A hierarchical self-assembly route to three-dimensional polymer-quantum dot photonic arrays

We demonstrate a new hierarchical self-assembly strategy for the formation of photonic arrays containing quantum dots (QDs), in which sequential self-assembly steps introduce organization on progressively longer length scales, ranging from the nanoscale to the microscale regimes. The first step in this approach is the self-assembly of diblock copolymers to form block ionomer reverse micelles (SA1); within each micelle core, a single CdS QD is synthesized to yield the hybrid building block BC-QD. Once SA1 is completed, the hydrophobic BD-QD building blocks are blended with amphiphilic block copolymer stabilizing chains in an organic solvent; water addition induces secondary self-assembly (SA2) to form quantum dot compound micelles (QDCMs). Finally, aqueous dispersions of QDCMs are slowly evaporated to induce the formation of three-dimensional (3D) close-packed arrays in a tertiary self-assembly step (SA3). The resulting hierarchical assemblies, consisting of a periodic array of hybrid spheres each containing multiple CdS QDs, exhibit the collective property of a photonic stop band, along with photoluminescence arising from the constituent QDs. A high degree of structural control is possible at each level of organization by judicious selection of experimental variables, allowing various parameters governing the collective optical properties, including QD size, nanoparticle spacing, and mesocale periodicity, to be independently tuned. The resulting control over optical properties via successive self-assembly steps should provide new opportunities for hierarchical materials for QD lasers and all-optical switching.     

Formation of zein spheres by evaporation-induced self-assembly

Zein is an amphiphilic protein capable of self-assembly into microspheres. Zein microspheres may form by evaporation-induced self-assembly (EISA) of zein solutions in ethanol/water. The formation of microspheres is of particular interest for the development of delivery systems. Zein solutions in ethanol/water 75?% (v/v) were slowly evaporated to promote self-assembly of microspheres. The ethanol content of the solvent decreased during EISA changing solvent polarity which induced self-assembly of zein particles. The growth of zein spheres was modeled from the hydrophobic and hydrophilic contributions to the interfacial free energy (R ²?=?0.92). The good fit indicated that during EISA zein microspheres increased in size due to hydrophobic interactions between zein molecules. The model may allow the prediction of evaporation time and thus control over microsphere size.     

Dynamic self-assembly of polymer colloids to form linear patterns

A dynamic self-assembling process is reported which involves drying a droplet of positively charged colloidal suspension on a flat negatively charged hydrophilic surface. This extremely simple method affords lines of colloidal particles with regular 1.5-4.5 microm line spacing and smaller than 2 microm line width over a broad surface area. The ordered region diffracts light to display an iridescent appearance and generates first-order diffraction spots when illuminated by a He-Ne laser. A periodic stick-slip motion of the drying liquid front is observed during the drying process using optical microscopy. The periodic motion must be related to the periodic particle deposition. We propose that the simultaneous deposition of the particles at a fixed distance (i.e., the line spacing) behind the previous line of particles where the contact line is pinned is in turn responsible for the periodic stick-slip motion. The key distinguishing feature of the present system is the attractive interaction between the particles and the surface, which instigates the periodicity of the particle deposition.     

Stepwise self-assembly of DNA tile lattices using dsDNA bridges

The simple helical motif of double-strand DNA (dsDNA) has typically been judged to be uninteresting for assembly in DNA-based nanotechnology applications. In this letter, we demonstrate construction of superstructures consisting of heterogeneous DNA motifs using dsDNA in conjunction with more complex, cross-tile building blocks. Incorporation of dsDNA bridges in stepwise assembly processes can be used for controlling length and directionality of superstructures and is analogous to the "reprogramming" of sticky-ends displayed on the DNA tiles. Two distinct self-assembled DNA lattices, fixed-size nanoarrays, and extended 2D crystals of nanotracks with nanobridges, are constructed and visualized by high-resolution, liquid-phase atomic force microscopy.     

