Automated Trimethyl Sulfonium Hydroxide Derivatization Method for High-Throughput Fatty Acid Profiling by Gas Chromatography–Mass Spectrometry

Fatty acid profiling on gas chromatography–mass spectrometry (GC–MS) platforms is typically performed offline by manually derivatizing and analyzing small batches of samples. A GC–MS system with a fully integrated robotic autosampler can significantly improve sample handling, standardize data collection, and reduce the total hands-on time required for sample analysis. In this study, we report an optimized high-throughput GC–MS-based methodology that utilizes trimethyl sulfonium hydroxide (TMSH) as a derivatization reagent to convert fatty acids into fatty acid methyl esters. An automated online derivatization method was developed, in which the robotic autosampler derivatizes each sample individually and injects it into the GC–MS system in a high-throughput manner. This study investigated the robustness of automated TMSH derivatization by comparing fatty acid standards and lipid extracts, derivatized manually in batches and online automatically from four biological matrices. Automated derivatization improved reproducibility in 19 of 33 fatty acid standards, with nearly half of the 33 confirmed fatty acids in biological samples demonstrating improved reproducibility when compared to manually derivatized samples. In summary, we show that the online TMSH-based derivatization methodology is ideal for high-throughput fatty acid analysis, allowing rapid and efficient fatty acid profiling, with reduced sample handling, faster data acquisition, and, ultimately, improved data reproducibility.     

Gas Chromatography–Mass Spectrometry Quantification of 1,1-Dimethylhydrazine Transformation Products in Aqueous Solutions: Accelerated Water Sample Preparation

The use of highly toxic rocket fuel based on 1,1-dimethylhydrazine (UDMH) in many types of carrier rockets poses a threat to environment and human health associated with an ingress of UDMH into wastewater and natural reservoirs and its transformation with the formation of numerous toxic nitrogen-containing products. Their GC-MS quantification in aqueous samples requires matrix change and is challenging due to high polarity of analytes. To overcome this problem, accelerated water sample preparation (AWASP) based on the complete removal of water with anhydrous sodium sulfate and transferring analytes into dichloromethane was used. Twenty-nine UDMH transformation products including both the acyclic and heterocyclic compounds of various classes were chosen as target analytes. AWASP ensured attaining near quantitative extraction of 23 compounds with sample preparation procedure duration of no more than 5 min. Combination of AWASP with gas chromatography–mass spectrometry and using pyridine-d₅ as an internal standard allowed for developing the rapid, simple, and low-cost method for simultaneous quantification of UDMH transformation products with detection limits of 1–5 μg L⁻¹ and linear concentration range covering 4 orders of magnitude. The method has been validated and successfully tested in the analysis of aqueous solutions of rocket fuel subjected to oxidation with atmospheric oxygen, as well as pyrolytic gasification in supercritical water modelling wastewater from carrier rockets launch sites.     

Nontargeted Screening Using Gas Chromatography–Atmospheric Pressure Ionization Mass Spectrometry: Recent Trends and Emerging Potential

Gas chromatography–high-resolution mass spectrometry (GC–HRMS) is a powerful nontargeted screening technique that promises to accelerate the identification of environmental pollutants. Currently, most GC–HRMS instruments are equipped with electron ionization (EI), but atmospheric pressure ionization (API) ion sources have attracted renewed interest because: (i) collisional cooling at atmospheric pressure minimizes fragmentation, resulting in an increased yield of molecular ions for elemental composition determination and improved detection limits; (ii) a wide range of sophisticated tandem (ion mobility) mass spectrometers can be easily adapted for operation with GC–API; and (iii) the conditions of an atmospheric pressure ion source can promote structure diagnostic ion–molecule reactions that are otherwise difficult to perform using conventional GC–MS instrumentation. This literature review addresses the merits of GC–API for nontargeted screening while summarizing recent applications using various GC–API techniques. One perceived drawback of GC–API is the paucity of spectral libraries that can be used to guide structure elucidation. Herein, novel data acquisition, deconvolution and spectral prediction tools will be reviewed. With continued development, it is anticipated that API may eventually supplant EI as the de facto GC–MS ion source used to identify unknowns.     

