Direct determination of fluoride in aluminium reduction materials by using an ion-selective electrode

Macro amounts of fluoride in aluminium reduction materials are successfully determined with a fluoride electrode. Except for anhydrous aluminium fluoride, which requires fusion with sodium hydroxide, samples are dissolved in aqueous media. Cryolite and sodium fluorosilicatc are dissolved in boiling sodium hydroxide solution. Other materials containing fluoride, such as fluorspar and the reduction cell bath and pot-lining, require dissolution in a hydrochloric acid solution of aluminium chloride. Potential interference from large amounts of aluminium (and calcium, if present) is eliminated and pH control attained by using ammoniacal sulphosalicylate (and EDTA). The procedures are reasonably rapid. Relative errors of less than 2% and a relative standard deviation of 1% are achieved.     

Determination of fluoride with thorium nitrate by catalytic titration

Amperometry, constant-current potentiometry and spectrophotometry were used to follow the course of catalytic titrations of fluoride and silicofluoride with thorium nitrate. The hydrogen peroxide-iodide system was used as the indicator reaction. Titrations were performed in 50% ethanolic acetate buffer, pH 3.6. Amounts of 3.70-6.85 mg of ammonium fluoride, 5.53-10.79 mg of potassium fluoride and 4.34-8.41 mg of sodium silicofluoride were determined with a maximum average deviation of 0.9%. The results obtained are in good agreement with those of comparable methods.     

Trace analysis in highly concentrated salt solutions of sodium chloride and ammonium fluoride using flame atomic absorption spectrometry

Summary Aqueous solutions of high salt concentration are subjected to direct flame atomic absorption analysis. Blockage of nebulizer and burner is eliminated by employing the dosage scheme washing solution — sample — washing solution effected by means of a specially designed device. The microtrace content of bismuth, zinc and copper in sodium chloride and of copper, lead and iron in ammonium fluoride is determined by the standard addition method. Matrix effects are reduced in the analysis of sodium chloride by the addition of ethanol and in the analysis of ammonium fluoride by pre-heating of sample and washing solution. In order to improve the signal-to-noise ratio, ensemble summation is applied.The following trace element concentrations are determined: 0.5 mg/kg of Cu; 5 mg/kg of Bi and 0.25 mg/kg of Zn in sodium chloride and 0.47 mg/kg of Cu; 0.1 mg/kg of Pb and 3.7 mg/kg of Fe in ammonium fluoride.

---

Bestimmung von Spurenelementen in hochkonzentrierten Salzlösungen (NaCl, NH₄F) mittels Flammen-Atom-Absorptions-Analyse

     

薄层色谱与红外光谱联用中新型固定相氟化钡的制备及应用

采用氟化钠与氯化钡反应制备了满足薄层色谱-红外光谱联用要求的氟化钡颗粒. 该方法虽然可以避免产生干扰红外光谱分析的碳酸钡杂质, 但氟化钡的产率偏低. 通过电感耦合等离子体(ICP)和X射线粉末衍射(XRD)分析证实, 氟化钠与氯化钡反应同时会生成氟氯化钡, 在沉淀洗涤过程中, 氟氯化钡的溶解会造成钡离子的流失和氟化钡产率的下降. 本文采用氟化钠溶液洗涤沉淀制备氟化钡, 可使氟氯化钡转化为氟化钡, 使氟化钡产率得到明显提高. 扫描电子显微镜和纳米粒度仪分析结果表明, 制备的氟化钡颗粒的粒径约为100 nm. 利用沉降挥发法制备了以氟化钡颗粒为固定相的薄层色谱板, 实验结果表明用该薄层色谱板可成功分离罗丹明B和孔雀石绿, 分离所得样品可被红外光谱检测且不受固定相的干扰.     

Cryolite precipitation by the Reaction of aluminium salt with sodium fluoride in aqueous solution

When aqueous solution of aluminium salt involving nitrate, chloride or sulfate was added into sodium fluoride solution, an immediate reaction occured to form cryolite-like precipitate. Examination into the resultant solution and analysis for the precipitate were carried out, leading to the fact that fluorine ion can substitute for bound water molecules around central Al⁺⁺⁺ ion, but hardly for bound hydroxide and sulfate ion which should go or be “frozen”, as it is, into cryolite-like precipitate. These ligand substitution reaction seems to contribute to identification of ion species of aluminium in aqueous solution.     

