A spectral study of transition-metal complexes on a chelating ion-exchange resin containing aminophosphonic acid groups

The coordination mode of a commercial chelating ion-exchange resin, ES 467, containing aminomethylphosphonic acid groups anchored on a macroporous styrenedivinylbenzene copolymer, with several metal ions, such as chromium(III), cobalt(II), nickel(II), copper(II) and zinc(II) has been studied with the aid of IR, ligand field and ESR spectra. The chelating group of ES 467, aminomethylphosphonic acid, appears to bind different metal ions mainly through oxygen atoms of the phosphonic acid group, though, in the case of those species containing low-loading of metal ions, the secondary amine nitrogen atom also appears to take part in coordination. Most of the metal ions studied seem to be present as six-coordinated species in the polymeric matrix, whereas cobalt(II) species show electronic spectra which are consistent with the presence of both four-coordinated (tetrahedral) and six-coordinated (octahedral) structures of these species. The distribution coefficients for cobalt(II), nickel(II), copper(II) and zinc(II) have been determined and it appears that the resin ES 467 binds copper(II) ions selectively. An attempt has been made to find a possible relationship between the selectivity of the chelating resin and the stereochemistry of the adsorbed metal ions.     

Synthesis, characterization and analytical application of a hydroxamic acid resin

A chelating ion-exchange resin with hydroxamic acid functional groups was synthesized from styrene-maleic acid co-polymer cross-linked with divinylbenzene. A resin prepared from equimolar amounts of styrene and maleic anhydride with 0.75 mole% divinylbenzene gives the best sorption characteristics. The selectivity of the resin for metal ions is copper(II) > cobalt(II) > zinc(II) > nickel(II) > manganese(II) > chromium(III) > iron(III) > vanadium(V). Copper(II), chromium(III) and iron(III) in chromium plating baths can be separated by use of the resin and determined spectrophotometrically.     

Synthesis and properties of new chelating resin with a spacer containing alpha-nitroso-beta-naphthol as the functional group

A new chelating ion-exchange resin with a spacer CH₂-NH-C₆H₄- based on a microreticular chloromethylated styrene-divinylbenzene copolymer containing α-nitroso-β-naphthol as a functional group has been synthesized. The sorption characteristics for manganese(II), iron(III), cobalt(II), nickel(II), copper(II), and zinc(II) have been investigated over the pH range 1.0–7.0. The resin is highly stable in acidic and alkaline medium. Iron(III) and cobalt(II); copper(II) and iron(III) are separated very effectively in a column operation by stepwise elution.     

Preparation and properties of a new chelating resin containing 1-nitroso-2-naphthol as the functional group

A macroreticular polystyrene-based chelating ion-exchanger containing 1-nitroso-2-naphthol as the functional group has been synthesized. The exchange-capacity of the resin for a number of metal ions such as copper(II), iron(III), cobalt(II), nickel(II), palladium(II) and uranium(VI) as a function of pH has been determined. The sorption and elution characteristics for palladium(II) and uranium(VI) have been thoroughly examined with a view to utilizing the resin for separation and concentration of uranium and palladium. Uranium(VI) has been separated from a mixture of ten other metal ions by sorption on the chelating resin and selective elution with 0.5M sodium carbonate. Palladium(II) has been separated from various metal ions by selective sorption on the resin in 1M hydrochloric acid medium.     

A new selective and high affinity polymeric complexing agent for transition metal ions

Summary The synthesis and characteristics of a new chelating glycinohydroxamate-containing polymer resin is described. The functionality of the polymer is 1.76 mmolg^–1. The hydrogen capacity, water regain and adsorption capacities for iron(III), cadmium(II), cobalt(II), copper(II), nickel(II) and zinc(II) were measured at various pH values; uptake of the metal ions increased with pH and was quantitative above pH 3 for most of the metal ions. All cations studied showed high exchange rates towards the resin. The half saturation times for iron(III), cadmium(II), copper(II) and zinc(II) were all less than 1 min. The coordination behaviour of the resin was studied with the help of e.p.r., i.r., u.v. and potentiometry. The pK _a of the resin is 10.70 and the log value of the stability constants for iron(III), copper(II), lead(II), zinc(II), cobalt(II), manganese(II), cadmium(II) and nickel(II) were measured as 21.81, 19.50, 19.20, 18.59, 18.51, 18.46, 18.37 and 18.36, respectively, at 25 ° C and I = 0.2M KCl.     

