Spectrophotometric studies on the complexation equilibria of Ni and Pb with 2-carboxy-2-hydroxy-5'-sulfo-formazylbenzene. Simultaneous determination of trace amounts of Ni and Pb

Spectrophotometric studies have been made to investigate the reaction of Nickel and Lead with 2-carboxy-2'-hydroxy-5'-sulfoformazyl-benzene (zincon) in 50%(v/v) ethanol-water at 25 degrees C and an ionic strength of 0.1 M NaClO4. A complete picture of the complexation equilibria in the pH range (4.2-12.0) for nickel and (1.9-11.5) for lead are presented. Simple, rapid, selective and sensitive methods for the spectro-photometric determination of nickel and lead has been developed based on the color reaction of their complexes with zincon. The methods allow the determination of 4.69 microg mL(-1) of nickel at pH = 6.3 (lambdamax = 665 nm) and 10.3 microg ml(-1) of lead at pH = 5.6 (lambdamax = 610 nm). The apparent molar absorptivities were epsilon = 1.3 x 10(4) L mol(-1) cm(-1) for nickel and epsilon = 0.6 x 10(4) L mol(-1) cm(-1) for lead. The interference of a large number of foreign ions and complexing agents has been studied. Thiosulphate, as masking agent allows the simultaneous determination of nickel and lead in the presence of high concentrations of copper. Ascorbic acid, sodium cyanide and or sodium fluoride provide the elimination of many other interferences. The methods have been applied successfully to the simultaneous determination of nickel and lead in an aluminium and non-ferrous alloy.     

非水溶性meso-四-(4-乙酰氧基苯)卟啉的合成及其与铅显色反应的研究

目前在用水溶性卟啉衍生物作显色剂方面已有文献总结^[1]。但对非水溶性卟啉则研究得较少。就测定痕量铅而言,皆用水溶性卟啉衍生物,而用非水溶性卟啉测定铅,则尚未见报导^[2-6]。     

Anionic Lead Complexes on the Solid Phase of Fibrous Filled Materials in the Reaction with 4(2-Pyridylazo)resorcinol

The influence of the nature of anions (iodide, bromide, thiosulfate, pyrophosphate, tartrate, and acetate) in the anionic lead complex adsorbed on a solid phase of a fibrous sorbent filled with the AV-17 anion exchanger on the color reaction between lead and 4-(2-pyridylazo)resorcinol (PAR) was studied by diffuse reflectance spectrometry. The influence of anions on the complexation of lead with PAR on the solid phase was discussed for different types of the color reaction. It was demonstrated that the reactions with iodide at pH 5–10 and with thiosulfate at pH 10 are significant in the determination of lead as three-component complexes on the support. In the presence of other anions, lead ions do not react with PAR on the AV-17 solid phase.     

羧基化碳纳米管在荧光酮光度法测定铅中的应用

研究了羧基化碳纳米管(c-MWNT)存在下二溴羟基苯基荧光酮(DBH-PF)与铅离子的显色反应. 结果表明, 在pH=9.4～10.0的硼酸盐缓冲介质中, 二溴羟基苯基荧光酮和铅离子在羧基化碳纳米管的存在下能形成稳定的浅红色配合物, 最大吸收波长为558 nm, 表观摩尔吸光系数为5.62×104 L·mol-1·cm-1. 当含量在(1～50 μg)/25 mL范围内时, 满足朗伯-比尔定律.     

Spectrophotometric determination of phosphate ions with the system cerium(III)Arsenazo III

A new method for the spectrophotometric determination of PO(3-)(4), based on the conversion of the complex of cerium(III) with arsenazo III (CeH(4)R(-)) into CePO(4) is proposed and used for the indirect spectrophotometric determination of phosphorus in ferro-silicon. The reaction between Ce(III) and arsenazo III has been studied spectrophotometrically and the stability constants of the complex CeH(4)R(-) have been determined: log beta(1) = 6.42 +/- 0.10 (for pH 1-3) and log beta(1) = 6.11 +/- 0.02 (for pH 5.5-7).     

Highly Sensitive Spectrofluorimetric Determination of Trace Amounts of Indium(Ⅲ) with Salicylaldehyde Salicyloylhydrazone

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ ,ａｒｏｙｌｈｙｄｒａｚｏｎｅｓｗｈｉｃｈｃｏｎｔａｉｎｇｒｏｕｐ—ＣＯＮＨＮ ＣＨ—ｈａｖｅｂｅｅｎｔｅｓｔｅｄａｓｆｌｕｏｒｉ ｍｅｔｒｉｃｒｅａｇｅｎｔｓｆｏｒｔｈｅｄｅｔｅｒｍｉｎａｔｉｏｎｏｆａｌｕｍｉｎｕｍ ,ｇａｌｌｉｕｍ ,ｓｃａｎｄｉｕｍ ,ｚｉｎｃ ,ｃｏｐｐｅｒａｎｄｏｔｈｅｒｍｅｔａｌｉｏｎｓ[17] .Ｔｈｅｒｅａｃｔｉｏｎｏｆａｍｅｔａｌｉｏｎｗｉｔｈａｃｈｅｌａｔｉｎｇａｇｅｎｔｐｒｏｄｕｃｅｓａｒｉｇｉｄｍｏｌｅｃｕｌｅｗｉｔｈａ…     