H2O+KCl(饱和)+NaCl+NH4Cl的等压研究

Isopiestic measurements have been carried out at 298.15 K for the quaternary aqueous solution H2O+KCl(sat)+NaCl+NH4Cl saturated with potassium chloride and its ternary sub systems H2O+KCl (sat)+NaCl and H2O+KCl(sat)+NH4Cl. Taking sodium chloride (aq) or calcium chloride (aq) as reference solutions, osm otic coefficients and water activities of the aqueous solution were determined. The experiment results show that the isopiestic actions of the quaternary system related to its ternary sub-systems are in excellent agreement with the ideal like solution model.     

Preconcentration of lead in biological matrices for graphite furnace atomic absorption spectrometry

Lead was transferred by a two-step extraction procedure from complicated biological matrices into an aqueous solution. Thereafter, lead could be accurately determined in the aqueous solution without interference by graphite furnace atomic absorption spectrometry (GFAAS). Biological samples were digested sequentially by a mixture of sulphuric acid and nitric acids and a strong oxidant, potassium peroxodisulphate. Lead was extracted by dithiocarbamate in chloroform from the digest solution and subsequently back-extracted into a mercury(II) solution. Matrix materials such as chloride, phosphate and sulphate, which were known to cause serious interference in the determination of lead by GFAAS, could be eliminated in the preconcentration procedure. Close to 90% recovery of lead was achieved. The proposed procedure was applied for the analysis of several NBS biological standard reference materials containing lead in the mg kg^?1 range and satisfactory results were obtained.     

Removal of strontium from an aqueous solution using co-precipitation followed by microfiltration (CPMF)

This study characterized the removal of strontium from an aqueous solution via co-precipitation followed by microfiltration (CPMF) on a lab-scale. Sodium carbonate was used as the precipitating agent. Ferric chloride was added to a settler at a dosage of 20 mg/L to improve strontium removal, and it was added to a membrane separator at a dosage of 10 mg/L to reduce membrane fouling. The concentration of strontium in the raw water used in this study was about 5 mg/L. In two intermittent tests, where dosages of sodium carbonate were 2000 mg/L and 1000 mg/L, the mean decontamination factors (DFs) were 237 and 158 and the mean concentration factors (CFs) were 288 and 462, respectively. Although the mean DF value was lower when the sodium carbonate dosage was 1000 mg/L instead of 2000 mg/L, the rate at which the specific flux (SF) of the membrane declined decreased as the amount of the effluent treated increased. The problem of strontium release at the beginning of the operation was controlled by a continuous test in which the dosage of sodium carbonate still was 1000 mg/L and the other parameters were the same as in the other tests. The results showed that the mean DF and CF were 157 and 480, respectively.     

Spectrophotometric determination of trace amounts of cadmium and zinc in waste water with 4-(2-pyridylazo)-resorcinol and mixed ionic and non-ionic surfactants

A spectrophotometric method for determination of trace amounts of cadmium and zinc in waste water with PAR and mixed ionic and non-ionic surfactants is described. The interferences of foreign ions can be eliminated by masking with a mixture of triethanolamine, potassium fluoride, ethylenediamine and sodium hexametaphosphate. By virtue of the difference between the absorbances before and after addition of a little sodium diethyldithiocarbamate, cadmium and zinc can be determined directly in aqueous solution without separation. Beer's law is obeyed for 0-20 microg of Cd or 0-12 microg of Zn in 25 ml of solution. The apparent molar absorptivities at 505 nm are 8.65 x 10(4) l.mole(-1).cm(-1) for Cd and 8.21 x 10(4) l.mole(-1).cm(-1) for Zn. Results obtained by applying the proposed method to waste-water samples agree well with those obtained by atomic-absorption spectrophotometry.     