n-arylhydroxamic acids as reagents for vanadium(v) : Spectrophotometric determination of vanadium(v) with n-m-tolyl-p-methoxybenzohydroxamic acid

A study of the coloured complexes of 51 N-arylhydroxamic acids with vanadium(V) in hydrochloric acid media is described. The absorption spectra of the coloured chloroform extracts and the molar absorptivities are compared. The effects of different substituents attached to the carbon and nitrogen atom of the hydroxamic acid functional group are discussed. A rapid extraction-spectrophotometric method for the determination of vanadium(V) is described, employing the most promising of these reagents, N-m-tolyl-p-methoxybenzohydroxamic acid. The method is highly selective and tolerates large amounts of diverse ions usually associated with vanadium-bearing materials including iron(III), aluminium(III), chromium(III), nickel(II), cobalt(II), zinc(II) and manganese(II).     

Separation and concentration of some platinum metal ions with a new chelating resin containing thiosemicarbazide as functional group

A new chelating ion-exchange resin containing thiosemicarbazide as functional group and based on macroreticular polystyrene-divinylbenzene (8%) has been prepared. Its sorption characteristics for palladium(II), platinum(IV), rhodium(III), ruthenium(III) and iridium(III) have been studied. These platinum metal ions can be quantitatively separated by sorption on this chelating resin and selective elution. The resin is highly stable in acid and alkaline solution.     

The mucic acid as chromogenic agent

The absorption spectra in the infrared and vis-uv regions of mucic acid were established. The analytical behavior of mucic acid as a potential chromogenic reagent for the spectrophotometric determination of trace materials was studied. Interactions with iron(III), copper(II), cobalt(II) and (III), nickel(II), vanadium(IV), and uranyl(II) in basic medium were observed.     

Dosage electrochimique du cobalt: I. Etude des Courbes Intensité— Potentiel du Système cobalt(III)/cobalt(II) en Milieu Picolique

Electrochemical determination of cobalt. Part I. Studies of current—voltage curves of the cobalt(III)/cobalt(II) system in picolinic acid mediaAs a preliminary to the development of electrochemical determinations of cobalt in steels, current—voltage curves at a platinum electrode were studied for the systems coblt(III)/cobalt(II) and iron(III)/iron(II) in media containing picolinic acid as complexing agent. Iron(III) oxidizes cobalt(II) in this complexmg medium, and the iron-(II) formed can be determined by an oxidant such as cerium(IV).     

Preparation and analytical properties of a chelating resin functionalized with 1-hydrazinophthalazine ligand

A poly[styrene-co-(divinylbenzene)] resin (XAD-4) functionalized with 1-hydrazinophthalazine ligand has been prepared and its analytical properties investigated. The pH dependence of sorption of metal ion on the resin has been determined for Cu(II), Ni(II), Co(II), Zn(II), Cd(II), Pb(II), Fe(III) and Cr(III). Trace amounts of these metal ions were quantitatively retained on the resin and recovered by eluting with 1 mol l(-1) hydrochloric acid. The resin was found to be selective for Fe(III) and its separation from other metal ions was carried out effectively. Metal ions concentrations were determined using AAS.     

Dosage electrochimique du cobalt : II. Applications aux Aciers à Faible ou à Moyenne Teneurs

Electrochemical determination of cobalt. Part I. Studies of current—voltage curves of the cobalt(III)/cobalt(II) system in picolinic acid mediaAs a preliminary to the development of electrochemical determinations of cobalt in steels, current—voltage curves at a platinum electrode were studied for the systems coblt(III)/cobalt(II) and iron(III)/iron(II) in media containing picolinic acid as complexing agent. Iron(III) oxidizes cobalt(II) in this complexmg medium, and the iron-(II) formed can be determined by an oxidant such as cerium(IV).     

Preconcentration of trace amounts of mercury(II) in water on picolinic acid amide-containing resin

A chelating polystyrene/divinylbenzene-based resin with picolinic acid amide as the functional group was synthesised and characterised by its water regain capacity (0.31 g g^?1), stability towards sulphuric acid and alkali, and metal ion-exchange capacities. Mercury(II) is absorbed maximally at about pH 5.4 and can be eluted with 2 M sulphuric acid with 96% efficiency. It can thus be separated from Na(I), K(I), Ca(Il), Mg(Il), Co(Il), Cd(Il), Ni(II), Zn(II), Cr (III) and Fe (III). The method is applied to determination of mercury (II) in synthetic mixtures and in river water.     

