Extraction of uranium(VI) and thorium(IV) from nitric acid solution by N-alkylcaprolactam

Extraction of uranium(VI), thorium(IV) from nitric acid has been studied with N-octylcaprolactam and N-(2-ethyl)hexylcaprolactam. Distribution coefficients of U(VI), Th(IV) and HNO₃ as a function of aqueous NHO₃ concentration, extractant concentration and temperature have been studied. The compositions of extracted species, thermodynamic parameters of extraction have been evaluated. Third phase formation in extraction of U(VI) has been studied. Back extraction behavior of U(VI) and Th(IV) from the organic phase has also been tested. The results obtained are compared with those obtained by using TBP under the same experimental conditions.     

Zirconium(IV) Thorium(IV) and Dioxouranium(VI) Complexes of Salicylidene o-Aminobenzothiol

Salicylidene-o-aminobenzothiol and its 5-chloro and 5-bromo derivatives, dibasic tridentate Schiff bases, dervied from the condensation of o-aminothiol and Salicylaldehyde, 5-chloro salicylaldehyde and 5-bromo salicylaldehyde, were used for coordination with Zr(IV), Th(IV) and UO₂(VI) metal inos. The I:I (metal-ligand) stoichiometry of these complexes is shown by elemental analysis and conductometric titrations. Molecular structure of these complexes are proved by Infra-red spectroscopy and thermogravimetric analysis. Magnetic susceptibility measurements of Zr(IV), Th(IV) and UO₂(VI) complexes show their diamagnetic and octahedral geometry. Results show that all the complexes have solvent molecules in coordination with metal ion.     

Extraction of U(VI), Zr(IV) and Th(IV) from perchlorate media, by PC-88A

Extraction of U(VI), Zr(IV) and Th(IV) has been investigated from perchlorate media using 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A) dissolved in toluene. The extraction of U(VI), Zr(IV) and Th(IV) was found to be quantitative in the pH range 1.6 to 3.2, 2.0 to 4.7 and 2.3 to 3.8, respectively, with 3.0^.10^-3, 5.6^.10^-4 and 1.0^.10^-2M PC-88A dissolved in toluene. U(VI) was stripped with 4.0M HCl, Zr(IV) with 2.5M NaF and Th(IV) with 8.0M HCl from the metal loaded organic phase containing PC-88A dissolved in toluene. The probable extracted species have been ascertained by plotting log D vs. log [HR] as UO₂R₂ ^.2HR, ZrR₄ ^.2HR and ThR₄ ^.4HR, respectively. U(VI) was separated from Zr(IV) and Th(IV) and from other associated metals. This method was proved by the determination of U(VI) in some real samples.     

Kinetic studies on the solvent extraction of uranium (IV), thorium (IV) and uranium (VI) from nitric acid solutions with tributyl phosphate

The kinetics of solvent extraction of U (IV), Th (IV) and U (VI) from nitric acid solution with tributyl phosphate (TBP) in kerosene and cyclohexane have been studied using the single drop technique. The effects of concentrations of U (IV), Th (IV), U (VI), nitric acid, nitrate, TBP and temperature on the extraction rates of U (IV), Th (IV) and U (VI) have been examined. The mechanisms for the three extraction processes are discussed.     

Sorption of selenium(IV) and selenium(VI) onto synthetic pyrite (FeS2): spectroscopic and microscopic analyses

Pyrite was hydrothermally synthesized and used to remove Se(IV) and Se(VI) selectively from solution. Surface analyses of pyrite before and after contact with Se(IV) and Se(VI) were conducted using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and atomic force microscopy (AFM). All solid samples were acquired by allowing 3.1 mmol/L of Se(IV) or Se(VI) to react with 1 g/L of pyrite for 1, 15, or 30 days. The XPS spectra were fitted using the XPSPEAK program that applies a Gaussian Lorentzian function. The fitted spectra indicate that Se(IV) more strongly reacts with the surface-bound S than with the surface-bound Fe of pyrite. However, there is no apparent evidence of surface reaction with Se(VI). Specifically, fitted XPS spectra showed the presence of sulfide and tetrathionate on the surface, indicating that sulfur (S(2)(2-)) at the surface of pyrite can be both oxidized and reduced after contact with Se(IV). This occurs via surface disproportionation, possibly resulting in the formation of surface precipitates. Evidence for the formation of precipitates was seen in SEM and AFM images that showed rod-like particles and a phase image with higher voltage. In contrast, there were no important changes in the pyrite after contact with Se(VI) over a period of 30 days.     

