Preparation and properties of a new chelating resin containing 1-nitroso-2-naphthol as the functional group

A macroreticular polystyrene-based chelating ion-exchanger containing 1-nitroso-2-naphthol as the functional group has been synthesized. The exchange-capacity of the resin for a number of metal ions such as copper(II), iron(III), cobalt(II), nickel(II), palladium(II) and uranium(VI) as a function of pH has been determined. The sorption and elution characteristics for palladium(II) and uranium(VI) have been thoroughly examined with a view to utilizing the resin for separation and concentration of uranium and palladium. Uranium(VI) has been separated from a mixture of ten other metal ions by sorption on the chelating resin and selective elution with 0.5M sodium carbonate. Palladium(II) has been separated from various metal ions by selective sorption on the resin in 1M hydrochloric acid medium.     

Adsorption of metal ions on crosslinked poly(4-vinylpyridine) resins prepared with a metal ion as template

Poly(4-vinylpyridine) (PVP) was crosslinked with 1,4-dibromobutane with a metal ion as template. The adsorption behavior of copper, cobalt, zinc, and cadmium ions on the obtained resin (DBQP) was studied. The DBQP resin prepared with a metal ion as template preferentially adsorbed the metal ion used as template. The stability constant of the copper complex of DBQP was largest for the DBQP resin prepared with a copper ion as template, which was due to its large entropy change for the complexation.     

新型螯合树脂研究(Ⅰ)——以聚硫醚为主链伯胺型树脂的合成及吸附性能

利用Gabriel反应以聚环硫氯丙烷为起始物合成4种新型的以聚硫醚为主链的伯胺型树脂,研究了树脂的合成条件及吸附性能.这些树脂对贵金属离子有很高的吸附容量,其中每克树脂对Au(Ⅲ)的吸附容量达到5～7mmol,对Ag⁺的为7～9mmol;而对贱金属离子吸附甚少.可望用于贵金属离子Au(Ⅲ)和Ag⁺的分离与富集.     

铜印迹螯合树脂对金属离子的吸附特性

研究了铜印迹螯合树脂与非印迹螯合树脂对金属离子的吸附性能，结果表明：铜印迹树脂对Cu^2 、Ni^2 、Zn^2 的吸附量比非印迹树脂有显著增大,两者对Cu^2 的吸附速率均较快，其表观吸附速率分别为0．044s^-1和0．040s^-1；印迹树脂对Cu^2 的吸附可用Langmuir或Freundlish等温式来描述；其动态吸附曲线与离子的起始浓度相关；用0．5mol／L HCl即可快速洗脱吸附的Cu^2 ，树脂具有较强的再生能力，可以重复使用。     

Complexation of transition metal ions on the surface of carboxyethylated aminopolysiloxanes

The effect of the nature of the sorbent matrix and the state of ions of some transition metals in solution on their sorption by carboxyethylated alumino-, zircono-, and titano-aminopolysiloxanes was studied. Modification of the aminopolysiloxane matrix with zirconia, alumina, or titania results in displacement of the optimal sorption ranges for copper(II), nickel(II), and cobalt(II) to alkaline pH. Comparison of the results of structural studies of the complexes of N-aryl-3-aminopropionic acids in solutions and compositions of equilibrium solutions upon sorption of metal ions from ammonia-acetate buffer systems demonstrated that metal ions are simultaneously coordinated by the functional groups of iminodipropionic acid, which are rigidly attached to on the polysiloxane matrix, and by monodentate molecular ligands (ammonia molecules) present in the buffer solution. A competitive influence of copper(II), nickel(II), and cobalt(II) on the sorption from mixed solutions was established.     

Effect of Complex-Former Ion Concentration on the Selectivity of Metal Ion Sorption on Cross-Linked <Emphasis Type="Italic">N</Emphasis>-2-Sulfoethylchitosan

Copper(II), silver(I), cobalt(II), nickel(II), zinc(II), manganese(II), and magnesium(II) sorption isotherms on cross-linked sulfoethylated chitosan with the degree of sulfoethylation DS = 0.7 (SEC 0.7) have been plotted for the individual or collective presence of these ions in solution have been constructed. The capacities of the studied sorbents for the studied metal ions have been calculated by processing the sorption isotherms. SEC 0.7 is found to have the greatest affinity to copper(II) and silver(I); their presence almost completely suppresses the sorption of associated metal ions. The Redlich–Peterson model gives the best fit to the sorption isotherms for collectively present metal ions, indicating the chemical inhomogeneity of the sorbent surface.     

