o-Hydroxyacetophenone thiosemicarbazone as a reagent for the rapid spectrophotometric determination of palladium

o-Hydroxyacetophenone thiosemicarbazone has been synthesized and employed as a new reagent for the spectrophotometric determination of palladium(II), which forms two complex species with it in aqueous dimethylformamide at pH 6.0, these having 1:1 and 1:2 metal-ligand ratios. The Job and molar-ratio plots have an unusual shape that is due to the stepwise conversion of the 1:1 complex into the 1:2 species. The molar absorptivity at 370 nm is 9 x 10(3) l.mole(-1).cm(-1). Beer's law is obeyed over the range 0.42-10.6 mug/ml palladium.     

Sequential extraction and determination of copper and nickel with 2,4-dihydroxyacetophenone thiosemicarbazone

2,4-Dihydroxyacetophenone thiosemicarbazone (DAPT) forms a 1:1 complex with copper(II) which can be extracted into n-butanol or ethyl acetate from acetic acid-sodium acetate (pH 5.0) buffer, and a 1:1 nickel(II) complex which can be extracted into n-butanol from ammonium chloride-ammonia (pH 7.5) buffer. The difference between the pH(1 2 ) values for extraction of the two complexes is 3.4 and this has been exploited for their sequential extraction and determination. The molar absorptivities for the copper and nickel complexes are 1.5 x 10(4)l.mole(-1).cm(-1) at 390 nm and 8.2 x 10(3)l.mole(-1).cm(-1) at 385 nm respectively. The procedure has been applied to the analysis of cupronickel.     

Spectrophotometric determination of nickel in vegetable oil with ammonium 2-amino-1-cyclohexene-1-dithiocarboate

The reaction between nickel and ammonium 2-amino-1-cyclohexene-1-dithiocarboate in aqueous acetone medium at pH 3.0-8.0 results in a stable dark red complex. The ratio of reagent to nickel in the complex is 2:1 and the formation constant is 7.38 +/- 0.12 x 10(10). Beer's law is obeyed up to 4 microg/ml nickel at the absorption maximum at 535 nm. The apparent molar absorptivity is 2.8 x 10(4) l.mole(-1). cm(-1), and the detection limit is 10 ng/ml nickel. The method is applied to the determination of nickel in vegetable oil.     

Simultaneous spectrophotometric determination of nickel and iron in copper-base alloy with bromo-PADAP

The reaction of nickel (II) with Br-PADAP, in the presence of tergitol NPX surfactant, forms a complex with absorption peaks at 520 and 560 nm. The iron(II)-Br-PADAP system at the same conditions forms a chelate with absorption peaks at 560 and 748 nm. This allows the simultaneous spectrophotometric determination of nickel and iron by measuring the absorbance at 560 and 748 nm. The proposed method, at ph 4.0-5.7, shows a molar absorptivity of 1.22 x 10(5)l . mole(-1) . cm(-1) for nickel at 560 nm and 8.20 x 10(4)l . mole(-1) . cm(-1) at 560 nm and 3.35 x 10(4)l . mole(-1) . cm(-1) at 748 nm for iron(II). Beer's law is obeyed up to 0.40 mu/ml of nickel(II) and up to 0.65 mu/ml of iron(II). Thiosulphate as masking agent allows the simultaneous determination of iron and nickel in the presence of high concentrations of copper. The ethylene glycol 2-(2-amino-ethyl) tetracetic acid provides the elimination of many other interferences. The method has been applied successfully to the simultaneous determination of nickel and iron in reference samples.     

Spectrophotometric determination of nickel with p-acetylarsenazo

A spectrophotometric method for the determination of trace amounts of nickel is described. At pH 6, nickel reacts with p-acetylarsenazo to form a 1:2 coloured complex with an absorption maximum at 630 nm. The apparent molar absorptivity is 6.5 x 10(4) l.mol(-1) . cm(-1) . Beer's law is obeyed over the concentration range of 0-0.8 microg/ml. The proposed method is selective, sensitive and can be applied to the determination of nickel in aluminum alloy.     

