Analysis of a mixture of a known and an unknown weak acid by titration to a preset pH

The preset-pH titration method has been used to indicate the presence of a second acid when the titration curve (pH vs. volume of added titrant) seems to indicate only one acid. By use of the method even small amounts of propionic acid can be detected in an acetic acid solution despite the small value of Δ log K^H_HA = 0·18. Binary mixtures of acids may bs analysed when one acid is known, and log k^H_HA for the unknown acid may be found. Acetic acid, as the known acid, has been determined together with hydrochloric, mandelic, hydroxyacetic or boric acid or ammonium ion, with an error of about 1%. The method can be used in some cases for titration of ternary mixtures of one known and two unknown acids. Only the sum of the unknown acids can then be determined together with the known acid.     

The role of 70-80% perchloric acid as oxygen donor and the oxidation potentials made available

A study has been made of the probable oxidation potentials provided by perchloric acid in the concentration range 70-80 %. The effect of acid concentration and temperature on the oxidation of chromium, vanadium, cerium, and manganese has been investigated. Available oxidation potentials appear to be 2.0-2.1 V or higher. The monohydrate of perchloric acid, HClO(4).H(2)O, containing 84.6% of perchloric acid, has been made commercially available and authorized for distribution by common carrier. It can be diluted to give acid concentrations from 73.6% (corresponding to HClO(4).2H(2)O) upwards. Perchloric acid mixed with sulphuric acid is equivalent to high concentrations of perchloric acid and can be used for dissolution of ores and destruction of organic matter.     

High-performance liquid chromatographic method for the determination of salicylic acid and its metabolites in urine by direct injection

A direct injection method has been developed for the determination of salicylic acid and its metabolites in urine. Urine samples are treated with hydroxylamine to convert salicyl acyl glucuronide to salicylhydroxamic acid, which can be accurately quantitated by direct injection into a high-performance liquid chromatographic system along with salicylic acid, gentisic acid and salicyluric acid. Salicyl phenolic glucuronide is quantitated by difference after hydrochloric acid hydrolysis at 65 degrees C with no loss of salicylic acid by sublimation or hydrolytic loss of salicyluric acid. This method has been applied to urine samples from human subjects and the results are discussed.     

Analysis of the fatty acid from Bupleurum Chinense DC in China by GC-MS and GC-FID

Fatty acid of the root of the medicinal plant of Bupleurum Chinense DC in China has been investigated by gas chromatography combined with mass spectroscopy. After methyl-esterification, eight fatty acid compositions were identified by GC-MS. A simple and rapid determination of the fatty acid has been firstly developed by GC-FID. The derivatization condition was investigated in order to validate this method. Palmitic acid, palmitoleic acid, oleic acid and linoleic acid were analyzed simultaneously by internal standard method. The validity of method has been examined both experimentally with good recovery, intra-assay precisions and linearity. The quick and accurate method of capillary gas chromatography could be used for the analysis of the fatty acid from Bupleurum Chinense DC.     

Conductometric titration of metal acetates in aqueous medium

Fifteen metal acetates in aqueous medium have been conductometrically titrated with trichloro-acetic acid. The method has been applied to the titration of mono- and bivalent metals and angles at the equivalence point are sharp enough to allow accurate results to be obtained. Metal salts of acids weaker than acetic can be determined following solution in an excess of acetic acid and titration, because the weaker acid which is displaced does not interfere.     

Direct enantiomeric TLC resolution of dl-penicillamine using (R)-mandelic acid and l-tartaric acid as chiral impregnating reagents and as chiral mobile phase additive

DL-Penicillamine has been resolved into its enantiomers by normal-phase TLC using L-tartaric acid as chiral impregnating reagent as well as chiral mobile phase additive, while (R)-mandelic acid has been found to be successful as a chiral impregnating reagent. The solvent system acetonitrile-methanol-water (5:1:1, v/v) was found to be successful when L-tartaric acid was used as impregnating agent while the solvent combination acetonitrile-methanol-(0.5% l-tartaric acid in water, pH 5)-glacial acetic acid (7:1:1.1:0.7, v/v) was successful as mobile phase as it contained L-tartaric acid as the chiral additive. (R)-mandelic acid was successful as chiral impregnating reagent with ethyl acetate-methanol-water (3:1:1, v/v), as the mobile phase. The effects of concentration of chiral selectors, temperature and pH were examined on enantiomeric resolution. The spots were detected with iodine vapors and the detection limits were found to be 0.12 microg for each enantiomer of penicillamine with L-tartaric acid, under both the conditions, and 0.11 microg with (R)-mandelic acid.     

