Synthesis and Cytotoxicity Studies of New (Dimethylamino)‐Functionalised and 7‐Azaindole‐Substituted ‘Titanocene’ Anticancer Agents (7‐Azaindole=1H‐Pyrrolo[2,3‐b]pyridine)

From the carbolithiation of 1‐(cyclopenta‐2,4‐dien‐1‐ylidene)‐N,N‐dimethylmethanamine (=6‐(dimethylamino)fulvene; 3 ) and different lithiated azaindoles 2 (1‐methyl‐7‐azaindol‐2‐yl, 1‐[(diethylamino)methyl]‐7‐azaindol‐2‐yl, and 1‐(methoxymethyl)‐7‐azaindol‐2‐yl), the corresponding lithium cyclopentadienide intermediates 4a – 4c were formed (7‐azaindole=1H‐pyrrolo[2,3‐b]pyridine). The latter underwent a transmetallation reaction with TiCl₄ resulting in the (dimethylamino)‐functionalised ‘titanocenes’ 5a – 5c . When the ‘titanocenes’ 5a – 5c were tested against LLC‐PK cells, the IC₅₀ values obtained were of 8.8, 12, and 87 μM , respectively. The most cytotoxic ‘titanocene’, 5a , with an IC₅₀ value of 8.8 μM is nearly as cytotoxic as cis‐platin, which showed an IC₅₀ value of 3.3 μM when tested on the epithelial pig kidney LLC‐PK cell line, and ca. 200 times better than ‘titanocene dichloride’ itself.     

Short Syntheses of some ‘Decalin‐1,8‐diones’ and their Derivatives: Breaking the Pretended Symmetry

A cheap synthesis of the so‐called ‘decalin‐1,8‐diones’ started with the conjugate (1,4‐) addition of cyclohex‐2‐en‐1‐one derivatives to the γ‐position of the dilithium derivative (buta‐1,3‐diene‐1,1‐bis(olate)) of crotonic acid. Hydrogenation of these ‘1,4‐γ’ adducts and final cyclization afforded the enol tautomers of decalin‐1,8‐diones. Nucleophilic substitutions at these 3‐oxoenols by NH₃ or primary amines created only monoamino products (namely, 3‐oxoenamines) whose reactions with OPCl₃ yielded dihydro(1,3,2)oxazaphosphinin‐2‐one derivatives. The two regioisomers of a trimethyl‐3‐oxoenamine served as models for the constitutional assignments of the two rapidly interconverting (hence, individually NMR‐invisible), tautomeric trimethyl‐3‐oxoenols. Such methyl substitutions served to break the ‘pretended’ symmetry of ‘decalin‐1,8‐dione’. Hydrazine and 3‐oxoenols furnished oxygen‐free indazole derivatives whose N?H bonds exchanged with t_1/2=ca. 0.00035 s at ca. ?58(9) °C.     

Synthesis of Enantiomerically Pure 1,5,5‐Trideuterated cis‐ and trans‐2,4‐Dioxa‐3‐phosphadecalins. 31P‐NMR Evidence of Covalent‐Bond Formation and the Stereochemical Implications in the Course of the Inhibition of δ‐Chymotrypsin

The irreversible inhibition of δ‐chymotrypsin with the enantiomerically pure, P(3)‐axially and P(3)‐equatorially X‐substituted cis‐ and trans‐configurated 2,4‐dioxa‐3‐phospha(1,5,5‐²H₃)bicyclo[4.4.0]decane 3‐oxides (X=F, 2,4‐dinitrophenoxy) was monitored by ³¹P‐NMR spectroscopy. ¹H‐Correlated ³¹P{²H}‐NMR spectra enabled the direct observation of the vicinal coupling (³J) between the P‐atom of the inhibitor and the CH₂O moiety of Ser¹⁹⁵ (=‘Ser¹⁹⁵’(CH₂O)), thus establishing the covalent nature of the ‘Ser¹⁹⁵’(CH₂O? P) bond in the inhibited enzyme. The stereochemical course of the phosphorylation is dependent on the structure of the inhibitor, and neat inversion, both inversion and retention, as well as neat retention of the configuration at the P‐atom was found.     

