Synthesis of gold nanoparticles using herbal Acorus calamus rhizome extract and coating on cotton fabric for antibacterial and UV blocking applications

Gold nanoparticles (AuNPs) have been synthesized by greener method using chloroauric acid as precursor and extract of Acorus calamus rhizome as reducing agent. Formation of AuNP was confirmed by the presence of Surface Plasmon Resonance (SPR) peak in UV–Visible spectral analysis. XRD and FT-IR spectral analyses were performed for characterization. SEM images show spherical morphology and HR-TEM images reveal nanosize of AuNPs. The AuNPs were then coated on cotton fabric by pad-dry-cure method and characterized by SEM with EDAX technique. The results reveal the deposition of AuNPs on the surface of cotton fabric. Uncoated cotton, neat extract coated cotton and extract containing AuNPs coated cotton fabrics were then tested for antibacterial activity against Gram positive (Staphylococcus aureus) and Gram negative (Escherichia coli) bacterial strains by AATCC 100 test method. It showed that the extract containing AuNPs coated cotton fabric had higher antibacterial activity than other test samples against E. coli. UV-DRS analysis performed on extract containing AuNPs coated cotton fabric showed improved UV-blocking property than uncoated cotton fabric and neat extract coated cotton fabric.     

Growth and fire resistance of colloidal silica-polyelectrolyte thin film assemblies

Thin films of colloidal silica were deposited on cotton fibers via layer-by-layer (LbL) assembly in an effort to reduce the flammability of cotton fabric. Negatively charged silica nanoparticles of two different sizes (8 and 27 nm) were paired with either positively charged silica (12 nm) or cationic polyethylenimine (PEI). PEI/silica films were thicker due to better (more uniform) deposition of silica particles that contributed to more than 90% of the film weight. Each coating was evaluated at 10 and 20 bilayers (BL). All coated fabrics retained their weave structure after being exposed to a vertical flame test, while uncoated cotton was completely destroyed. Micro combustion calorimetry confirmed that coated fabrics exhibited a reduced peak heat release rate, by as much as 20% relative to the uncoated control. The 10 BL PEI-8 nm silica recipe was the most effective because the coating is relatively thick and uniform relative to the other systems. Soaking cotton in basic water (pH 10) prior to deposition resulted in better assembly adhesion and flame-retardant behavior. These results demonstrate that LbL assembly is a useful technique for imparting flame retardant properties through conformal coating of complex substrates like cotton fabric.     

Maintaining hand and improving fire resistance of cotton fabric through ultrasonication rinsing of multilayer nanocoating

Thin films of environmentally benign polyelectrolytes, cationic chitosan (CH) and anionic poly(sodium phosphate) (PSP), were deposited on cotton fabric via layer-by-layer (LbL) assembly to reduce flammability. This CH–PSP nanocoating promotes charring of the cotton, rendering the fabric self-extinguishing. The coated fabric was rinsed in an ultrasonication bath between deposition steps to improve the softness (i.e., hand) of the coated fabric. Ultrasonication is believed to remove weakly adhered polyelectrolyte, preventing the fabric from becoming stiff, while improving anti-flammable behavior at a given coating weight. At 17 bilayers, only 9.1 wt% was added to the cotton, yet the coated cotton consistently passed vertical flame testing. Electron microscopy provides evidence of intumescence and confirms the cleaner deposition afforded by ultrasonication. The reduction in peak heat release rate and total heat release, as measured by micro cone calorimetry, were 73 and 81 % respectively, which is a new benchmark in LbL flame retardant coating on cotton. The mechanical properties of the fabric were measured using the Kawabata evaluation system, which showed that ultrasonication rinsing significantly improved the hand. The ability to render cotton fabric self-extinguishing, while maintaining a soft hand, marks a major milestone in the development of these environmentally-benign nanocoatings.     

Multifunctional superhydrophobic/oleophobic and flame-retardant cellulose fibres with improved ice-releasing properties and passive antibacterial activity prepared via the sol–gel method