Matrix Effects and Behaviors of Elements in Oxalic Acid Medium by Inductively Coupled Plasma Mass Spectrometry

Because of its high sensitivity, wide dynamic range and relative freedom from interferences, inductively coupled plasma mass spectrometry (ICP-MS) has been developed for the determination of trace and ultra-trace levels of elements in various fields1. Due…     

HYDROGEN ABSTRACTION FROM LIPIDS BY TRIPLET STATES OF DERIVATIZED BENZOPHENONE PHOTOSENSITIZERS

Laser photolysis techniques have been used to characterize the reactivity of triplet state lipoidal benzophenone derivatives toward fatty acids and glycerides in benzene solution. The reactivities of benzophenone-4-heptyl-4'-pentanoic acid (BHPA) toward fatty acid compounds having different configurations of olefinic bonds have been determined. The rates of hydrogen abstraction are found to be lower when compared with similar measurements using benzophenone alone. However, the contribution of physical quenching of the triplet derivative by double bonds also appears to be slightly lower than that found with benzophenone itself. The hydrogen abstraction efficiencies of three other benzophenone derivatives toward linoleic acid in benzene have also been measured. For benzophenone incorporated into a fatty acid molecule, there is a limited relationship between structure and photoreactivity. Finally, these sensitizers have been incorporated into mixed SDS/linoleate micelles to determine the effects of molecular organization on photochemical behavior of the sensitizer and lipid.     

Absolute configuration of 3-hydroxyadipic acid in human urine

A method involving derivatization and combined gas chromatography--mass spectrometry has been developed to separate the enantiomers of 3-hydroxyadipic acid. By combining this method with asymmetric synthesis of the same acid, it has been shown that 3-hydroxyadipic acid excreted in urine consists of at least 95% of the L-enantiomer. This finding supports the hypothesis that dicarboxylic acids are degraded by ordinary beta-oxidation, and indicates that adipic acid may be converted into succinic acid.     

Structure,hydrogen bonding and vibrational spectra of pyruvic acid

The complete vibrational spectra of liquid pyruvic acid and the infrared spectrum of crystalline pyruvic acid at about 20 K have been recorded and analyzed. A vibrational assignment is proposed based on these spectra and comparison with spectra of derivatives of pyruvic acid.The spectra of pyruvic acid can best be interpreted in terms of a cyclic hydrogen-bonded dimer structure in which the two carbonyl groups are in a trans configuration in the pure liquid phase. A similar structure has been reported for crystalline pyruvic acid by X-ray diffraction. In dilute solution the structure appears to be monomeric with an internal hydrogen bond, in essential agreement with the structures of the monomer reported from microwave spectroscopic measurements.     

The use of stabilizers in the UV assay of ascorbic acid

Sodium thiosulphate (0.04%w/v) has been used to stabilize ascorbic acid in aqueous medium. The method has been used to assay ascorbic acid in commercial tablet preparations. It is very accurate, precise and reproducible. It compares favourably with official titrimetric method. The method is simple and can be adopted for the routine assay of ascorbic acid in single component tablet formulations.     

Étude d'équilibres en solution à l'aide des échangeurs d'ions : I Dissociation du perchlorate d'argent et de l'acide nitrique dans les mélanges eau—acide acétique—acide perchlorique ou acide nitrique

A theoretical relationship postulated between the distribution coefficient of a monovalent element and the parameters upon which it depends (acid concentration in solution, dissociation constants of the acid and the salt, selectivity coefficient of exchanged ions) has been verified for the dissociation of silver perchlorate in water—acetic acid—perchloric acid mixtures. The dissociation constants found have been compared with the experimental values obtained by potentiometric measurements. The relationship established has been employed for the determination of nitric acid dissociation constants in water—acetic acid-nitric acid mixtures containing less than 25 % by weight of water. From the results the pK value for nitric acid in pure acetic acid has been evaluated by extrapolation. The theoretical relationship might be used to determine an acid dissociation constant when the dissociation constant of a salt is known and vice versa.     

