三苯胺-螺硅芴共聚物的合成

三苯胺-螺硅芴共聚物的合成;螺硅芴;三苯胺;共聚物;合成     

新型可溶性聚氨酯酰亚胺嵌段共聚物的合成

聚氨酯酰亚胺;多嵌段共聚物;合成;可溶性     

水溶性AM-St两亲嵌段共聚物的自乳化微乳液法合成

水溶性AM-St两亲嵌段共聚物的自乳化微乳液法合成;丙烯酰胺;苯乙烯;疏水缔合共聚物     

两亲型聚L-亮氨酸-聚乙二醇单甲醚嵌段共聚物的合成与表征

开环聚合;生物降解共聚物;两亲型聚L-亮氨酸-聚乙二醇单甲醚嵌段共聚物的合成与表征     

缩水甘油苯基醚-缩水甘油正丁基醚共聚物磺酸钠的合成及表面活性

缩水甘油苯基醚-缩水甘油正丁基醚共聚物磺酸钠的合成及表面活性;缩水甘油苯基醚-缩水甘油正丁基醚共聚物磺酸钠; 合成; 表面性质; 胶束     

PBLG-PEG-PBLG嵌段共聚物的合成及其CHO细胞毒性

PBLG-PEG-PBLG嵌段共聚物的合成及其CHO细胞毒性;聚谷氨酸苄酯;聚乙二醇;嵌段共聚物;细胞毒性     

大网均孔苯乙烯共聚物的合成、性质和应用

本文综述了大网均孔苯乙烯共聚物的合成、性质和应用,引用文献60篇。     

微波辅助壳聚糖接枝聚乳酸共聚物的合成及表征

在微波辅助下,以辛酸亚锡为催化剂、壳聚糖(CS)为大分子引发剂引发消旋丙交酯（D,L-LA）本体开环聚合制备了壳聚糖接枝聚乳酸共聚物。通过正交实验研究了微波功率、催化剂用量、反应温度和反应时间对聚合反应的影响,确定了最佳合成条件。并通过红外光谱、元素分析、核磁共振氢谱、X-射线衍射和热分析对接枝共聚物的结构与性能进行了表征。结果表明,在微波条件下,能快速、有效地合成预定结构的壳聚糖接枝聚乳酸共聚物;聚乳酸支链的引入,有效削弱了壳聚糖分子间和分子内较强的氢键作用,与相应的壳聚糖比较,共聚物的结晶性能下降,热分解温度降低;原料配比对共聚物的结构与性能有显著影响,随nD,L-LA/nCS糖环数值增大,共聚物中平均乳酰单元数逐渐增大,共聚物的结晶性能、起始分解温度逐渐下降。     

硫醇类配体修饰金纳米粒子在嵌段共聚物中自组装的研究进展

本文综述了不同类型硫醇配体修饰金纳米粒子的合成方法以及功能性金纳米粒子在嵌段共聚物薄膜中的自组装研究进展,重点介绍了硫醇类配体修饰金纳米粒子的合成方法,包括Brust合成法、原位合成法、grafting from合成法、配体置换法、单晶模板法等。总结了硫醇基小分子或聚合物配体修饰的金纳米粒子与嵌段共聚物之间自组装的调控方法,如利用配体与嵌段共聚物组分的隔离作用、配体与嵌段共聚物组分形成的氢键作用、溶剂蒸气退火或热退火等诱导嵌段共聚物/纳米粒子复合薄膜自组装。展望了功能性金纳米粒子以及嵌段共聚物/金纳米复合材料的发展方向。     

1,4-丁炔二醇与4,4′-二乙炔联苯共聚物的合成及表征研究

 本文用(Ph₃P)₂PdCl₂为催化剂,合成了1,4-丁炔二醇(BD)与4,4-二乙炔联苯(DEBP)共聚物。对用不同比例的两种单体得到的共聚物测定了比重(d₄²⁵、溶胀度(θ_D)、最良溶剂及相邻两交联点之间的平均分子量(M_c)。实验表明,在两种单体摩尔比中,DEBP用量越多,共聚物中泡状微孔越多,颜色越淡,溶胀度和比重越小,交联度越大;DEBP/BD(摩尔比)大于1/5时,共聚物的最良溶剂为苯,溶度参数为9.15卡^0.5·cm^-1.5,是1/10时,其最良溶剂为乙醇,溶度参数是12.7卡^0.5·cm^-1.5。对共聚物还做了红外光谱表征。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.