The reaction of phenylarsenazo with chromium(III)

The conditions for the reaction between phenylarsenazo (PAA) (2-[(2-arsonophenyl)azoj-7-(phenylazo)-1, 8-dihydroxynaphthalene-3,6-disulphonic acid) and chromium(III) have been studied. A blue 1:1 complex is formed at pH 2.2 on heating the reactants at 100 degrees for 15 min. It has maximum absorption at 635 nm and is stable for at least 24 hr. The molar absorptivity is 3.3 x 10(4) 1.mole(-1).cm(-1). Beer's law is obeyed in the chromium concentration range 0-1.4 mug ml . The reaction has been successfully applied to determination of chromium in alloy steel.     

Extraction-spectrophotometric determination of iron(II) by ternary complex formation with pyrocatechol violet and cetyltrimethylammonium bromide

A method for iron(II) determination based on reaction with Pyrocatechol Violet to form a 1:2 binary complex at pH 5-7 is described and has been extended to an extraction-spectrophotometric procedure for the determination of iron(II) by formation of the 1:2:2 iron(II)-Pyrocatechol Violet-cetyltrimethylammonium bromide ternary complex. The molar absorptivities of the binary and ternary complexes at 595 and 605 nm are 6.55 x 10(4) and 1.35 x 10(5)1.mole(-1).cm(-1), respectively. The method has been successfully applied to the determination of iron in felspar, Portland cement and sodium hydroxide.     

Flow injection spectrophotometric analysis of lead in human saliva for monitoring environmental pollution

A new highly sensitive, simple and low-cost methodology for the direct determination of Pb (II) with 2-(5-bromo-2-pyridylazo)-5-dimethylaminophenol in ethanolic medium has been developed. The absorption spectroscopy of the complex has been examined in detail, and the chemical variables affecting the sensitivity of procedure studied, optimized and applied to the determination of trace amounts of lead in human saliva. Under the optimal experimental conditions, a precision of 1.61x10(-4) mug cm(-2) was achieved, the molar absorptivity being (epsilon) 5.6x10(4) l mol(-1) cm(-1). An FI technique is proposed, and it is possible to determine trace levels of lead by injection into a steam buffered at pH 7.15, containing 70% ethanol: 30% Tris buffer 3.5x10(-3) mol l(-1) (pH=7.2), 1x10(-4) mol l(-1) 5-BrDMPAP. The FIA configuration allows the analysis of 45 samples per hour. The lower limit of detection (LOD) was 1x10(-7) mol l(-1). The calibration plot was linear at least within two orders of magnitude of lead concentration. The use of an HPLC pump for the FI analysis led to a substantial improvement in the analytical performance of the method, which clearly satisfies the typical requirements for control processes.     

Determination of Lead with 4-(2-Pyridylazo)resorcinol after the Sorption of Lead as its Thiosulfate Complex on a Fibrous Sorbent Filled with AV-17

The sorption of lead from a thiosulfate solution on a fibrous material filled with AV-17 (PANF-AV-17) was studied. Lead was determined by the color reaction with 4-(2-pyridylazo)resorcinol (PAR) on the solid phase by diffuse reflectance spectrometry. Optimal conditions were selected for lead sorption (pH 4.5 ± 0.5) and determination (pH 10); the selectivity of the determination was studied. A new system Pb–thiosulfate–(PANF-AV-17)–PAR was proposed for the determination of lead on the solid phase. A procedure was developed for the determination of lead in fresh water with the detection limit 0.01 mg/L and RSD < 25%.     

Synthesis and characterization of 1,2-cyclohexanedione bis-benzoyl-hydrazone and its application to the determination of ti in minerals and rocks

The synthesis, spectroscopic characteristics and analytical applications of 1,2-cyclo-hexanedione bis-benzoylhydrazone are reported. The reaction of this new compound with titanium(IV) has been studied spectrophotomelrically. An orange 1:2 metal/ligand complex (lambda(max)= 477 nm, = 1.05 x 10(4) l.mole(-1).cm(-1)) is formed at pH 1.75-3.0 in 3:2 v v ethanol-water medium. The method is simple and selective and has been satisfactorily applied to the determination of titanium in bauxite, Portland cement, amphibolites and granites.     