The ESI CAD fragmentations of protonated 2,4,6‐tris(benzylamino)‐ and tris(benzyloxy)‐1,3,5‐triazines involve benzyl–benzyl interactions: a DFT study

The electrospray ionization collisionally activated dissociation (CAD) mass spectra of protonated 2,4,6‐tris(benzylamino)‐1,3,5‐triazine (1) and 2,4,6‐tris(benzyloxy)‐1,3,5‐triazine (6) show abundant product ion of m/z 181 (C₁₄H₁₃⁺). The likely structure for C₁₄H₁₃⁺ is α‐[2‐methylphenyl]benzyl cation, indicating that one of the benzyl groups must migrate to another prior to dissociation of the protonated molecule. The collision energy is high for the ‘N’ analog (1) but low for the ‘O’ analog (6) indicating that the fragmentation processes of 1 requires high energy. The other major fragmentations are [M + H‐toluene]⁺ and [M + H‐benzene]⁺ for compounds 1 and 6, respectively. The protonated 2,4,6‐tris(4‐methylbenzylamino)‐1,3,5‐triazine (4) exhibits competitive eliminations of p‐xylene and 3,6‐dimethylenecyclohexa‐1,4‐diene. Moreover, protonated 2,4,6‐tris(1‐phenylethylamino)‐1,3,5‐triazine (5) dissociates via three successive losses of styrene. Density functional theory (DFT) calculations indicate that an ion/neutral complex (INC) between benzyl cation and the rest of the molecule is unstable, but the protonated molecules of 1 and 6 rearrange to an intermediate by the migration of a benzyl group to the ring ‘N’. Subsequent shift of a second benzyl group generates an INC for the protonated molecule of 1 and its product ions can be explained from this intermediate. The shift of a second benzyl group to the ring carbon of the first benzyl group followed by an H‐shift from ring carbon to ‘O’ generates the key intermediate for the formation of the ion of m/z 181 from the protonated molecule of 6. The proposed mechanisms are supported by high resolution mass spectrometry data, deuterium‐labeling and CAD experiments combined with DFT calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

Methylene‐Bridged Metallocenes with 2,2′‐Methylenebis[1H‐inden‐1‐yl] Ligands: Synthesis,Characterization, and Polymerization Catalysis of a Synthetically Simple Class of C2‐ and C2v‐Symmetric ansa‐Metallocenes

The acid‐catalyzed reaction between formaldehyde and 1H‐indene, 3‐alkyl‐ and 3‐aryl‐1H‐indenes, and six‐membered‐ring substituted 1H‐indenes, with the 1H‐indene/CH₂O ratio of 2 : 1, at temperatures above 60° in hydrocarbon solvents, yields 2,2′‐methylenebis[1H‐indenes] 1 – 8 in 50–100% yield. These 2,2′‐methylenebis[1H‐indenes] are easily deprotonated by 2 equiv. of BuLi or MeLi to yield the corresponding dilithium salts, which are efficiently converted into ansa‐metallocenes of Zr and Hf. The unsubstituted dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 1′ )]) is the least soluble in organic solvents. Substitution of the 1H‐indenyl moieties by hydrocarbyl substituents increases the hydrocarbon solubility of the complexes, and the presence of a substituent larger than a Me group at the 1,1′ positions of the ligand imparts a high diastereoselectivity to the metallation step, since only the racemic isomers are obtained. Methylene‐bridged ‘ansa‐zirconocenes’ show a noticeable open arrangement of the bis[1H‐inden‐1‐yl] moiety, as measured by the angle between the planes defined by the two π‐ligands (the ‘bite angle’). In particular, of the ‘zirconocenes’ structurally characterized so far, the dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[4,7‐dimethyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 5′ )] is the most open. The mixture [ZrCl₂( 1′ )]/methylalumoxane (MAO) is inactive in the polymerization of both ethylene and propylene, while the metallocenes with substituted indenyl ligands polymerize propylene to atactic polypropylene of a molecular mass that depends on the size of the alkyl or aryl groups at the 1,1′ positions of the ligand. Ethene is polymerized by rac‐dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1‐methyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 2′ )])/MAO to polyethylene waxes (average degree of polymerization ca. 100), which are terminated almost exclusively by ethenyl end groups. Polyethylene with a high molecular mass could be obtained by increasing the size of the 1‐alkyl substituent.     

