Reduction of dicarbonyl compounds on a DME: Part VI. A comparative study of the electrochemical behaviour of aromatic dicarbonyl compounds

Polarographic and voltammetric studies have been carried out on the reduction of benzyl and acetylbenzoyl in a basic medium.The effect of pH, reactant concentration, drop time and ethanol content on the polarographic and kinetic parameters is shown. The occurrence of adsorption phenomena is inferred from C - E curves. The degree of adsorption decreases as the ethanol content increases. Tafel slopes and reaction orders have been obtained at potentials corresponding to the foot of the wave. On the basis of these experimental data, reduction mechanisms are proposed in the zone where Tafel's law is obeyed.The results obtained here and those corresponding to the acidic medium, together with those concerning phenylglyoxal and phenylglyoxylic acid reported in the literature, are thoroughly discussed. A parallelism in the electrochemical behaviour of these compounds is made evident.     

1,3-Cyclopentanedione bis(4-methylthiosemicarbazone) monohydrochloride as a spectrophotometric reagent for the determination of lodate in acetic and perchloric acid media

1,3-Cyclopentanedione bis(4-methylthiosemicarbazone) monohydrochloride produces colored solutions with iodate ions in acid medium. The yellow color obtained has been used to proposed Spectrophotometric methods for determination of IO₃^? in the concentration range 1.0–11.0 ppm in acetic acid medium (molar absorptivity 1.08 × 10⁴ liters mol^?1 cm^?1 at a wavelength of 415 nm) and 0.5–8.0 ppm in perchloric acid medium (molar absorptivity 2.05 × 10⁴ liters mol^?1 cm^?1 at a wavelength of 400 nm).     

Spectrophotometric and analogue derivative spectrophotometric determination of ultramicro amounts of cadmium with cationic porphyrins

alpha,beta,gamma,delta-Tetrakis(1-methylpyridinium-3-yl)porphine [T(3-MPy)P] and alpha,beta,gamma,delta-tetrakis(1-methylpyridinium-4-yl)porphine [T(4-MPy)P] have been found to react rapidly with cadmium to give coloured complexes in weakly alkaline media at room temperature. Simple and practical methods for the determination of cadmium at ng/ml levels by conventional and analogue derivative spectrophotometry have been proposed. The analogue method gives higher sensitivity. T(3-MPy)P gives higher sensitivity than T(4-MPy)P. The interference of various foreign cations and anions has also been examined and in many cases eliminated or reduced. Adsorption of the porphyrins and their cadmium complexes onto the glassware, which is usually observed under the conditions of reaction and causes significant errors in the determination, can be suppressed almost completely by addition of fairly large amounts of a salt such as sodium chloride.     

Electrothermal atomic-absorption spectrophotometric determination of molybdenum

The sensitivity for determining Mo by ETA-AA is dependent on the heating programme employed when the peak-height method is used, but not when the peak area is used for evaluation of the AA signals. The linear range is greater at lower heating rate. Molybdenum can be directly determined in up to 8% NaCl solution without chemical pretreatment or background correction by making use of the high ashing temperature allowed, at which the matrix NaCl can be totally removed. The minimum recovery is 94.5%. Amounts of alkaline earth metals greater than 4000 times the amount of Mo give scatter signals, but these are time-resolved from the Mo signal. Any small effect on the peak height or area can be compensated for by background correction. The interference of tungsten is significant even at low concentrations (2-5 mug/ml) owing to the formation of stable compounds. Mo is determined in brines and acid digests of phosphate rocks after preconcentration and separation with the APDC-MIBK system, by ETA-AA of the organic extracts with or without mineralization.     

