Separation behaviors of xylenol isomers by gas chromatography with helps of hydrogen bonding

Summary Xylenol isomers can be resolved on most polyols (sugars or sugar alcohols) and polyethers (polyethylene glycol or polypropylene glycol) with hydrogen-bonding interaction. They are separated on vinical polyols which have more hydroxy hydrogen than tetrol, and even on vicinal triol when its hydroxy hydrogen is acidic (stronger proton donor). The stronger is the hydrogen bonding interaction between xylenols and the liquid phase, the better is the separation of 2,4- and 2,5-xylenol, and the poorer the separation of 2,4-and 2,3-xylenol.     

Separation of xylidine isomers on heteroaromatic compounds by gas-liquid chromatography

Summary Nicotinic acid and 1H-benzotriazole appreciably resolved all the xylidine (dimethylaniline) isomers, while benzimidazole, nicotinamide and phthalimide can also separate all the isomers except 2,4- and 2,3-xylidines. The analyses were carried out on supports which were not treated with an alkali.     

Two electronic transitions in the near-UV region of six isomeric difluorobenzonitriles—I

A new technique—photoacoustic spectroscope (PAS)—is applied to the study of the electronic transitions in the six isomers 3,5-; 2,4-; 2,5-; 3,4-; 2,3-; and 2,6-difluorobenzonitriles. The PAS spectra are compared with solution spectra recorded. The two π-π* transitions analogous to the benzene strong 200 nm, and weak and forbidden 260 nm transitions could be identified in these molecules. An interesting observation is that the origins of the electronic transitions in these molecules are in fairly good agreement with the additive rule which is routed through different starting points and also a prediction of the origin of meta fluorobenzonitrile at 37,536.1 cm⁻¹ from the data of 3,4- and 2,5-difluorobenzonitriles.The fluorescence spectrum for all six isomers is reported here for the first time.     

Analysis of mixtures of glycols by ion-exchange chromatography

Procedures and results of the anion-exchange separation of diethylene glycol, ethylene glycol, 1,2-propylene glycol, the meso and the dl isomers of 2,3-butylene glycol, and glycerol are reported. This separation allows the determination of each of the six compounds present in the mixture by oxidation with dichromate.     

Synthesis of tellurobispyridines

All six isomers of tellurobispyridine, namely 2,2′-tellurobispyridine, 2,3′-tellurobispyridine, 2,4′-tellurobis-pyridine, 3,3′-tellurobispyridine, 3,4′-tellurobispyridine and 4,4′-tellurobispyridine have been synthesised.     

Phototransposition reactions of methyl-substituted benzotrifluorides: proof of the role of trifluoromethyl-substituted carbon

Irradiation in acetonitrile of any one of the six isomers of dimethylbenzotrifluoride 8 resulted in efficient photoisomerization to the others. The dominant processes in these phototransposition reactions divides the isomers into two triads. The first consists of 8-2,6 (2,6-dimethylbenzotrifluoride), 8-2,3, and 8-3,4; the second consists of 8-3,5, 8-2,4, and 8-2,5. Moreover, irradiation of 2,6-dideuterio-4-methylbenzotrifluoride 5-d(2) resulted in formation of 5,6-dideuterio-3-methylbenzotrifluoride 6-d(2). These observations demonstrate that it is the trifluoromethyl-substituted carbon that is the migratory one in these reactions.     

The phototransposition in acetonitrile and the photoaddition of 2,2, 2-trifluoroethanol to the six isomers of dimethylbenzonitrile

The six dimethylbenzonitriles can be divided into two independent triads in their photochemical reactivity. The first triad is comprised of the 2,3-dimethyl, 3,4-dimethyl, and 2,6-dimethyl isomers (11-2,3, 11-3,4, and 11-2,6, respectively); the second triad is comprised of the 2,4-dimethyl, 2,5-dimethyl, and 3,5-dimethyl isomers (11-2,4, 11-2,5, and 11-3,5, respectively). In acetonitrile, phototransposition converts the members of one triad to other members of the same triad, although only 11-3,4 was reactive enough to have significant conversion approaching a steady-state composition. Irradiation in 2,2,2-trifluoroethanol (TFE) resulted in the formation of addition products, 6-cyano-X,Y-dimethylbicyclo[3.1. 0]hex-3-en-2-yl 2,2,2,-trifluoroethyl ethers, but in significant yield only from 11-3,4 of the first triad and 11-2,4 of the second triad. The 11-3,4 isomer gave seven major regio- and stereoisomers; the 11-2,4 isomer gave three different regio- and stereoisomers. These addition products were all explained by formation of bicyclo[3. 1.0]hex-3-en-1-yl cations resulting from protonation by TFE at C6 followed by nucleophilic trapping by TFE. From these and previous results on aromatic nitriles, a consistent mechanistic picture is obtained where the critical carbon in determining the products of the phototransposition and photoaddition reactions is the cyano substituted one.     

