Microwave-treated layered double hydroxides containing Ni and Al: The effect of added Zn

Ni containing layered double hydroxides (LDHs) have been prepared by precipitation and hydrothermally treated under microwave irradiation for different periods of time. The solids have been calcined at three temperatures corresponding to stable phases formed during thermal decomposition of LDHs. The properties of the irradiated samples and of the calcined products were studied in order to ascertain whether the ageing treatment under microwave irradiation modifies not only the properties of the layered materials, but also the properties of the calcined products. A structural and textural study was carried out by PXRD, FT-IR and Vis-UV spectroscopy, thermal analyses (DTA and TG), N₂ adsorption/desorption at −196 °C and TEM microscopy; the reducibility of the nickel species was studied as well by TPR. The results show that the microwave treatment leads to better crystallized LDHs with modified thermal stability and reducibility. In addition, the degree of crystallinity of the layered precursors and their textural properties determine the properties of their thermal decomposition products.     

Thermally Induced Growth of ZnO Nanocrystals on Mixed Metal Oxide Surfaces

An in situ method for the growth of ZnO nanocrystals on Zn/Al mixed metal oxide (MMO) surfaces is presented. The key to this method is the thermal treatment of Zn/Al layered double hydroxides (Zn/Al LDHs) in the presence of nitrate anions, which results in partial demixing of the LDH/MMO structure and the subsequent crystallization of ZnO crystals on the surface of the forming MMO layers. In a first experimental series, thermal treatment of Zn/Al LDHs with different fractions of nitrate and carbonate in the interlayer space was examined by thermogravimetry coupled with mass spectrometry (TG‐MS) and in situ XRD. In a second experimental series, Zn/Al LDHs with only carbonate in the interlayer space were thermally treated in the presence of different amounts of an external nitrate source (NH₄NO₃). All obtained Zn/Al MMO samples were analysed by electron microscopy, nitrogen physisorption and powder X‐ray diffraction. The gas phase formed during nitrate decomposition turned out to be responsible for the formation of crystalline ZnO nanoparticles. Accordingly, both interlayer nitrate and the presence of ammonium nitrate led to the formation of supported ZnO nanocrystals with mean diameters between 100 and 400 nm, and both methods offer the possibility to tailor the amount and size of the ZnO crystals by means of the amount of nitrate.     

Comparison on Thermal Decomposition of Propionate,Benzoate and Their Chloroderivative Salts of Zn(II)

The thermal decompositions of propionates, benzoates Zn(II), their chloroderivate and complexes with thiourea have been studied by the means of TG, DTG, DTA, IR and XRD-powder diffraction methods. The investigated decompositions are compared and the results are presented in this report. The results showed different features of thermal decomposition of Zn(II) halogenpropionate and halogenbenzoate. In the case of Zn(II) halogenpropionate the presence of halogen effects different features of thermal decomposition and changes character of the final products. In the case of halogenbenzoate Zn(II) the halogen does not influence neither the character of decomposition nor the character of final products. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal study of zinc(II) 4-chlorosalicylate complex compounds with bioactive ligands

Three new complex compounds of general formula Zn{4-ClC₆H₃-2-(OH)COO}₂⋅L₂⋅nH₂O (where L=thiourea (tu), nicotinamide (nam), caffeine (caf), n=2,3), were prepared and characterized by chemical analysis, IR spectroscopy and their thermal properties were studied by TG/DTG, DTA methods. It was found that the thermal decomposition of hydrated compounds starts with the release of water molecules. During the thermal decomposition of anhydrous compounds the release of organic ligands take place followed by the decomposition of salicylate anion. Zinc oxide was found as the final product of the thermal decomposition performed up to 650°C. RTG powder diffraction method, IR spectra and chemical analysis were used for the determination of products of the thermal decomposition.     

Thermal study of zinc(II) salicylate complex compounds with bioactive ligands

Five new complex compounds of general formula Zn(Hsal)_2·L₂·nH₂O (where Hsal=OHC₆H₄COO^-, L=thiourea (tu), nicotinamide (nam), caffeine (caf), theobromine (tbr), n=2-4), were prepared and characterized by chemical analysis, IR spectroscopy and studied by methods of thermal analysis (TG/DTG, DTA). It was found that the thermal decomposition of hydrated compounds starts with the release of water molecules. During the thermal decomposition of anhydrous compounds the release of organic ligands take place followed by the decomposition of salicylate anion. Zinc oxide was found as the final product of the thermal decomposition heated up to 800°C. RTG powder diffraction method, IR spectra and chemical analysis were used for the determination of products of the thermal decomposition. This revised version was published online in August 2006 with corrections to the Cover Date.     