Differential pulse polarographic determination of lead in complex materials after adsorption of its N-methylethylxanthocarbamate complex on microcrystalline naphthalene or on N-methylethylxanthocarbamate-benzyldimethyltetradecylammonium-naphthalene adsorbent

Lead is quantitatively adsorbed as the lead N-methylethylxanthocarbamate (MEXC)-benzyldimethyltetradecylammonium (BDTA) ion pair complex on microcrystalline naphthalene in the pH range 4.0-11.0. The metal is desorbed with HCI and determined by differential pulse polarography. Alternatively lead can be quantitatively adsorbed on the adsorbent (MEXC-BDTA-naphthalene) packed in a column at a flow rate of 1-2 mL/min and determined similarly. Dissolved oxygen is removed by adding a few milliliters of 4% NaBH4 solution. The detection limit is 0.12 microg/mL at the minimum instrumental settings (signal-to-noise ratio, 2). Linearity was obtained over the concentration range 0.3-20.0 microg/mL with a correlation factor of 0.9998 and a relative standard deviation of +/- 0.98%. Various parameters, such as the effect of pH, volume of aqueous phase, flow rate, and the interference of a large number of metal ions and anions, were studied in detail to optimize the conditions for the trace determination of lead in various standard alloys, standard biological materials, and environmental samples.     

阿莫西林与维多利亚蓝B的显色反应及应用

The color reaction of amoxicillin with victoria blue B was studied.A novel visible spectrophotometric method for the determination of amoxicillin has been established.Under pH 8.50～10.5 condition,victoria blue B reacteds with amoxicillin to form red ion association complex.The maximum absorption wavelength was at 630nm and the apparent molar absorptivity(ε) was 2.67×10~4 L·mol~(-1)·cm~(-1) and the linear ranges was 0～5.5 mg·L~(-1).Amoxicillin obey Beer's law in definite concentration range.The optimum reaction conditions and the methodological precision were studied simultaneity.The method was simple and rapid and sensitive for the determination of amoxicillin.This method has been applied to the determination of amoxicillin is in the city sell amoxicillin medicament is in point and average recovery at 98.2%～101.0%.     

2-(2-Thiazolylazo)-p-cresol(TAC) as a Reagent for the Spectrophotometric Determination of Lead(II)

Abstract

The reaction between lead(II) and 2-(2-Thiazolylazo)-p-Cresol(TAC) in the presence of TERGITOL NPX (4 mg/ml) at an apparent pH 9.0–10.0 results in an intensely colored complex which is stable for at least 4 hr.

The composition of the complex is 1:2 cation: TAC and the log of the formation constant is 11.92 ± 0. 40. Beer's law is obeyed up to 6.0μg.ml^?1 of lead(II) at 650nm.

The apparent molar absorptivity at 650 nm is 2.07 × 10⁴ 1. mole^?1.cm^?1 and the detection limit was obtained as 10.0 ng.ml^?1 of lead(II).

The method is applied to determination of lead(II) in copper-base alloy.     

Highly sensitive spectrofluorimetric determination of trace amounts of lead with a new fluorescent reagent, 2-hydroxy-1-naphthaldehydene-8-aminoquinoline

A new fluorescent reagent, 2-hydroxy-1-naphthaldehydene-8-aminoquinoline (HNAAQ), was synthesized. The fluorescent reaction of this reagent with lead was also studied. Based on this chelation, a highly sensitive spectrofluorimetric method was developed for the determination of trace amounts of lead in a water-ethanol (5 + 1, v/v) medium at pH = 9.4. Under these conditions, the Pb-HNAAQ complex has excitation and emission maxima at 398 and 450 nm, respectively. The linear range of the method is from 0 to 100 microg l(-1) and detection limit is 0.28 microg l(-1) of lead. Interference of other ions was studied. In strongly basic media most interfering metal ions form precipitates of hydroxides or oxides and can be removed efficiently through filtration while the residual cations can be removed with a cation-exchange resin. Hence, the selectivity of the method can be increased considerably. The procedure can easily be performed and affords good precision and accuracy. The method was successfully applied to the determination of lead in wheat and rice flour.     

2-(2-喹啉偶氮)-4-二乙氨基苯甲酸光度法测定烟草样品中的铜

合成了新试剂 2 - (2 -喹啉偶氮 ) - 4-二乙氨基苯甲酸 (QADEAA) ,并研究了其与铜的显色反应 ,在 p H4.5HAc- Na Ac缓冲介质中 ,乳化剂 - OP存在下 ,QADEAA 与铜反应生成 2∶ 1稳定络合物 ,λmax=565nm,ε=1 .1 2× 1 0 5L·mol-1·cm-1。铜含量在 0～ 8μg/2 5m L内符合比尔定律 ,方法可用于烟草样品中铜含量的测定。     

