Rapid isolation of angiotensin peptides from plasma by electromembrane extraction

The present study has for the first time demonstrated the isolation of peptides from human plasma by electromembrane extraction (EME). Angiotensin 1, angiotensin 2, and angiotensin 3 migrated from 500 μL of diluted plasma, through a thin layer of 1-octanol and 8% di-(2-ethylhexyl) phosphate immobilized as a supported liquid membrane (SLM) in the pores of a porous hollow fiber, and into a 25 μL aqueous acceptor solution present inside the lumen of the fiber. The driving force for the extraction was a 15 V potential difference applied across the SLM. After only 10 min of EME, the peptides were isolated from diluted plasma (pH 3) with extraction recoveries between 25 and 43%. After optimization, the extraction system was evaluated using spiked plasma samples of angiotensin 2. The evaluation was performed by liquid chromatography electrospray mass spectrometry, showing linearity of angiotensin 2 in the range 2.5–125.0 ng/mL (r² = 0.989), and repeatability (RSD) between 5.6 and 11.6% (n = 6). The results demonstrate the possibility of isolating angiotensin peptides from plasma in only 10 min, using electromembrane extraction. The experimental findings are therefore promising with regard to future peptide extractions.     

Formic acid regeneration by electromembrane processes

Waters containing low amounts of sodium formate and sodium hydroxide were processed in order to regenerate formic acid. The treatment was performed in three steps: wastewaters neutralization, sodium formate concentration by conventional electrodialysis (ED), and sodium formate splitting into formic acid and sodium hydroxide by bipolar membrane electrodialysis (BMED). A coupling of these processes was performed. ED was carried out with a current efficiency of 90% and sodium formate concentration up to 2 mol dm⁻³. BMED was performed in a three-compartment cell configuration. Formic acid solution up to 30% was obtained with current efficiency of 80% under a current density of 500 A m⁻². Diffusion of molecular formic acid explains the current efficiency loss. The current efficiency varies with acid concentration and current density. Diffusion is more important through the anion-exchange membrane than through the bipolar membrane (2.5-fold).

Depleted salt produced in BMED was recycled to the neutralisation step.     

Exhaustive extraction of peptides by electromembrane extraction

This fundamental work illustrates for the first time the possibility of exhaustive extraction of peptides using electromembrane extraction (EME) under low system-current conditions (<50 μA). Bradykinin acetate, angiotensin II antipeptide, angiotensin II acetate, neurotensin, angiotensin I trifluoroacetate, and leu-enkephalin were extracted from 600 μL of 25 mM phosphate buffer (pH 3.5), through a supported liquid membrane (SLM) containing di-(2-ethylhexyl)-phosphate (DEHP) dissolved in an organic solvent, and into 600 μL of an acidified aqueous acceptor solution using a thin flat membrane-based EME device. Mass transfer of peptides across the SLM was enhanced by complex formation with the negatively charged DEHP. The composition of the SLM and the extraction voltage were important factors influencing recoveries and current with the EME system. 1-nonanol diluted with 2-decanone (1:1 v/v) containing 15% (v/v) DEHP was selected as a suitable SLM for exhaustive extraction of peptides under low system-current conditions. Interestingly, increasing the SLM volume from 5 to 10 μL was found to be beneficial for stable and efficient EME. The pH of the sample strongly affected the EME process, and pH 3.5 was found to be optimal. The EME efficiency was also dependent on the acceptor solution composition, and the extraction time was found to be an important element for exhaustive extraction. When EME was carried out for 25 min with an extraction voltage of 15 V, the system-current across the SLM was less than 50 μA, and extraction recoveries for the model peptides were in the range of 77–94%, with RSD values less than 10%.     

Extraction of scandium ions by new aminophosphinyl extractants

Extraction of Sc(III) ions by new aminophosphinyl compounds containing one or two methylenediorganylphosphinyl groups at the nitrogen atom was studied with a target of the development of effective and selective extractants of trace elements. The selection of extractants was due to their high hydrolytic stability in the acid media, commonly used at the extraction of metal ions in the industrial hydrometallurgical processes. The study of extraction of hydrogen chloride and nitric acids with the selected aminophosphinyl compounds allowed a discovery of substances with the low basicity, which were characterized by the low coefficient of the acids extraction. Highly effective extractants of Sc(III) were found possessing high coefficients of extraction and high degree of selectivity in the separation of Sc(III) ion from the ions of satellite metals.     