Calcite‐CO2 mixed into CO2‐free air: a new CO2‐in‐air stable isotope reference material for the VPDB scale

In order to generate a reliable and long‐lasting stable isotope ratio standard for CO₂ in samples of clean air, CO₂ is liberated from well‐characterized carbonate material and mixed with CO₂‐free air. For this purpose a dedicated acid reaction and air mixing system (ARAMIS) was designed. In the system, CO₂ is generated by a conventional acid digestion of powdered carbonate. Evolved CO₂ gas is mixed and equilibrated with a prefabricated gas comprised of N₂, O₂, Ar, and N₂O at close to ambient air concentrations. Distribution into glass flasks is made stepwise in a highly controlled fashion. The isotopic composition, established on automated extraction/measurement systems, varied within very small margins of error appropriate for high‐precision air‐CO₂ work (about ±0.015‰ for δ¹³C and ±0.025‰ for δ¹⁸O). To establish a valid δ¹⁸O relation to the VPDB scale, the temperature dependence of the reaction between 25 and 47°C has been determined with a high level of precision. Using identical procedures, CO₂‐in‐air mixtures were generated from a selection of reference materials; (1) the material defining the VPDB isotope scale (NBS 19, δ¹³C = +1.95‰ and δ¹⁸O = ?2.2‰ exactly); (2) a local calcite similar in isotopic composition to NBS 19 (‘MAR‐J1’, δ¹³C = +1.97‰ and δ¹⁸O = ?2.02‰), and (3) a natural calcite with isotopic compositions closer to atmospheric values (‘OMC‐J1’, δ¹³C = ?4.24‰ and δ¹⁸O = ?8.71‰). To quantitatively control the extent of isotope‐scale contraction in the system during mass spectrometric measurement other available international and local carbonate reference materials (L‐SVEC, IAEA‐CO‐1, IAEA‐CO‐8, CAL‐1 and CAL‐2) were also processed. As a further control pure CO₂ reference gases (Narcis I and II, NIST‐RM 8563, GS19 and GS20) were mixed with CO₂‐free synthetic air. Independently, the pure CO₂ gases were measured on the dual inlet systems of the same mass spectrometers. The isotopic record of a large number of independent batches prepared over the course of several months is presented. In addition, the relationship with other implementations of the VPDB‐scale for CO₂‐in‐air (e.g. CG‐99, based on calibration of pure CO₂ gas) has been carefully established. The systematic high‐precision comparison of secondary carbonate and CO₂ reference materials covering a wide range in isotopic composition revealed that assigned δ‐values may be (slightly) in error. Measurements in this work deviate systematically from assigned values, roughly scaling with isotopic distance from NBS 19. This finding indicates that a scale contraction effect could have biased the consensus results. The observation also underlines the importance of cross‐contamination errors for high‐precision isotope ratio measurements. As a result of the experiments, a new standard reference material (SRM), which consists of two 5‐L glass flasks containing air at 1.6 bar and the CO₂ evolved from two different carbonate materials, is available for distribution. These ‘J‐RAS’ SRM flasks (‘Jena‐Reference Air Set’) are designed to serve as a high‐precision link to VPDB for improving inter‐laboratory comparability. a Copyright © 2005 John Wiley & Sons, Ltd.     

Convenient Synthesis of Various Substituted Homotaurines from Alk‐2‐enamides

Various substituted homotaurines (=3‐aminopropane‐1‐sulfonic acids) 6 were readily synthesized in satisfactory to good yields via the Michael addition of thioacetic acid to alk‐2‐enamides 3 (→ 4 ), followed by LiAlH₄ reduction (→ 5 ) and performic acid oxidation (Scheme 1). The configuration of ‘anti’‐disubstituted homotaurine ‘anti’‐ 6h was deduced from the 3‐(acetylthio)alkanamide (=S‐(3‐amino‐1,2‐dimethyl‐3‐oxopropyl) ethanethioate)‘anti’‐ 4h formed in the Michael addition, which was identified via the Karplus equation analysis, and confirmed by X‐ray diffraction analysis. The current route is an efficient method to synthesize diverse substituted homotaurines, including 1‐, 2‐, and N‐monosubstituted, as well as 1,2‐, 1,N‐, 2,N‐, and N,N‐disubstituted homotaurines (Table).     