Spectrophotometric determination of bismuth in concentrates and non-ferrous alloys by the iodide method after separations by diethyldithiocarbamate and xanthate extraction

A method for determining 0.0001-1% of bismuth in copper, molybdenum, lead, zinc and nickel sulphide concentrates is described. After sample decomposition, bismuth is separated from matrix and other elements, except lead and thallium(III), by chloroform extraction of its diethyldithiocarbamate complex, pH 11.5-12.0, from a sodium hydroxide medium containing citric acid, tartaric acid, EDTA and potassium cyanide as complexing agents. Following back-extraction of bismuth into 12M hydrochloric acid and reduction of thallium to the univalent state, bismuth is separated from co-extracted lead and thallium by chloroform extraction of its xanthate from a 2.5M hydrochloric acid-tartaric acid-ammonium chloride medium. Bismuth is then determined spectrophotometrically, at 337 or 460 nm, as the iodide. Interference from lead, which is co-extracted in mug-amounts as the xanthate and causes high results at 337 nm, is eliminated by washing the extract with a hydrochloric acid solution of the same composition as the medium used for extraction. The proposed method is also applicable to lead-, tin- and copper-base alloys.     

Distribution coefficients of vitamin B2 in hydrophilic organic solvent-aqueous salt solution systems

Distribution coefficients of vitamin B₂ in hydrophilic solvent (n-butanol, isopropanol, acetone, ethyl acetate, and their mixtures)-aqueous salt (potassium chloride, sodium fluoride, and ammonium sulfate salting-out agents) solution systems were calculated. The synergic effect and optimum proportions of components in the solvent mixture for efficient extraction of vitamin B₂ from aqueous solutions were established.     

Determination of potassium in sea-water by capillary isotachophoresis

Summary A new analytical procedure for the determination of potassium in sea-water was developed using capillary isotachophoresis and ion-exchange. After the sea-water sample was passed through the column packed with an ammonium form cation-exchange resin, sodium ion was removed with 2×10^–2 mol/l ammonium chloride solution and then potassium ion was eluted with 3×10^–1 mol/l ammonium chloride solution. Simultaneous determination of potassium and sodium ions was performed with a newly developed electrolyte system; the leading electrolyte was 5 mmol/l cesium hydroxide containing 2 mmol/l 18-crown-6, 0.01% hydroxypropyl methylcellulose (HPMC) and 70% methanol; the terminating electrolyte was 5 mmol/l tetrabutylammonium bromide containing 0.01% HPMC and 70% methanol. A large amount of ammonium in the eluate did not interfere with the isotachophoretic measurement of potassium and sodium ions. A linear working curve was obtained for artificial sea-water samples containing up to 700 mg/l potassium ion. The proposed method was applied to the determination of potassium in surface and bottom sea-water samples.

---

Kaliumbestimmung in Meereswasser durch Capillar-Isotachophorese

     

Isolation of niobium,tantalum, and titanium complex fluoride salts with alkali metal cations

Fluoride and oxofluoride salts of niobium, tantalum, and titanium were isolated. They precipitated from aqueous solutions and upon washing of organic extracts with aqueous solutions of ammonium, potassium, and sodium salts. The compositions of the isolated compounds were studied. Different compositions were established for the niobium salts that precipitated upon the dissolution of unwashed niobium hydroxide in hydrofluoric acid under the atmospheric pressure, in an autoclave, and upon addition of sodium, potassium, and ammonium salts to purely fluoride solutions of niobium, as well as for the tantalum ammonium and sodium salts isolated from aqueous and organic solutions. The data obtained can be used for the synthesis of niobium, tantalum, and titanium complex fluoride salts with various compositions.     

Electrochemical synthesis of thiocarbamates

The possibility of indirect and direct electrosyntheses of thiocarbamates is studied. The indirect synthesis is based on producing monochloramines by the chlorination of an aqueous solution containing an amine and sodium chloride on a dimensionally stable anode (DSA) in diaphragm electrolysis and a subsequent interaction of monochloramines with potassium xanthate. Optimum synthesis conditions are found ensuring a current efficiency for thiocarbamates of 43-60%. These are:c _amine = 0.17-2 M, c_NaC1 = 4 M,j_a = 20-30 A dm^-2, electrolysis temperature 10‡C, the chloramine : potassium xanthate : amine molar ratio of 1 : 1.1 : 2, and the temperature of the reaction between chloramine and potassium xanthate of 8‡C. The direct synthesis of thiocarbamates is realized in diaphragm electrolysis when oxidizing an aqueous solution containing an amine, potassium xanthate, and sodium chloride on DSA. With the electrosynthesis of ethyl ester of methylthiocarbamic acid as an example, conditions are found that allow one to obtain a target product with a current efficiency of about 44%. However, the direct synthesis is accompanied by the destruction of the anode material.     