In this research, a two-component sol–gel inorganic–organic hybrid coating was prepared on a cotton fibre surface. An equimolar sol mixture of the precursors 1H,1H,2H,2H-perfluorooctyltriethoxysilane (SiF) and P,P-diphenyl-N-(3-(trimethoxysilyl)propyl) phosphinic amide (SiP) was applied to cotton fabric samples using the pad-dry-cure method. The surfaces of the untreated and coated cotton fibres were characterised using scanning electron microscopy, Fourier transform-infrared spectroscopy, X-ray photoelectron spectroscopy, and time-of-flight-secondary ion mass spectrometry. The functional properties of the coated cotton fabric samples were investigated using static contact angle measurements with water and n-hexadecane, the ice-releasing test, antibacterial testing against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, thermogravimetric analysis in an air atmosphere, and vertical flammability tests. The results reveal the formation of a nanocomposite two-component inorganic–organic hybrid polymer network that is homogenously distributed over the cotton fibre surface. The presence of the SiP component in the two-component inorganic–organic hybrid coating did not hinder the functional properties imparted by the presence of the SiF component and vice versa, illustrating their compatibility. The cooperative action of the SiF and SiP components in the two-component coating provided the cotton fabric with exceptional multifunctionality, including simultaneous superhydrophobicity and high oleophobicity, passive antibacterial activity, and improved thermo-oxidative stability.     

阻燃超疏水棉纤维的制备及性能

将氢氧化镁(Mg(OH)₂)凝胶沉积到棉纤维上,以提高棉纤维表面粗糙度和阻燃性能,随后将含有Mg(OH)₂的棉纤维浸渍到聚二甲基硅氧烷(PDMS)溶液,获得阻燃超疏水棉织物。 并对棉纤维进行了傅里叶变换红外光谱仪(FTIR)、扫描电子显微镜(SEM)、疏水性、热稳定性、阻燃性能和耐久性测试。 结果表明,Mg(OH)₂负载到织物上,使得织物表面具有一定的微/纳米结构,形成了粗糙涂层。 当Mg(OH)₂浓度为1.0 mol/L时,Mg(OH)₂/PDMS改性的织物接触角(CA)可达158°,极限氧指数(LOI)提升至24.5%,导热系数为0.0525 W/(m·K), 具有超疏水和阻燃性能。 整理后织物经过20次洗涤,100次磨擦,极端条件处理后,CA仍大于150°,LOI值高于23%,显示了较好的耐久性。     

Plasma-assisted regenerable chitosan antimicrobial finishing for cotton

In this study, nitrogen-plasma treatment was used to enhance the coating of chitosan onto cotton fabric and chlorine was introduced into nitrogen-containing groups on the chitosan coated fabric in order to make it antimicrobial by chlorination with sodium hypochlorite. The antimicrobial property and its rechargeability were investigated. FTIR, UV and scanning electron microscope were used to evaluate the surface properties, including the existence of chitosan on cotton fabric, the content of chitosan on cotton fabric and the surface topography of cotton fabric after modification. The results showed that nitrogen-plasma introduces nitrogen-containing groups into cotton fabric, the coating of chitosan on fabric was improved with nitrogen plasma treatment and chlorine was introduced into the chitosan coated fabric successfully which inhibits bacteria effectively and it is rechargeable. Thus, the antimicrobial property of cotton fabric coated with chitosan with the aid of nitrogen-plasma treatment after chlorination achieved good effects.     

Layer-by-layer assembled thin films based on fully biobased polysaccharides: chitosan and phosphorylated cellulose for flame-retardant cotton fabric

Polyelectrolytes multilayer (PEM) films based on fully biobased polysaccharides, chitosan and phosphorylated cellulose (PCL) were deposited on the surface of cotton fabric by the layer-by-layer assembly method. Altering the concentration of PCL could modify the final loading on the surface of cotton fabrics. A higher PCL concentration (2 wt%) could result in more loading. Attenuated total reflection Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and energy-dispersive X-ray analysis directly showed that chitosan and PCL were successfully deposited onto the surface of cotton fabric. In the vertical flame test, the cotton fabric with 20 bilayers at the higher PCL concentration (2 wt%) could extinguish the flame. Microcombustion calorimetry results showed that all coated cotton fabrics reduced the peak heat release rate (HRR) and total heat release (THR) relative to the pure one, especially for (CH0.5/PCL2)₂₀, which showed the greatest reduction in peak HRR and THR. Thermogravimetric analysis results showed that the char residue at temperatures ranging from 400 to 700 °C was enhanced compared to that in the pure cotton fabric, especially in the case of higher PCL concentration (2 wt%). The work first provided a PEM film based on fully biobased polysaccharide, chitosan and PCL on cotton fabric to enhance its flame retardancy and thermal stability via the layer-by-layer assembly method.     