An expanded set of functional groups in bis(dithiolene)tungsten(IV,VI) complexes related to the active sites of tungstoenzymes, Including WIV-SR and WVI-O(SR)

The active sites of tungstoenzymes have the formulations W(IV,V)L(S(2)pd)(2) and W(VI)LL'(S(2)pd)(2), in which two pyranopterindithiolene cofactor ligands (S(2)pd) are chelated to a tungsten atom. Ligands L and/or L' are not fully defined in any wild-type enzyme. The feasibility of various coordination fragments (functional groups) in potential bis(dithiolene)tungsten site analogues has been examined in previous work by exploratory synthesis. This investigation expands the range of accessible functional groups. The synthetic scheme originates with [W(CO)(2)(S(2)C(2)Me(2))(2)], whose carbonyl groups are labile to substitution. Complexes [W(IV,VI)LL'(S(2)C(2)Me(2))(2)](1-) are described in terms of their functional groups W(IV,VI)LL'. Reaction of the dicarbonyl with formate in acetonitrile/THF affords W(IV)(CO)(eta(1)-HCO(2)) (4) and in Me(2)SO W(VI)O(eta(1)-HCO(2)) (7) by an oxo transfer reaction. Carboxylates yield six-coordinate W(IV)(eta(2)-O(2)CR) (1-3, R = Ph, Me, Bu(t)) with C(2)(v) symmetry. Reaction of 3 (R = Bu(t)) with Me(3)SiSR (R = C(6)H(2)-2,4,6-Pr(i)(3)) gives W(IV)(SR) (5), which undergoes oxo and sulfido atom transfer to form W(VI)O(SR) (8) and W(VI)S(SR) (9), respectively. Attempts to prepare corresponding selenolate complexes, pertinent to the active site of formate dehydrogenase, were unsuccessful, including reactions of W(VI)OCl (10) with RSe(-). Structure proofs of 2-10 were obtained by X-ray structure determinations. Some 26 functional group types in bis(dithiolene)W(IV,V,VI) molecules have now been achieved by synthesis. It remains to be seen which are incorporated in an enzyme site. A number of them (e.g., 5) are directly analogous to molybdoenzyme sites, and may possess corresponding reactivity with biological substrates, as do W(IV)(OR)/W(VI)O(OR) (prepared earlier) in the reduction of N- and S-oxides by atom transfer.     

Aquomolybdenum(III) chloride as a reducing titrant A potentiometric study

The use of aquomolybdenum(III) chloride as a reducing agent for the direct potentiometric titration of Ce(IV), Cr(VI), Fe(III), V(V), Mo(VI), U(VI) and H(2)O(2) is described. The variation of the formal redox potentials of Mo(V)/Mo(IV) and Mo(IV)/Mo(III) in varying concentrations of hydrochloric, phosphoric and acetic acids is investigated. Aquomolybdenum(III) chloride is found to be a better reducing titrant than chloromolybdate(III) and gives better breaks in the titration curves. In the titration of molybdenum(VI) in 3M HCl the titration curve shows three jumps, corresponding to the reductions of Mo(VI) to Mo(V). and Mo(V) to Mo(IV) via an apparently intermediate oxidation state which presumably corresponds to a dimeric mixed-valence species. The aquomolybdenum(III) complex ion is a better reducing titrant than chloromolybdate(III) and has a wider applicability.     

Di(2-ethyl hexyl) butyramide and di(2-ethyl hexyl)isobutyramide as extractants for uranium(VI) and plutonium(IV)

The extraction of uranium(VI) and plutonium(IV) from nitric acid into n-dodecane was studied using two isomeric branched alkyl amides, di(2-ethyl hexyl) butyramide (DEHBA) and di(2-ethyl hexyl) isobutyramide (DEHIBA). The extraction ratios of Pu(IV) at relatively high acidities were higher than the corresponding values for U(VI) in the case of DEHBA. However, with DEHIBA the values for Pu(IV) were negligibly small. Pu(IV) was found to be extracted as trisolvate by DEHBA and as disolvate by DEHIBA. U(VI) was extracted by both the amides. From the study of the extraction reactions at different temperatures, it was shown that all the reactions in the present investigation were enthalpy favoured and entropy disfavoured. Separation of Pu(IV) from bulk of U(VI) was feasible. However, the purity of the separated plutonium was not satisfactory in batch extraction studies.     