Synthesis of 4‐tert‐butyldimethylsilyloxystyrene and its copolymerization with styrene using (η5‐indenyl)trichlorotitanium in the presence of methylaluminoxane

Poly(styrene‐co‐4‐tert‐butyldimethylsilyloxystyrene) as a precursor of hydroxyl‐functionalized syndiotactic polystyrene was successfully synthesized via (η⁵‐indenyl)trichlorotitanium (IndTiCl₃)‐catalyzed copolymerization of styrene with 4‐tert‐butyldimethylsilyloxystyrene in toluene at 25°C in the presence of methylaluminoxane (MAO) ([Al]/[Ti] = 2 000). The amount of styrene derivative incorporated into the polymeric chain for a 20,7 : 1 mole feed ratio of styrene to 4‐tert‐butyldimethylsilyloxystyrene was found to be 1,8 mol‐% from a ¹H NMR analysis. The styrene derivative was successfully prepared from 4‐hydroxybenzaldehyde via first protecting the hydroxyl group using tert‐butyldimethylchlorosilane followed by the ‘Wittig‐type’ reaction with the ‘Tebbe’ reagent. The yield was about 82 wt.‐% on the basis of the initial amount of 4‐hydroxybenzaldehyde used.     

Synthesis of Imidazo[2,1‐a]isoquinolines from α‐Tosyloxyketones and 1‐Aminoisoquinoline in Ionic Liquid Solvent

The room temperature ionic liquid n‐butylpyridinium tetrafluoroborate (BPyBF₄) is used as a ‘green’ recyclable alternative to classical molecular solvents for the cyclocondensation of α‐tosyloxyketones with 1‐aminoisoquinoline to prepare imidazo[2,1‐a]isoquinolines in good yields.     

Conformations of the Nine‐Membered Ring in the B‐Nor‐5,10‐secosteroids. X‐Ray and NMR Analysis

The conformations of (Z)‐ and (E)‐5‐oxo‐B‐nor‐5,10‐secocholest‐1(10)‐en‐3β‐yl acetates ( 2 and 3 , resp.) were examined by a combination of X‐ray crystallographic analysis and NMR spectroscopy, with emphasis on the geometry of the cyclononenone moiety. The ¹H‐ and ¹³C‐NMR spectra showed that the unsaturated nine‐membered ring of (E)‐isomer 3 in C₆D₆ and (D₆)acetone solution exists in a sole conformation of type B ₁ , which is similar to its solid‐state conformation. The (Z)‐isomer 2 in C₆D₆, CDCl₃, and (D₆)acetone solution, however, exists in two conformational forms of different families, with different orientation of the carbonyl group, the predominant form (85%) corresponding to the conformation of type A ₁ and the minor (15%) to the conformation A ₂ present also in the crystalline state. In this solid‐state conformations of the nine‐membered ring of both compounds, the 19‐Me and 5‐oxo groups are ‘β’‐oriented. The NMR analysis suggests that the nine‐membered ring of 4 has a conformation of type C ₁ in CDCl₃ solution.     

Synthesis of Macrocyclic Lactones via Ring Transformation of 4‐(ω‐Hydroxyalkyl)‐1,3‐oxazol‐5(4H)‐ones

The synthesis of α‐benzamido‐α‐benzyl lactones 23 of various ring size was achieved either via ‘direct amide cyclization’ by treatment of 2‐benzamido‐2‐benzyl‐ω‐hydroxy‐N,N‐dimethylalkanamides 21 in toluene at 90 – 110° with HCl gas or by ‘ring transformation’ of 4‐benzyl‐4‐(ω‐hydroxyalkyl)‐2‐phenyl‐1,3‐oxazol‐5(4H)‐ones under the same conditions. The precursors were obtained by C‐alkylations of 4‐benzyl‐2‐phenyl‐1,3‐oxazol‐5(4H)‐one ( 15 ) with THP‐ or TBDMS‐protected ω‐hydroxyalkyl iodides. Ring opening of the THP‐protected oxazolones by treatment with Me₂NH followed by deprotection of the OH group gave the diamides 21 , whereas deprotection of the TBDMS series of oxazolones 25 with TBAF followed by treatment with HCl gas led to the corresponding lactones 23 in a one‐pot reaction.     

Characterization of an exception to the ‘even‐electron rule’ upon low‐energy collision induced decomposition in negative ion electrospray tandem mass spectrometry

Electrospray‐generated precursor ions usually follow the ‘even‐electron rule’ and yield ‘closed shell’ fragment ions. We characterize an exception to the ‘even‐electron rule.’ In negative ion electrospray mass spectrometry (ES‐MS), 2‐(ethoxymethoxy)‐3‐hydroxyphenol (2‐hydroxyl protected pyrogallol) easily formed a deprotonated molecular ion (M‐H)^? at m/z 183. Upon low‐energy collision induced decomposition (CID), the m/z 183 precursor yielded a radical ion at m/z 124 as the base peak. The radical anion at m/z 124 was still the major fragment at all tested collision energies between 0 and 50 eV (E_lab). Supported by computational studies, the appearance of the radical anion at m/z 124 as the major product ion can be attributed to the combination of a low reverse activation barrier and resonance stabilization of the product ions. Furthermore, our data lead to the proposal of a novel alternative radical formation pathway in the protection group removal of pyrogallol. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of (1α)‐1,25‐Dihydroxyvitamin D3 with a β‐Positioned Seven‐Carbon Side Chain at C(12)