Novel multifunctional water- and oil-repellent,antibacterial, and flame-retardant cellulose fibres created by the sol–gel process

This research aimed to prepare cotton fibres with novel multifunctional water- and oil-repellent, antibacterial, and flame-retardant properties. A three-component equimolar sol mixture, which included 1H,1H,2H,2H-perfluorooctyltriethoxysilane, 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride, and P,P-diphenyl-N-(3-(trimethoxysilyl)propyl) phosphinic amide, was applied to the cotton fabric using the sol–gel process. The presence of the coating on the cotton fibres was confirmed by Fourier transform-infrared spectroscopy and X-ray photoelectron spectroscopy. The functional properties of the coated cotton fabric were determined from liquid contact angle measurements and antibacterial activity, burning behaviour, and thermo-oxidative stability studies. The results demonstrate that a unique, compatible, and uniform organic-inorganic hybrid polymer network was formed on the fabric surface, which preserved its simultaneous hydrophobic (water contact angle of 135 ± 2°), oleophobic (n-hexadecane contact angle of 117 ± 1°), and bactericidal (bacterial reduction of 100 %) properties and incorporated the enhanced thermo-oxidative stability of the modified cellulose fibres.     

环氧氯丙烷修饰的对位和间位芳纶涂覆剂研究

制备了具有环氧丙基侧链的对位芳纶(PPTA-ECH)和间位芳纶(PMIA-ECH),并将其用做对位芳纶(PPTA)织物/环氧树脂复合材料中PPTA织物的涂覆剂。采用场发射扫描电子显微镜(FE-SEM)及XPS等方法对PPTA织物表面的PPTA-ECH涂层结构进行了表征。考察了PPTA-ECH和PMIA-ECH涂覆的PPTA织物/环氧树脂复合材料的层间剪切强度和面内剪切强度,并与未经涂覆的PPTA织物复合材料的性能作比较。结果表明,PPTA-ECH和PMIA-ECH可显著改善PPTA织物和环氧树脂之间的界面性能。涂覆了PPTA-ECH及PMIA-ECH的PPTA织物/环氧树脂复合材料的层间剪切强度(ILSS)比未经涂覆的复合材料分别提高了26.20%和14.76%,面内剪切强度(ISS)分别提高了26.98%和11.86%。由于PPTA-ECH对PPTA纤维具有更强的亲和能力,因此PPTA-ECH在层间剪切强度和面内剪切强度方面的增强效果均优于PMIA-ECH。对PPTA-ECH在PPTA纤维表面铺展与吸附及对复合材料的增强机理也进行了初步探讨。作为新型涂覆剂,PPTA-ECH在对位芳纶复合材料的开发应用方面具有潜在的应用前景。     

Silica–silver core–shell particles for antibacterial textile application

The silica–silver core–shell particles were synthesized by simple one pot chemical method and were employed on the cotton fabric as an antibacterial agent. Extremely small (1–2 nm) silver nanoparticles were attached on silica core particles of average 270 nm size. The optimum density of the nano silver particles was found which was sufficient to show good antibacterial activity as well as the suppression in their surface plasmon resonance responsible for the colour of the core–shell particle for antibacterial textile application. The change in the density and size of the particles in the shell were monitored and confirmed by direct evidence of their transmission electron micrographs and by studying surface plasmon resonance characteristics. The colony counting method of antibacterial activity testing showed excellent results and even the least silver containing core–shell particles showed 100% activity against bacterial concentration of 10⁴ colony counting units (cfu). The bonding between core–shell particles and cotton fabric was examined by X-ray photoelectron spectroscopy. The antibacterial activity test confirmed the firm attachment of core–shell particles to the cotton fabric as a result 10 times washed sample was as good antibacterial as that of unwashed sample. The bacterial growth was inhibited on and beneath the coated fabric, at the same time no zone of inhibition which occurs due to the migration of silver ions into the medium was observed indicating immobilization of silver nanoparticles on silica and core–shell particles on fabric by strong bonding.     

Using graphene/TiO2 nanocomposite as a new route for preparation of electroconductive,self-cleaning,antibacterial and antifungal cotton fabric without toxicity

A novel and efficient process is reported for fabrication of electroconductive, self-cleaning, antibacterial and antifungal cellulose textiles using a graphene/titanium dioxide nanocomposite. Cotton fabric was loaded with graphene oxide using a simple dipping coating method. The graphene oxide-coated cotton fabrics were then immersed in TiCl₃ aqueous solution as both a reducing agent and a precursor to yield a fabric coated with graphene/titanium dioxide nanocomposite. The crystal phase, morphology, microstructure and other physicochemical properties of the as-prepared samples were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy and UV-Vis reflectance spectroscopy. Electrical resistance, self-cleaning performance, antimicrobial activity and cytotoxicity of treated fabrics were also assessed. The electrical conductivity of the graphene/titanium dioxide nanocomposite-coated fabrics was improved significantly by the presence of graphene on the surface of cotton fabrics. The self-cleaning efficiency of the treated fabrics was tested by degradation of methylene blue in aqueous solution under UV and sunlight irradiations. The results indicated that the decomposition rates of methylene blue were improved by the addition of graphene to the TiO₂ treatment on fabrics. Moreover, the graphene/titanium dioxide nanocomposite-coated cotton samples had negligible toxicity and possessed excellent antimicrobial activity.     