Trimerization of Isobutene Over Solid Acid Catalysts

Oligomerization of isobutene is a very promising reaction not only for the production of isobutene oligomers such as trimers but also for the separation of isobutene from C₄ mixtures. Several solid acid catalysts have been applied for the continuous oligomerization of isobutene in liquid phase. This review analyzes the trimerization of isobutene over various solid acid catalysts such as zeolites, oxides (zirconias and titanias) and acid resins. Trimers selectivity increases with increasing isobutene conversion, irrespective of catalysts such as zeolites and acid resins. Very stable operation with high trimers selectivity is accomplished with WO _x /ZrO₂ catalyst having tetragonal zirconia or various zeolite catalysts with high Lewis acid site-to-Brønsted acid site ratio (LA/BA ratio). For a good performance, acid resins should be macroporous and strong acid (sulphonic acid group) with high acid concentration. Inorganic catalysts are superior to acid resins because the deactivated inorganic materials can be regenerated by simple calcination. The WO _x /ZrO₂ catalyst may be applied to a commercial process because about several thousand tons of isobutene can be oligomerized per one ton of zirconia catalyst in a catalytic cycle without regeneration. The oligomerization of isobutene may be improved further because the reaction has been started only recently and no research has been done for the optimization of the reaction and catalysts. It is expected to develop a new inorganic catalyst having suitable acidity, LA/BA ratio and phase, etc. by further research. The isobutene trimers, with or without hydrogenation, may be used for various purposes, and the importance of this trimerization reaction will be increased considering the expected surplus of isobutene due to the banned use of methyl-tert-butyl ether.     

Vibrational spectra of linear oligomers of carbonic acid: a quantum chemical study

Gas phase quantum chemical calculations of linear, hydrogen bonded oligomers of carbonic acid have been carried out to examine the feasibility for such species to be the building blocks of crystalline carbonic acid. Infrared and Raman vibrational spectra have been calculated and are compared against experimentally known spectra for two polymorphs of carbonic acid. The calculated anharmonic frequencies of the linear oligomer agree well with the experimental data for the centrosymmetric β-carbonic acid, rather than with that for the α polymorph. These calculations strongly suggest that β-carbonic acid should consist of one-dimensional hydrogen bonded carbonic acid molecules in the anti-anti conformation.     

Thermometrische Schnellanalyse von Martin- und Hochofenschlacken sowie anderen Silicaten

Summary A novel method has been developed for the rapid analysis of silicates. Each component is determined from the temperature variation of the solution resulting from the addition to the test solution of a selectively reacting reagent. By suitable construction of the instrument the concentration of the component to be determined can be read directly in per cent. The determination of a component takes usually 4 to 8 minutes.In the test solution a temperature change proportional to the concentration of the component to be determined has been produced by the following reagents: sulphuric acid for barium, ammonium peroxodisulphate for iron, hydrogen peroxide for titanium, hydrofluoric acid for silicic acid, potassium permanganate for sulphur, ammonium molybdate and hydrogen peroxide for phosphate, potassium permanganate for manganese, potassium oxalate for calcium, diammonium hydrogenphosphate for magnesium, ascorbic acid for chromium. The above components can be determined without any separations. Only in the case of aluminium a separation of silicic acid from aluminium by dehydrating with perchloric acid in necessary. Thereafter the aluminium can be determined with hydrofluoric acid.The precision of the determinations is practically identical with the precision of the usual plant methods.     

Gas chromatographic analysis of flunixin in equine urine after extractive methylation

A quantitative method for the analysis of flunixin, 2-(2-methyl-3-trifluoromethylanilino) nicotinic acid, in equine urine by gas chromatography with nitrogen-phosphorus detection has been developed. Flunixin and the internal standard, mefenamic acid, N-(2,3-xylyl) anthranilic acid, were analysed after extractive methylation of the carboxylic acid group using methyl iodide. The extraction and alkylation conditions of flunixin and mefenamic acid have been studied. The detection limit of the method was 0.25 mumol/l flunixin in urine (74 ng/ml). Flunixin was found to be conjugated to 96.5% in equine urine, and the conjugate was spontaneously hydrolysed to free flunixin. This approach can also be used to confirm the presence of flunixin or mefenamic acid in horse urine in the doping control of racehorses.     

Stability of 5-aminosalicylic acid and its metabolites in plasma at -20 degrees C. Formation of N-beta-D-glucopyranosyl-5-aminosalicylic acid.