Reactions of lead cluster ions with acetone

Reactions of lead cluster cations and anions with acetone have been studied using a homemade reflectron time-of-flight mass spectrometer. Association with acetone to form Pb(k)(CH(3)COCH(3))(n)(+), high-energy pathway reactions forming Pb(k)CH(3)(+), and intraheterocluster reaction of Pb(k)(CH(3)COCH(3))(n+1)(+) to give Pb(k)CH(3)(CH(3)COCH(3))(n)(+) were the main reaction pathways for lead cluster cations with acetone. Decomposition of acetone by Pb(k)(-) to give Pb(k)C(m)(-) ions and their further association with acetone, Pb(k)C(m)(CH(3)COCH(3))(-), were the dominant reactions of lead cluster anions with acetone. Pb(7)(-), Pb(10)(-), and Pb(k)C(5)(-) were 'magic numbers' with special structural stabilityin Pb(k)(-) and Pb(k)C(m)(-), respectively. In addition, Pb(k)H(-), CH(2)COCH(3)(CH(3)COCH(3))(n)(-) and Pb(k)CH(2)COCH(3)(CH(3)COCH(3))(n)(-) were also observed in the reaction of lead cluster anions. Some reaction mechanisms are proposed for these reactions. To investigate the isotope effect for the reaction of lead cluster cations and anions with acetone and to verify the structural assignments of the observed ions, reactions of lead cluster cations and anions with deuterated acetone-d(6) were also performed.     

Reaction of lead ions with hydroxylapatite granules

In the effort to improve the performance of hydroxylapatite (HA) in removing lead ions from aqueous solutions, millimeter-sized granules with 50 % porosity were synthesized. Such HA particles, after drying at 100°C, or heating at 800°C or 1100°C, exhibited the specific surface areas of 50 m² g⁻¹, 25 m² g⁻¹, and 5 m² g⁻¹, respectively. It was found that heavy metal sorption capacity of HAs can be related to their surface area. Non-calcined granules were difficult to handle and easy to crush. Hardened granules showed heavy metal absorption on their outer surfaces. Absorption capacity of sintered HA particles towards lead was lower but adsorbed lead ions were spread inside the porous structure of HA granules more evenly. Under flow conditions, lead ions were captured by HA at a rate of 0.5 mg g⁻¹ min⁻¹. Small lead phosphate aggregates were released from the HA sorbent together with calcium ions. Size of the aggregates depended on the lead concentration and ranged from 1–50 μm in diameter; the aggregates could be removed by ultrafiltration. Results show that porous hardened HA granules can be used as an efficient phosphate source for the immobilization of lead ions from aqueous media. Organic ligands tend to interfere with the water purification procedure.     

Determination of lead in geostandard rocks by electrothermal atomic absorption spectrometry after isolation of lead with yield monitoring

Lead contents in geochemical rock standards of the Geological Survey of Japan and U.S. Geological Survey, were determined with coefficients of variation less than 5%. After dissolution of the rock by hydrofluoric and nitric acids, and spiking with ²¹²Pb, lead purified by extraction with dithizone, appropriate corrections being applied to the final results.     

板栗内皮对水溶液中镉离子和铅离子的吸附

研究了板栗内皮对水溶液中金属离子(Cd2+,Pb2+)的吸附过程,以及吸附过程中不同条件对其吸附能力的影响.通过对反应时间、温度、pH、初始金属离子浓度等因素的控制,设计不同单一变量确定在不同条件下的吸附能力,利用红外光谱确定板栗内皮上参与反应的主要基团.结果表明,板栗内皮吸附Cd2+,Pb2+理论最佳吸附条件分别为p...     

Electrocatalytic effect of metal ions on lead and lead dioxide electrode reactions

The electrochemical reactions which take place on lead and lead dioxide electrodes of a lead-acid battery are highly influenced by the presence in the electrolytic solution of ions Cd(II), Ni(II), Zn(II) and Co(II). Current density-potential curves were obtained in this work by using a Pb/Ca alloy. It was observed that Co(II) and Ni(II) ions catalyzed both hydrogen and oxygen evolution reactions. On the other hand, Cd(II) and Zn(II) ions decreased the hydrogen evolution rate.