Durable,water-cleanable,superhydrophilic coatings for oil/water separation under harsh conditions

A simple, economical, and efficient method for fabricating stable hydrophilic/underwater superoleophobic coating under harsh conditions remains a significant challenge. Here, by the hydrolysis of 3-(Methacryloyloxy) propyltrimethoxysilane (TMSPMA) on cotton fabric and the free radical polymerization of [2-(Methacryloyloxy) ethyl] dimethyl-(3-sulfonic acid propyl) ammonium hydroxide (SBMA) and TMSPMA, a superhydrophilic coating was fabricated. The coating can withstand harsh environments, such as strong acid and alkali. In addition, the coated cotton fabrics show an effective separation of surfactant-stabilized oil-in-water emulsions with extreme flux as high as 1500 Lm^?2 h^?1 only under gravity. Importantly, the oil-contaminated coated cotton fabrics can be cleaned only by water washing. The outstanding properties of the coating including durability, recyclability and resistance to harsh environment, highlight its practical application in emulsion separation and oily wastewater purification.     

Effect of thymol on the antibacterial efficiency of plasma-treated cotton fabric

In this research, the effect of thymol on the antibacterial activity of cotton fabric when modified by low-temperature plasma was investigated. The modification consisted of plasma pre-functionalization followed by one-step wet treatment with thymol. Oxygen and nitrogen were used as the working gases in the plasma reactor. The results showed that plasma-treated samples can absorb more thymol than untreated samples. Thus, the antibacterial activity of the samples in this case, which was analyzed by the bacteria counting test, was increased considerably. Durability of the antibacterial property was also assessed. It was concluded that loading thymol on plasma-treated cotton fabric produced effective durable antibacterial textiles.     

Citronellol-Based Long-Lasting Antibacterial Cotton Fabrics without Bacterial Resistance

Antibacterial cotton helps prevent the growth and spread of harmful microorganisms, reduces the risk of infection, and has a prolonged service life by reducing bacterial degradation. However, most antibacterial agents used are toxic to humans and the environment. Citronellol-poly(N,N-dimethyl ethyl methacrylate) (CD), a highly effective antibacterial polymer, is synthesized from natural herbal essential oils (EOs). CD exhibited efficient, rapid bactericidal activity against Gram-positive, Gram-negative, and drug-resistant bacteria. Citronellol's environmental benignity makes CDs less hemolytic. Notably, negligible drug resistance developed after 15 bacterial subcultures. The CD-treated cotton fabric displayed better antibacterial performance than AAA-grade antibacterial fabric, even after repeated washing. This study extends the practical application of EOs to antibacterial surfaces and fabrics, which is promising for use in personal care products and medical settings.     

WPU/Cu2-XSe coated cotton fabrics for photothermal conversion and photochromic applications

Cellulose - Multifunctional cotton fabrics were fabricated by coating of anionic waterborne polyurethane (WPU)/Cu2-XSe. The surface morphology of WPU/Cu2-XSe coated cotton fabric was characterized...     

Antibacterial cotton fabric prepared by a “grafting to” strategy using a QAC copolymer

Quaternary ammonium compounds (QACs) have outstanding antimicrobial effect, but covalent immobilization of plentiful QAC onto cotton fiber surface to realize a durable function remains a challenge. Herein, a quaternary ammonium monomer, [2-(methacryloyloxy) ethyl] trimethylammonium chloride (DMC) was co-polymerized with methyl acrylate (MA) to prepare an antibacterial copolymer, poly(DMC-co-MA). To graft the copolymer with an improved grafting efficiency, cotton fabric was treated using carboxymethyl chitosan (CMC) to establish an amino-functionalized fiber surface first. This treatment allows the amidation reactions between the amino groups and the pendant ester groups in the poly(DMC-co-MA) to take place, achieving a durable anionic polymer coating onto the fiber surfaces with remarkably antibacterial effect. Characterization results indicated that when DMC/MA monomer ratio was 100:1, the resulting copolymer endows the modified cotton fabric with antibacterial capability that inactivates all Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Even after 50 laundering cycles, more than 98.0% of the antibacterial rate could still be retained. Moreover, the wearing comfort properties such as softness, water absorption and air permeability of the finishing cotton fabrics have been insignificantly changed by comparing to the untreated cotton fabric.