二元类水滑石层板组成、结构与性能的理论研究

采用晶体学理论建立二元类水滑石(LDHs)微观结构模型与静电势能模型，将层板金属离子间距、层板电荷密度、层间阴离子间距等微观结构参数定量化，并将层间阴离子的静电势能表示成层板金属离子半径和物质的量之比、插层阴离子尺寸和电荷的函数。研究结果表明：LDHs层板金属离子间距应用离子紧密堆积来估算和孔径按阴离子平面六方点阵分布来计算是可行的；调变层板金属离子种类与物质的量之比影响层间阴离子的稳定性，势能计算值与文献报道的LDHs热稳定性次序一致。所以该模型可用于预测LDHs的微观结构参数以及热稳定性，为新型层状双羟基材料的定向合成提供思路。     

Structural characterization and thermal decomposition of layered double hydroxide/poly(p-dioxanone) nanocomposites

Nanocomposites based on layered double hydroxides (LDH) and poly(p-dioxanone) (PPDO) were prepared by melt processing using dodecylbenzene sulfonate (DBS) and 4-hydroxybenzene sulfonate (HBS) as organic modifiers. The incorporation of organic anions in LDH was demonstrated by wide-angle X-ray scattering (WAXS) and Fourier transform infrared (FTIR). The dispersion degree of the organically modified LDHs in the PPDO matrix was analyzed by WAXS, indicating that only the LDH modified with HBS was exfoliated. The effect of the organically modified LDHs on the thermal stability of PPDO was studied using thermogravimetric analysis (TGA). The thermal stability of PPDO matrix was enhanced by the incorporation of the LDH modified with HBS due to the shielding effect of the exfoliated layers. In contrast, the LDH modified with DBS produced a decrease of the thermal stability of PPDO, probably due to hydrolytic decomposition of ester group. The thermogravimetric analysis also showed that the organo-modified LDH did not modify the thermal decomposition mechanism of the polymer, but had an effect on the thermal stability.     

Thermal behaviour of 6-(2-pyridylazo)-3-acetamidophenol and its metal complexes

The present work aims chiefly to study the thermal behaviour of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) complexes with 6-(2-pyridylazo)-3-acetamidophenol (PAAP) in nitrogen atmosphere. The moieties of the prepared complexes contain mainly coordinated water molecules (1-3) together with some water of crystallization. The water molecules of crystallization are removed in a single stage. The decomposition and combustion of the fragments occur in the second and subsequent stages. The fragmentation of the prepared complexes is also studied by mass spectrometry in order to identify the molecular ions obtained. The comparison of thermal analysis (TG) and mass spectra of the compounds is helpful in checking the correct proposed thermal decomposition schemes. This comparative study shows that mass spectra are correlated with the thermal analyses suggestions. The activation thermodynamic parameters of thermal decomposition pathways, such as energy of activation, enthalpy, entropy and free energy change of the complexes are evaluated and the stability of the thermal treated complexes is discussed, which shows that the thermal stabilities of the complexes are enhanced as the ionic radii decrease.     

Synthesis and characterization of new Mg(2)Al-paratungstate layered double hydroxides

Layered double hydroxides (LDHs, or hydrotalcites) with Mg(2+) and Al(3+) cations in the mixed metal hydroxide layer and paratungstate anions in the interlayer have been prepared. Different methods have been followed: anion exchange with Mg,Al LDHs originally containing nitrate or adipate, reconstruction of the LDH structure from a mildly calcined Mg(2)Al-CO(3) LDH, and coprecipitation. In all cases, the tungsten precursor salt was (NH(4))(10)H(2)W(12)O(42). The prepared solids have been characterized by elemental chemical analysis, powder X-ray diffraction (PXRD), FT-IR spectroscopy, thermogravimetric (TG) and differential thermal (DTA) analyses, scanning electron microscopy (SEM) with EDX (energy-dispersive X-ray analysis), and nitrogen adsorption at -196 degrees C for surface area and surface texture. Most of the synthesis methods used, especially anion exchange starting from a Mg(2)Al-NO(3) precursor at low temperature and short reaction times, lead to formation of a hydrotalcite with a gallery height of 9.8 A; increasing the reaction temperature to 70-100 degrees C and maintaining short contact times leads to a solid with a gallery height of 7.8 A. Both phases have been identified as a result of the intercalation of W(7)O(24)(6)(-) species in different orientations in the interlayer space. If the time of synthesis or the temperature is increased, a more stable phase, with a gallery height of 5.2 A corresponding to a solid with intercalated W(7)O(24)(6)(-), is formed, probably with grafting of the interlayer anion on the brucite-like layers. All systems are microporous. Calcination at 300 degrees C leads to amorphous species, and crystallized MgWO(4) is observed at 700 degrees C.     

