New masking procedure for selective complexometric determination of copper(II)

A study has been made of a new masking procedure for highly selective complexometric determination of copper(II), based on decomposition of the copper-EDTA complex at pH 5-6. Among the various combinations of masking agents tried, ternary masking mixtures comprising a main complexing agent (thiourea), a reducing agent (ascorbic acid) and an auxiliary complexing agent (thiosemicarbazide or a small amount of 1,10-phenanthroline or 2,2'-dipyridyl) have been found most suitable. An excess of EDTA is added and the surplus EDTA is back-titrated with lead (or zinc) nitrate with Xylenol Orange as indicator (pH 5-6). A masking mixture is then added to decompose the copper-EDTA complex and the liberated EDTA is again back-titrated with lead (or zinc) nitrate. The following cations do not interfere: Ag(+), Hg(2+), Pb(2+), Ni(2+), Bi(3+), As(3+), Al(3+), Sb(3+), Sn(4+), Cd(2+), Co(2+), Cr(3+) and moderate amounts of Fe(3+) and Mn(2+). The notable feature is that consecutive determination of Hg(2+) and Cu(2+) can be conveniently carried out in the presence of other cations.     

Ion-exchanger colorimetry-VI Microdetermination of nickel in natural water

Ion-exchanger colorimetry with 1-(2-pyridylazo)2-naphthol (PAN) has been developed for the determination of nickel at the mug/l. level in natural water. With 1 litre of sample the detection limits are 1.3 x 10(-9)Mi.e., 0.077 mug/l. for fresh water and 5.8 x 10(-9)Mi.e., 0.34 mug/l. for sea-water. The distribution ratio is 5 x 10(4). Copper and zinc, which form coloured species with PAN in the resin phase, can be completely eluted with a masking solution composed of EDTA and thioglycollic acid (pH 7.8). Cobalt can be determined simultaneously by measurement at 628 nm.     

8-quinolinol-5-sulphonic acid as both indicator and masking agent-I: the zinc-ferrocyanide titration

A method has been suggested by which microg amounts of Zn(II) in 10(-5)-10(-6)M solution can be titrated with K(4)Fe(CN)(6) in the presence of heavy metal cations, by using 8-quinolinol-5-sulphonic acid at pH 4 as a combined indicator and masking agent. Cd(II) interferes.     

Simultaneous determination of trace uranium(VI) and zinc(II) by adsorptive cathodic stripping voltammetry with aluminon ligand

Uranium(VI) complexed with aluminon (3-[bis(3-carboxy-4-hydroxy-phenyl)methylene]-6-oxo-1,4-cyclohexadiene-1-carboxylic acid triammonium salt) was determined by adsorptive cathodic stripping voltammetry (ACSV) using a hanging mercury drop electrode. Trace uranium(VI) and zinc(II) can be simultaneously determined in a single scan in the presence of aluminon and urea. Optimal conditions were found to be: accumulation time; 180–200 s, accumulation potential; 50 mV versus Ag/AgCl, scan rate; 40 mV s⁻¹, supporting electrolyte; 0.1 M sodium acetate buffer at pH 6.5–7.0, and concentration of aluminon; 1×10⁻⁶ M. The linear range of uranium(VI) and zinc(II) were observed over the concentration range 2–33 and 30–120 ng ml⁻¹, respectively. The detection limit (S/N=3) are 0.2 ng ml⁻¹ (uranium) and 30 ng ml⁻¹ (zinc). A good reproducibility shows RSDs of 2.5–4.0% (n=10). The procedure offers high selectivity, with the presence of urea masking some metal ions.     