A convergent synthesis of an analogue of (1α)‐1,25‐dihydroxyvitamin D₃ ( 1b ) with a C₇ side chain at C(12), i.e., of 5 (Fig.), is described. A key step of the synthesis is the assembly of the triene system by a Pd^II‐catalyzed ring closure of an enol triflate (‘bottom’ fragment) followed by coupling of the resulting Pd^II intermediate with an alkenylboronate (‘upper’ fragment) (Scheme 2). The synthetic strategy allows isotopic labelling at the end of the synthesis.     

Holo‐ and Hemidirected Coordination Spheres in a Novel Three‐Dimensional Polymeric KIPbII Heteropolynuclear Complex: X‐Ray Crystal Structure of [KPb(AcO)2(SCN)]n

A novel three‐dimensional polymeric K^IPb^II heteropolynuclear complex, [KPb(AcO)₂(SCN)]_n, with mixed acetate and thiocyanate ligands, has been synthesized and characterized. Its single‐crystal X‐ray structure (Fig. 1) shows three types of K⁺ ions with coordination numbers of seven, and three types of Pb²⁺ ions with coordination numbers of eight, eight, and nine, respectively. The Pb centers (Pb(1) and Pb(3); Fig. 1) with coordination numbers of nine and eight, respectively, possess stereochemically ‘inactive’ electron lone pairs, and the coordination sphere is holodirected. However, the arrangement of O‐, N‐, and S‐atoms for the eight‐coordinated Pb(2) suggests a gap or hole in the coordination geometry around this atom. This ‘hole’ is possibly occupied by a stereochemically ‘active’ electron lone pair of Pb(2), and its coordination sphere is, thus, hemidirected.     

Selenophen‐2‐yl‐Substituted Thiocarbonyl Ylides – at the Borderline of Dipolar and Biradical Reactivity

The reactions of aryl (selenophen‐2‐yl) thioketones with CH₂N₂ occur with spontaneous elimination of N₂, even at low temperature (?65°), to give regioselectively sterically crowded 4,4,5,5‐tetrasubstituted 1,3‐dithiolanes and/or a novel type of twelve‐membered dithia‐diselena heterocycles as dimers of the transient thiocarbonyl S‐methanides. The ratio of these products depends on the type of substituent located at C(4) of the phenyl ring. Whereas the formation of the 1,3‐dithiolanes corresponds to a [3+2] cycloaddition of an intermediate thiocarbonyl ylide with the starting thioketone, the twelve‐memberd ring has to be formed via dimerization of the ‘thiocarbonyl ylide’ with an extended biradical structure.     

A solid‐phase microextraction gas chromatography/ion trap tandem mass spectrometry method for simultaneous determination of ‘foxy smelling compounds’ and 3‐alkyl‐2‐methoxypyrazines in grape juice

2′‐Aminoacetophenone (o‐AAP) was identified as the main cause of the aging note called ‘hybrid note’ or ‘foxy smell’ which is typical of non‐Vitis vinifera grapes. Together with methyl anthranilate (MA), this compound contributes to the typical foxy taint of wines made with non‐Vitis vinifera grapes. 3‐Alkyl‐2‐methoxypyrazines in grapes, with their herbaceous note and very low sensory thresholds, contribute to the aroma of several wines. In this study, a solid‐phase microextraction gas chromatography/ion trap tandem mass spectrometry (SPME‐GC/IT‐MS/MS) method for simultaneous detection of o‐AAP, MA and ethyl‐, isopropyl‐, sec‐butyl‐ and isobutylmethoxypyrazine in grape juice was developed. The method was applied to the study of several grape juices: the time required for analysis was less than 24 min, and the method was considered to be suitable for analysis of ‘foxy compounds’ and methoxypyrazines in grape juice. The high levels of MA and o‐AAP found in Clinton and Siebel grapes confirmed the ‘hybrid’ character of these varieties. Copyright © 2010 John Wiley & Sons, Ltd.     