Anion-exchange separation of Te(IV) from Te(VI), Se(IV) and Se(VI) on deae-cellulose in mixed hydrochloric-acetic acid media

Te(IV) can be separated from Te(VI), Se(IV) and Se(VI) by adsorption of Te(IV) on a DEAE-cellulose column from a mixed 1M hydrochloric acid-acetic acid solution (1:9, v/v). This allows a selective separation of Te (IV) from the other three species in widely different mole ratios.     

Os(II)-nitrosyl and Os(II)-dinitrogen complexes from reactions between Os(VI)-nitrido and hydroxylamines and methoxylamines

Reactions between the Os(VI)-nitrido salts (e.g., trans-[Os(VI)(tpy)(Cl)(2)(N)]PF(6) (tpy = 2,2':6',2"-terpyridine), cis-[Os(VI)(tpy)(Cl)(2)(N)]PF(6), and fac-[Os(VI)(tpm)(Cl)(2)(N)]PF(6) (tpm = tris(pyrazol-1-yl)methane)) and the hydroxylamines (e.g., H(2)NOH and MeHNOH) and the methoxylamines (e.g., H(2)NOMe and MeHNOMe) in dry MeOH at room temperature give three different types of products. They are Os(II)-dinitrogen (e.g., trans-, cis-, or fac-[Os(II)-N(2)]), Os(II)-nitrosyl [Os(II)-NO](+) (e.g., trans- or cis-[Os(II)-NO](+)), Os(IV)-hydroxyhydrazido (e.g., cis-[Os(IV)-N(H)N(Me)(OH)](+)), and Os(IV)-methoxyhydrazido (e.g., trans-/cis-[Os(IV)-N(H)N(H)(OMe)](+), and trans-/cis-[Os(IV)-N(H)N(Me)(OMe)](+)) adducts. The products depend in a subtle way on the electron content of the starting nitrido complexes, the nature of the hydroxylamines, the nature of the methoxylamines, and the reaction conditions. Their appearance can be rationalized by invoking the formation of a series of related Os(IV) adducts which are stable or decompose to give the final products by two different pathways. The first involves internal 2-electron transfer and extrusion of H(2)O, MeOH, or MeOMe to give [Os(II)-N(2)]. The second which gives [Os(II)-NO](+) appears to involve seven-coordinate Os(IV) intermediates based on the results of an (15)N-labeling study.     

An effective process for the separation of U(VI), Th(IV) from rare earth elements by using ionic liquid Cyphos IL 104

Separation and recovery of U(VI) and Th(IV) from rare earth minerals is a very challenging work in rare earth industrial production. In the present study, a homemade membrane emulsification circulation (MEC) extractor was used to separate U(VI) and Th(IV) from rare earth elements by using Cyphos IL 104 as an extractant. Batch experiments were carried out using a constant temperature oscillator to investigate the extraction parameters of the single element and the results indicated that Cyphos IL 104 could reach the extraction equilibrium within 30 min for all the three elements, i.e., U(VI), Th(IV), and Eu(III). Besides, the MEC extractor possessed a strong phase separation ability. The extraction efficiencies of U(VI), Th(IV), La(III), Eu(III) and Yb (III) increased with the increase of pH. La(III), Eu(III) and Yb(III) were hardly extracted when pH ≤ 1.50, which was beneficial for effectively separating U(VI) and Th(IV) from La(III), Eu(III) and Yb(III). In the multi-stages stripping experiments, when the stripping stage number was 3, the effective separation could be achieved by using HCl and H₂SO₄, since the stripping efficiency reached 80.0% and 100.0% for Th(IV) and U(VI), respectively. Slope method and FT-IR spectra showed that Cyphos IL 104 reacted with U(VI) and Th(IV) by chelation mechanism. The extraction of multi-elements indicated that U(VI) and Th(IV) could be well separated from the solution which contains all rare earth elements, and the extraction efficiencies of U(VI) and Th(IV) both were close to 100.0%. Based on the above experimental results, a flowchart for efficient separation of U(VI) and Th(IV) from rare earth elements was proposed.     