Zero-crossing second derivative spectrophotometry for simultaneous determination of palladium and nickel using 1-(2-pyridylazo)-2-naphthol in mixed micellar solutions

1-(2-Pyridylazo)-2-naphthol (PAN) has been used for the simultaneous determination of nickel and palladium at trace levels. PAN complexes of nickel and palladium in the pH 1.98 form red and green colored complexes, respectively, which are soluble in aqueous 4:1 Triton X-100 to sodium dodecylsulfate (SDS) micellar media with total detergent concentration of 3.2%. Under optimum conditions, calibration graphs for the simultaneous determination by second derivative spectrophotometry were obtained. Zero crossing second derivative spectrophotometry at 668 and 572 nm, respectively for palladium and nickel was used for the simultaneous determination. The method is able to determine palladium to nickel ratio 70:1 to 1:6 (Wt/Wt), accurately. Accuracy and reproducibility of the determination method on the known various amounts of palladium and nickel in their binary mixtures were tested. Effects of diverse ions on the determination of palladium and nickel to investigate selectivity of the method also were studied.     

Highly sensitive extractive spectrophotometric determination of palladium(II) in synthetic mixtures and hydrogenation catalysts using benzildithiosemicarbazone.

A simple and highly sensitive method was developed for the extractive-spectrophotometric determination of palladium with benzilidithiosemicarbazone. The metal ion formed a reddish brown complex with benzildithiosemicarbazone in a potassium chloride-hydrochloric acid buffer of pH 2.5, which was easily extractable into methyl isobutyl ketone. The 1:1 complex showed the maximum absorbance at 395 nm with a Beer's law range of 0.25-3.5 ppm. The molar absorptivity and Sandell's sensitivity were found to be 3.018 x 10(4) dm3 mol(-1) cm(-1) and 0.0035 microg cm(-2), respectively. The correlation coefficient of the Pd(II)-BDTSC complex was 0.998, which indicated an excellent linearity between the two variables. The repeatability of the method was checked by finding the relative standard deviation (RSD) (n = 10), which was 0.46%. The instability constant of the complex calculated from Edmond and Birnbaum's method was 2.41 x 10(-5), that of Asmus' method is 2.53 x 10(-5) at room temperature. The interfering effects of various cations and anions were studied. The proposed method was successfully applied to the determination of palladium(II) in synthetic mixtures and hydrogenation catalysts. The validity of the method was tested by comparing the results with those obtained using an atomic absorption spectrophotometer.     

Highly sensitive colour-reaction of nickel with a new chromogenic reagent benzothiaxolyldiazoaminoazobenzene and its application

The synthesis of benzothiaxolyldiazoaminoazobenzene (BTDAB) is described, and a simple, rapid and sensitive procedure for spectrophotometric determination of nickel has been developed. At pH 9.4, in the presence of emulsifier p-octylpolyethyleneglycol phenylether (OP), the reagent reacts with nickel to form a red 1:3 (metal:ligand) complex. The nickel-BTDAB complex exhibit an adsorption maximum at 550 nm with an apparent molar absorptivity of 1.96 x 10(5) 1 mol(-1) cm(-1), Beer's law is obeyed for nickel in the range 0-7 mug per 25 ml. The proposed method has been applied to the determination of nickel in aluminum alloy with satisfactory results.     

Interaction of nickel with 4-(2'-benzothiazolylazo) salicylic acid (BTAS) and simultaneous first-derivative spectrophotometric determination of nickel(II) and iron(III)

The solution properties of nickel complex with 4-(2'-benzo-thiazolylazo) salicylic acid (BTAS) have been studied by zero-order absorption spectrophotometry in 40% (v/v) ethanol at 20 degrees C and an ionic strength of 0.1 mol dm(-3) (KNO(3)). The equilibria that exist in solution were established and the basic characteristics of complexes formed were determined. A new direct spectrophotometric method for the determination of trace amounts of the nickel is proposed based on the formation of the Ni (BTAS) complex at pH 7.0. The absorption maximum, molar absorbtivity, and Sandell's sensitivity of 1:1 (M:L) complex are 525 nm, 0.6 x 10(4) l mol(-1) cm(-1) and 2.824 x 10(-9) microg cm(-2), respectively. The use of first-derivative spectrophotometry eliminates the interference of iron and enables the simultaneous determination of nickel and iron using BTAS. Quantitative determination of Ni(II) and Fe(III) is possible in the range (0.59-7.08) and (2.1-8.4) microg ml(-1), respectively with a relative standard deviation of 0.5%. The proposed method has been successfully applied to the simultaneous spectrophotometric determination of nickel and iron in steel alloys and aluminum alloys.     