Redox titrations at millimolar concentration in n,n-dimethylformamide media

Potentiometric oxidation-reduction titrations in N,N-dimethylformamide (DMF) have been shown to be valid at millimolar concentrations of titrand. Forward and reverse titrations that involve the oxidants copper(II), chromium(VI), iron(III), and mercury(II) with the reductants titanium(III), cobalt(II), ascorbic acid, cysteine, and thiolactic acid have been examined. Some preliminary results of titanium(III) in DMF titrimetry in the determination of copper and iron in alloys are presented.     

Sorption behaviour of lanthanum(III), neodymium(III), terbium(III), thorium(IV) and uranium(VI) on Amberlite XAD-4 resin functionalized with bicine ligands

The complexing properties (capacity, pH effect, breakthrough curve) of a chelating resin, containing bicine ligands, were investigated for La(III), Nd(III), Tb(III), Th(IV) and U(VI). Trace amounts of these metal ions were quantitatively retained on the resin and recovered by eluting with 1 M hydrochloric acid. The capacity of the resin for La(III), Nd(III), Tb(III), Th(IV) and U(VI) was found to be 0.35, 0.40, 0.42, 0.25 and 0.38 mmol g(-1), respectively. Separation of U(VI) and Th(IV) from Ni(II), Zn(II), Co(II) and Cu(II) in a synthetic solution was carried out.     

Amberlite XAD-7 impregnated with Xylenol Orange: a chelating collector for preconcentration of Cd(II), Co(II), Cu(II), Ni(II), Zn(II) and Fe(III) ions prior to their determination by flame AAS

A new chelating resin, Xylenol Orange coated Amberlite XAD-7, was prepared and used for preconcentration of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) prior to their determination by flame atomic absorption spectrophotometry. The optimum pH values for quantitative sorption of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) are 4.5-5.0, 4.5, 4.0-5.0, 4.0, 5.0 and 5.0-7.0, respectively, and their desorptions by 2 mol L(-1) HCl are instantaneous. The sorption capacity of the resin has been found to be 2.0, 2.6, 1.6, 1.6, 2.6 and 1.8 mg g(-1) of resin for Cd, Co, Cu, Fe, Ni and Zn, respectively. The tolerance limits of electrolytes, NaCl, NaF, NaI, NaNO3, Na2SO4 and of cations, Mg2+ and Ca2+ in the sorption of the six metal ions are reported. The preconcentration factor was between 50 and 200. The t1/2 values for sorption are found to be 5.3, 2.9, 3.2, 3.3, 2.5 and 2.6 min for the six metals, respectively. The recoveries are between 96.0 and 100.0% for the different metals at preconcentration limits between 10 to 40 ng mL(-1). The preconcentration method has been applied to determine the six metal ions in river water samples after destroying the organic matter (if present in very large amount) with concentrated nitric acid (RSD < or = 8%, except for Cd for which it is upto 12.6%) and cobalt content of vitamin tablets with RSD of approximately 3.0%.     

Preconcentration of Nickel(II) in White Wine Using Quinoxaline-2,3-dithiol and a Finely Divided Anion-Exchange Resin for the Determination by Solid-Phase Spectrophotometry

A simple and sensitive method for the determination of trace amounts of nickel(II) is described. The method is based on the adsorptive enrichment of nickel(II) as the complex with quinoxaline-2,3-dithiol using a finely divided anion-exchange resin, collection of the resin on a membrane filter by filtration, and direct measurement of the absorbance of the resultant circular thin layer by reflective spectrophotometry at 605 nm. In the presence of interfering cations such as copper(II) and cobalt(II) a sample solution is first filtered, after the addition of ammonium thiocyanate and Zephiramine, to extract these cations onto a membrane filter as the ion-pair precipitate formed between the metal-thiocyanate complex anions and Zephiramine cations, then nickel(II) in the filtrate is determined. Interferences from iron(III), silver(I), bismuth(III), cadmium(II), mercury(II), indium(III), palladium(II), platinum(IV), tin(IV), and zinc(II) can also be eliminated. The proposed method was applied to the determination of nickel in white wine. The concentrations of nickel found in 5-ml aliquots of 10 different wine samples were in the range 16.1-68.0 ng ml⁻¹.     