meso-四(4-磺酸基苯基)卟啉-铬黑T与铁(Ⅲ)混合显色反应的研究

本文研究了以铬黑T作TPPS_4和Fe(Ⅲ)的混合配位体,并在弱酸性条件下运用了铬黑T,首次突破了Fe(Ⅲ))与TPPS_4的成络反应条件:在pH4.0的HAc-NaAc缓冲溶液中,沸水浴加热15min,以1:1:1的组成形成TPPS_4-铬黑T-Fe(Ⅲ)混配络合物,λ_(max)=392um,ε＇=2.07×10~5L·mol~(-1)·cm~(-1),稳定常数为8.7×10~7,Fe(Ⅲ)含量在0～4.5μg/25ml范围内成线性关系.将此方法用于纯铜、茶叶、烟草样品中的痕量铁的测定,获得了较满意的结果.     

Spectrophotometric determination of lead in industrial, environmental, biological and soil samples using 2,5-dimercapto-1,3,4-thiadiazole

A very simple, ultra-sensitive and fairly selective non-extractive spectrophotometric method for the determination of trace amounts of lead with 2,5-dimercapto-1,3,4-thiadiazole (DMTD) has been developed. DMTD reacts in slightly acidic (0.0015-0.01 M HCl) aquatic media with lead(II) to give a greenish-yellow chelate, which has an absorption maximum at 375 nm. The reaction is instantaneous and absorbance remains stable for 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 4.93x10(4) lmol(-1)cm(-1) and 15 ngcm(-2) of Pb, respectively. Linear calibration graphs were obtained for 0.1-40 mugml(-1) of Pb; the stoichiometric composition of the chelate is 1:2 (Pb-DMTD). The interference from over 50 cations, anions and complexing agents has been studied at 1 mugml(-1) of Pb. The method developed was used successfully in the determination of lead in several standard reference materials (alloys and steels), environmental waters (potable and polluted), biological samples (human blood and urine), soil samples, solutions containing both lead(II) and lead(IV) and complex synthetic mixtures. The method has high precision and accuracy (S=+/-0.01 for 0.5 mugml(-1)).     

Spectrophotometric determination of palladium after solid-liquid extraction with 1-(2-Pyridylazo)-2-naphthol at 90 degrees C

An effective spectrophotometric determination of palladium with 1-(2-pyridylazo)-2-naphthol (PAN) using molten naphthalene as a diluent has been studied. A green complex of palladium with PAN is formed at 90 degrees C. In the range of pH 1.5-7.5, the complex is quantitatively extracted into molten naphthalene. The organic phase is anhydrously dissolved in CHCl(3) to be determined spectrophotometrically at 678 nm against the reagent blank. Beer's law is obeyed over the concentration range of 0.5-10 ppm. The molar absorptivity and Sandell's sensitivity are 1.2 x 10(4) l mol(-1) cm(-1) and 0.0070 mg cm(-2), respectively. The optimum conditions for determination are obtained. The interferences of various ions are observed in detail. The method has been applied to the determination of palladium in synthetic samples.     

Synthesis of meso-tetra-(3,5-dibromo-4-hydroxylphenyl)-porphyrin and its application to second-derivative spectrophotometric determination of lead in clinical samples

A new very sensitive and selective chromogenic reagent, meso-tetra-(3,5-dibromo-4-hydroxylphenyl)porphyrin [T(DBHP)P], was synthesized and studied for the determination of trace lead in detail. In 0.10 mol l-1 NaOH medium, lead reacts with T(DBHP)P to form a 1:2 yellow complex, which gives a maximum absorption at 479 nm; 0-0.48 microgram ml-1 Pb(II) obeyed Beer's law. The molar absorptivity of the complex and Sandell's sensitivity are 2.5 x 10(5) 1 mol-1 cm-1 and 0.000812 microgram cm-2, respectively. Second-derivative spectrophotometry is better than conventional spectrophotometry in sensitivity and selectivity, and its limit of quantification, limit of detection and relative standard deviation are 0.70 ng ml-1, 0.21 ng ml-1 and 1.0%, respectively. Ca (3250-fold), Mg (2000-fold), Sr (1000-fold), Ba (750-fold), Al (1000-fold), Bi (500-fold), Fe (2000-fold), Co (750-fold), Ni (1000-fold), Cu (750-fold), Zn (1250-fold), Cd (2500-fold) and Ag (550-fold) do not interfere with the determination of lead. The chromogenic system is remarkably superior to other reagents, especially porphyrin compounds. The influence caused by oxygen in air or in solution can be easily eliminated by adding Na2SO3. The reaction is very stable, the stability constant of the complex being 1.2 x 10(45). The chromogenic reaction is completed within 1 min at room temperature when 8-hydroxylquinoline is used as catalyst. The proposed method has been applied to the direct determination of trace lead in clinical samples. The accuracy and precision are both very satisfactory.