Liposome induced self-assembly of gold nanoparticles into hollow spheres

Gold nanoparticles were prepared by the reduction of [(C7H15)4N]+ [AuCl4]- with 3,4-ethylenedioxythiophene (EDOT) as reductant in toluene solution. The employed stabilizers include 3,3'-thiodipropionic acid (TDPA), 1-dodecanethiol (DDT), (+/-)-10-camphorsulfonic acid (CSA), and 11-mercaptoundecanoic acid (MUA). The reaction processes were tracked by UV-vis and FT-IR spectroscopy, and the as-prepared gold nanoparticles were characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive spectroscopy, and X-ray photoelectron spectroscopy measurements. When TDPA and MUA, which possess both -S- and -COOH groups, were used as the stabilizer in the preparation, the as-prepared nanoparticles could self-assemble into hollow spheres. While when DDT with a -SH group or CSA with a -SO3H group was used as the protecting agents, only discrete gold nanoparticles were observed. The results show that the groups of both -S- and -COOH in the stabilizer play an important role in forming the hollow nanospheres. It is proposed that the formation mechanism of the hollow spheres is a liposome that formed between -COO- and [(C7H15)4 N]+ could act as a template to induce the self-assembly of the gold nanoparticles into the hollow spheres.     

Synthesis and hierarchical self-assembly of cavity-containing facial amphiphiles

The synthesis and aggregation behavior of cavity-containing facial amphiphiles is described. The molecules consist of a glycoluril-based rigid cavity functionalized with two water-soluble benzoate groups. By specific molecular recognition processes in water, the amphiphilic hosts self-assemble in a hierarchical process to form arrays of molecules. Depending on the counterions, these arrays can be assembled into well-defined aggregates of mesoscopic size. The size and shape of the aggregates can be tuned by variations in the size and substitution pattern of the cavities of the host molecules.     

Large-scale fabrication of TiO2 hierarchical hollow spheres

In this Communication, we report the fabrication of well-crystallized rutile-phase TiO2 hollow spheres using potassium titanium oxalate as the precursor. The spheres exhibited unique three-dimensional hierarchical architectures and demonstrated a significantly improved photocatalytic performance. The synthetic strategy used in this process represents a general approach and therefore may contribute to the formation mechanisms of hollow nanostructures.     

MnS hierarchical hollow spheres with novel shell structure

High yields of MnS microspheres with novel hierarchical structure were prepared through a simple solution method. Field emission scanning electron microscopy and transmission electron microscopy analyses reveal that the microsphere has a core-shell structure: the interior hollow sphere is covered by a shell consisting of nanorod arrays. Interestingly, the nanorod is a wurtzite (WZ)/zinc blende (ZB) phase admixture with a large amount of stacking faults/twins. The alternation of WZ and ZB along the growth direction of the nanorod enables it to exhibit the features of a quantum well. Furthermore, the WZ/ZB admixture structure could also be regarded as a type II homomaterial heterostructure. All these features imply that the novel core-shell structure has great potential for applications, among them the quantum well photoelectrical and heterostructure photoconduction fields.     

A sonochemical approach to hierarchical porous titania spheres with enhanced photocatalytic activity

A novel sonochemical approach has been developed to prepare hierarchical porous titania spheres in the presence of a triblock copolymer; it was found that textural meso- and macro-porosity could enhance the photocatalytic activity of mesoporous TiO2.     

One template synthesis of raspberry-like hierarchical siliceous hollow spheres

We report the synthesis of raspberry-like hierarchical siliceous hollow spheres (HSHS) via a one-pot, one template approach. The siliceous species and block copolymer molecules self-assemble simultaneously into composite spherical micelles and vesicles in solution. The colloidal interaction between spheres with different sizes gives rise to the final HSHS structure with a raspberry morphology.     

pH-responsive core-shell particles and hollow spheres attained by macromolecular self-assembly