Characterisation of a synthesised fluorescent ligand (4-acridinol-1-sulphonic acid) using nuclear magnetic resonance spectroscopy

The synthesis and complete characterisation of the fluorescent ligand, 4-acridinol-1-sulphonic acid (the acridine analogue of 8-quinolinol-5-sulfonic acid) is described. Using a judicious array of nuclear magnetic resonance spectroscopy experiments, the structural elucidation and full assignment of all proton and carbon chemical shifts were afforded. The 4-acridinol-1-sulphonic acid was found to behave in a similar manner to 8-quinolinol-5-sulphonic acid, forming fluorescent complexes with magnesium(II) and zinc(II). The uncorrected emission maxima for the metal-acridinol complexes were found to be at around 620 nm compared to 505 nm for the respective quinolinol complexes. Unfortunately, preliminary spectrofluorimetric analytical figures of merit revealed that the detection limits of the new acridinol metal complexes were one and a half orders of magnitude poorer than those attained with the corresponding quinolinol ligand. However, in contrast to 8-quinolinol-5-sulphonic acid, the 4-acridinol-1-sulphonic acid ligand showed considerable selectivity for magnesium(II) and zinc(II) over aluminium(III).     

Spectrophotometric determination of trace amounts of cadmium and zinc in waste water with 4-(2-pyridylazo)-resorcinol and mixed ionic and non-ionic surfactants

A spectrophotometric method for determination of trace amounts of cadmium and zinc in waste water with PAR and mixed ionic and non-ionic surfactants is described. The interferences of foreign ions can be eliminated by masking with a mixture of triethanolamine, potassium fluoride, ethylenediamine and sodium hexametaphosphate. By virtue of the difference between the absorbances before and after addition of a little sodium diethyldithiocarbamate, cadmium and zinc can be determined directly in aqueous solution without separation. Beer's law is obeyed for 0-20 microg of Cd or 0-12 microg of Zn in 25 ml of solution. The apparent molar absorptivities at 505 nm are 8.65 x 10(4) l.mole(-1).cm(-1) for Cd and 8.21 x 10(4) l.mole(-1).cm(-1) for Zn. Results obtained by applying the proposed method to waste-water samples agree well with those obtained by atomic-absorption spectrophotometry.     

Spectrophotometric determination of zinc with hydrazidazol in the presence of Triton X-100 and its application in metal analysis

A new spectrophotometric method for the determination of zinc is proposed. The chromogenic agent Hydrazidazol forms a 1:1 chelate with zinc in the presence of Triton X-100 in a medium containing 20-40% ethanol. The molar absorptivity and conditional formation constant have been found to be 2.7 x 1O(4) l.mole(-1).cm(-1) (at 640 nm) and 10(5.32) respectively. Beer's law is obeyed for zinc over the range of 0.2-0.8 mug/ml with a standard deviation of 0.024 mug/ml. The method can be applied to the determination of zinc in cadmium metal and its oxide after preconcentration by selective extraction of zinc thiocyanate into ethyl acetate in the presence of EDTA and thiosulphate as masking agents.     

Spectrophotometric determination of bismuth with semi-xylenol orange and its application in metal analysis

Semi-Xylenol Orange forms a 2 : 1 chelate with bismuth(III), which has a logarithmic value of 3.08 for its conditional formation constant and a molar absorptivity of 4.2 x 10(4) l.mole(-1).cm(-1). Beer's law is obeyed at 540 nm over the range 10-30 mug of Bi(III), with a standard deviation of 1.1 mug (n = 18). Lactic acid is used as an auxiliary complexing agent to prevent olation and oxolation. Interference from up to 1.3 mg of copper can be eliminated by the combined use of masking Cu(II) with thiourea, ascorbic acid and thiosemicarbazide and "post-masking" Bi(III) with sodium chloride. The proposed method has been successfully applied to the direct determination of 0.002% of Bi in lead metal, with a coefficient of variation varying from 3.7 to 6.9%.     

Determination of organo-zinc based fungicides in timber treatments employing gas chromatographic analysis with mass selective detection and/or inductively coupled plasma atomic emission spectroscopy