The stability of 5-aminosalicylic acid and its metabolites has been investigated when stored frozen. N-beta-D-Glucopyranosyl-5-aminosalicylic acid was formed in considerable amounts concomitant with a decrease in 5-aminosalicylic acid in plasma samples spiked with 5-aminosalicylic acid as well as in standard solutions of 5-aminosalicylic acid buffered with potassium phosphate between pH 5.5 and pH 8.0 with 4.0 mM glucose added and stored at -20 degrees C. Thus N-beta-D-glucopyranosyl-5-aminosalicylic acid might not, as previously described, be a metabolite of 5-aminosalicylic acid but an artifact formed during storage of plasma samples. The N-glucoside formed could be quantitatively degraded to 5-aminosalicylic acid and glucose by adding 0.2 M potassium phosphate buffer pH 3.0 to the sample prior to the analysis. The metabolites of 5-aminosalicylic acid (N-formyl-5-aminosalicylic acid, N-acetyl-5-aminosalicylic acid and N-butyryl-5-aminosalicylic acid) were found to be stable in plasma stored at -20 degrees C for at least eight months.     

Oxidation of propane to acrylic acid and acetic acid over alkaline earth-doped Mo-V-Sb-O_x catalysts

Alkaline earth metal (Mg,Ca,Sr and Ba)-doped Mo-V-Sb-O x catalysts,prepared by a dry-up method,have been investigated for their catalytic performance in the oxidation of propane under different reaction conditions.The catalysts have been characterized by N2 adsorption-desorption,temperature-programmed desorption (TPD) of NH3,SEM and XRD.Influence of water vapor on the catalytic performance,particularly on the selectivities to acetic acid and acrylic acid,has also been studied.The selectivity to acrylic acid was improved significantly by the doping of alkaline earth metals to Mo-V-Sb-O x catalysts.The surface acidic sites of the catalyst decreased with the doping of the catalyst with alkaline earth metals,which ultimately was found to be beneficial for obtaining high selectivity to acrylic acid.The catalytic activity and product selectivities were found to be influenced by the reaction temperature,C3H8/O2 ratio and space velocity.A significant improvement in the selectivity to acrylic acid has also been observed by the addition of water vapor in the feed of propane and oxygen in the oxidation of propane.     

Oxidation of propane to acrylic acid and acetic acid over alkaline earth-doped Mo-V-Sb-Ox catalysts

Alkaline earth metal (Mg, Ca, Sr and Ba)-doped Mo-V-Sb-Ox catalysts, prepared by a dry-up method, have been investigated for their catalytic performance in the oxidation of propane under different reaction conditions. The catalysts have been characterized by N2 adsorption-desorption, temperature-programmed desorption (TPD) of NH3, SEM and XRD. Influence of water vapor on the catalytic performance, particularly on the selectivities to acetic acid and acrylic acid, has also been studied. The selectivity to acrylic acid was improved significantly by the doping of alkaline earth metals to Mo-V-Sb-Ox catalysts. The surface acidic sites of the catalyst decreased with the doping of the catalyst with alkaline earth metals, which ultimately was found to be beneficial for obtaining high selectivity to acrylic acid. The catalytic activity and product selectivities were found to be influenced by the reaction temperature, C3H8/O2 ratio and space velocity. A significant improvement in the selectivity to acrylic acid has also been observed by the addition of water vapor in the feed of propane and oxygen in the oxidation of propane.     

Spectrophotometric method for the determination of sorbic acid in various food samples with iron(III) and 2-thiobarbituric acid as reagents

A simple, rapid and accurate spectrophotometric method has been developed for the determination of sorbic acid in various food samples based on the oxidation of sorbic acid by iron(III) at 100 degrees C to malonaldehyde, which then reacts with 2-thiobarbituric acid to form a reddish brown product. The optimum experimental conditions for colour development have been assessed. Absorbance measurements were made at 529 nm in the presence of 0.4% m/V citric acid. The calibration graph was linear for 0-6 micrograms ml-1 of sorbic acid with a slope of 0.131 A micrograms-1 ml. The recoveries of sorbic acid at concentrations of 164-557 micrograms ml-1 ranged from 96 to 103%. The relative standard deviations of ten replicate determinations of sorbic acid in a synthetic cream soda sample spiked with 573 micrograms ml-1 of sorbic acid and in an onion juice sample containing 82 micrograms ml-1 of sorbic acid were 1.6 and 1.9%, respectively. Interferences from several common food additives can be minimised by extracting sorbic acid with diethyl ether and then back-extracting the acid with sodium hydrogen carbonate. The method has been applied successfully to the determination of sorbic acid in a wide range of food samples including beverages, cake, cake mate, garlic bread sprinkle, onion juice, oyster flavoured sauce and grenadine syrup.