Analytical utility of bimetallic ternary complexes of alizarin fluorine blue Spectrophotometric determination of nickel

Mixtures of La(3+) and Ni(2+) ions form with Alizarin Fluorine Blue (1,2-dihydroxyanthraquinon-3-ylmethylamine-N,N-diacetic acid; AFB) the ternary complex (AFB)(2)La. Ni(n-) which has maximum light absorption at 550 nm ( = 1.13 x 10(4)); K(cond) = 1.9 x 10(5) lmole(-1) at pH 4.5 and 25 degrees , ionic strength = 0.1. The use of this complex for the photometric determination of nickel has been investigated.     

A rapid and sensitive extractive spectrophotometric determination of palladium(II) in synthetic mixtures and hydrogenation catalysts using pyridoxal-4-phenyl-3-thiosemicarbazone.

A rapid and sensitive extractive spectrophotometric method has been developed for the determination of palladium(II) in synthetic mixtures and hydrogenation catalysts using pyridoxal-4-phenyl-3-thiosemicarbazone (PPT) as an analytical reagent. The reagent forms a red-color complex with the metal at pH 3.0, which is extracted into benzene. The absorbance is measured at 460 nm. The method adheres to Beer's law up to a concentration range of 0.4-6.4 microg cm(-3). The molar absorptivity and Sandell's sensitivity are 2.20 x 10(4) dm3 mol(-1) cm(-1) and 4.85 x 10(-3) microg cm(-2), respectively. The correlation coefficient of the Pd(II)-PPT complex is 0.99, which indicates an excellent linearity between two variables. The detection limit of this method is 0.05 microg cm(-3). The instability constant of the Pd(II)-PPT complex calculated from Edmond and Birnbaum's method is 2.90 x 10(-5) and that of Asmus' method is 2.80 x 10(-5) at room temperature. The concurrent repetition of the method is checked and the relative standard deviation (RSD) (n = 5) was derived as 1.84 percent. The present method was applied to the determination of palladium(II) in synthetic mixtures and hydrogenation catalysts. The results were compared by employing an atomic-absorption spectrometer.     

Spectrophotometric determination of palladium after solid-liquid extraction with 1-(2-Pyridylazo)-2-naphthol at 90 degrees C

An effective spectrophotometric determination of palladium with 1-(2-pyridylazo)-2-naphthol (PAN) using molten naphthalene as a diluent has been studied. A green complex of palladium with PAN is formed at 90 degrees C. In the range of pH 1.5-7.5, the complex is quantitatively extracted into molten naphthalene. The organic phase is anhydrously dissolved in CHCl(3) to be determined spectrophotometrically at 678 nm against the reagent blank. Beer's law is obeyed over the concentration range of 0.5-10 ppm. The molar absorptivity and Sandell's sensitivity are 1.2 x 10(4) l mol(-1) cm(-1) and 0.0070 mg cm(-2), respectively. The optimum conditions for determination are obtained. The interferences of various ions are observed in detail. The method has been applied to the determination of palladium in synthetic samples.     

4-(N,N-diethylamino) benzaldehyde thiosemicarbazone in the spectrophotometric determination of palladium

4-(N,N-diethylamino)benzaldehyde thiosemicarbazone(DEABT) is proposed as a sensitive and selective analytical reagent for the spectrophotometric determination of palladium(II). The reagent reacts with palladium (II) in a potassium hydrogen phthalate-hydrochloric acid buffer of pH 3.0, to form a yellow complex. Beer's law is obeyed in the concentration range up to 3.60 microgmL(-1). The optimum concentration range for minimum photometric error as determined by Ringbom plot method is 0.36 - 3.24 microg mL(-1). The yellow Pd(II)-DEABT complex shows a maximum absorbance at 408 nm, with molar absorptivity of 3.33 x 10(4) dm3 mol(-1) cm(-1) and Sandell's sensitivity of the complex from Beer's data, for D = 0.001, is 0.0032 microg cm(-2). The composition of the Pd(II)-DEABT complex is found to be 1:2 (M:L). The interference of various cations and anions in the method were studied. The proposed method was successfully used for the determination of Pd(II) in alloys, catalysts, complexes and model mixtures with a fair degree of accuracy.     