---

, - , Cd(II), Ni(II), Zn(II) Co(II). - , Pb/Ca. , Co(II) Ni(II) , . , Cd(II) Zn(II) .

     

The interferometric investigations of electromembrane processes

The multi-frequency laser interferometric method for measuring concentration profiles under electrodialysis with ion-exchange membranes including the case of small intermembrane distances and in the presence of ion-conducting spacers is developed. Experimental results obtained by laser interferometric method are in good agreement with the mathematical models of electrodialysis. The amplitude of the concentration field oscillations is shown to increase at the current density exceeding the limiting current density, and these oscillations transfer into the state of dissipative chaos. This instability is presumably a consequence of irregularly distributed heat sources, namely, the Joule heat and the heat of dissociation and recombination of water molecules.     

Determination of lead ions using an diantipyrylmethane-based electrode

The possibility of using diantipyrylmethane as an ionophore component of a lead-selective electrode membrane was assessed. Membrane composition (wt %) was optimized: polyvinyl chloride (31.89), dioctyl sebacate (63.81), diantipyrylmethane (2.50), and oleic acid (1.80). The proposed model of the electrode works in the concentration range of 1 × 10^–5–0.1 M with a detection limit of 2 mg/L. A slope of the electrode function of the diantipyrylmethane-based electrode is 29.4 ± 0.5 mV/pPb. Concentration of Pb(II) ions in various samples was determined.     

Structures and energetics of small lead cluster ions

By a combination of gas phase ion mobility measurements and relativistic density functional theory calculations with inclusion of spin-orbit coupling, we assign structures of lead cluster cations and anions in the range between 4 and 15 atoms. We find a planar rhombus for the tetramer, a trigonal bipyramid for the pentamer, and a pentagonal bipyramid for the heptamer, independent of charge state. For the hexamer, the cation and anion structures differ: we find an octahedron for the anion while the cation consists of fused tetrahedra. For the octamer, we find in both cases structures based on the pentagonal bipyramid motif plus adatom. For the larger clusters investigated we always find different structures for cations and anions. For example, Pb(12)(-) is confirmed to be a hollow icosahedron while Pb(12)(+) is a truncated filled icosahedron. Pb(13)(+) is a filled icosahedron but Pb(13)(-) is a hollow icosahedron with the additional atom capping a face. In order to get experimental information on the relative stabilities, we investigated the collision induced dissociation mass spectra for the different cluster sizes and charge states, and observe a strong correlation with the calculated fragmentation energies. Up to n = 13 the main fragmentation channel is atom loss; for the larger cluster sizes we observe fission into two large fragments. This channel is dominant for larger anions, less pronounced but clearly present for the cations.     

Removal of lead ions in drinking water by coffee grounds as vegetable biomass

In an attempt to reuse food waste for useful purposes, we investigated the possibility of using coffee grounds to remove lead ions from drinking water. We studied the lead ion adsorption characteristics of coffee beans and grounds by measuring their fat and protein content, adsorption isotherms for lead ions, and adsorption rates for lead ions. The number of lead ions adsorbed by coffee grounds did not depend on the kind of coffee beans or the temperature at which adsorption tests were performed. The rate of lead ion adsorption by coffee grounds was directly proportional to the amount of coffee grounds added to the solution. When coffee grounds were degreased or boiled, the number of lead ions decreased. When proteins contained in coffee grounds were denatured, the lead ion adsorption was considerably reduced. The lead ion adsorption capacity of coffee grounds decreased with increased concentration of perchloric acid used for treating them and disappeared with 10% perchloric acid. The experiments demonstrated that proteins contained in coffee beans depend upon the adsorption of lead ion. The present study gave an affirmative answer to the possibility of using coffee grounds, an abundant food waste, for removing lead ions from drinking water.     

Extraction and isolation of catechins from tea

Tea is a major source of catechins, which have become well known for their antioxidant potential. Numerous human, animal, and in vitro studies have linked tea catechins with prevention of certain types of cancers, reduction of the risks for obesity, diabetes, and cardiovascular disease, and improvement of the immune system. Tea catechins are widely used in various neutraceuticals, pharmaceuticals, and cosmetics for either enhancing product shelf-life or for enhancing human health. Thus, the demand for catechins has increased considerably. Catechins have been extracted and isolated from tea leaves by numerous methods through several steps including: treatment of the tea leaves, extraction of catechins from teas into solvents, isolation of catechins from other extracted components, and drying the preparations to obtain catechin extracts in a powder form. This paper outlines the physical and chemical properties of the tea catechins and reviews the extraction steps of the various extraction methods, as a basis to improve and further develop the extraction and isolation of the tea catechins.     