According to our "block-copolymer-free" strategy for self-assembly of polymers, noncovalently connected micelles (NCCM) with poly(epsilon-caprolactone) (PCL) as the core and poly(acrylic acid) (PAA) as the shell in aqueous solutions were attained due to specific interactions between the component polymers. The micellar structure was then locked in by the reaction of PAA with diamine. Afterward, hollow spheres based on PAA network were obtained by either core degradation with lipase or core dissolution with dimethylformamide of the cross-linked micelles. The cavitation process was monitored by dynamic light scattering, which indicated a mass decrease and size expansion. The hollow structure is confirmed by transmission electron microscopy observations. The resultant hollow spheres are pH- and salt-responsive: there is a substantial volume increase when pH changes from acid to base, and vice versa. The volume change takes place dramatically over the pH-range from 5.8 to 7.5. Furthermore, this volume-pH-dependence is found to be completely reversible provided the effect of ionic strength is excluded. The volume change can be adjusted by changing the shell thickness and the cross-linking degree of the hollow spheres. The salt effect on the hollow sphere size depends on pH: with increasing salt concentration the size shows an increase, a decrease, and a little change in acidic, basic, and neutral media, respectively.     

One-step synthesis of ordered mesoporous carbonaceous spheres by an aerosol-assisted self-assembly

Ordered mesoporous carbonaceous spheres with variable structures have been successfully prepared by using phenolic oligomers as a carbon precursor and amphiphilic triblock copolymers as a template via a one-step aerosol-assisted organic-organic self-assembly method.     

Microporous nanocomposites of Pd and Au nanoparticles via hierarchical self-assembly

Microporous nanocomposites of Pd and Au nanoparticles were generated by utilizing electrostatic interaction between oppositely charged Au nanoparticles coated with carboxylate groups (Au-COO-) and spherical aggregates of Pd nanoparticles (Pd- NH3+) with a mean diameter of 80+/-20 nm stabilized and cross linked by octa(aminopropyl)silsesquioxane octahydrochloride (POSS-NH3+). Amide bonds were formed between the reactive ion couples that are well defined in the Pd-Au colloidal nanocomposites during a subsequent chemical reaction to generate more stable nanocomposites with improved chemical and physical properties.     

Synthesis of three-dimensional hierarchical cobalt hydroxide microstructures

β-Co(OH)2 with three-dimensional (3-D) structures was prepared by a simple hydrothermal method. It was found that the amount of cetyltrimethylammonium bromide (CTAB), the pH value, and the reaction time all had an important influence on the formation of this morphology. The products were characterized by X-ray diffraction, energy-dispersive X-ray analysis, and scanning electron microscopy. A possible mechanism of the formation of the 3-D microstructures of β-Co(OH)2 was proposed.     

Direct synthesis of uniform hollow carbon spheres by a self-assembly template approach

Hollow carbon spheres (50-100 nm) have been synthesized by a self-assembly approach using hexachlorobenzene and Na. NaCl which generated during the reaction has been successfully exploited as a template for the direct synthesis of porous carbon materials, which can be subsequently removed from carbon product by annealing above 1400 degrees C.     

Spontaneous self-assembly of metal-organic cationic nanocages to form monodisperse hollow vesicles in dilute solutions

In this communication we report the unprecedented spontaneous self-assembly of cationic nanoporous metal-organic coordination cages (nanocages) into giant hollow vesicle-like structures in polar solvents. Such highly soluble nanocages (macrocations) have separated hydrophobic regions. However, their assembly is not due to hydrophobic interactions but the counterion-mediated attractions, very similar to the unique self-assembly of polyoxometalate macroanions into single-layer, spherical blackberry structures, as characterized by laser light scattering and TEM studies. This is the first study on the solution behavior of metal-organic nanocages and also the first report on the self-assembly of soluble macrocations. Therefore, the blackberry structure is likely to be a universal type of self-assembly for soluble macroions. In addition, the self-assembled nanocages can provide blackberry structures a wide range of organic functionalities that are impossible to reach with purely inorganic systems, which may open the door to many types of applications.