Quantitative separation of gallium from zinc, copper, indium, iron(III) and other elements by cation-exchange chromatography in hydrobromic acid-acetone medium

Gallium can be separated from Zn, Cu(II), In, Cd, Pb(II), Bi(III), Au(III), Pt(IV), Pd(II), Tl(III), Sn(IV) and Fe(III) by elution of these elements with 0.50M hydrobromic acid in 80% acetone medium, from a column of AG50W-X4 cation-exchange resin. Gallium is retained and can be eluted with 3M hydrochloric acid. Separations are sharp and quantitative except for iron(III) which shows extensive tailing. With 0.20M hydrobromic acid in 80% acetone as eluting agent, all the species above except iron(III) and copper(II) can be separated from gallium with very large separation factors. Only a 1-g resin column and small elution volumes are required to separate trace amounts and up to 0.5 mmole of gallium from more than 1 g of zinc or the other elements. Hg(II), Rh(III), Ir(IV), Se(IV), Ge(IV), As(III) and Sb(III) have not been investigated, but should be separated together with zinc according to their known distribution coefficients. Relevant elution curves, results for the analysis of synthetic mixtures and for amounts of some elements remaining in the gallium fraction are presented.     

Separation of iron-52 from chromium cyclotron targets on the 2% cross-linked anion-exchange resin AG1-X2 in hydrochloric acid

Iron-52 can be separated from solutions of chromium cyclotron targets by eluting chromium, copper and radioactive impurities with 9.0M hydrochloric acid from a column containing 1.0 g of AG1-X2 anion-exchange resin. Iron-52 is retained and can then be eluted with 6.0M hydrochloric acid containing 0.05M hydrogen iodide or 0.05M sodium iodide. The separations are sharp and quantitative. Less than 2 microg of chromium will remain with the iron-52, from 2.0 g originally present.     

Selective and quantitative separation of zinc and lead from other elements by cation-exchange chromatography in hydrohalic acid-acetone solutions

Zinc and lead can be separated from Cd, Bi(III), In and V(V) by eluting these elements with 0.2M hydrochloric acid in 60% acetone from a column of AG50W-X8 cation-exchange resin, zinc and lead being retained. Mercury(II), Tl(III), As(III), Au(III), Sn(IV), Mo(VI), W(VI) and the platinum metals have not been investigated quantitatively, but from their distribution coefficients, should also be eluted. Vanadium(V), Mo(VI) and W(VI) require the presence of hydrogen peroxide. Zinc and lead can be eluted with 0.5M hydrochloric acid in 60% acetone or 0.5M hydrobromic acid in 65% acetone and determined by AAS; the alkali and alkaline-earth metal ions, Mn(II), Co, Ni, Cu(II), Fe(III), Al, Ga, Cr(III), Ti(IV), Zr, Hf, Th, Sc, Y, La and the lanthanides are retained on the column, except for a small fraction of copper eluted with zinc and lead. Separations are sharp and quantitative. The method has successfully been applied to determination of zinc and lead in three silicate rocks and a sediment.     

Improved separation of cadmium-109 from silver cyclotron targets by anion-exchange chromatography in nitric acid—hydrobromic acid mixtures

A method is presented for improved separation of ¹⁰⁹Cd from silver cyclotron targets. After dissolution of the target material in nitric acid and removal of silver by precipitation with copper metal, at pH 5, the cadmium is separated from zinc, copper and other elements by anion exchange chromatography. The solution in 0.5 M nitric acid plus 0.1 M hydrobromic acid is percolated through a column containing 4 ml of AG1-X8 anion-exchange resin (100–200 mesh), equilibrated with the same acid mixture. Zinc, copper(II) and other elements are eluted with 50 ml of this mixture. Cadmium is retained and finally eluted with 50 ml of 3 M nitric acid. The cadmium is retained much more strongly from the hydrobromic acid mixture than from the 0.02 M hydrochloric acid used for such separations previously; the presence of the strongly absorbed nitrate anion in fairly high concentration completely eliminates the tailing of zinc observed in 0.02 M hydrochloric acid. A typical elution curve and results of quantitative separations are presented.     