A method for the determination of zinc octoate (zinc 2-ethylhexanoate) and acypetacs zinc in occupational hygiene samples and wood treatments formulations is described. The zinc carboxylates are liquid-liquid partitioned between toluene and 1 M HCl, with the liberated acids being extracted into the toluene and zinc (chloride) into the acid. The carboxylic acids are then methylated using trimethylsilyldiazomethane-methanol and the resultant methyl esters are selectively and sensitively analysed by gas chromatography with mass selective detection (GC-MS). Alternatively, the zinc content of the acid extract can be analysed by inductively coupled plasma atomic emission spectroscopy (ICP-AES). GC-MS is the preferred method of analysis for zinc octoate, where a single analyte (methyl-2-ethylhexanoate) is produced for analysis. Because acypetacs zinc contains a complex mixture of carboxylates, quantitative GC-MS analysis of the methyl esters produced is impractical and ICP-AES is the preferred method for quantitation. In this case, GC-MS can be used to confirm the identity of the product used. The analysis of occupational hygiene samples (cotton pads, gloves and socks as well as Tenax tubes and GF/A filters) spiked with metal carboxylates is demonstrated. Recoveries around 70-90% and reproducibilities of 5-23% (n=6-8) were typically achieved for the determination of tin octoate (a surrogate for zinc octoate) at spiking levels ranging from 4 to 190 microg per sampling device. Recoveries around 102-106% and reproducibilities of 10-12% (n=5-6) were typically achieved for acypetacs zinc at spiking levels ranging from 100 mg per sampling device. Reaction yields for the octoate methylation reaction were in the region of 85-87%. The method was used to monitor for occupational exposure to zinc octoate and acypetacs zinc during the application of wood treatments to fences.     

Spectrophotometric determination of zinc in copper-base alloys with TAN

TAN reacts with zinc(II) forming a red complex with composition 1:2 Zn(II)-TAN and absorption maximum at 582 nm. Zinc can be determined with this reagent in the presence of Triton X-100, in the pH range 6.20-8.00 with a molar absorptivity of 4.5×10⁴ l/mol/cm Beer's Law was obeyed up to least 1.55 g/ml. Copper interference was eliminated with a mixture of thiosulfate and ascorbic acid and nickel separated by precipitation with dimethylglyoxime. The proposed method was used for zinc determination in several copper-base alloys and the results of analysis in comparison with certified values indicated that the procedure was accurate and precise. A derivative procedure is also proposed, allowing zinc determination with high sensitivity (5-400 ng/ml).     

Spectrophotometric-Complexometric Titrations(Ⅲ)——The Titration of Micro-quantities of Titanium (Using Benzilic Acid as Masking Agent)

When DCTA is used as the titrant,benzilic acid is a specific masking agent for Ti (IV).Using the DCTA-benzilic acid masicing method and spectrophotometric end point,90 ppb of Ti can be [selectively titrated.Micro-quantities of Ti in quartz samples can be accurately titrated without prior seperation.We have found that malonic acid is a specific masking agent for Al.When it is used simultaneously with benzilic acid,Ti and Al or Ti,Al and Fe (II) can be titrated stepwise.     

NICKEL(II) AND ZINC(II) COMPLEXES OF β-ALANINEHYDROXAMIC ACID

Abstract

Potentiometric and spectrophotometric studies of Ni(II) coordination to β-alaninehydroxamix acid (β-Alaha) have shown 4N coordination of β-Alaha for 1:2 species and their planar geometry. The geometry of the species formed in the nickel(II)-β-Alaha below ca. pH 7 is octahedral. The differences between the stabilities of zinc(II)-β-Alaha and zinc(II)-α-alaninehydroxamic acid complexes can be explained by the terdentate coordination of the β-alaninehydroxamic acid.     

The additivity of the absorbance of europium and zinc complexes with xylenol orange and its application in spectrophotometric determination of europium and zinc

It is found experimentally that the absorbance of a mixture of the europium – Xylenol Orange (XO) and zinc — XO complexes in slightly acidic media is equal to the sum of the individual absorbances measured alone, within ±2%. When a mixture of rare earths (instead of europium) is measured together with zinc, the maximum deviation for additivity is within ca. ±3%. On the basis of this additivity of absorbances, a procedure can be devised to determine europium and zinc together spectrophotometrically with XO, and then europium alone after extraction of zinc(II) with trioctylamine / xylene. The interference of aluminium, and copper(II) may be avoided by masking with sulphosalicylic acid and thiourea respectively.     