Group ib organometallic chemistry : XXXIV. Thermal behaviour and chemical reactivity of tetranuclear Me2N-substituted diarypropenylcopper-copper anion (Vi2Cu4X2) and mixed diarylpropenyl/organocopper (Vi2Cu4R2) compounds

Thermal decomposition of configurationally pure 1,2-diarylpropenylcopper compounds Z-Vi₂CU₄Br₂ and Z-Vi₂Cu₄R₂ [Vi  (2-Me₂NC₆H₄)CC(Me)-(C₆H₄Me-4), R  2-Me₂NC₆H₄ or 4-MeC₆H₄CC] predominantly results in the formation of ViH. In contrast, only dimers (ViVi) were formed on thermolysis of (Z-ViCu₂OTf)_η which is a further illustration of the influence of the counter anion on the reactivity of organocopper cluster compounds. However, in both cases partial inversion of configuration, giving mixtures of isomers, was observed. The thermolysis of (Z-ViCu₂OTf)_η is discussed in terms of OTf-enhanced intraaggregate electron-transfer processes. The formation of incipient vinyl cations which are η²-coordinated to the copper cluster can explain the observed isomerization.Also in the hydrolysis reaction of Z-Vi₂Cu₄Br₂ mixtures of isomeric ViH compounds were obtained, the E/Z ratio being dependent on the type of reagent used. Mixtures of isomeric ViX compounds (X  Br, Cl, I) were formed in the reaction of Z-Vi₂Cu₄Br₂ with I₂ and CuCl₂. An explanation for the occurrence of isomerization is presented.Dimers (ViVi) were almost absent in the product mixture resulting from the reaction of Z-Vi₂Cu₄Br₂ with CuCl₂. In contrast, ViVi is obtained in about 50% yield from the reaction of ViLi with CuCl₂ which is in accord with earlier observations for the reaction of aryllithium compounds with cupric halides.Highly selective E-ViBr formation was observed in the reaction of E-ViLi with AgBr. This reaction probably proceeds via a thermally unstable Z-ViAg₂Br intermediate.     

Reactions of organothallium compounds with olefins

Arylthallium compounds react with olefins in the presence of Li₂PdCl₄, the overall reaction being the replacement of an olefinic hydrogen by the aryl group.     

Electrochemical behaviour of iron in H2SO4 containing thiophene

The effect of thiophene on the corrosion of iron in H₂SO₄ has been studied by double-layer capacity and polarisation measurements. No change in mechanism was observed by the addition of thiophene, but a significant decrease in the rate of hydrogen evolution was observed. The inhibitor concentration was found to have a significant influence on the behaviour of the open-circuit capacitance, while the change in potential was small. The results show that thiophene is adsorbed on the iron surface according to the Temkin isotherm. The inhibitor efficiencies, as determined from current-voltage curves and the weight loss method, were consistent.     

Rapid spectrophotometric determination of cerium(IV), arsenic(III), and nitrite with perphenazine

Perphenazine dihydrochloride, PPN, is proposed as a new reagent for the spectrophotometric determination of cerium(IV), arsenic(III), and nitrite. The reagent forms a red-colored species with cerium(IV) instantaneously in 3.5–5.5 M phosphoric acid medium. The red species exhibits maximum absorbance at 516 nm. A 15-fold molar excess of PPN is necessary for the full development of the color intensity. Beer's law is obeyed over the cerium concentration range 0.4–20 ppm and Sandell's sensitivity is found to be 0.016 μg/ cm². The effects of acidity, time, order of addition of reagents, temperature, reagent concentration, and diverse ions are reported. The proposed method offers the advantages of good sensitivity, simplicity, rapidity, selectivity, and a wider range of determination without the need for heating or extraction. Arsenic(III) and nitrite are also indirectly determined. The method is extended to the determination of cerium content in synthetic mixture corresponding to misch metal.     

Double behaviour of nuclear longitudinal relaxation in solid CH4 near Tλ

The values of T₁ around the rotational ordering transition at T_λ = 20.4 K in solid CH₄ are found to change dramatically whether the sample is previously allowed to convert or not.     