Adsorptive removal of U(VI) and Th(IV) from aqueous solutions using polymer-based electrospun PEO/PLLA fibrous membranes

Fibrous membranes based on poly(ethylene oxide) and poly(l-lactide) fabricated by electrospinning were evaluated for the first time as substrates for the adsorption of tetravalent thorium (Th(IV)) and hexavalent uranium (U(VI)) from aqueous media. The membranes consisted of microfibers with diameters of approximately 2 μm as revealed by scanning electron microscopy. The adsorption of Th(IV) and U(VI) on the membrane was investigated as a function of pH, ionic strength and initial metal concentration under normal atmospheric conditions. The experimental data indicated increased affinity of the membrane for Th(IV) and U(VI), which was pH depended and reaches maximum values (>90 %) for Th(IV) and U(VI) at pH 3 and pH 6.5, respectively. The maximum adsorption capacity (q _max) at optimum conditions was evaluated from the Langmuir isotherm and was found to amount 50.08 and 9.3 mmol kg^?1 for Th(IV) and U(VI), respectively. In addition, studies on the effect of ionic strength on the adsorption efficiency did not show any significant effect indicating that the adsorption of Th(IV) and U(VI) on the membrane was most probably based on specific interactions and the formation of inner-sphere surface complexes. The significantly higher adsorption efficiency of the membrane for Th(IV) in acidic media (pH ≤ 3) could be utilized for a pH-triggered, selective separation of Th(IV) from U(VI) from aqueous media.     

Reactivity of dioxoosmium(VI) porphyrins toward arylhydrazine. Isolation of hydrazidoosmium and amidoosmium porphyrins

Reactions of dioxoosmium(VI) porphyrins [Os(VI)(Por)O(2)] with excess 1,1-diphenylhydrazine in tetrahydrofuran at ca. 55 degrees C for 15 min afforded bis(hydrazido(1-))osmium(IV) porphyrins [Os(IV)(Por)(NHNPh(2))(2)] (1a, Por = TPP (meso-tetraphenylporphyrinato dianion); 1b, Por = TTP (meso-tetrakis(p-tolyl)porphyrinato dianion)), hydroxo(amido)osmium(IV) porphyrins [Os(IV)(Por)(NPh(2))(OH)] (2a, Por = TPP; 2b, Por = TTP), and bis(hydrazido(2-))osmium(VI) porphyrin [Os(VI)(Por)(NNPh(2))(2)] (3c, Por = TMP (meso-tetramesitylporphyrinato dianion)). The same reaction under harsher conditions (in refluxing tetrahydrofuran for ca. 1 h) gave a nitridoosmium(VI) porphyrin, [Os(VI)(Por)(N)(OH)] (4b, Por = TTP). Oxidation of 1a,b with bromine in dichloromethane afforded bis(hydrazido(2-)) complexes [Os(VI)(TPP)(NNPh(2))(2)] (3a) and [Os(VI)(TTP)(NNPh(2))(2)] (3b), respectively. All the new osmium porphyrins were identified by (1)H NMR, IR, and UV-vis spectroscopy and mass spectrometry; the structure of 2b was determined by X-ray crystallography (Os-NPh(2) = 1.944(6) A, Os-OH = 1.952(5) A).     

Stability of plutonium(IV) and plutonium(VI) in nitric acid solutions under strong α-irradiation

Plutonium(IV) oxidation has been studied in 1 to 20 mol/1 HNO₃ under 1 to 14 W/1 internal alpha-irradiation and at plutonium concentrations from 2 to 100 mmol/1. Curium isotopes have been used as the basic alpha-irradiation sources. It has been established that in the systems investigated both oxidation of plutonium(IV) and reduction of plutonium(VI) take place, resulting with time in reaching the equilibrium between plutonium(IV) and plutonium(VI). The presence of plutonium(IV) enhances the reduction of plutonium(VI). The rate constants for plutonium(IV) oxidation and plutonium(VI) reduction have been estimated and their dependences upon the concentrations of nitric acid, plutonium(IV) and plutonium(VI) as well as upon the dose rate investigated. An equation has been derived which permits to calculate the concentrations of plutonium(IV) and plutonium(VI) at any desired time.     