Determination of nickel with 2-(2-quinolylazo)-5-diethylaminoaniline as a chromogenic reagent.

A sensitive, selective and rapid method for the determination of nickel based on a rapid reaction of nickel(II) with 2-(2-quinolylazo)-5-diethylaminoaniline (QADEAA) has been developed. In the presence of pH = 6.0 ammonia-ammonium chloride buffer solution and sodium dodecyl sulfonate (SDS) medium, QADEAA reacts with nickel to form a violet complex having a molar ratio of 1:2 (nickel to QADEAA). The molar absorptivity of the complex is 1.38 x 10(5) l mol(-1) cm(-1) at 595 nm. Beer's law is obeyed in the range of 0.01-0.4 microg/ml. This method had been applied to the determination of nickel with good results.     

Rapid and selective spectrophotometric determination of manganese in steels and alloys using resacetophenone oxime

A sensitive spectrophotometric method is developed for the determination of manganese in aqueous medium. The metal ion forms a yellowish brown coloured complex with resacetophenone oxime (RPO) in ammonium chloride and ammonium hydroxide buffer of pH 10.5. The 1:1 complex shows maximum absorbance at 380 nm with a Beer's law range of 0.09-1.7 ppm. The molar absorptivity and the Sandell sensitivity are found as 2.5 x 10(4) l.mole(-1).cm(-1) and 0.002 mug/cm(2), respectively. The stability constant of the complex calculated by Job's method is 7.5 x 10(5). The interfering effects of various cations and anions are studied. The present method is applied to the determination of manganese in some steel and alloy samples.     

Highly specific spectrophotometric method for palladium(II) determination with 3-(5'-tetrazolylazo)-2,6-Diaminotoluene in the presence of chlorides. Kinetic and equilibrium study of reactions

3-(5'-tetrazolylazo)-2,6-Diaminotoluene (TEADAT, H(3)L(2+)) forms stable 1:1 and 1:2 (metal:ligand) pink-red complexes (lambda(max) 506 and 536 nm) with palladium(II). The apparent molar absorptivity of 1:2 complex is 5.2 x 10(4) 1.mol(-1). cm(-1) at 536 nm. Equilibrium constants beta*(nl) for reactions PdCl(2-)(4) + nH(3)L(2+) right harpoon over left harpoonright harpoon over left harpoon PdCl(4-n) (H(2)L)(2n-2)(n) + n Cl(-) + n H(+) were determined: logbeta*(1) = 4.09 +/- 0.05, logbeta*(2) = 8.40 +/- 0.02, corresponding stability conditional constants of PdCl(3)(H(2)L) and PdCl(2)(H(2)L)(2+)(2) were log beta(1) = 19.03, log beta(2) = 26.74. The formation of complexes was rather slow but could be speeded up considerably by the catalytic effect of trace amounts of thiocyanate. Constant absorbance values were thus reached in 2-5 min. A rapid, sensitive and highly specific method for the determination of palladium(II) at pH 1.42 in 0.25M NACl has been worked out with a detection limit of 0.54 mug. Interference of precious and common metal ions have been studied and the method has been applied for the determination of palladium in Pd asbestos, oakay alloys and various catalysts and for the determination of palladium in precious metals.     

