过模波导器件的迭代设计方法

从模式保留和转换的角度, 过模波导器件可分为模式转换器、模式保留器和模式综合器. 传统方法只解决其中一种器件的设计或者对器件的某个指标进行改进. 本文在深入分析耦合波理论之后, 提出了过模波导器件的迭代设计方法, 从原理上解决了过模波导器件的设计问题. 该方法能够统一设计三类过模波导器件, 通过添加不同的结构控制方法, 可得到转换效率更高、带宽更宽、结构更紧凑、满足不同工程需求的器件, 而且还能有效设计一些新型器件. 给出了两个设计实例: 双频TM₀₁–TE₁₁模式变换器和光壁馈源喇叭. 双频TM₀₁–TE₁₁模式变换器的两个工作频点为8.75 GHz和10.3 GHz, 波导半径为16 mm, 在两个频点转换效率为99%以上. 光壁馈源喇叭实现TE₁₁模式向高斯束的转换. CST仿真结果验证了这两个器件设计的正确性和有效性. 关键词： 耦合波理论 模式转换器 模式过渡器 迭代法     

Prism-coupled multimode waveguide refractometer

A new refractometer has been developed based on changes in the effective refractive index (RI) of the highest-order TE (or TM) mode in a prism-coupled multimode planar waveguide induced by interaction between an evanescent field and a liquid sample. The waveguide was a 100-mu;m -thick quartz plate fixed on a poly(methyl methacrylate) support containing a flow cell. A pair of prism couplers contacted the quartz plate in the flow-cell region. Such an optical sensor can detect the RI of liquid in a wide range by monitoring the resonant angle of the highest-order mode that changes order number with changes in the sample's RI. When a highest-order mode corresponding to a given RI range is used as the sensor probe, a slight RI change in this range can be detected by measurement of the output light intensity. With this method the sensor was demonstrated to have a resolution of 3x10(-5) for the RI of an aqueous solution. Combining this result with theoretical calculation indicates that the sensor can detect a 0.5-nm-thick monolayer adsorbed from an aqueous solution. Therefore, the sensor is suitable for real-time detection of biomolecular interactions.     

Mode-order converter in a multimode waveguide

A novel device that converts the order of modes in an integrated-optic multimode waveguide was proposed and fabricated. The device consists of two mode splitters and tapered waveguides. Its operation at a wavelength of 1.55 microm was confirmed by observation of the output mode profiles. The cross talk measured by an indirect method was >10.2 dB. The excess loss with reference to a straight multimode waveguide was 1.5 dB, compared with the propagation loss of a straight multimode waveguide.     

Electrooptic modulation in a multimode exodiffused waveguide

The variation of the phase shifts obtained for different modes of an exodiffused electrooptic waveguide modulator has been calculated.The calculated results have been compared to experimental values obtained by using a scanning Fabry-Perot to determine the relative side-band intensities of the modulated light in different modes if a fixed amplitude (20 V) and frequency (300 MHz) electric signal is applied to the modulator. Good agreement has been found between the predictions and the experimental results.     

Method for measuring the phase error distribution of a wideband arrayed waveguide grating in the frequency domain

We describe a method for measuring the phase error distribution of an arrayed waveguide grating (AWG) in the frequency domain when the free spectral range (FSR) of the AWG is so wide that it cannot be covered by one tunable laser source. Our method is to sweep the light frequency in the neighborhoods of two successive peaks in the AWG transmission spectrum by using two laser sources with different tuning ranges. The method was confirmed experimentally by applying it to a 160 GHz spaced AWG with a FSR of 11 THz. The variations in the derived phase error data were very small at +/-0.02 rad around the central arrayed waveguides.     

Compact multimode interference coupler with tapered waveguide geometry

In this paper, a novel MMI coupler, based on general interference, with tapered waveguide geometry has been proposed for reduction of coupling length. The coupling characteristics and power imbalance of the proposed structure are compared with conventional MMI structures by using a mathematical model based on sinusoidal modes. It is seen that the beat length for tapered MMI coupler with angle of taper ∼1.05° is reduced by ∼24% of that of conventional MMI coupler and the coupling characteristics obtained with the mathematical model, match well with those obtained by more sophisticated BPM computer aided design software. The power imbalance for tapered 3 dB MMI coupler is more sensitive to the wavelength than that for conventional 3 dB MMI coupler and variation of power imbalance with fabrication tolerance for both the MMI coupler is almost same.     

Electromagnetic waves propagation in real multimode waveguide structures

A power flow equation describing the power flow of electromagnetic waves in a real multimode waveguide represented by a linear multichannel trasmission system exhibiting an attenuation, dispersion, and an interchannel interaction is solved in three iterative ways. In the case of constant attenuation and constant propagation velocities in all channels and for the convolution interchannel interaction, a closed analytical solution of the problem is presented. Interesting forms of the solution, transfer function, and impulse response of the system which enable us to separate and compare the attenuation, dispersion, and coupling effects independently of each other are derived. The transfer function, the impulse response, and excitation conditions for their measurements are further discussed. Relations which make it possible to compare different experimental data obtained under specific excitation conditions in various laboratories are determined. Finally, a linear system with memory in time is studied and it is shown that the real multimode waveguide as a linear multichannel transmission system can be considered as a general linear system with memory in space.     