Synthesis of o,o′-dihydroxyazo compounds and their application to the determination of magnesium and calcium by flow injection analysis

Seven _o,o′-dihydroxyazo dyes were synthesized and examined as spectrophotometric reagents for magnesium and calcium. These reagents are highly sensitive for magnesium (? = 47 000) and calcium (? = 39 000 l mol^?1 cm^?1). Of the reagents synthesized, 2-(2-hydroxy-3,6-disulfo-1-naphthylazo)-5-(N,N-diethylamino)phenol was the best because of its ease of preparation and purification, and its stability in alkaline solution. This dye was applied in the determination of magnesium and calcium by flow injection analysis. The total concentration of magnesium (0.1–1.2 mg 1^?1) and calcium (0.4–4.0 mg 1^?1) was determined by masking iron(III), aluminium(III), copper(II), zinc(II), manganese(II) and cadmium(II) with 2,3-dimercapto-1-propanol (DMP) and triethanolamine (TEA). Magnesium was determined by masking calcium and the other metal ions with a ligand buffer containing barium(II)—EGTA, DMP and TEA. The amount of calcium was obtained as the difference between the two peak heights. Results for the determination of magnesium and calcium in potable water and serum are presented.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.     

Direct spectrophotometric determination of iron in non-ferrous alloys

Disodium 3-(2-pyridyl)-1,2,4-triazine-5,6-di(4'-phenylsulphonate) is used for determination of iron in metal analysis. High selectivity is achieved by using a ligand buffer and substoichiometric masking. Interference from 0.9 mg of Cu(II) can be completely eliminated by combined reduction and masking with ascorbic acid and thiosemicarbazide. Beer's law is obeyed over the range 0.4-1.6 mug/ml iron in the final solution, with a standard deviation of 0.02 mug/ml. The method has been successfully applied to determination of iron (without preseparation) in a number of non-ferrous metals and alloys, with a coefficient of variation of 1.2-5.0%.     

Thiovioluric acid as an analytical reagent--I. Gravimetric determination of palladium

Thiovioluric acid (HTVA) precipitates palladium(II) as the dark-brown complex Pd(TVA)(2) in the pH range 0.3-4.0. It can be used for the gravimetric estimation of palladium(II) alone or in the presence of diverse ions. EDTA, citrate or tartrate can be used to mask Cu(II) and Bi(III). Interference due to Ru(III) has been obviated by the use of citrate as masking agent.     

Efficient light harvesting by using green Zn-porphyrin-sensitized nanocrystalline TiO2 films

A series of novel zinc metalloporphyrins, cyano-3-(2'-(5',10',15',20'-tetraphenylporphyrinato zinc(II))yl)-acrylic acid (Zn-3), 3-(trans-2'-(5',10',15',20'-tetraphenylporphyrinato zinc(II))yl)-acrylic acid (Zn-5), 2-cyano-5-(2'-(5',10',15',20'-tetraphenylporphyrinato zinc(II))yl)-penta-2,4-dienoic acid (Zn-8), 4-(trans-2'-(2' '-(5' ',10' ',15' ',20' '-tetraphenylporphyrinato zinc(II))yl)ethen-1'-yl))-1,2-benzenedicarboxylic acid (Zn-11), and 2-cyano-3-[4'-(trans-2' '-(2' '-(5' ',10' ',15' ',20' '-tetraphenylporphyrinato zinc(II))yl) ethen-1' '-yl)-phenyl]-acrylic acid (Zn-13) were synthesized and characterized by using various spectroscopic techniques. Density functional theory (DFT) and time-dependent DFT (TDDFT) calculations show that key molecular orbitals (MOs) of porphyrins Zn-5 and Zn-3 are stabilized and extended out onto the substituent by pi-conjugation, causing enhancement and red shifts of visible transitions and increasing the possibility of electron transfer from the substituent. The porphyrins were investigated for conversion of sunlight into electricity by constructing dye-sensitized TiO(2) solar cells using an I(-)/I(3)(-) electrolyte. The cells yield close to 85% incident photon-to-current efficiencies (IPCEs), and under standard AM 1.5 sunlight, the Zn-3-sensitized solar cell demonstrates a short circuit photocurrent density of 13.0 +/- 0.5 mA/cm(2), an open-circuit voltage of 610 +/- 50 mV, and a fill factor of 0.70 +/- 0.03. This corresponds to an overall conversion efficiency of 5.6%, making it the most efficient porphyrin-sensitized solar cell reported to date.     