     

Functionalization of cotton fabrics with rutile TiO<Subscript>2</Subscript> nanoparticles: Applications for superhydrophobic,UV-shielding and self-cleaning properties

The superhydrophobic cotton fabrics were prepared by combining the coating of titanium dioxide (TiO₂) with the subsequent dodecafluoroheptyl-propyl-trimethoxysilane (DFTMS) modification. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) measurements revealed that the nanosized TiO₂ sphere consisted of granular rutile. The TiO₂ layer coated on the cotton altered both the surface roughness for enhancing the hydrophobicity and UV-shielding property. The cotton fabric samples showed excellent water repellency with a water contact angle as high as 162°. The UV-shielding was characterized by UV-vis spectrophotometry, and the results indicated that the fabrics could dramatically reduce the UV radiation. The photocatalytic progress showed that organic stains were successfully degraded by exposure of the stained fabric to UV radiation. Such multifunctional cotton fabrics may have potentials for commercial applications.     

Organic–inorganic hybrid silica film coated for improving resistance to capsicum oil on natural substances through sol–gel route

This study concerns the organic–inorganic hybrid coating of silica sol based on dyed cotton, silk and wool fabrics in order to increase the repellence to capsicum oil via adding methyltriethoxysilane, octyltriethoxysilane, hexadec-ltrimethoxysilane or tridecafluorooctyltriethoxysilane (FAS) in the inorganic silica sol. The dyed cotton fabric treated with hybrid silica sol doped with FAS (F-silica sol, FAS 4 %) presents oil-repellent capability, and the contact angles of capsicum oil on the treated cotton, silk and wool fabrics are 98.5°, 111.59° and 122.15°, respectively. A high FAS concentration (20 %) can improve the oil-repellent ability to 5 grades comparing to the untreated fabrics. The color strengths (K/S) of the coated fabrics change slightly, while the maximum absorption wavelengths of the coated fabrics are the same as the untreated fabrics. Although the drape coefficient of cotton fabric is increased to 54 % from 39 % after coated with F-silica sol, the effect is not significant. Compared to the weight gain rate of untreated cotton, silk and wool samples (1.89, 1.23 and 2.38 %), the weight gain rate of the cotton, silk and wool samples coated with F-silica sol are 6.99, 4.76 and 7.69 %, respectively. The calculated sol–gel weight gains (5.10, 3.53 and 5.31 %) of coated fabrics indicate that the silica coating is subsistent on the fiber surfaces.     

Flammability properties of PI fabric coated with montmorillonite

In this study, polyimide (PI) fabric was coated with montmorillonite (MMT) which performed as a kind of flame retardant. Thermogravimetric analysis showed that PI coated with MMT left as much as 69 % char after heating to 700 °C, about 15 % more than uncoated PI fabric. Cone calorimeter testing (heat flux: 60 kW m^?2) showed that coated fabric reduced the total heat release and showed resistance to degradation from direct flame. Post-burn residues of samples were examined with SEM and revealed that the weave structure and fiber shape in all coated fabrics were preserved. In addition, heat-insulting test showed that the temperature difference of coated PI could reach 400 °C after 10 min at 800 °C. These results demonstrate that MMT coating is relatively effective for improving flame-retardant behavior to PI fabric.     

Multifunctional water and oil repellent and antimicrobial properties of finished cotton: influence of sol–gel finishing procedure

Cotton fabric was treated with two-component water- and oil-repellent antimicrobial coatings consisting of the commercial aqueous organic–inorganic hybrid precursors fluoroalkyl-functional siloxane (FAS) and 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride (SiQAC) of different concentrations. Two different application procedures were used: a one-step treatment (S1) by a sol mixture consisting of both precursors [coating FAS-SiQAC (S1)] and a two-step treatment (S2) by SiQAC sol and then FAS sol [coating SiQAC + FAS (S2)]. The functional properties of the coatings were determined from liquid contact angle measurements and antimicrobial activity, as well as FTIR and XPS analyses. Although both treatments gave the cotton fabric superhydrophobic and oleophobic properties at a sufficient sol concentration, procedure S1 was found to be more effective than procedure S2. The antibacterial properties of the SiQAC + FAS (S2) coating were superior to those of the FAS-SiQAC (S1) coating. For both two-component coatings, the active bacteriostatic activity of SiQAC was enhanced by the passive antibacterial activity of FAS. Two-component coatings did not provide significant antifungal protection. Repetitive washing gradually deteriorated both coatings but the coating applied by procedure S2 seemed to be slightly more durable than that applied by S1. The two-component coatings caused an increase in the flexibility and a slight decrease in the fabric breaking strength and air permeability of the cotton sample.