Synthesis and properties of a new chelating resin containing the oxime group

A macroreticular polystyrene-based chelating resin with oxime and diethylamino functional groups has been synthesized. The resin is stable in acid and alkaline solutions; no decrease in nitrogen content or capacity for sorption of copper(II) is observed when it is exposed to 3M hydrochloric acid and 1M sodium hydroxide for 7 days. The resin has higher selectivity for copper(II) than for other metal ions tested and the time required for 50% uptake of copper(II) is 15 min. The highest capacity for copper(II) is 2.0 mmole/g at pH 6.0. In a column operation, quantitative recovery of copper(II) is achieved by elution with 1M hydrochloric acid, and the resin can be used repeatedly.     

Chemical analysis of manganese nodules : Part II. Determination of uranium and thorium after anion-exchange separation

A method is described for the determination of uranium and thorium in manganese nodules. After dissolution of the sample in a mixture of perchloric and hydrofluoric acids, uranium is adsorbed on the strongly basic anion-exchange resin Dowex 1 (chloride form) from 6 M hydrochloric acid. The effluent is evaporated and the residue is taken up in 7 M nitric acid—0.25 M oxalic acid; thorium is then isolated quantitatively by anion-exchange on Dowex 1 (nitrate form). Thorium is eluted with 6 M hydrochloric acid and determined spectrophotometrically by the arsenazo III method. Uranium is eluted from the resin in the chloride form with 1 M hydrochloric acid and then separated from iron, molybdenum and other co-eluted elements on a column of Dowex 1 (chloride form); the medium consists of 50% (v/v) tetrahydrofuran, 40% (v/v) methyl glycol and 10% (vv) 6 M hydrochloric acid. After removal of iron and molybdenum by washing the resin with a mixture of the same composition and with pure aqueous 1 M hydrochloric acid, the adsorbed uranium is eluted with 1 M hydrochloric acid and determined by fluorimetry. The method was used successfully for the determination of ppm-quantities of uranium and thorium in 60 samples of manganese nodules from the Pacific Ocean.     

Separation of traces and minor amounts of lead from large amounts of zinc,indium, gallium and other elements on a low cross-linked anion-exchange resin

Lead is separated from gram amounts of Zn, In, Ga, Fe(III), Cu(II), Co(II), Mn(II), U(VI), Ca and Ba on a short column of AG1-X4 anion-exchange resin in the bromide form. Lead is retained from 0.2 M hydrobromic acid while the other elements are eluted completely with this reagent. Lead is then eluted with 2 M nitric acid. Separations are sharp and quantitative and, especially for gram amounts of zinc, much better than those obtained with an 8% cross-linked resin; up to 10 mg of lead can be separated from 2 g of zinc. Results are given for synthetic mixtures and lead is determined in several analytical grade chemicals.     

Separation of traces and larger amounts of bismuth from gram amounts of thallium, mercury, gold and platinum by cation-exchange chromatography on a macroporous resin

Traces and larger amounts of bismuth (up to 50 mg) can be separated from gram amounts of thallium, mercury, gold and platinum (up to 5 g) by sorption from a mixture of 0.1M hydrochloric acid and 0.4M nitric acid on a column containing just 3 g (8.1 ml) of AGMP-50, a macroporous cation-exchange resin. This resin retains bismuth much more strongly than does the usual microporous resin (styrene-DVB with 8% cross-linkage). Other elements are eluted with the same acid mixture as that used for sorption, and bismuth is finally eluted with 1.0M hydrochloric acid. Separations of bismuth are sharp and recoveries quantitative. Only microgram amounts of the other elements remain in the bismuth fraction. Amounts of bismuth as little as 5 mug have been separated from 5 g of thallium, and determined (r.s.d. = 2%) by flame atomic-absorption. Only 100-mug amounts of bismuth have been separated from gram amounts of mercury, gold, and platinum, but there is no reason to believe that smaller or larger amounts of bismuth cannot be separated from these elements and recovered with the same accuracy as that for the separation from thallium. The lower limit of the method is determination of 0.4 mug of bismuth in 10 ml of solution (0.004 absorbance). An elution curve, the relevant distribution coefficients and the results of analysis of synthetic mixtures and two practical samples [thallium metal and mercury(II) nitrate] are presented.     