3'甲酰基苯并冠醚的合成

本文用邻香兰醛作为起始原料,经过脱甲基反应,而制得2,3-二羟基苯甲醛,然后,在DMF中分多甘醇二对甲苯磺酸脂和氢方钠(方法A)或多醉二醇二氯化物和碳酸钾(方法B)长时间加热反应,即合成了3'-甲酰锘苯并冠醚和3',3'-和3'6'-二甲酰基二苯并冠醚.     

Experimental and computational investigation of the thermochemistry of the six isomers of dichloroaniline

The standard (p(o) = 0.1 MPa) molar enthalpies of formation of 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-dichloroanilines were derived from the standard molar energies of combustion, in oxygen, to yield CO(2)(g), N(2)(g) and HCl.600H(2)O(l), at T = 298.15 K, measured by rotating bomb combustion calorimetry. The Calvet high-temperature vacuum sublimation technique was used to measure the enthalpies of sublimation of the six isomers. These two thermodynamic parameters yielded the standard molar enthalpies of formation of the six isomers of dichloroaniline, in the gaseous phase, at T = 298.15 K. The gas-phase enthalpies of formation were also estimated by G3MP2B3 calculations, which were further extended to the computation of gas-phase acidities, proton affinities, and ionization enthalpies.     

Directed deprotonation-transmetalation as a route to substituted pyridines

Regioselective C-4 deprotonation of 3-bromopyridine, followed by Li/Zn transmetalation and Pd-mediated coupling processes, provides a flexible entry to 4-substituted and 3,4-disubstituted pyridines. Application of a similar sequence to 2-bromopyridine (with LDA as base) provides 2,3-disubstituted pyridines, but using lithium 2,2,6,6-tetramethylpiperidide (LiTMP) provides access to both the 2,3- and 2,4-disubstituted isomers.     

Atmospheric pressure chemical ionization negative mass spectra of the dinitrotoluene isomers

The atmospheric pressure chemical ionization of the dinitrotoluene isomers in ambient air was studied with a quadrupole mass spectrometer operating in the negative mode. The isomers can be grouped on the basis of the product ions: 2,5-, and 2,6- and 3,5-dinitrotoluene give the molecular anion with little fragmentation; 2,3- and the 3,4-dinitrotoluene behave similarly but with more extensive fragmentation; 2,4-dinitrotoluene gives the quasimolecular [DNT ? H]^? ion with little fragmentation. The results are discussed in terms of the molecular structure of the isomers.     

Separation of exenatide analogue mono-PEGylated with 40 kDA polyethylene glycol by cation exchange chromatography

Random PEGylation usually resulted in product mixtures composed of mono-PEGylated isomers and multi-PEGylated attachments. Generally in PEGylation research, separation of the mono-PEGylated isomers was the prerequisite for finding the optimal PEGylation site. However, when peptides or proteins were PEGylated with polyethylene glycol as large as 40 kDA, the physicochemical properties like hydrophobicity and molecular size of the isomers would become too similar to make the routine separation methods, like RP-HPLC, size-exclusion chromatography, SDS-PAGE and capillary isoelectric focusing invalid. This article presented a useful method of successfully separating exenatide analogue (an incretin for diabetic therapy) isomers mono-PEGylated with 40 kDA polyethylene glycol by cation exchange chromatography, which would be a powerful tool for the PEGylation research.     

Filling of Castable Polyurethanes with Solid Wastes from Petrochemical Production

Physicochemical properties of castable polyurethanes based on polyethylene glycol adipate and mixture of 2,4- and 2,6-toluylene diisocyanate (NCO : OH molar ratio 1.6) and filled to 10 wt % with silica gel (waste from petrochemical production) were studied.     

NMR-Untersuchungen an Dialkylsubstituierten Piperidinen–I. Konfigurationsbestimmung der 2,3-, 2,4- und 3,4-Dimethylpiperidine und die Analyse Ihrer NMR-Spektren

Mixtures of the stereoisomeric 2,3-, 2,4- and 3,4-dimethylpiperidines have been prepared by catalytic hydrogenation of the corresponding lutidines and the isomers have been separated by fractional distillation. Configurational assignments are made on the basis of the corresponding 100 and 220 MHz NMR spectra. In most cases an almost complete assignment of all protons, in the piperidine ring, was possible.     

Chromatographic separation and mass spectrometric identification of positional isomers of polyethylene glycol-modified growth hormone-releasing factor (1-29)

A one-step chromatographic method capable of separating all isomers of polyethylene glycol (PEG)-growth hormone-releasing factor (GRF) (1-29) conjugates was developed. The unmodified GRF (1-29) and seven different isomers of PEG-GRF (1-29) conjugates were separated by using a simple reversed-phase HPLC method depending on the differences of hydrophobicity due to the number and site of PEG attachment. The PEGylation sites of all isomers of PEG-GRF (1-29) conjugates were identified by determining the molecular masses of the Lys-C digested fragments with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. This study is a first report for the separation of all PEG-conjugate isomers and would be useful for further studies to find the promising conjugate by evaluating biological activity and stability of each isomer.     