Preparation and analytical properties of a chelating resin containing phenylalanine groups

A polystyrene-based macroreticular resin containing phenylalanine groups has been prepared and its analytical properties have been investigated and compared with Dowex A-1. The phenylalanine resin shows high selectivity for mercury(II) and copper(II) in the pH region 2-3. The sorption behaviour of copper has been examined in detail, with the intention of using the resin analytically. The important characteristics of the resin are fast equilibration, high selectivity and small volume change between its hydrogen form and metal forms. These enable it to be applied for the rapid concentration of trace amounts of copper in the presence of large amounts of diverse metals. It may be used for the determination of copper in sea-water and the separation of copper/cobalt and copper/nickel.     

Preparation and Metal Sorption Properties of GMA-MMA-DVB Microspheres Functionalized with 2-Aminothiazole

Crosslinked glycidylmethacrylate-methylmethacrylate-divinylbenzen (GMA-MMA-DVB) microspheres were prepared by suspension polymerization. The GMA-MMA-DVB microspheres with an average size of 150–300 μm and surface area of 1.51 m²g^?1 were functionalized with 2-aminothiazole (ATAL). The affinity of the functionalized microspheres for copper, iron, aluminum, lead, cobalt, and nickel ions was examined. The effects of pH, resin amount, shaking time, type, and volume of the elution solution on the sorption and desorption properties of functionalized microspheres for these metal ions were investigated using the batch method. Sorption capacities (0.97–1.12 mmolg^?1), quantitation limits (2.6–3.0 ppb) and recoveries (90–99%) were calculated.     

Adsorption behaviour of metal ions on hydroximate resins

Some new chelating ion-exchange resins containing a hydroxamic acid moiety attached to a divinylbenzene styrene (DVBS) copolymer, i.e. glycine hydroximate in DVBS (GH-DVBS). anthranilic acid hydroximate in DVBS (AAHDVBS), malonic acid dihydroximate in DVBS (MAH-DVBS) and iminodiacetic acid dihydroximate in DVBS (IDAAH-DVBS). have been synthesized and their various physicochemical characteristics studied. The degree of retention of metal ions by the resins at equilibrium has been determined in terms of the molar distribution coefficient (k(d)). In general, the resins having a dihydroximate moiety are found to be more efficient compared to monohydroximate resins. However, it is of interest to note that the monohydroximate derivative of amino acid (GH-DVBS) showed better metal retention capability than the dihydroximate of carboxylic acid (MAH-DVBS). The selectivity of the resins for transition and highly charged metal ions is quite high compared to that for alkaline earth metals. All the synthesized resins can be utilized for the separation of a mixture of metal ions because the differences in the distribution coefficient values are large enough to permit good separations on columns. However, the GH-DVBS resin was tried for the separation of copper cobalt and copper nickel mixtures at pH 5.5 using the column mode of operation.     

Synthesis, characterization and analytical application of a hydroxamic acid resin

A chelating ion-exchange resin with hydroxamic acid functional groups was synthesized from styrene-maleic acid co-polymer cross-linked with divinylbenzene. A resin prepared from equimolar amounts of styrene and maleic anhydride with 0.75 mole% divinylbenzene gives the best sorption characteristics. The selectivity of the resin for metal ions is copper(II) > cobalt(II) > zinc(II) > nickel(II) > manganese(II) > chromium(III) > iron(III) > vanadium(V). Copper(II), chromium(III) and iron(III) in chromium plating baths can be separated by use of the resin and determined spectrophotometrically.     

Synthesis and properties of a chelating resin containing triazolethiol groups

A macroreticular poly(acrylic acid)-based resin with triazolethiol as the functional group has been synthesized. The stability of the resin in acidic media and the behaviour in sorption and desorption of various metal ions have been investigated and compared with those of the acylthiosemicarbazide resin which is an intermediate in synthesis of the triazolethiol resin. Both resins show high affinity for copper(II) silver, cadmium and mercury(II), and high selectivity for silver and mercury(II) at low pH (1–2), and even at pH 7 if EDTA is present. The triazolethiol resin sorbs metal ions faster than the acylthiosemicarbazide resin does and sorbs mercury(II) from high concentrations of acids and neutral salt solutions. This resin has been applied to the concentration of silver and mercury(II) from sea-water samples by column operation.     