Comparing Efficiency of Lysis Buffer Solutions and Sample Preparation Methods for Liquid Chromatography–Mass Spectrometry Analysis of Human Cells and Plasma

The use of a proper sample processing methodology for maximum proteome coverage and high-quality quantitative data is an important choice to make before initiating a liquid chromatography–mass spectrometry (LC–MS)-based proteomics study. Popular sample processing workflows for proteomics involve in-solution proteome digestion and single-pot, solid-phase-enhanced sample preparation (SP3). We tested them on both HeLa cells and human plasma samples, using lysis buffers containing SDS, or guanidinium hydrochloride. We also studied the effect of using commercially available depletion mini spin columns before SP3, to increase proteome coverage in human plasma samples. Our results show that the SP3 protocol, using either buffer, achieves the highest number of quantified proteins in both the HeLa cells and plasma samples. Moreover, the use of depletion mini spin columns before SP3 results in a two-fold increase of quantified plasma proteins. With additional fractionation, we quantified nearly 1400 proteins, and examined lower-abundance proteins involved in neurodegenerative pathways and mitochondrial metabolism. Therefore, we recommend the use of the SP3 methodology for biological sample processing, including those after depletion of high-abundance plasma proteins.     

Comparative Analysis of Acanthopanacis Cortex and Periplocae Cortex Using an Electronic Nose and Gas Chromatography–Mass Spectrometry Coupled with Multivariate Statistical Analysis

Chinese Herbal Medicines (CHMs) can be identified by experts according to their odors. However, the identification of these medicines is subjective and requires long-term experience. The samples of Acanthopanacis Cortex and Periplocae Cortex used were dried cortexes, which are often confused in the market due to their similar appearance, but their chemical composition and odor are different. The clinical use of the two herbs is different, but the phenomenon of being confused with each other often occurs. Therefore, we used an electronic nose (E-nose) to explore the differences in odor information between the two species for fast and robust discrimination, in order to provide a scientific basis for avoiding confusion and misuse in the process of production, circulation and clinical use. In this study, the odor and volatile components of these two medicinal materials were detected by the E-nose and by gas chromatography–mass spectrometry (GC-MS), respectively. An E-nose combined with pattern analysis methods such as principal component analysis (PCA) and partial least squares (PLS) was used to discriminate the cortex samples. The E-nose was used to determine the odors of the samples and enable rapid differentiation of Acanthopanacis Cortex and Periplocae Cortex. GC-MS was utilized to reveal the differences between the volatile constituents of Acanthopanacis Cortex and Periplocae Cortex. In all, 82 components including 9 co-contained components were extracted by chromatographic peak integration and matching, and 24 constituents could be used as chemical markers to distinguish these two species. The E-nose detection technology is able to discriminate between Acanthopanacis Cortex and Periplocae Cortex, with GC-MS providing support to determine the material basis of the E-nose sensors’ response. The proposed method is rapid, simple, eco-friendly and can successfully differentiate these two medicinal materials by their odors. It can be applied to quality control links such as online detection, and also provide reference for the establishment of other rapid detection methods. The further development and utilization of this technology is conducive to the further supervision of the quality of CHMs and the healthy development of the industry.     

Comprehensive Two-Dimensional Gas Chromatography–Mass Spectrometry Analysis of Exhaled Breath Compounds after Whole Grain Diets

Exhaled breath is a potential noninvasive matrix to give new information about metabolic effects of diets. In this pilot study, non-targeted analysis of exhaled breath volatile organic compounds (VOCs) was made by comprehensive two-dimensional gas chromatography–mass spectrometry (GCxGC-MS) to explore compounds relating to whole grain (WG) diets. Nine healthy subjects participated in the dietary intervention with parallel crossover design, consisting of two high-fiber diets containing whole grain rye bread (WGR) or whole grain wheat bread (WGW) and 1-week control diets with refined wheat bread (WW) before both diet periods. Large interindividual differences were detected in the VOC composition. About 260 VOCs were detected from exhaled breath samples, in which 40 of the compounds were present in more than half of the samples. Various derivatives of benzoic acid and phenolic compounds, as well as some furanones existed in exhaled breath samples only after the WG diets, making them interesting compounds to study further.     

