Determination of water with a modified Karl Fischer reagent Stability and the mechanism of reaction with water

It is shown that the water equivalent of the modified Karl Fischer reagent (standard Karl Fischer reagent in which dimethylformamide is substituted for methanol), depending on pKa and the concentration of the solvent used for preliminary titration, is not dependent on the water concentration being determined. Also discussed are different aspects of the stability of the Karl Fischer reagent and its modifications. On the basis of the literature data and the findings of this work, a mechanism of interaction between water and the modified Karl Fischer reagent is proposed: in the first stage of the reaction pyridine sulphodioxide is solvated with solvents containing active hydrogen (alcohols, organic acids and water). The lower the value of pK_a of the solvent, the greater the contribution of water to the pyridine sulphodioxide solvation reaction. The results of this work suggest that, especially in particular cases, the water equivalent of the Karl Fischer reagent and its modifications should be determined under the same conditions as the determination of water in the sample.     

Reaction rates between water and the Karl Fischer reagent

Reaction rates between water and the Karl Fischer reagent have been determined by potentiometric measurement for various compositions of the Karl Fischer reagent. The study has been made with an iodine complex concentration of 0.3-1.2 mM and sulphur dioxide complex at 0.01-0.5M. The concentration of excess of pyridine had no measurable effect on the rate of the main reaction. The reaction was found to be first-order with respect to iodine complex, to sulphur dioxide complex, and to water. The rate constant was (1.2+/-0.2) x 10(3) 1(2). mole(-2). sec(-1). In an ordinary titration it is therefore essential to keep the sulphur dioxide concentration high for the reaction to go to completion within a reasonable time. The extent of side-reactions was found to be independent of the iodine concentration at low concentrations. The side-reactions increased somewhat with increasing sulphur dioxide pyridine concentrations and decreased to about 60% when the temperature was lowered from 24 degrees to 7 degrees.     

Determination of water in organic solvents by flow-injection analysis with Karl Fischer reagent and a biamperometric detection system

A flow-injection system with a biamperometric flow-through detector provided with two platinum plate electrodes was tested for the determination of water with a two-component pyridine-free Karl Fischer reagent. The response was shown to be linear in the concentration range 0.03-0.11% water in methanol, ethanol or 2-propanol, with methanol as the carrier solvent. The maximum sampling frequency was about 150 samples per hr. It appeared to be possible to introduce a membrane separation step, thus allowing for the determination of water in fouled process streams. To avoid direct contact between the Karl Fischer solution and the pumping tubes, and thus extend the lifetime of the tubes, an indirect delivery system, based on replacement of the solution by pumped silicone oil, was also applied.     

Determination of water in thiols by Karl Fischer titration

Water in thiol-containing samples may be determined by titration with Karl Fischer reagent after conversion of the thiol into a thioether. Both acrylonitrile and N-ethylmaleimide have been found to be suitable reagents.     

无吡啶卡尔.费休试剂微库仑法测定石油产品中微量水分的研究

研究了无吡啶卡尔·费休试剂的组成及特性，并建立了利用无吡啶卡尔·费休的微库仑法测定石油产品中水含量的分析方法。方法用二乙醇胺代替吡啶制备成新的卡氏试剂、无臭味、操作方便、分析速度快、灵敏度高、重复性好，其检测下限为１．０μｇ／ｇ，实际样品测定的相对标准偏差小于５％。方法应用于石油产品中水分的测定，结果令人满意。     

Coulometric trace determination of water by using Karl Fischer reagent and potentiometric end-point detection

A new approach to the determination of water via the Karl Fischer reaction is described. Iodine is coulometrically generated and the end-point corresponding to a slight excess of iodine, is detected potentiometrically with a non-polarized platinum electrode. Samples of 1-500 mul containing 0.05-200 mug of water were analysed with a standard deviation of 0.015 mug in the range 0.05-20 mug of H(2)O. A specially constructed electrolysis cell was used in combination with an LKB 16300 Coulometric Analyzer and the time for a complete analysis was 1-4 min, depending on sample size. The reagent composition has been optimized in order to enhance the rate of the main reaction and to minimize the extent of side-reactions. Decreasing the temperature reduced the extent of side-reactions. The displacement of end-point potential on dilution was studied and a correction is discussed.     