The reactions of diborane with aryl-organotin compounds

A number of tetraaryltin compounds, Ar₄Sn (where Ar = phenyl, o- and p-tolyl, and p-chlorophenyl) and triphenyltin compounds, Ph₃SnX (where X = Cl, H, OH, OCOCH₃, and OCOCF₃) have been treated with diborane in tetrahydrofuran. Transmetallation occurs in which one or more aryl groups are transferred to boron. The organoboron intermediates give phenols upon oxidation and boronic and borinic acids upon hydrolysis. Pyridine complexes of organoboranes have also been isolated.     

On the behaviour of asymmetric membranes in pervaporation

Symmetric and asymmetric membranes of the Loeb type are compared with respect to their performance in pervaporation. The experiments are carried out with water—isopropanol mixtures, employing cellulose acetate membranes of different structure, but of the same total thickness. These results are compared with calculations based on a 2-layer model for asymmetric membranes. Design criteria for optimal asymmetric membranes for pervaporation, as well as the performance characteristics for the two possible modes of installation — active layer facing the feed or facing the permeate — are discussed. Contrary to reverse osmosis, the installation of the membrane with the active layer facing the permeate proves to be superior — at least for low permeabilities of the membrane material. The interdependencies between thickness and permeability of the active layer, and porosity and thickness of the support layer are much stronger than in reverse osmosis.     

A thermodynamic and spectrophotometric study of the complex formation of copper(II) ions with sulphide-containing α,ω-aminopyridines in aqueous solution

The complexation in aqueous solution of ligands of the type

(CH₂)_n?1 S(CH₂)_mNH₂ (n and m = 2 or 3) with Cu(II) has been investigated. The thermodynamic functions ΔG, ΔH and ΔS of complex formation have been determined at 25°C in 0.5 M KNO₃ solution by means of potentiometric and direct calorimetric titrations. They revealed that the ligands studied act as tridentates towards Cu(II).It was found that the CuL²⁺ complexes having one or two six-membered chelate rings are more distorted than their analogues with only five-membered chelate rings.The CuL²⁺₂ complex with L =

CH₂SCH₂CH₂NH₂ was found to be a strong covalent complex, in which both ligand molecules were completely coordinated.     

Prochlorperazine bismethanesulfonate as a new reagent for the spectrophotometric determination of palladium

A simple, rapid, and selective method for the determination of palladium is described. The orange-red palladium(II)-prochlorperazine bismethanesulfonate complex in the presence of hydrochloric acid-sodium acetate buffer exhibits maximum absorbance at 480 nm with a molar absorptivity of 4.32 × 10³ liters mol^?1 cm^?1. The sensitivity of the reaction is 24.62 ng cm^?2. The system obeys Beer's law over the concentration range 0.4–20 ppm of palladium with an optimum concentration range of 1–19 ppm. The apparent stability constant of the complex is found to be log K = 5.3 ± 0.1 at 27 °C. The effects of pH, time, temperature, order of addition of reactants, reagent concentration, and interferences from various ions are reported. The proposed method offers the opportunity to carry out the determination at room temperature without the need for an extraction step. The method is also found to be suitable for the determination of palladium in jewelry alloy.     

Extractive spectrophotometric determination of molybdenum(V) in molybdenum steels

An extraction spectrophotometric method has been developed for the determination of traces of molybdenum present in molybdenum steels which is based on the extraction of the orange-red molybdenum-thiocyanate-acetonethiosemicarbazone complex into chloroform from hydrochloric acid medium. The complex has an absorption maximum at 472 nm with a molar absorptivity of 1.9 × 10⁴ liters mol⁻¹ cm⁻¹. Beer's law is valid over the concentration range 0.1–9.5 ppm of molybdenum with an optimum concentration range of 0.4–9 ppm. The equilibrium shift method indicates 1:4:2 composition for molybdenumthiocyanate-acetonethiosemicarbazone complex. The effect of acidity, reagent concentrations, temperature, and interferences from various ions are reported.     