Simultaneous Analysis for Quality Control of Traditional Herbal Medicine,Gungha-Tang,Using Liquid Chromatography–Tandem Mass Spectrometry

Gungha-tang (GHT), a traditional herbal medicine, consists of nine medicinal herbs (Cnidii Rhizoma, Pinelliae Tuber, Poria Sclerotium, Citri Unshius Pericarpium, Citri Unshius Pericarpium Immaturus, Aurantii Fructus Immaturus, Atracylodis Rhizoma Alba, Glycyrrhizae Radix et Rhizoma, and Zingiberis Rhizoma Recens). It has been used for various diseases caused by phlegm. This study aimed to develop and verify the simultaneous liquid chromatography–tandem mass spectrometry (LC–MS/MS) analysis method, using nine marker components (liquiritin apioside, neoeriocitrin, narirutin, naringin, hesperidin, neohesperidin, liquiritigenin, glycyrrhizin, and 6-shogaol) for quality control of GHT. LC–MS/MS analysis was conducted using a Waters TQ-XS system. All marker analytes were separated on a Waters Acquity UPLC BEH C₁₈ column (2.1 × 100 mm, 1.7 μm) using gradient elution with a distilled water solution (containing 5 mM ammonium formate and 0.1% [v/v] formic acid)–acetonitrile mobile phase. LC–MS/MS multiple reaction monitoring (MRM) analysis was carried out in negative and positive ion modes of an electrospray ionization source. The developed LC–MS/MS MRM method was validated by examining the linearity, limits of detection and quantification, recovery, and precision. LOD and LOQ values of nine markers were calculated as 0.02–8.33 ng/mL and 0.05–25.00 ng/mL. The recovery was determined to be 89.00–118.08% and precision was assessed with a coefficient of variation value of 1.74–8.64%. In the established LC–MS/MS MRM method, all markers in GHT samples were detected at 0.003–16.157 mg/g. Information gathered during the development and verification of the LC–MS/MS method will be useful for the quality assessment of GHT and other herbal medicines.     

Elucidation of Analytical–Compositional Fingerprinting of Three Different Species of Chili Pepper by Using Headspace Solid-Phase Microextraction Coupled with Gas Chromatography–Mass Spectrometry Analysis,and Sensory Profile Evaluation

The aim of the present study was to determine the volatile compounds of three different species of chili peppers, using solid-phase microextraction (SPME) methods in combination with gas chromatography–mass spectrometry (GC-MS). The detection of marker aroma compounds could be used as a parameter to differentiate between species of chili peppers for their detection and traceability in chili pepper food. The sensorial contribution was also investigated to identify the predominant notes in each species and to evaluate how they can influence the overall aroma. Three different pepper species belonging to the Capsicum genus were analyzed: Chinense, Annuum, and Baccatum. A total of 269 volatile compounds were identified in these species of chili peppers. The Capsicum annum species were characterized by a high number of acids and ketones, while the Capsicum chinense and Capsicum baccatum were characterized by esters and aldehydes, respectively. The volatile profile of extra virgin olive oils (EVOOs) flavored with chili peppers was also investigated, and principal component analysis (PCA) and hierarchical cluster analysis (HCA) of the volatile profiles were demonstrated to be a powerful analytical strategy for building a model that highlights the potential of a volatile characterization approach for use in evaluating food traceability and authenticity.     

Thorough Investigation of the Phenolic Profile of Reputable Greek Honey Varieties: Varietal Discrimination and Floral Markers Identification Using Liquid Chromatography–High-Resolution Mass Spectrometry