Oxonium ions from aqua regia: isolation by hydrogen bonding to crown ethers

The preparation and structures of a variety of oxonium ion tetrachloroaurate(III) salts isolated from aqua regia are reported. The new compounds are [(H(5)O(2))(2)(12-crown-4)(2)][AuCl(4)](2) (1), [(H(7)O(3))(15-crown-5)][AuCl(4)] (2), [(H(5)O(2))(benzo-15-crown-5)(2)][AuCl(4)] (3), [(H(3)O)(18-crown-6)][AuCl(4)] (4), [(H(5)O(2))(dibenzo-24-crown-8)][AuCl(4)] (5), [(H(5)O(2))(4-nitrobenzo-15-crown-5)(2)][AuCl(4)] (6), [(H(3)O)(4-nitrobenzo-18-crown-6)][AuCl(4)] (7), [(H(11)O(5))(tetrachlorodibenzo-18-crown-6)(2)][AuCl(4)] (8), and [(H(7)O(3))(dinitrodibenzo-30-crown-10)][AuCl(4)] (9). A significant correlation between the degree of proton hydration and crown ether size is observed. Aryl crown ethers are nitrated in concentrated aqua regia, but nonnitrated products may be obtained in a dilute solution of aqua regia by reaction with aqueous HAuCl(4).     

A new selective fluorescent probe for lead ions

A new fluorescent probe(BPbl) for Pb~(2+) has been synthesized,where diethanolamine(receptor) is linked with 4,4-difluoro-4-bora-3a, 4a-diaza-s-indacene(BODIPY)(fluorophore) via a methylene group(spacer).The absorption(496 nm) and emission (505 nm) wavelengths are in visible range.The fluorescence quantum yields of the lead-free and lead-bound states of BPb_1 in acetonitrile are 0.013 and 0.693,respectively.The large chelation enhanced fluorescence effect(CHEF) with Pb~(2+) can be explained by the blocki...     

A highly selective fluorescent chemosensor for lead ions

A simple fluorescent chemosensor 1 exhibits a 40-fold fluorescence enhancement upon addition of lead ion and yet is insensitive to most of univalent and divalent metal ions. The high affinity of 1 toward Pb2+ presumably results from the cooperative binding behaviors of two potential metal binding sites: the dicarbonyl and the 15-monoazacrown-5 ether.     

New polymeric chemical sensors for determination of lead ions

New polymeric electrochemical sensors for determining the content of lead were suggested. As the active substance of the polymeric membranes of the sensors was used N,N′-tetrabutyldipicolinamide, the compound exhibiting a high extractive capacity for heavy metal ions. The selectivity of the sensors with respect to lead ions in the presence of copper, cadmium, and zinc in a considerable excess was studied.     

Determination of polyphosphate ions using a lead ion-selective electrode

Summary A lead ion-selective electrode responding to polyphosphate ions, such as pyro-, hexameta- and tripolyphosphate ions, has been developed and successfully used for the determination of these ions in the concentration range of 10^–6–10^–2 Min neutral solution. Almost identical potential-activity curves were obtained and the largest potential change was observed in the concentration range of 10^–6–10^–5 M (about -35 mV per decade of the concentration of each ion at pH 7.0). The response time was 1–3 min.

---

Bestimmung von Polyphosphationen mit Hilfe einer Blei-ionenselektiven Elektrode

Zusammenfassung Eine auf Polyphosphationen (Pyro-, Hexameta-, Tripolyphosphat) ansprechende Blei-ionenselektive Elektrode wurde entwickelt und mit Erfolg zur Bestimmung der genannten Ionen im Konzentrationsbereich 10^–6–10^–2 M in neutraler Lösung eingesetzt. Es wurden fast identische Potential-Aktivitäts-Kurven erhalten. Die größte Potentialänderung ergab sich im Bereich von 10^–6–10^–5 M (etwa -35 mV je Zehnerpotenz der Konzentration bei pH 7.0). Die Ansprechzeit betrug 1–3 min.