Mixed-valent uranium(IV,VI) diphosphonate: synthesis, structure, and spectroscopy

A mixed-valent uranium(IV,VI) diphosphonate, (H(3)O)(2)(UO(2))(3)U(H(2)O)(2)[CH(2)(PO(3))(2)](3)·6H(2)O (UC1P2S), has been synthesized under hydrothermal conditions. S-2-butanol was used to reduce uranium VI to IV. The tetravalent uranium centers adopt eight-coordinate geometries, while hexavalent uranyl units are all tetragonal bipyramids. The UV-vis-NIR spectrum of UC1P2S shows absorption features for both U(VI) and U(IV).     

Extraction of uranium(VI) and plutonium(IV) with some high molecular weight aliphatic monoamides from nitric acid medium

The extraction behavior of U(VI) and Pu(IV) with dioctyloctanamide (DOOA), dioctylethylhexanamide (DOEHA) and diisobutylethylhexanamide (DIBEHA) was investigated from nitric acid medium. With DOOA, U(VI) extraction is higher than that for Pu(IV) upto 5M HNO₃ and the trend is reversed at higher acid concentrations. Extraction yield of U(VI) is higher than that for Pu(IV) in the case of DOEHA and DIBEHA. DIBEHA extraction of Pu(IV) is found to be very small. The lower value of the distribution ratio for Pu(IV) with branched amides was attributed to steric reasons. The possibility of using these amides for separation of U(VI) and Pu(IV) without valency adjustment was explored. Both U(VI) and Pu(IV) are extracted as their disolvates by DOOA and DOEHA.     

Carbonate extraction-based refining of uranium. Separation of U(VI), Ce(IV), and Ln(III) from aqueous carbonate solutions with methyltrioctylammonium carbonate

The extraction of U(VI), Ce(IV), La(III), Nd(III), Sm(III), and Y(III) from an aqueous solution of Na₂CO₃ (0.25 mol/L) resulting from oxidative dissolution of U(IV) in the presence of H₂O₂ into a solution of methyltrioctylammonium carbonate (0.25 mol/L) in toluene. It was found that β_{U(VI)/Ln(III)} values vary from ~8 to 3290 as the O : W ratio changes from 2 : 1 to 10 : 1, while β_U(VI)/Ce(IV) varies from ~1.5 to 10, which allows for the extraction separation of U(VI) from Ce(IV) in a 8- to 10-stage counter-current extraction cascade and from Ln(III) in 2- to 3-stage cascade under the same conditions.     

Optimization of the reduction of Se(VI) to Se(IV) in a microwave oven

 Parameters for the reduction of Se(VI) to Se(IV) in HCl medium by heating in a microwave oven have been optimized. The reduction resulted to be quantitative applying 100% power, corresponding to 600 W heating for 2 min in 6 mol/L or for 3 min in 4 mol/L HCl. The behavior of selenomethionine and selenocystine under the optimized reduction conditions was studied in order to evaluate a possible interference of these selenium species in the determination of Se(VI). The final determination of Se(IV), and Se(VI) were done by hydride generation-atomic absorption spectrometry. The analytical merits of the method are reported. The method was applied to the selective determination of Se(IV), and Se(VI) in spiked river and lake water. Received: 6 December 1996/Revised: 1 April 1997/Accepted: 3 April 1997     

Investigation of removal of Cr(VI), Mo(VI), W(VI), V(IV), and V(V) oxy-ions from industrial waste-waters by adsorption and electrosorption at high-area carbon cloth

Adsorption and electrosorption of Cr(VI), Mo(VI), W(VI), V(IV), and V(V) ions from water samples at low concentration were studied at high-area C-cloth electrodes. The concentrations of ions in the solution were monitored using in situ UV spectroscopy. All the investigated ions, except V(IV), showed better adsorption in acidic media. Positive polarization of the C-cloth caused increased adsorption of Cr(VI), Mo(VI), and V(V) ions. When previously adsorbed, Mo(VI) and V(V) ions were shown to be largely desorbable by negative polarization of the C-cloth. Since V(IV) does not become adsorbed significantly at the C-cloth in acidic media, the method provides an interesting means for separation of V(V) and V(IV) species in solution.     

Extraction of phosphorus(V), molybdenum(VI), and tungsten(VI) from fluoride solutions

The influence of titanim(IV) and silicon(IV) on the extraction of phosphorus(V), molybdenum (VI), and tungsten(VI) fluoride complexes by tributyl phosphate was studied.