Urea as the basic component in pyridine-free Karl Fischer reagent

A solution of urea, sulphur dioxide and sodium salicylate in methanol is proposed as the solvent in the Karl Fischer titration, with a separate iodine solution as titrant. Comparison of the performance of this solvent with that of some commercial reagents shows that it is has distinct advantages for use with amine samples.     

Determination of total water content in inulin using the volumetric Karl Fischer titration

A new sample preparation method for the water content determination of inulin by volumetric Karl Fischer (KF) titration was developed and compared to the usual method of introducing the sample directly in the methanol-based working medium, modified or not by formamide (1:3, v/v) in order to increase sample solubility. In the proposed method, inulins were externally prepared by dissolving them in pure formamide (2.5:7.5, w/w). The time of analysis of the liquid/liquid reaction of the new method between the dissolved sample and the reaction medium is about 1–2 min, while the usual KF method is stopped after the 10 min delay time. The developed method permits the determination of water included in the crystals of the sample, confirmed by analysing both crystalline and amorphous inulin samples. Another advantage of this new method is its applicability for the water content determination of other polysaccharides that are not readily soluble in the working medium. Moreover, water content determination can be done by any type of volumetric KF titrator, as this proposed technique is not dependent on any additional tools such as a built-in homogeniser or a heatable titration beaker.     

Determination of the water content of amphiphilic liquid crystals by coulometric Karl Fischer titration

An apparatus is described, which allows the precise determination of the water content of amphiphilic liquid crystals by means of coulometric Karl Fischer titration. The scope and limitations of this method are described.     

Determination of trace water in gas samples by an improved Karl Fischer coulometer.

The determination of trace water in gas samples, such as isobutene, chloromethane (polymeric staple gases) and SF6 by a conventional Karl Fischer coulometer is very difficult, because of the adsorption of trace water on the surface of sample pipe, the gasification of the liquefied samples, and the migration of moisture into the measuring cell from the surroundings. To solve these problems, we improved a device for coulometric determination of water by Karl Fischer method. The improved coulometer was used to determine the trace water in isobutene, chloromethane and SF6; RSD was less than 5%, and recoveries ranged from 94.1 to 109.1%, which is adequate for the analysis of industry.     

Reaction of low valent transition metal complexes and their phosphine derivatives with Karl Fischer reagent

The Karl Fischer reagent reacts with many low valent transition metal complexes to bring about oxidation of the metal. The reaction can be used for the oxidimetric determination of these complexes in solution and must be taken into account when P^III ligands are determined in low valent metal complexes.     

Determination of orthoesters by hydrolysis and Karl Fischer titrimetry

The acid hydrolysis of orthoesters has been made the basis of a titrimetric method. The method involves reaction of an orthoester with a known excess of water in a trichloroacetic acid-methyl alcohol system, followed by determination of unreacted water by Karl Fischer titration.     

Determination of water traces in various organic solvents using Karl Fischer method under FIA conditions

Flow injection methods utilising the Karl Fischer (KF) reaction with spectrophotometric and potentiometric detection are described for the determination of the trace water content in various organic solvents. Optimisation of the methods resulted in an accessible (linear) working range of 0.01-0.2% water for many solvents studied with a typical precision of 1-2% R.S.D. Only 50 mul of organic solvent was injected and the sampling frequency was about 120 samples per h. Since the slopes of the calibration curves were different for different solvents appropriate calibration was required. Problems associated with spectrophotometric detection and caused by refractive index changes were pointed out and a nested-loop configuration was proposed to overcome this kind of interference. The potentiometric method with a novel flow-through detector cell was shown to surpass the performance of spectrophotometric detection in any respect. The characteristics of the procedures developed made them well applicable for on-line monitoring of technical solvent distillations in an industrial plant.     