Thermal and photocatalytic behavior of Ti/LDH nanocomposites

The development of nanocomposite photocatalyst based on layered double hydroxides (LDHs) associated with TiO₂ was the subject of this research. The thermally activated Zn–Al LDHs were selected as catalyst support precursor because of their proven photocatalytic activity and therefore their possible contribution to overall activity of novel Ti–Zn–Al nanocomposite. The catalyst precursor (Zn–Al LDH) was synthesized by low supersaturation coprecipitation method, and its association with active TiO₂ component targeting the formation of novel Ti–Zn–Al nanocomposite was achieved by wet impregnation. Simultaneous thermal analysis (TG–DTA) was used to investigate the thermal behavior of Zn–Al LDH and Ti–Zn–Al LDHs. Complementary, morphology, texture, and structure characterization was carried out. The photocatalytic test reaction was performed under UV light using the methylene blue degradation. The results confirmed a successful impregnation of TiO₂ on catalyst support precursor Zn–Al–LDH followed by considerable change in morphology and structure of Zn–Al LDH precursor. It was concluded that the synergic effect between TiO₂ and Zn–Al LDH precursor contributes to the overall photocatalytic activity.     

Spectral,BVS, and Thermal Studies on Bisdithiocarbamates of Divalent Zn,Cd, and Their Adducts: Single Crystal X-Ray Structure Redetermination of (Diiodo) (Tetraethylthiuramdisulfide)mercury(II), [Hg(tetds)I2]

The current article describes the TG and DT analyses of divalent Zn, Cd, and Hg dithiocarbamato (dtc) complexes and their adducts (dchdtc = N,N-dicyclohexyldithiocarbamate anion, 4-mpzdtc = 4-methylpiperazinecarbodithioato anion, padtc = N,N′-(iminodiethylene)bisphthalimidedithiocarbamate anion, pipdtc = piperidinecarbodithioate anion, 1,10-phen = 1,10-phenanthroline, and 2,2′-bipy = 2,2′-bipyridine) along with the structural reinvestigation of [Hg(tetds)I ₂ ], where tetds = tetraethylthiuramdisulfide. In the case of Zn(II) and Cd(II) dithiocarbamates and their nitrogenous adducts, thermal decomposition of the nitrogenous bases is followed by the decay of dithiocarbamate leading to the formation of ZnS or CdS as residue. The interaction of iodine with [Hg(dedtc) ₂ ] in CHCl ₃ results in the oxidation of diethyldithiocarbamate leading to the formation of [Hg(tetds)I ₂ ], and the structure was redetermined because the earlier determination was by a Polaroid crystallographic technique with a higher R value. The S-Hg-I bond angles [105.09(3); 105.59(3); 109.26(3), and 100.99(3)°] indicate the near tetrahedral environment around the metal ion. ¹ H and ¹³ C NMR spectra of the complex were analyzed. Whether the product formed upon oxidation is a disulfide or an iodo-substituted product, in the present investigation, is clearly decided by the bulkiness of the substituent attached to the nitrogen. Interestingly, the steric influence is a deciding factor only in the case of mercury compounds and the dithiocarbamates involving Zn, Cd forms of the disulfide complexes.     

Preparation,spectral, thermal,and biological properties of zinc(II) 4-chloro- and 5-chlorosalicylate complexes with methyl 3-pyridylcarbamate and phenazone

New zinc(II) 4-chloro- and 5-chlorosalicylate complex compounds of the general formula ((4- or 5-Cl)C₆H₃(2-OH)COO)₂Zn · L _n (where L = methyl 3-pyridylcarbamate, phenazone; n = 2, 4) were prepared and characterized by elemental analysis, thermal analysis (TG/DTG, DTA), and IR spectroscopy. During thermal decomposition, mpc, phen, chlorosalicylic acid, chlorophenol, carbon dioxide, and carbon monoxide were released. Volatile products of the thermal decomposition were confirmed by mass spectrometry. The final solid product of the thermal decomposition up to 700°C was zinc oxide or metallic zinc. Antimicrobial activity of the compounds prepared was tested against various strains of bacteria, yeasts and filamentous fungi. The highest antimicrobial effect was determined against the G⁺ bacteria S. aureus.     