Cyano‐Bridged ‘Oximato’ Complexes: Synthesis,Structure, and Catalase‐Like Activities

The reaction of the ‘oximato’‐ligand precursor A (Fig. 1) and metal salts with KCN gave two mononuclear complexes [ML(CN)(H₂O)_n](ClO₄) ( 1 and 2 ; L={N‐(hydroxy‐κO)‐α‐oxo‐N′‐[(pyridin‐2‐yl‐κN)methyl[1,1′‐biphenyl]‐4‐ethanimidamidato‐κN′}; M=Co^II ( 1 ), Cu^II ( 2 ); n=2 for Co^II, n=0 for Cu^II; Figs. 2 and 3). The new cyano‐bridged pentanuclear ‘oximato’ complexes [{ML(H₂O)_n(NC)}₄M¹(H₂O)_x](ClO₄)₂ ( 3 – 6 ) and trinuclear complexes [{ML(H₂O)_n(NC)}₂M¹L](ClO₄) ( 7 – 10 ) ([M¹=Mn^II, Cu^II; x=2 for Mn^II, x=0 for Cu^II] were synthesized from mononuclear complexes and characterized by elemental analyses, magnetic susceptibility, molar conductance, and IR and thermal analysis. The four [ML(CN)(H₂O)_n]⁺ moieties are connected by a metal(II) ion in the pentanuclear complexe 3 – 6 , each one involving four cyano bridging ligands (Fig. 4). The central metal ion displays a square‐planar or octahedral geometry, with the cyano bridging ligands forming the equatorial plane. The axial positions are occupied by two aqua ligands in the case of the central Mn‐atom. The two [ML(CN)(H₂O)_n]⁺ moieties and an ‘oximato’ ligand are connected by a metal(II) ion in the trinuclear complexes 7 – 10 , each one involving two cyano bridging ligands (Fig. 5). The central metal ions display a distorted square‐pyramidal geometry, with two cyano bridging ligands and the donor atoms of the tridentate ‘oximato’ ligand. Moreover catalytic activities of the complexes for the disproportionation of hydrogen peroxide (H₂O₂) were also investigated in the presence of 1H‐imidazole. The synthesized homopolynuclear Cu^II complexes 6 and 10 displayed eficiency in disproportion reactions of H₂O₂ producing H₂O and dioxygen thus showing catalase‐like activity.     

Novel Synthesis of 2‐Alkylquinolizinium‐1‐olates and Their 1,3‐Dipolar Cycloaddition Reactions with Acetylenes

Several 2‐alkylquinolizinium‐1‐olates 9 , i.e., heterobetaines, were prepared from ketone 11 , the latter being readily available either from pyridine‐2‐carbaldehyde via a Grignard reaction, followed by oxidation with MnO₂, or from 2‐picolinic acid (=pyridine‐2‐carboxylic acid) via the corresponding Weinreb amide and subsequent Grignard reaction. Mesoionic heterobetaines such as quinolizinium derivatives have the potential to undergo cycloaddition reactions with double and triple bonds, e.g., 1,3‐dipolar cycloadditions or Diels? Alder reactions. We here report on the scope and limitations of cycloaddition reactions of 2‐alkylquinolizinium‐1‐olates 9 with electron‐poor acetylene derivatives. As main products of the reaction, 5‐oxopyrrolo[2,1,5‐de]quinolizines (=‘[2.3.3]cyclazin‐5‐ones’) 19 were formed via a regioselective [2+3] cycloaddition, and cyclohexadienone derivatives, formed via a Diels? Alder reaction, were obtained as side products. The structures of 2‐benzylquinolizinium‐1‐olate ( 9a ) and two ‘[2.3.3]cyclazin‐5‐ones’ 19i and 19l were established by X‐ray crystallography.     

One‐Step Synthesis of Dialkyl 2‐[(4‐Methylphenyl)sulfonyl]‐1H‐pyrrole‐3,4‐dicarboxylates by Reaction of Acetylenedicarboxylates with ‘Tosylmethyl Isocyanide’ (TsMIC) and Triphenylphosphine

The reactive 1 : 1 adducts in the reaction between Ph₃P and dialkyl acetylenedicarboxylates have been trapped with ‘tosylmethyl isocyanide’ (TsMIC ; 1 ) to yield dialkyl 2‐[(4‐methylphenyl)sulfonyl]‐1H‐pyrrole‐3,4‐dicarboxylates 3 (Scheme 1). The structures of the highly functionalized compounds 3 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 2).