A potentiometric multisensor system for determining lysine in aqueous solutions containing potassium and sodium chloride

A potentiometric multisensor system has been developed for the determination of lysine in aqueous solutions containing sodium and potassium chlorides. The sensor array includes a cross-sensitive sensor, the response of which is the Donnan potential at the ion-exchange polymer/test solution interface, a set of ion-selective electrodes, and a silver-silver chloride reference electrode. Multidimensional regression analysis has been employed for the calculation of component concentrations. The relative error of determining lysine, potassium, and sodium did exceed 10% in the tested solutions.     

甲酰胺与肌醇在氯化钠水溶液中的焓相互作用

应用等温流动微量热法测定298.15 K时甲酰胺与肌醇分子在不同浓度氯化钠水溶液中的混合过程焓变及其稀释焓, 根据McMillan-Mayer理论关联得到各级异系焓相互作用系数(h_xy, h_xxy及h_xyy). 结果表明, 甲酰胺与肌醇分子在氯化钠水溶液中的异系焓对相互作用系数h_xy均为负值, 并且随着氯化钠浓度的增加, h_xy的绝对值逐渐减小.     

Dithizone derivatives as sensitive water soluble chromogenic reagents for the ion chromatographic determination of inorganic and organo-mercury in aqueous matrices

Water-soluble sulfonate and the novel carboxylate analogues of dithizone, combined with ion interaction chromatography on a Dionex Acclaim 120 C18 silica column (250 x 4.6 mm id) with an eluent consisting of 10 mM tetrabutylammonium bromide and 60:40 methanol:water, have been developed as highly sensitive chromogenic ligands for the quantitative isocratic determination of inorganic and organo-mercury compounds in aqueous matrices in under 12 min. Using an optimised post column reagent system containing 0.65 mM dye, 0.5% Triton X-100 and 50 mM sodium hydroxide, good linearity (0-7.5 mg L(-1) R2 > 0.999), reproducibility using peak area measurements (RSD 0.69-1.38%, n = 8), and limits of detection (4-12 microg L(-1)) were achieved for methyl mercury, inorganic mercury and phenyl mercury.     

Solvent controlled sugar-rhodamine fluorescence sensor for Cu(2+) detection

A "turn-on" fluorescence probe for Cu(2+) detection has been reported according to a Cu(2+) triggered spirolactam ring-opening reaction. The probe is a double-responsive fluorescent and colorimetric Cu(2+)-specific sensor in aqueous solution containing 20% of acetonitrile with high selectivity and excellent sensitivity (limit of detection is 12 μg L(-1)). Furthermore, the significant color changes visible to the naked eye at the concentration of 3 μM (ca. 0.20 mg L(-1)) are about ten times lower than the WHO (World Health Organization) recommended level (2.0 mg L(-1)) for Cu(2+) ions in drinking water.     

Polyphosphate ions encapsulated in oxothiomolybdate rings: synthesis, structure, and behavior in solution