Preparation and properties of a new chelating resin containing 1-nitroso-2-naphthol as the functional group

A macroreticular polystyrene-based chelating ion-exchanger containing 1-nitroso-2-naphthol as the functional group has been synthesized. The exchange-capacity of the resin for a number of metal ions such as copper(II), iron(III), cobalt(II), nickel(II), palladium(II) and uranium(VI) as a function of pH has been determined. The sorption and elution characteristics for palladium(II) and uranium(VI) have been thoroughly examined with a view to utilizing the resin for separation and concentration of uranium and palladium. Uranium(VI) has been separated from a mixture of ten other metal ions by sorption on the chelating resin and selective elution with 0.5M sodium carbonate. Palladium(II) has been separated from various metal ions by selective sorption on the resin in 1M hydrochloric acid medium.     

Separation of tervalent rare earths and scandium from aluminium, iron(iii), titanium(iv), and other elements by cation-exchange chromatography in hydrochloric acid-ethanol

Tervalent rare earths and Sc are separated from the silicate-forming elements Al, Fe(III), Mg and Ti(IV), and also from Mn(II), U(VI), Be, Ga, In(III), Tl(III), Bi(III), Ni, Zn, Cu(II), Cd and Pb by cation-exchange chromatography. The other elements are eluted with 3.0 M HC1 containing 50% ethanol from a column of 60 ml of AG50W-X8 resin (200-400 mesh) while the rare earths are retained. Separation factors are larger than in aqueous hydrochloric acid. Th, Zr, Hf, Ba, Sr, Ca, K, and Rb are the only elements which accompany the rare earths group, but these can easily be separated by other methods which are described. Relevant distribution coefficients, elution curves and accurate results of quantitative separations of synthetic mixtures are presented.     

Quantitative separation of lanthanides and scandium from barium,strontium and other elements by cation-exchange chromatography in nitric acid

The lanthanides plus yttrium and scandium are separated from Ba, Sr, Ca, Mg, Pb(II), Bi(III), Zn, Mn(II) and U(VI) by eluting these elements with 2.0 M nitric acid from a column of AG50W-X8 cation exchange resin (200-400 mesh). The lanthanides are retained and can then be eluted with 4 M nitric or hydrochloric acid. Separations are quantitative and applicable to microgram and millimolar amounts of the lanthanides and the other elements. Elements such as Cu(II), Co(II), Ni(II), Cd. Hg(II), T1(I). Ag, Be, Ti(IV) and the alkali metals should accompany barium quantitatively according to their known distribution coefficients. Relevant elution curves and results of analysis of synthetic mixtures are presented.     

Preparation and properties of a chelating resin containing the nitrosoresorcinol group

A macroreticular polystyrene-based chelating resin with the nitrosoresorcinol group as the functional group has been synthesized. The resin shows selectivity for copper(II), iron(III), and cobalt(II). The sorption behaviour of cobalt(II) is examined in detail, with the intention of using the resin analytically. Iron(III) and cobalt(II) are separated in a column operation by stepwise elution with oxalic acid solution and hydrochloric acid respectively.     