Chelating ion-exchangers containing n-substituted hydroxylamine functional groups: Part V. Iron,copper, and uranium separations on Duolite CS-346 resin

The separation of iron(III), copper(II) and uranyl(II) ions from a series of salt solutions by chelating ion exchange on Duolite CS-346 resin by pH control is described. Recoveries of these ions from cobalt and nickel salt solutions were quantitative. Iron may also be separated from copper by selective sorption with pH control, and uranium from iron and copper by selective desorption with sodium carbonate solution as eluent.     

A spectral study of transition-metal complexes on a chelating ion-exchange resin containing aminophosphonic acid groups

The coordination mode of a commercial chelating ion-exchange resin, ES 467, containing aminomethylphosphonic acid groups anchored on a macroporous styrenedivinylbenzene copolymer, with several metal ions, such as chromium(III), cobalt(II), nickel(II), copper(II) and zinc(II) has been studied with the aid of IR, ligand field and ESR spectra. The chelating group of ES 467, aminomethylphosphonic acid, appears to bind different metal ions mainly through oxygen atoms of the phosphonic acid group, though, in the case of those species containing low-loading of metal ions, the secondary amine nitrogen atom also appears to take part in coordination. Most of the metal ions studied seem to be present as six-coordinated species in the polymeric matrix, whereas cobalt(II) species show electronic spectra which are consistent with the presence of both four-coordinated (tetrahedral) and six-coordinated (octahedral) structures of these species. The distribution coefficients for cobalt(II), nickel(II), copper(II) and zinc(II) have been determined and it appears that the resin ES 467 binds copper(II) ions selectively. An attempt has been made to find a possible relationship between the selectivity of the chelating resin and the stereochemistry of the adsorbed metal ions.     

羧甲基壳聚糖/聚乙烯醇/甘油环氧树脂蛇笼型复合螯合膜的制备及对金属离子的吸附性能

以交联甘油环氧树脂交联的聚乙烯醇(PVA)为笼树脂，羧甲基壳聚糖(CCTS)为蛇树脂制备了具有蛇笼结构的复合螯合膜，研究了其对Cu^2 、Ni^2 、Pb^2 、Fe^3 、Zn^2 ，Hg”^2 、Cd^2 等金属离子的吸附性能，研究表明，该树脂对Cu^2 、Ni^2 、Pb^2 有较好的吸附性能，其中PVA是对Cu^2 的吸附的主要贡献者，而CCTS则是在对Ni^2 的吸附中起主要作用。该树脂可以用于含Cu^2 废水的处理。     

Electroless metallization onto pulsed plasma deposited poly(4-vinylpyridine) surfaces

Pulsed plasma-chemical deposition of poly(4-vinylpyridine) is found to be a highly effective way of functionalizing solid surfaces with pyridine ring centers. These surfaces can be metallized via complexation to Pd2+ ions from solution, followed by autocatalytic electroless deposition of either copper or nickel films.     

Azocalix[4]pyrrole Amberlite XAD-2: New polymeric chelating resins for the extraction, preconcentration and sequential separation of Cu(II), Zn(II) and Cd(II) in natural water samples

Two novel azocalix[4]pyrrole Amberlite XAD-2 polymeric chelating resins were synthesized by covalently linking diazotized Amberlite XAD-2 with calix[4]pyrrole macrocycles. The chelating resins were used for extraction, preconcentration and sequential separation of metal ions such as Cu(II), Zn(II) and Cd(II) by column chromatography prior to their determination by UV/vis spectrophotometry or flame atomic absorption spectrophotometry (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES). Various parameters such as effect of pH on absorption, concentration of eluting agents, flow rate, total sorption capacity, exchange kinetics, preconcentration factor, distribution coefficient, breakthrough capacity and resin stability, were optimized for effective separation and preconcentration. The resin showed good ability for the separation of metal ions from binary and ternary mixture on the basis of pH of absorption and concentration of eluting agents. The newly synthesized resins showed good potential for trace enrichment of Cu(II), Zn(II) and Cd(II) metal ions, especially for Cu(II), as compared to the earlier reported resins. The synthesized resins were recycled at least 8-10 times without much affecting column sorption capacity. The presented method was successfully applied for determination of Cu(II), Zn(II) and Cd(II) in natural and ground water samples.     