Mode-amplitude transformation in multimode waveguide with quasisinusoidal boundary

Amplitude variations of modes (excited by a point source in a multimode waveguide) due to scattering by an uneven boundary are calculated in a Born approximation. The boundary is a sine curve with a smoothly varying (in space) amplitude. It is shown that amplitude distortions of a given mode are chiefly caused by inhomogeneities located on certain (particular to each mode) regions of the surface. The concept of Fresnel zones for the modes is introduced to simplify analysis of the corresponding effects.Institute of Applied Physics, Russian Academy of Sciences. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 35, No. 5, pp. 440–450, May, 1992.     

Direct imaging of multimode interference in a channel waveguide

By use of a near-field scanning optical microscope in collection mode, multimode interference was directly measured in an annealed proton-exchanged LiNbO3 waveguide. Periodic transitions from a single-peaked Gaussianlike intensity distribution to a double-peaked intensity distribution were observed. The intensity distribution along the waveguide was calculated, and the results agree well with the experimental observation.     

Dispersion-based control of modal characteristics for parametric down-conversion in a multimode waveguide

We report generation of near-infrared photon pairs in fundamental spatial modes via type-II spontaneous parametric down-conversion in a periodically poled potassium titanyl phosphate (KTiOPO(4)) nonlinear waveguide supporting multiple transverse modes. This demonstrates experimentally a versatile scheme for controlling the spatial characteristics of the produced nonclassical light based on exploitation of intermodal dispersion. The down-converted photons are characterized by the measurement of the beam quality factors in the heralded regime.     

Investigation of a wideband folded double-ridged waveguide slow-wave system

The folded double-ridged waveguide structure is presented and its properties used for wide-band traveling-wave tube are investigated.Expressions of dispersion characteristics,normalized phase velocity and interaction impedance of this structure are derived and numerically calculated.The calculated results using our theory agree well with those obtained by using the 3D electromagnetic simulation software HFSS.Influences of the ridge-loaded area and broad-wall dimensions on the high frequency characteristics of the novel slow-wave structure are discussed.It is shown that the folded double-ridged waveguide structure has a much wider relative passband than the folded waveguide slow-wave structure and a relative passband of 67% could be obtained,indicating that this structure can operate in broad-band frequency ranges of beam-wave interaction.The small signal gain property is investigated for ensuring the improvement of bandwidth.Meanwhile,with comparable dispersion characteristics,the transverse section dimension of this novel structure is much smaller than that of conventional one,which indicates an available way to reduce the weight of traveling-wave tube.     

Subwavelength focusing and imaging by a multimode optical waveguide

A simple subwavelength focusing system formed by a straight or bent multimode waveguide is investigated numerically. The simulation results indicate that an appropriately designed multimode waveguide can focus the outgoing waves of a point source and form an image with a full width at half-maximum of less than half a wavelength in the near-field area at the other side of the waveguide. The physical mechanism of the subwavelength focusing for this imaging system is explained.     

Ring resonator with multimode waveguide turning-mirror couplers in InGaAsP-InP

Compact In_0.67Ga_0.33As_0.6P_0.4/In_0.71Ga_0.29As_0.74P_0.26 on InP single ring resonators incorporating 2 × 2 multimode interference (MMI) turning-mirror couplers with cross coupling factor of 0.15 have been demonstrated. The form of race tracks is a 15-degree arc of 260 μm radius joined with a 60-degree arc of 110 μm radius, and finished with another 15-degree arc of 260 μm radius. The MMI turning-mirror coupler of 128 μm in length is used in the single ring resonators, which correspond to free spectral ranges of 82 GHz. A contrast of 4 dB, a finesse of nearly 3 and full-width at half-maximum (FWHM) of 0.24 nm for the drop port have been achieved in this single ring resonator. From the experimental value T_max/T_min of 21 dB, the experiment coupling factor coincides with the simulation.     

New design of a beam-steering thermooptic multimode polymer waveguide switch

We present simulations of a Y-branch directional coupler activated using the thermooptic effect in a multimode polymer waveguide. Microheaters embedded beneath both sides of the waveguide at the Y-branch are used to generate an inhomogeneous temperature profile. Through the thermooptic effect, this temperature profile creates a refractive index profile in the channel waveguide material, which steers the beam to one of the two output branches. We determined the expected thermal profiles using finite element modeling (FEM). The transmission of a basic mode through the waveguide was then simulated using the beam propagation method (BPM). The results show that a high contrast ratio (>90%) can be achieved in response times on the order of 1 ms. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.PACS 42.82.Et; 42.70.Jk; 42.79.Ta