Improved separation of cadmium from indium,zinc, gallium and other elements by anion-exchange chromatography in hydrobromic nitric acid mixtures

The separation of cadmium from indium, zinc and many other elements is considerably improved by eluting these elements with 0.1 M hydrobromic–0.5 M nitric acid solution from a column of AG1-X8 resin. Cadmium is retained very strongly and can be eluted with 2 M nitric acid or 1 M ammonia–0.2 M ammonium nitrate solution. Separations are sharp and quantitative and from microgram amounts up to 2 g of indium and zinc are separated from amounts of cadmium ranging from micrograms up to 100 mg on a 2-g (4.6 ml) resin column. Ga(II), Fe(III). Mn(II), Co(II), U(VI) and Ni(II) can be separated quantitatively from cadmium in the same way. The behaviour of numerous elements is discussed, with special attention to lead, and relevant elution curves and results from the analysis of synthetic mixtures are presented.     

Determination of antimony in concentrates, ores and non-ferrous materials by atomic-absorption spectrophotometry after iron-lanthanum collection, or by the iodide method after further xanthate extraction

Methods for determining trace and moderate amounts of antimony in copper, nickel, molybdenum, lead and zinc concentrates and in ores are described. Following sample decomposition, antimony is oxidized to antimony(V) with aqua regia, then reduced to antimony(III) with sodium metabisulphite in 6M hydrochloric acid medium and separated from most of the matrix elements by co-precipitation with hydrous ferric and lanthanum oxides. Antimony (>/= 100 mug/g) can subsequently be determined by atomic-absorption spectrophotometry, at 217.6 nm after dissolution of the precipitate in 3M hydrochloric acid. Alternatively, for the determination of antimony at levels of 1 mug/g or more, the precipitate is dissolved in 5M hydrochloric acid containing stannous chloride as a reluctant for iron(III) and thiourea as a complexing agent for copper. Then tin is complexed with hydrofluoric acid, and antimony is separated from iron, tin, lead and other co-precipitated elements, including lanthanum, by chloroform extraction of its xanthate. It is then determined spectrophotometrically, at 331 or 425 nm as the iodide. Interference from co-extracted bismuth is eliminated by washing the extract with hydrochloric acid of the same acid concentration as the medium used for extraction. Interference from co-extracted molybdenum, which causes high results at 331 nm, is avoided by measuring the absorbance at 425 nm. The proposed methods are also applicable to high-purity copper metal and copper- and lead-base alloys. In the spectrophotometric iodide method, the importance of the preliminary oxidation of all of the antimony to antimony(V), to avoid the formation of an unreactive species, is shown.     

Chromatographic separation and colorimetric determination of gold

Gold(III) is selectively sorbed from 1M hydrochloric acid by a short column containing a special acrylate resin. Then the gold is eluted from the column with acetone-hydrochloric acid, and the absorbance of the effluent is measured at 340 nm. Gold(III) may be successfully separated and determined in samples containing many other metal ions.     

Determination of selenium in ores, concentrates and related materials by graphite-furnace atomic-absorption spectrometry after separation by extraction of the 4-nitro-o-phenylenediamine complex

A method for determining approximately 0.01 mug/g or more of selenium in ores, concentrates, rocks, soils, sediments and related materials is described. After sample decomposition selenium is reduced to selenium(IV) by heating in 4M hydrochloric acid and separated from the matrix elements by toluene extraction of its 5-nitropiazselenol complex from approximately 4.2M hydrochloric acid. After the extract has been washed with 2% nitric acid to remove residual iron, copper and chloride, the selenium in the extract is oxidized to selenium(VI) with 20% bromine solution in cyclohexane and stripped into water. This solution is evaporated to dryness in the presence of nickel, and selenium is ultimately determined in a 2% v/v nitric acid medium by graphite-furnace atomic-absorption spectrometry at 196.0 nm with the nickel functioning as matrix modifier. Common ions, including large amounts of iron, copper and lead, do not interfere. More than 1 mg of vanadium(V) and 0.25 mg each of platinum(IV), palladium(II), and gold(III) causes high results for selenium, and more than 1 mg of tungsten(VI) and 2 mg of molybdenum(VI) causes low results. Interference from chromium(VI) is eliminated by reducing it to chromium(III) with hydroxylamine hydrochloride before the formation of the selenium complex.     