STUDIES ON THE SYNTHESES AND PROPERTIES OF SNAKE—CAGE TYPE CHELATE RESINS

Using carboxymethyl chitosan(CM-CTS) as snake resin,B-62 resin crosslinked by triethylentetraamine(TETA)as cage resin,a series of novel snake-cage type resin were synthesized.Such factors as the best synthetic conditions,the swelling and regeneration properties.and the sorption capactities of the above mentioned resins for metal ions were investigated.The experimental results show these resins have good swelling properties and mechanical stability,and do not run off in organic and inorganic solvents.The sorption capactities of them for Cu^2+,Ni^2+,Zn^2+,and Pb^2+ were 0.89,0.54,0.32,and 0.22mmol/g,rspectively.     

聚乙烯四唑型螯合树脂及其对重金属离子的吸附性能

采用表面引发原子转移自由基聚合(SI-ATRP)方法将丙烯腈(AN) 接枝到氯甲基化聚苯乙烯树脂(PS-CH₂Cl) 表面, 再与叠氮化钠进行3+2环加成反应, 制备了一种聚乙烯四唑型螯合树脂(PVT-g-PS). 用红外光谱和元素分析对PVT-g-PS树脂进行了表征, 考察了该树脂对Pb(Ⅱ), Ni(Ⅱ)和Cd(Ⅱ)的吸附性能. 在一定聚合时间范围内, 丙烯腈接枝率与SI-ATRP时间呈线性关系, 树脂表面四唑含量及树脂对金属离子的吸附容量随丙烯腈接枝率增大而增大, 说明丙烯腈在树脂表面聚合为活性可控聚合, 树脂表面功能团含量和树脂吸附容量可以用聚合时间调控. 通过分析树脂吸附容量与溶液pH值的关系、 吸附等温线和吸附动力学, 证明3种金属离子的吸附主要是基于配位作用的化学吸附. 当SI-ATRP时间为10 h时, 树脂对Pb(Ⅱ), Ni(Ⅱ)和Cd(Ⅱ)吸附容量高达1.57, 1.68和1.92 mmol/g. 经过10次吸附-解吸循环实验, 树脂的吸附容量无显著变化, 表明新型树脂具有较高的吸附量和良好的重复使用性.     

Adsorption of Cu(II), Zn(II), Ni(II), Pb(II), and Cd(II) from aqueous solution on Amberlite IR-120 synthetic resin

The adsorption of copper(II), zinc(II), nickel(II), lead(II), and cadmium(II) on Amberlite IR-120 synthetic sulfonated resin has been studied at different pH and temperatures by batch process. The effects of parameters such as amount of resin, resin contact time, pH, and temperature on the ion exchange separation have been investigated. For the determination of the adsorption behavior of the resin, the adsorption isotherms of metal ions have also been studied. The concentrations of metal ions have been measured by batch techniques and with AAS analysis. Adsorption analysis results obtained at various concentrations showed that the adsorption pattern on the resin followed Freundlich isotherms. Here we report the method that is applied for the sorption/separation of some toxic metals from their solutions.     

Preparation and analytical properties of a chelating resin functionalized with 1-hydrazinophthalazine ligand

A poly[styrene-co-(divinylbenzene)] resin (XAD-4) functionalized with 1-hydrazinophthalazine ligand has been prepared and its analytical properties investigated. The pH dependence of sorption of metal ion on the resin has been determined for Cu(II), Ni(II), Co(II), Zn(II), Cd(II), Pb(II), Fe(III) and Cr(III). Trace amounts of these metal ions were quantitatively retained on the resin and recovered by eluting with 1 mol l(-1) hydrochloric acid. The resin was found to be selective for Fe(III) and its separation from other metal ions was carried out effectively. Metal ions concentrations were determined using AAS.