侧链可降解聚硅氧烷的合成及其膜性能

以乳酸和聚乙二醇为原料,直接缩聚法制备出聚乳酸-聚乙二醇可降解嵌段共聚物,再将烯丙基缩水甘油醚和所得的嵌段共聚物在锌粉的作用下得到带有α烯基反应性官能团的大分子单体,然后在铂催化剂的作用下,合成了一种带有可降解侧链的亲水性聚硅氧烷(PDMS-g-PLA-PEG).对产物的结构、相对分子质量及其分布、热性能及成膜的表面性能等进行了研究.结果表明,由于分子链中硅氢键分布的不均匀性和聚乳酸-聚乙二醇共聚物分子量分布的不均一性,产物的分子量分布相对较宽,达到了1.87.由于聚乳酸-聚乙二醇共聚物侧链逐渐降解,所以PDMS-g-PLA-PEG所成的膜与水的接触角将随着时间的延长而逐渐增大,30天后从42°增至92°.     

The near ultraviolet absorption spectra of 2,3-, 2,4- and 2,5-dimethylbenzonitriles

A new technique—photoacoustic spectroscopy (PAS—was applied for the study of the electronic transitions in three isomers, 2,3-, 2,4- and 2,5-dimethylbenzonitriles. The PAS spectra were compared with solution and vapour phase spectra. A probable detection of S → T absorption in the molecules is considered to be of significance in the present investigation. It is also shown that two π → π* transitions analogous to the benzene strong 200 nm and weak and forbidden 260 nm transitions could be identified in all three molecules. An interesting feature is regarding the identification of a few combination bands in the excited state of an electronic transition which could be fairly comparable with such combinations observed in the near i.r. PAS spectra of the molecules, in the ground state.     

A conformational analysis of the six isomers of thiobispyridine

The conformational behaviour of the six isomers of thiobispyridine has been investigated using ab initio STO-3G*//rigid-roto, STO-3G*//STO-3G* and 6–31G**//STO-3G* molecular orbital models. The analysis reveals both the importance of optimising critical structure parameters and the basis set dependence of calculated rotational barrier heights. The most reliable model (6–31G**//STO-3G*) clearly indicates that the minimum energy conformers are not planar and that energy barriers between 30–100 kJ mol^?1 restrict inter-conversion to planar structures, thereby preventing conjugation between the p-electrons of the sulfur atom and the π system of both pyridine rings. From the calculated barrier heights, two mechanisms can be employed to explain conformer interconversion about the C? S bond: a disrotatory one-ring flip or a conrotatory two-ring flip mechanism. Where comparisons can be made (eg. 2,2′-thiobispyridine), dipole moment calculations are shown to be in good agreement with experiment. Finally, of the six isomers, appropriately substituted 2,2′, 2,3′- and 2,4′-thiobispyridines are most prone to a Smiles rearrangment.     

Capillary electrophoretic analysis of the derivatives and isomers of benzoate and phthalate

A capillary electrophoretic method for the analysis of 12 commonly found derivatives and isomers of benzoate and phthalate, including p-toluic acid, p-acetamido and p-hydroxy derivatives of benzoic acid, salicylic acid and its acetyl ester, 2- and 4-isomers of carboxybenzaldehyde, meta-, para-, and ortho-isomers of phthalic acid, and monomethyl terephthalic acid was developed. Capillary electrophoresis (CE) was performed in the free zone electrophoresis mode. Performing CE in 10 mM phosphate buffer, pH 7.0 could separate most of the benzoic acid derivatives except the structural or positional isomers. The positional isomers of phthalic acids could be completely separated with co-addition of alpha- and beta-cyclodextrins. Addition of poly(ethylene glycol) 600 (4%) could further resolve some structural isomers. The CE method developed here is rapid, i.e. complete separation could be achieved in less than 8 min for the nine monoanionic benzoate derivatives and in less than 14 min for the three dianionic phthalate isomers. The new method has good precision and linearity and can be readily applied to real samples for quantitative analysis. It is sensitive and can detect sub-ppm (w/w) level of impurity in real terephthalic samples.     

Synthesis of esters of stereoisomeric 4,5-dimethylhepta-2,4-dien-6-ynoic acids

Summary We determined the ratio of the geometric isomers of 2,3-dimethyl-2-penten-4-yn-1-al, formed in the oxidation of 2,3-dimethyl-2-penten-4-yn-1-ol and of the corresponding bromide, and we also synthesized some esters of the isomeric 3,4-dimethylhepta-2,4-dien-6-ynoic acids.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 546–548, March, 1965