Thermal stability and fire retardancy of PMMA (nano)composites with layered metal hydroxides containing dodecyl sulfate anions

Layered double hydroxides (LDHs) with Mg/Al, Zn/Al, Ca/Al metal hydroxide layers, and a Zn/Ni hydroxy double salt (HDS) were prepared with a common anion, dodecyl sulfate [CH₃(CH₂)₁₀COO^?, DS]. The LDH and HDS additives were melt blended with poly(methyl methacrylate) (PMMA). The dispersion and morphology were characterized via X‐ray diffraction (XRD) and transmission electron microscopy. Mg/Al‐DS and Zn/Al‐DS LDHs were found to form nanocomposites with PMMA, exhibiting good dispersion and some degree of exfoliated morphology for the Zn/Al‐DS/PMMA combination and mixed intercalation and exfoliation behavior for Mg/Al‐DS in PMMA. The Ca/Al‐DS LDH and Zn/Ni‐DS HDS formed microcomposites with PMMA. Thermal stability was investigated via thermogravimetric analysis; each of the additives increased the thermal stability of PMMA. Cone calorimetry was used to measure the fire properties; the microcomposite of Zn/Ni‐DS HDS at 10% loading provided the best improvement in peak heat release rate, with a 40% reduction over the pure polymer. The residue composition after burning the composites was investigated. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation,thermal decomposition,and crystal structure of Zn(II) 2-chlorobenzoate complex with nicotinamide

A new Zn(II) 2-chlorobenzoate complex, [Zn(2-ClC₆H₄COO)₂(nad)₂] (nad = nicotinamide), was synthesized and characterized by elemental analysis, infrared (IR) spectroscopy, mass spectrometry, thermal analysis, and X-ray structure determination. The mechanism of thermal decomposition of the complex was studied by TG/DTG, DTA, IR spectroscopy, and mass spectrometry. The thermal decomposition is characterized as a two-step process. Zinc oxide was found as the final product of the thermal decomposition performed up to 900°C. Mass spectrometry was used to determine the volatiles released during thermal decomposition. The IR spectrum indicates that carboxylate is coordinated to zinc in monodentate coordination. [Zn(2-ClC₆H₄COO)₂(nad)₂] crystallizes in the monoclinic system, space group Pn, a = 10.376(2) Å, b = 10.100(1) Å, c = 12.604(1) Å, β = 100.79(1)°. The zinc is tetrahedrally coordinated by two nitrogens of nicotinamide and two oxygens of 2-chlorobenzoate.     

酸性橙插层锌铝水滑石的组装及其结构与性能

采用共沉淀法合成酸性橙阴离子插层锌铝水滑石(Zn/Al-AO7 LDHs),研究不同pH值及原料金属离子配比对产物结构的影响,利用X射线粉末衍射(XRD),热分析(TG-DTA),傅里叶变换红外(FT-IR)等表征手段,对插层产物的结构进行表征,确定了制备酸性橙插层锌铝水滑石的最适宜条件.用量子化学的B3PW91/6-31G(d,p)方法对Zn/Al-AO7 LDHs模型分子的空间几何构型进行了优化,通过结构组合得到的层间距为2.33 nm,接近XRD测试得到的层间距,从而说明了酸性橙离子在水滑石层板间的排列方式.进一步以甲酰胺为溶剂对水滑石层板进行剥离,得到澄清溶液,根据剥离产物的XRD谱可以确定剥离实验成功.     

Mixed oxides obtained from Co and Mn containing layered double hydroxides: Preparation, characterization, and catalytic properties

Co-Mn-Al layered double hydroxides (LDHs) with various Co:Mn:Al molar ratios (4:2:0, 4:1.5:0.5, 4:1:1, 4:0.5:1.5, and 4:0:2) were prepared and characterized. Magnesium containing LDHs Co-Mg-Mn (2:2:2), Co-Mg-Mn-Al (2:2:1:1), and Co-Mg-Al (2:2:2) were also studied. Thermal decomposition of prepared LDHs and formation of related mixed oxides were studied using high-temperature X-ray powder diffraction and thermal analysis. The thermal decomposition of Mg-free LDHs starts by their partial dehydration accompanied by shrinkage of the lattice parameter c from ca. 0.76 to 0.66 nm. The dehydration temperature of the Co-Mn-Al LDHs decreases with increasing Mn content from 180 °C in Co-Al sample to 120 °C in sample with Co:Mn:Al molar ratio of 4:1.5:0.5. A subsequent step is a complete decomposition of the layered structure to nanocrystalline spinel, the complete dehydration, and finally decarbonation of the mixed oxide phase. Spinel-type oxides were the primary crystallization products. Mg-containing primary spinels had practically empty tetrahedral cationic sites. A dramatic increase of the spinel cell size upon heating and analysis by Raman spectroscopy revealed a segregation of Co-rich spinel in Co-Mn and Co-Mn-Al specimens. In calcination products obtained at 500 °C, the spinel mean coherence length was 5-10 nm, and the total content of the X-ray diffraction crystalline portion was 50-90%. These calcination products were tested as catalysts in the total oxidation of ethanol and decomposition of N₂O. The catalytic activity in ethanol combustion was enhanced by increasing (Co+Mn) content while an optimum content of reducible components was necessary for high activity in N₂O decomposition, where the highest conversions were found for calcined Co-Mn-Al sample with Co:Mn:Al molar ratio of 4:1:1.     