Silaned glass beads for the preconcentration and spectrophotometric determination of cobalt with 2-(2-pyridylazo)-5-diethylaminophenol

Silaned glass beads are applied for the preconcentration and spectrophotometric determination of cobalt with 2-(2-pyridylazo)-5-diethylaminophenol (PADAP). Traces of cobalt are collected as the coloured PADAP complex on a column of the beads, and the complex is then eluted with a small volume of ethanol-hydrochloric acid mixture and the absorbance of the eluate is measured at 575 nm. The cobalt can easily be concentrated by a factor of 50-500 in this way, and 0.1-2 mug of cobalt in 100 ml of sample solution can be determined reproducibly. High concentrations of Fe(III), Cr(III), Pb, Zn, Cu(II), Mn(II), Cd, Al, Ca and Mg can be tolerated but Pd(II) interferes.     

Thenoyltrifluoroacetone as a reagent for cobalt

Summary An indirect method is proposed for the determination of cobalt (II) with 2-thenoyltrifluoroacetone at the milligram level. The orange cobalt-TTA chelate can be quantitatively precipitated over the p_H range 4.0–8.0. It is dissolved in acid and estimated as cobalt sulphate. Cobalt(II) can be estimated in presence of silver, mercury(II), strontium, iron(III), chromium (III), thorium, zirconium, uranium, citrate and tartrate. The method is reproducible to within ±1 per cent.     

Dissociation energies and charge distribution of the Co-NO bond for nitrosyl-alpha,beta,gamma,delta-tetraphenylporphinatocobalt(II) and nitrosyl-alpha,beta,gamma,delta-tetraphenylporphinatocobalt(III) in benzonitrile solution

The first two series of Co-NO bond dissociation enthalpies in benzonitrile solution were determined for 12 cobalt(II) nitrosyl porphyrins and for 12 cobalt(III) nitrosyl porphyrins by titration calorimetry with suitable thermodynamic cycles. The results display that the energy scales of the heterolytic Co(III)-NO bond dissociation, the homolytic Co(III)-NO bond dissociation, and the homolytic Co(II)-NO bond dissociation are 14.7-23.2, 15.1-17.5, and 20.8-24.6 kcal/mol in benzonitrile solution, respectively, which not only indicates that the thermodynamic stability of cobalt(II) nitrosyl porphyrins is larger than that of the corresponding cobalt(III) nitrosyl porphyrins for homolysis in benzonitrile solution but also suggests that both cobalt(III) nitrosyl porphyrins and cobalt(II) nitrosyl porphyrins are excellent NO donors, and in addition, cobalt(III) nitrosyl porphyrins are also excellent NO(+) contributors. Hammett-type linear free energy analyses suggest that the nitrosyl group carries negative charges of 0.49 +/- 0.06 and 0.27 +/- 0.04 in T(G)PPCo(II)NO and in T(G)PPCo(III)NO, respectively, which indicates that nitric oxide is an electron-withdrawing group both in T(G)PPCo(II)NO and in T(G)PPCo(III)NO, behaving in a manner similar to Lewis acids rather than to Lewis bases. The energetic and structural information disclosed in the present work is believed to furnish hints to the understanding of cobalt nitrosyl porphyrins' biological functions in vivo.     

Reversed-phase partition chromatographic separations with 2-ethylhexyl dihydrogen phosphate and di-2-ethylhexyl hydrogen phosphate

Di-2-ethylhexyl hydrogen phosphate (HDEHP) and 2-ethylhexyl dihydrogen phosphate (H(2)MEHP) are compared as stationary phases in reversed-phase chromatography of selected lanthanides, strontium, yttrium, barium, manganese(II), iron(III), cobalt(II), nickel, gold(III), platinum(IV), palladium(II) and silver. Chromatograms were mainly developed with hydrochloric acid at various concentrations. In general H(2)MEHP was found to be less satisfactory than HDEHP. Development of chromatograms by dilute aqueous electrolytes on paper is slower and separations of chemically similar metals such as lanthanides is not encouraging. However, movement of lanthanides by EDTA at pH 3 in an aqueous sodium perchlorate medium occurs only on H(2)MEHP-treated paper. Good separations of iron(III) and cobalt(II) are possible on paper treated with either ester, and gold(III) and platinum(IV) are separated on HDEHP-impregnated paper. Column methods for the separation of carrier-free gold-199 and iron-59 from macro-amounts of neutron-irradiated platinum and cobalt, respectively, have been developed.