Rapid spectrophotometric determination of palladium in titanium alloys with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol

A rapid spectrophotometric method for the determination of Pd in titanium alloys is proposed. It is based on the reaction of 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol with Pd(II) in a sulphuric acid medium in the presence of ethanol. Beer's law is obeyed up to 40 mug of Pd. The molar absorptivity is 4.5 x 10(4) 1.mole(-1).cm(-1). The standard deviation is 0.3 mug of Pd and the coefficient of variation varies from 0.8 to 3.3%. The elements ordinarily present in such alloys do not interfere. High selectivity is achieved by using fluoroboric acid as masking agent. Improvements in the method of sample decomposition also contribute to the rapidity of the method.     

Unusual frequency dispersion effects of the nonlinear optical response in highly conjugated (polypyridyl)metal-(porphinato)zinc(II) chromophores

The syntheses and electrooptic properties of a new family of nonlinear optical chromophores are reported. These species feature an ethyne-elaborated, highly polarizable porphyrinic component and metal polypyridyl complexes that serve as integral donor and acceptor elements. Examples of this structural motif include ruthenium(II) [5-(4'-ethynyl-(2,2';6',2' '-terpyridinyl))-10,20-bis(2',6'-bis(3,3-dimethyl-1-butyloxy)phenyl)porphinato]zinc(II)-(2,2';6',2' '-terpyridine)(2+) bis-hexafluorophosphate (Ru-PZn); osmium(II) [5-(4'-ethynyl-(2,2';6',2'-terpyridinyl))-10,20-bis(2',6'-bis(3,3-dimethyl-1-butyloxy)phenyl)porphinato]zinc(II)-(2,2';6',2'-terpyridine)(2+) bis-hexafluorophosphate (Os-PZn); ruthenium(II) [5-(4'-ethynyl-(2,2';6',2'-terpyridinyl))-15-(4'-nitrophenyl)ethynyl-10,20-bis(2',6'-bis(3,3-dimethyl-1-butyloxy)phen-yl)porphinato]zinc(II)-(2,2';6',2' '-terpyridine)(2+) bis-hexafluorophosphate (Ru-PZn-A); osmium(II) [5-(4'-ethynyl-(2,2';6',2' '-terpyridinyl))-15-(4'-nitrophenyl)ethynyl-10,20-bis(2',6'-bis(3,3-dimethyl-1-butyloxy)phenyl)porphinato]zinc(II)-(2,2';6',2' '-terpyridine)(2+) bis-hexafluorophosphate (Os-PZn-A); and ruthenium(II) [5-(4'-ethynyl-(2,2';6',2' '-terpyridinyl))osmium(II)-15-(4'-ethynyl-(2,2';6',2'-terpyridinyl))-10,20-bis (2',6'-bis(3,3-dimethyl-1-butyloxy)phenyl)porphinato]zinc(II)-bis(2,2';6',2'-terpyridine)(4+) tetrakis-hexafluorophosphate (Ru-PZn-Os). The frequency dependence of the dynamic hyperpolarizability of these compounds was determined from hyperRayleigh light scattering (HRS) measurements carried out at fundamental incident irradiation wavelengths (lambda(inc)) of 800, 1064, and 1300 nm. These data show that (i) coupled oscillator photophysics and metal-mediated cross-coupling can be exploited to elaborate high beta(0) supermolecules that exhibit significant excited-state electronic communication between their respective pigment building blocks; (ii) high-stability metal polypyridyl compounds constitute an attractive alternative to electron releasing dialkyl- and diarylamino groups, the most commonly used donor moieties in a wide range of established nonlinear optical dyes; (iii) this design strategy enables ready elaboration of chromophores having extraordinarily large dynamic hyperpolarizabilities (beta(lambda) values) at telecommunication relevant wavelengths; and (iv) porphyrin B- and Q-state-derived static hyperpolarizabilities (beta(0) values) can be designed to have the same or opposite sign in these species, thus providing a new means to regulate the magnitude of lambda(inc)-specific dynamic hyperpolarizabilities.