Coulometric Karl Fischer titration of trace water in diaphragm-free cells

Factors influencing the accuracy and precision for diaphragm-free Karl Fischer coulometric determinations of low μg-amounts of water have been studied using the Metrohm 756 (pulsed current) coulometer and eight different types of commercial coulometric reagents and some modifications of these. As in the case of diaphragm-free coulometric titration of large amounts of water, the positive errors, due to the formation of oxidizable reduction products (of sulfur dioxide) in the cathode reaction (besides hydrogen), were found to be minimized by the use of highest possible pulse current (in the range 100–400 mA) in combination with the fastest possible titration rate. Most accurate (102–103%) and precise results (typical relative standard deviation 1.8%) were obtained for reagents containing very large concentrations of imidazole in combination with the presence of modifiers like hexanol, chloroform and propylene glycol (i.e. the HYDRA-POINT reagents). Similar results were obtained when this type of reagent was mixed 60/40 with xylene according to the ASTM recommendation for water determinations in petroleum products like crude and lubricating oils. Addition of decanol to this type of reagent mixture was found to reduce the influence from the oxidative reduction products significantly. A reduction of the error from 3.6% relative to 1.6% was achieved by addition of 9% (v/v) of decanol to a 60/40 reagent mixture of HYDRA-POINT Coulometric Gen (containing hexanol as modifier) and xylene. For larger concentrations of decanol the pulse current had to be lowered to 100 mA and this might explain why no further improvement was observed. An additional attempt to minimize the interference by lowering the concentration of sulfur dioxide in the reagents gave no significant effect. However, by means of a home-built computer-controlled coulometric instrumentation based on continuous instead of pulsed current (including a large cathodic current density) it was possible to achieve recovery rates close to 100% for the best reagents investigated. The reason for this improvement is discussed.     

Determination of small amounts of mercury

A number of methods for the determination of trace amounts of mercury are reviewed with emphasis on sensitivity and ease of application.     

卡尔费休容量滴定法测定混胺燃料中水含量

研究了卡尔费休容量法测定碱性溶液混胺燃料中水含量的条件。分析了碱性物质对水测定的影响,在2～3 mL混胺燃料中加入10 g的苯甲酸时,混胺燃料的碱性不影响混胺燃料中水的测定结果。采用含吡啶和不含吡啶两种试剂测定混胺燃料中的水含量,其测定结果的相对标准偏差分别为5.58%,5.18%(n=8),回收率分别为92.0%,96.9%。通过加入适量的弱酸性物质苯甲酸调节pH值,卡尔费休法可用于混胺燃料水含量测定,采用不含吡啶卡尔费休试剂准确度更高。     

Reaction rates between water and some modified rapidly-reacting Karl Fischer reagents

Rate constants were determined for the reaction between water and various modified Karl Fischer reagents containing formamide, dimethylformamide or N-methylformamide. It was shown that the reaction rate can be increased by a factor of 100 by using a reagent containing 40% v/v formamide in pyridine compared to that obtained by use of the conventional methanolic reagent.     

Comparison of standards in the Karl Fischer method for water determination.

The use of 4-(5-nonyl)pyridine oxide and trioctylamine oxide for the extraction of niobium(V) from different mineral acid solutions is described. The influence of the concentration of the solvents, acids and salting-out agents is discussed. Separations of niobium(V) from tantalum(V) and zirconium(IV) have been achieved.     

Determination of trace moisture in hydrogen chloride gas by Karl Fischer titration

Moisture of several ppm in hydrogen chloride gas has been accurately determined by a new method using the Karl Fischer reagent, which hitherto had a limitation in accuracy because of a partial reaction with hydrogen chloride when direct titration was employed.The moisture in the sample gas was collected in a cold trap kept at about ?80 °C while the hydrogen chloride gas passed through and the frozen moisture was dissolved by pyridine-methanol (1:1) solvent. a KF Reagent of factoe: 0.35 mg H₂O/ml.Titration by the Karl Fischer reagent having the equivalency factor of, e.g., 0.5 mg H₂O/ml was carried out and the concentration of the moisture was calculated from the sample volume used.