Solvent extraction and spectrophotometric determination of titanium(IV) with 3-phenyl-3-methyl-2-mercaptopropenoic acid

The distribution equilibria of 3-phenyl-3-methyl-2-mercaptopropenoic acid (PhMMP) and the titanium(IV)-PhMMP complex have been studied. An extraction-photometric method for the determination of microamounts of titanium has been developed. We have investigated the influence of pH, the reagent, and the presence of electrolytes and masking agents in the aqueous phase on the equilibrium. From the slope analysis of the distribution curves the composition of the extracted species has been found to be Ti(OH)₂(HR)₂. The complex is extracted quantitatively. Beer's Law is followed over the range 0.09–3.74 μg ml^?1 of titanium(IV), the molar absorptivity is 1.65 × 10⁴ liters mol^?1 cm^?1, and the Sandell sensitivity is 2.8 ng cm^?2 at 439 nm. This method has been applied to the determination of titanium in a bauxite.     

Prochlorperazine bismethanesulfonate: Sensitive and selective reagent for the spectrophotometric determination of microgram amounts of osmium

Prochlorperazine bismethanesulfonate (PCPMS) is proposed as a new sensitive and selective reagent for the spectrophotometric determination of microgram amounts of osmium. PCPMS forms a red-colored species with osmium(VIII) or osmium(VI) instantaneously at room temperature in 5 M phosphoric acid medium. The red species exhibits maximum absorbance at 529 nm. Beer's law is valid over the concentration range 0.05–3.6 ppm for osmium(VIII) and 0.15–6.4 ppm for osmium(VI). Sandell's sensitivity of the reaction is 2.89 nm cm^?2 for osmium(VIII) and 4.24 ng cm^?2 for osmium(VI). The effects of time, temperature, acidity, order of addition of reagents, reagent concentration, and diverse ions are investigated. The application of the proposed method in the determination of osmium content in synthetic ores has been explored.     

Determination of cyanide by a highly sensitive indirect spectrophotometric method

Complexation of Pd(2+) with cyanide inhibits the extraction of the palladium complex of 5-phenylazo-8-aminoquinoline. This effect is used for the indirect spectrophotometric determination of cyanide at the mug level. Cyanide in industrial waste water and in sea-water is determined after distillation as HCN from the sample and collection in sodium hydroxide solution.     

Solvent extraction and spectrophotometric determination of palladium(II) with some nitrogen-containing heterocyclic hydrazones in the presence of chloride ions

Three terdentate hydrazones, all containing the 1-phthalazino grouping in the hydrazine moiety but differing in the heterocyclic substituent in the aldehyde moiety, have been used as analytical reagents for palladium(II), the optimal conditions for the extractive spectrophotometric determination of palladium(II) in the presence of chloride ions being deduced. These compounds are highly selective and sensitive reagents for palladium(II), since they are not extracted into chloroform from sulfuric acid solutions and do not react with other platinum group metals. The desirable spectral properties of the palladium(II) complex of benzothiazole-2-aldehyde-1-phthalazinohydrazone (BAPhH) have also been discussed with respect to preference of the C  N structural form in the heterocyclic ring on the aldehyde moiety of the ligand.     

Sensitive spectrophotometric determination of La(III) with 1-(2-pyridylazo)-2-naphthol

A simple and sensitive method for spectrophotometric determination of lanthanum has been developed. At pH 9.6, in presence of 50% ethanol, lanthanum reacts with 1-(-2-pyridylazo)-2-naphthol (PAN) to form a red complex which has two absorption maxima, at 545 and 510 nm. The molar absorptivity at 545 nm is 0.55 × 10⁴ liters · mol^?1 cm^?1. On the other hand, lanthanum reacts with PAN in pure ethanol to form a red complex at 530 nm, with high molar absorptivity (8 × 10⁴ liters · mol^?1 cm^?1).