Honey is a highly consumed commodity due to its potential health benefits upon certain consumption, resulting in a high market price. This fact indicates the need to protect honey from fraudulent acts by delivering comprehensive analytical methodologies. In this study, targeted, suspect and non-targeted metabolomic workflows were applied to identify botanical origin markers of Greek honey. Blossom honey samples (n = 62) and the unifloral fir (n = 10), oak (n = 24), pine (n = 39) and thyme (n = 34) honeys were analyzed using an ultra-high-performance liquid chromatography hybrid quadrupole time-of-flight mass spectrometry (UHPLC-q-TOF-MS) system. Several potential authenticity markers were revealed from the application of different metabolomic workflows. In detail, based on quantitative targeted analysis, three blossom honey markers were found, namely, galangin, pinocembrin and chrysin, while gallic acid concentration was found to be significantly higher in oak honey. Using suspect screening workflow, 12 additional bioactive compounds were identified and semi-quantified, achieving comprehensive metabolomic honey characterization. Lastly, by combining non-targeted screening with advanced chemometrics, it was possible to discriminate thyme from blossom honey and develop binary discriminatory models with high predictive power. In conclusion, a holistic approach to assessing the botanical origin of Greek honey is presented, highlighting the complementarity of the three applied metabolomic approaches.     

Multi-Class Procedure for Analysis of 50 Antibacterial Compounds in Eggshells Using Ultra-High-Performance Liquid Chromatography–Tandem Mass Spectrometry

In this work, for the first time, Ultra-High-Performance Liquid Chromatography–Tandem Mass Spectrometry (UHPLC–MS/MS) method was developed for qualitative and quantitative analysis of veterinary antibiotics (cephalosporins, diaminopyrimidines, fluoro(quinolones), lincosamides, macrolides, penicillins, pleuromutilins, sulfonamides, tetracyclines, and sulfones) in hen eggshells. The sample preparation method is based on a liquid–liquid extraction with a mixture of metaphosphoric acid, ascorbic acid, EDTA disodium salt dihydrate, and acetonitrile. The chromatographic separation was performed on Luna^® Omega Polar C18 10 column in gradient elution mode and quantitated in an 8 min run. Validation such as linearity, selectivity, precision, recovery, matrix effect, limit of quantification (LOQ), and limit of detection (LOD) was found to be within the acceptance criteria of the validation guidelines of the Commission Decision 2002/657/EC and EUR 28099 EN. Average recoveries ranged from 81–120%. The calculated LOQ values ranged from 1 to 10 µg/kg, the LOD values ranged from 0.3 to 4.0 µg/kg, depending on analyte. The developed method has been successfully applied to the determination of antibacterial compounds in hen eggshell samples obtained from different sources. The results revealed that enrofloxacin, lincomycin, doxycycline, and oxytetracycline were detected in hen eggshell samples.     

An Efficient Solid-Phase Microextraction–Gas Chromatography–Mass Spectrometry Method for the Analysis of Methyl Farnesoate Released in Growth Medium by Daphnia pulex

Methyl farnesoate (MF), a juvenile hormone, can influence phenotypic traits and stimulates male production in daphnids. MF is produced endogenously in response to stressful conditions, but it is not known whether this hormone can also be released into the environment to mediate stress signaling. In the present study, for the first time, a reliable solid-phase microextraction–gas chromatography–mass spectrometry (SPME-GC-MS) method was developed and validated for the ultra-trace analysis of MF released in growth medium by Daphnia pulex maintained in presence of crowding w/o MK801, a putative upstream inhibitor of MF endogenous production. Two different clonal lineages, I and S clones, which differ in the sensitivity to the stimuli leading to male production, were also compared. A detection limit of 1.3 ng/L was achieved, along with good precision and trueness, thus enabling the quantitation of MF at ultra-trace level. The achieved results demonstrated the release of MF by both clones at the 20 ng/L level in control conditions, whereas a significant decrease in the presence of crowding was assessed. As expected, a further reduction was obtained in the presence of MK801. These findings strengthen the link between environmental stimuli and the MF signaling pathway. Daphnia pulex, by releasing the juvenile hormone MF in the medium, could regulate population dynamics by means of an autoregulatory feedback loop that controls the intra- and extra-individual-level release of MF produced by endogenous biosynthesis.     