Spectrophotometric methods for determination of enalapril and timolol in bulk and in drug formulations

Two simple and accurate spectrophotometric methods for determination of timolol and enalapril maleate are described. The first method is based on chelate formation with palladium(II) chloride in buffered medium. The second method is based on the formation of the colored complex between palladium(II), eosin, and the two cited drugs using methylcellulose as surfactant to increase the solubility and intensity of the formed complexes. Under optimum conditions the complexes showed maximum absorption at 369.4 nm and 362.8 nm for timolol and enalapril maleate, respectively, in the first method and 552.2 and 550.6 nm for the second method. Apparent molar absorptivities were 1.8 x 10(3) and 1.3 x 10(3) and Sandell's sensitivities were 5.9 x 10(-4) and 2.7 x 10(-4) for timolol and enalapril maleate in the first method; in the second method molar absorptivities were 2.8 x 10(4) and 1.1 x 10(4) while Sandell's constants were 9.1 x 10(-3) and 2.3 x 10(-3) for timolol and enalapril maleate. The solutions of the complexes obeyed Beer's law in the concentration ranges 20-200 micro g mL(-1) and 50-300 micro g mL(-1) for timolol and enalapril maleate, respectively. In the second method, because the reaction was more sensitive the ranges were reduced to 1.6-16 micro g mL(-1) for timolol 8-56 micro g mL(-1) for enalapril maleate. The proposed methods were applied to the determination of the two drugs in their pharmaceutical formulation.     

Rapid and selective method for the spectrophotometric determination of nickel naphthenate in gasoline in a microemulsion

A new method for the spectrophotometric determination of nickel naphthenate in gasoline in a microemulsion was developed. PAN reacts with nickel(II) forming a red complex with composition 1:2 (metal to ligand) nickel(II)-PAN and absorption maximum at 568 nm. Nickel naphthenate in gasoline can be determined with PAN in a microemulsion, in the pH range 3.0 approximately 10.0 with a molar absorptivity of 4.8x10(4) l mol(-1) cm(-1). Beer's law was obeyed up to 0.8 mg l(-1) of nickel(II) in the microemulsion system. The interference of Cu(2+), Fe(3+), Mn(2+), Pb(2+) and Zn(2+) can be eliminated by adding 0.5 ml of a mixed masking agent. The method is rapid, simple and highly selective.     

Extraction and spectrophotometric determination of Pd(II) with 3,4,4a,5-tetrahydro-3,3,4a-trimethyl-7-(substituted)-pyrimido(1,6-a)-benzimidazole-1-thiol (PBT)

A method for the extraction-spectrophotometric determination of palladium with 3,4,4a,5-tetrahydro-3,3,4a-trimethyl-7-(substituted)-pyrimido(1,6-a)benzimidazole-1-thiol (PBT) is described. PBT-Pd(II) complex is extracted from an acidic aqueous solution (0.01-0.5M HClO(4)) into a chloroform layer. The absorbance is measured at 438 nm and the molar absorptivity found to be 1.033 x 10(4)M(-1) cm(-1). The complex system conforms to Beer's law over the range 1.9-28.5 mug/ml palladium(II). The effects of pH (2-6), HClO(4) concentration, PBT concentration and shaking time were studied. The ratio of metal ion to ligand molecules in the coloured complex was found to be 1:4. The tolerance limit for many metals have been determined. Finally, the method has been applied successfully to the determination of palladium in synthetic mixtures and in the standard palladium carbon powder (palladium catalyst).     

Analysis of metals by solid-liquid separation after liquid-liquid extraction spectrophotometric determination of palladium(II) by extraction of palladium dimethylglyoximate with melted naphthalene

A method of liquid-liquid extraction of palladium di-methylglyoximate with molten naphthalene followed by solid-liquid separation is successfully applied to palladium. The complex between palladium and dimethylglyoxime is easily extracted into molten naphthalene. After extraction, the very fine solidified naphthalene crystals are dissolved in chloroform, and the absorbance of the resultant solution is measured at 370 nm against a reagent blank. Beer's law is obeyed for 30-370 mug of palladium in 10 ml of chloroform, and the molar absorptivity is calculated to be 1.72 x 10(4) l.mole.(-1)mm(-1). Various alkali metal salts and metal ions do not interfere. The interference of nickel(II) is overcome by the extraction at pH 2, and that of iron(III) by masking with EDTA or by reduction to iron(II). The method is rapid and accurate.