Thermal decomposition study and biological characterization of zinc(II) 2-chlorobenzoate complexes with bioactive ligands

New zinc(II) 2-chlorobenzoates of general formula [Zn(2-ClC₆H₄COO)₂(L)₂] (where L = caffeine—caf, urea—u, methyl-3-pyridylcarbamate—mpc, phenazone—phen, theophylline—thp) were synthesised and characterised by elemental analysis and IR spectroscopy. The thermal behaviour of the complexes was studied by TG/DTG and DTA methods in nitrogen and in air atmosphere. During the thermal decomposition of the studied compounds the release of organic ligands take place followed by the decomposition of 2-chlorobenzoate anion. The volatile decomposition intermediates were proved by mass spectrometry. Zinc oxide was found as the final product of the thermal decomposition performed up to 1,000 K. The antimicrobial activity of the zinc(II) complexes against various strains of bacteria, yeasts and filamentous fungi has been investigated. It was found that the prepared compounds decreased the growth of Staphylococcus aureus, Escherichia coli, Candida albicans, Rhizopus oryzae and Microsporum gypseum, respectively. The most resistant to all tested compounds was probiotic strain of Lactobacillus plantarum. The presence of zinc and ligands in the prepared compounds increased the inhibitory effect compared to sodium salt of prepared compounds and free ligands.     

Preparation, X-ray crystallography, and thermal decomposition of some transition metal perchlorate complexes of hexamethylenetetramine

The perchlorate complexes of manganese, nickel, and zinc with hexamethylenetetramine (HMTA) of the general formula [M(H2O-HMTA-H2O)2(H2O-ClO4)2(H2O)2] (where M=Mn, Ni, and Zn) have been prepared and characterized by X-ray crystallography. Thermal studies were undertaken using thermogravimetry (TG), differential thermal analysis (DTA), and explosion delay (DE) measurements. The kinetics of thermal decomposition of these complexes was investigated using isothermal TG data by applying isoconversional method. The decomposition pathways of the complexes have also been proposed. These were found to explode when subjected to higher temperatures.     

Stability and thermodynamics of La(III)-, Pr(III)-, Nd(III)-, Gd(III)- and Eu(III)-p-nitrobenzaldehyde thiosemicarbazone systems

Three complexes containing bidentate N-2,3-dimethylphenylglycine, (2,3-HDPG), N-2,4-dimethylphenylglycine, (2,4-HDPG) and N-2-ethylphenylglycine, (2-HEPG) acids have been prepared and characterized. These compounds have the general formula Zn(2,3-DPG)₂·2 H₂O, Zn(2,4-DPG)₂ and Zn(2-EPG)₂·2 H₂O, respectively. The structure of the complexes as inferred from their chemistries have been found to be compatible with the infrared spectral data. The thermal behaviour of these complexes has been studied from their TG, DTG and DSC diagrams obtained in a dynamic atmosphere of pure air. Heats of dehydration have been calculated from DSC curves.     

Thermal,spectral and biological properties of Zn(II) complex compounds with phenazone

The thermal decomposition of the complexes Zn(form)₂⋅2phen (I), Zn(ac)₂⋅2phen (II), Zn(prop)₂⋅2phen (III), Zn(but)₂⋅2phen (IV), where phen=phenazone, form=formiate, ac=acetate, prop=propionate, but=butyrate has been studied in air by TG/DTG and DTA methods. The possible mechanism of the thermal decomposition was proposed. The final product of thermal decomposition was ZnO. IR data show unidentate coordination of carboxylate group to Zn(II) ion. The complexes were tested against various strains of microorganisms and their efficiency decrease in the sequence yeasts >bacteria>filamentous fungi.