin were the main flavonoids quantified by HPLC-MS. Freeze-dried Sanguina peels showed the highest levels of total-polyphenols (113.3 mg GAE·g⁻¹), total flavonoids (39.0 mg QE·g⁻¹), outstanding values of hesperedin (187.6 µg·g⁻¹), phenol acids (16.54 mg·g⁻¹ DW), and the greatest antioxidant values (DPPH•, FRAP, and ABTS^•+ assays) in comparison with oven-dried samples and the other varieties. Nanotechnology approaches allowed the formulation of antioxidant-loaded nanoemulsions, stabilized with lecithin, starting from orange peel extracts. Those provided 70–80% of protection against oxidative UV-radiation, also decreasing the ROS levels into the Caco-2 cells. Overall, pressurized extracts from freeze-drying orange peel can be considered a good source of natural antioxidants that could be exploited in food applications for the development of new products of commercial interest.     

Tandem Transesterification–Esterification Reactions Using a Hydrophilic Sulfonated Silica Catalyst for the Synthesis of Wintergreen Oil from Acetylsalicylic Acid Promoted by Microwave Irradiation

SiO₂–SO₃H, with a surface area of 115 m²/g and pore volume of 0.38 cm³g⁻¹, and 1.32 mmol H⁺/g was used as a 20% w/w catalyst for the preparation of methyl salicylate (wintergreen oil or MS) from acetylsalicylic acid (ASA). A 94% conversion was achieved in a microwave reactor over 40 min at 120 °C in MeOH. The resulting crude product was purified by flash chromatography. The catalyst could be reused three times.     

Thermo-Responsive ZnPc-g-TiO2-g-PNIPAM Photocatalysts Sensitized with Phthalocyanines for Water Purification under Visible Light

A novel thermo-responsive 2,9(10),16(17),23(24)-tetrakis[(3-carboxyacrylamide) phthalocyaninato] zinc (ZnPc)-g-TiO₂-g-poly(N-isopropylacrylamide) (PNIPAM) photocatalyst modified with phthalocyanines was prepared. The photocatalyst exhibited thermo-responsive properties due to the introduction of PNIPAM, which performed recovery for reuse above the lower critical solution temperature (LCST, about 26 °C). ZnPc-g-TiO₂-g-PNIPAM effectively expanded the light response range to the visible light region and inhibited the recombination of electron–hole pairs, which enhanced the performance of the photocatalyst. As expected, ZnPc-g-TiO₂-g-PNIPAM (0.3 g/L) exhibited excellent photocatalytic performance for the removal of Rhodamine B (RhB, 1.0 × 10⁻⁵ mol/L) and methylene blue (MB, 1.0 × 10⁻⁵ mol/L) under visible light, which reached 97.2% and 88.6% at 20 °C within 40 min, respectively. Furthermore, the influence of temperature upon photocatalytic performance was also investigated. When the temperature increased from 20 °C to 45 °C, the removal of RhB decreased by approximately 53.8%. The stability of the photocatalyst demonstrated that the photocatalytic activity was still above 80% for the removal of RhB after 3 cycles. Above all, this work provided an intelligent thermally responsive photocatalyst based on phthalocyanine for water purification under visible light.