Cyclic oxothiomolybdates containing polyphosphate ions were prepared by simple reactions in aqueous medium of the corresponding polyphosphate ions and the cyclic precursor K(2)I(2)Mo(10)S(10)O(10)(OH)(10)(OH(2))(5).15H(2)O. K(5)[Cl(P(2)O(7)]Mo(12)S(12)O(12)(OH)(12)(H(2)O)(4)].22H(2)O (1) was isolated from concentrated chloride solution (2.5 mol.L(-1)). 1 reveals a remarkable complex containing two different substrates encapsulated in a dodecanuclear ring, a H-bonded Cl(-) ion, and a covalently bonded [P(2)O(7)] group. The chloride ion in 1 can be selectively removed for a monohydrogenophosphate group yielding K(6)[(HPO(4))(P(2)O(7))Mo(12)S(12)O(12)(OH)(12)(H(2)O)(2)].19H(2)O (2), a mixed species containing a [P(2)O(7)] and a [HPO(4)] group. The substitution is accompanied by a significant change of the ring, which adopts a "pear-shape" conformation. In the presence of triphosphate ion, the "heart-shaped" decanuclear ring Rb(3)[(H(2)P(3)O(10))Mo(10)S(10)O(10)(OH)(10)].17.5H(2)O (3) is formed containing a linear [P(3)O(10)] group intimately embedded in the inorganic cyclic host. The three compounds were structurally characterized by single-crystal X-ray diffraction. The behaviors of 1, 2, and 3 in solution were studied by (31)P NMR. Variable temperature experiments, supported by a two-dimensional COSY (31)P experiment, revealed that the supramolecular interaction existing between the chloride ion and the ring in solid 1 is maintained in solution. Nevertheless, 1 remains labile, and successive equilibria were evidenced and interpreted as an ion-pair association involving a halide ion (Cl, Br, or I), responsible for the conformational change of the [P(2)O(7)] group within the cavity. The influence of the nature of the halide guest (Cl(-), Br(-), and I(-)) on the successive equilibria was studied, and the thermodynamic constant related to the postulated equilibrium was determined. The stability of the supramolecular association decreases in the order Cl > Br > I. In solution, a phosphate exchange is observed for 2 while for 3 the absence of temperature dependence of the (31)P NMR spectrum confirms the conformation of the host-guest system is blocked. Elemental analysis and infrared characterizations are also supplied.     

Cobalt(III) complexes of monodentate N9-bound adeninate (ade-), [Co(ade-kappaN9)Cl(en)2]+ (en = 1,2-diaminoethane): syntheses, crystal structures, and protonation behaviors of the geometrical isomers

In acidic aqueous solution, a cobalt(III) complex containing monodentate N(9)-bound adeninate (ade(-)), cis-[Co(ade-kappaN(9))Cl(en)(2)]Cl (cis-[1]Cl), underwent protonation to the adeninate moiety without geometrical isomerization or decomposition of the Co(III) coordination sphere, and complexes of cis-[CoCl(Hade)(en)(2)]Cl(2) (cis-[2]Cl(2)) and cis-[Co(H(2)ade)Cl(en)(2)]Cl(3) (cis-[3]Cl(3)) could be isolated. The pK(a) values of the Hade and H(2)ade(+) complexes are 6.03(1) and 2.53(12), respectively, at 20 degrees C in 0.1 M aqueous NaCl. The single-crystal X-ray analyses of cis-[2]Cl(2).0.5H(2)O and cis-[3]Cl(2)(BF(4)).H(2)O revealed that protonation took place first at the adeninate N(7) and then at the N(1) atoms to form adenine tautomer (7H-Hade-kappaN(9)) and cationic adeninium (1H,7H-H(2)ade(+)-kappaN(9)) complexes, respectively. On the other hand, addition of NaOH to an aqueous solution of cis-[1]Cl afforded a mixture of geometrical isomers of the hydroxo-adeninato complex, cis- and trans-[Co(ade-kappaN(9))(OH)(en)(2)](+). The trans-isomer of chloro-adeninato complex trans-[Co(ade-kappaN(9))Cl(en)(2)]BF(4) (trans-[1]BF(4)) was synthesized by a reaction of cis-[2](BF(4))(2) and sodium methoxide in methanol. This isomer in acidic aqueous solution was also stable toward isomerization, affording the corresponding adenine tautomer and adeninium complexes (pK(a) = 5.21(1) and 2.48(9), respectively, at 20 degrees C in 0.1 M aqueous NaCl). The protonated product of trans-[Co(7H-Hade-kappaN(9))Cl(en)(2)](BF(4))(2).H(2)O (trans-[2](BF(4))(2).H(2)O) could also be characterized by X-ray analysis. Furthermore, the hydrogen-bonding interactions of the adeninate/adenine tautomer complexes cis-[1]BF(4), cis-[2](BF(4))(2), and trans-[2](BF(4))(2) with 1-cyclohexyluracil in acetonitrile-d(3) were investigated by (1)H NMR spectroscopy. The crystal structure of trans-[Co(ade)(H(2)O)(en)(2)]HPO(4).3H(2)O, which was obtained by a reaction of trans-[Co(ade)(OH)(en)(2)]BF(4) and NaH(2)PO(4), was also determined.