Separation of selenite,sulkate and iron by cation-exchange resin

Selenite, sulfate and iron(III) are separated by cation-exchange resin. Microgram amounts of selenite in iron(III) sulfate solution at pH 2 are completely adsorbed on the resin together with the large excess of iron(III). while sulfate passes through. Selenite is eluted with 0.5 N hydrochloric acid, leaving iron(III) in the resin. The procedure is applied to the determination of these elements in natural iron sulfides.     

Application of ion-exchange separations to determination of trace elements in natural waters-IX: simultaneous isolation and determination of uranium and thorium

A method is described for the determination of uranium and thorium in samples of natural waters. After acidification with citric acid the water sample is filtered and sodium citrate and ascorbic acid are added. The resulting solution of pH 3 is passed through a 4-g column of Dowex 1 x 8 (citrate form) on which both uranium and thorium are adsorbed as anionic citrate complexes. Thorium is eluted with 8M hydrochloric acid and separated from co-eluted substances by anion-exchange in 8M nitric acid medium on a separate 2-g column of the same resin in the nitrate form. After complete removal of iron by washing with a mixture consisting of IBMK, acetone and 1M hydrochloric acid (1:8:1 v v ) and treatment of the resin with 6M hydrochloric acid, the uranium is eluted from the 4-g column with 1M hydrochloric acid. In the eluate thorium is determined spectrophotometrically (arsenazo III method) while fluorimetry is employed for the assay of uranium. The procedure was used for the determination of uranium and thorium in numerous water samples collected in Austria, including samples of mineral-waters. The results indicate that a simple relationship exists between the uranium and thorium contents of waters which makes it possible to calculate the approximate thorium content of a sample on the basis of its uranium concentration and vice versa.     

Determination of uranium in minerals and rocks

A method is described for the determination of uranium in minerals and rocks by spectrophotometry and fluorimetry. After treatment of the sample with hydrochloric acid, uranium is separated from matrix elements by adsorption on a column of the strongly basic anion-exchange resin Dowex 1 x 8 from an organic solvent system consisting of IBMK, tetrahydrofuran and 12M hydrochloric acid (1:8:1 v v ). Following removal of iron, molybdenum and co-adsorbed elements by washing first with the organic solvent system and then with 6M hydrochloric acid, the uranium is eluted with 1M hydrochloric acid. In the eluate, uranium is determined by means of the spectrophotometric arsenazo III method or fluorimetrically. The suitability of the method for the determination of both trace and larger amounts of uranium was tested by analysing numerous geochemical reference samples with uranium contents in the range 10(-1)-10(4) ppm. In practically all cases very good agreement of results was obtained.     

The quantitative separation of calcium from magnesium,aluminium and other elements by cation-exchange chromatography in ethanol-hydrochloric acid

Magnesium can be separated from calcium by elution with 3.0 M hydrochloric acid containing 60% ethanol from a column of AG₅₀W-X8 cation-exchange resin. Calcium is retained and can be eluted with 3.0 M hydrochloric acid or 2.0 M nitric acid. The separation factor of (α_Mg^ca=5.6 is considerably higher than that in aqueous hydrochloric acid and comparable to those obtained with organic complexing reagents. Separations are sharp and quantitative; up to 10 mmol of magnesium can be separated from 0.01 mmol of calcium and vice versa on a 60-ml column. Al, Fe(III), Mn, Ni(II), Co(II), Zn, Cd, Cu(II), Pb(II), U(VI), Be, Ga, Ti(IV) in the presence of H₂O₂ and many other elements accompany magnesium and can be separated from calcium quantitatively. Sr, Ba, Zr, Hf, Th, Sc, La and the rare earths are retained together with Ca, but can be separated by other methods.