Comparative Analysis of Volatile Constituents in Root Tuber and Rhizome of Curcuma longa L. Using Fingerprints and Chemometrics Approaches on Gas Chromatography–Mass Spectrometry

The root tuber and rhizome of Curcuma longa L., abbreviated, respectively, as RCL and RHCL, are used as different medicines in China. In this work, volatile oils were extracted from RCL and RHCL. Then, gas chromatography–mass spectrometry (GC–MS) was used for RCL and RHCL volatile oils analysis, and 45 compounds were identified. The dominant constituents both in volatile oils of RCL and RHCL were turmerone, (−)-zingiberene, and β-turmerone, which covered more than 60% of the total area. The chromatographic fingerprint similarities between RCL and RHCL were not less than 0.943, indicating that their main chemical compositions were similar. However, there were also some compounds that were varied in RCL and RHCL. Based on the peak area ratio of 45 compounds, the RCL and RHCL samples were separated into principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA). Then, 20 compounds with a variable importance for the projection (VIP) value of more than 1 were the high potential contributors for RCL and RHCL differences. Furthermore, ferric ion-reducing antioxidant power (FRAP) assay results demonstrated that the volatile oils of RCL and RHCL had antioxidant activities. This study provided the material basis for the research of volatile components in RCL and RHCL and contributed to their further pharmacological research and quality control.     

Headspace Solid-Phase Microextraction/Gas Chromatography–Mass Spectrometry for the Determination of 2-Nonenal and Its Application to Body Odor Analysis

The odors and emanations released from the human body can provide important information about the health status of individuals and the presence or absence of diseases. Since these components often emanate from the body surface in very small quantities, a simple sampling and sensitive analytical method is required. In this study, we developed a non-invasive analytical method for the measurement of the body odor component 2-nonenal by headspace solid-phase microextraction coupled with gas chromatography–mass spectrometry by selective ion monitoring. Using a StableFlex PDMS/DVB fiber, 2-nonenal was efficiently extracted and enriched by fiber exposition at 50 °C for 45 min and was separated within 10 min using a DB−1 capillary column. Body odor sample was easily collected by gauze wiping. The limit of detection of 2-nonenal collected in gauze was 22 pg (S/N = 3), and the linearity was obtained in the range of 1–50 ng with a correlation coefficient of 0.991. The method successfully analyzed 2-nonenal in skin emissions and secretions and was applied to the analysis of body odor changes in various lifestyles, including the use of cosmetics, food intake, cigarette smoking, and stress load.     

Quantitative Determination and Environmental Risk Assessment of 102 Chemicals of Emerging Concern in Wastewater-Impacted Rivers Using Rapid Direct-Injection Liquid Chromatography—Tandem Mass Spectrometry

The rapid source identification and environmental risk assessment (ERA) of hundreds of chemicals of emerging concern (CECs) in river water represent a significant analytical challenge. Herein, a potential solution involving a rapid direct-injection liquid chromatography–tandem mass spectrometry method for the quantitative determination of 102 CECs (151 qualitatively) in river water is presented and applied across six rivers in Germany and Switzerland at high spatial resolution. The method required an injection volume of only 10 µL of filtered sample, with a runtime of 5.5 min including re-equilibration with >10 datapoints per peak per transition (mostly 2 per compound), and 36 stable isotope-labelled standards. Performance was excellent from the low ng/L to µg/L concentration level, with 260 injections possible in any 24 h period. The method was applied in three separate campaigns focusing on the ERA of rivers impacted by wastewater effluent discharges (1 urban area in the Basel city region with 4 rivers, as well as 1 semi-rural and 1 rural area, each focusing on 1 river). Between 25 and 40 compounds were quantified directly in each campaign, and in all cases small tributary rivers showed higher CEC concentrations (e.g., up to ~4000 ng/L in total in the R. Schwarzach, Bavaria, Germany). The source of selected CECs could also be identified and differentiated from other sources at pre- and post- wastewater treatment plant effluent discharge points, as well as the effect of dilution downstream, which occurred over very short distances in all cases. Lastly, ERA for 41 CECs was performed at specific impacted sites, with risk quotients (RQs) at 1 or more sites estimated as high risk (RQ > 10) for 1 pharmaceutical (diclofenac), medium risk (RQ of 1–10) for 3 CECs (carbamazepine, venlafaxine, and sulfamethoxazole), and low risk (RQ = 0.1–1.0) for 7 CECs (i.e., RQ > 0.1 for 11 CECs in total). The application of high-throughput methods like this could enable a better understanding of the risks of CECs, especially in low flow/volume tributary rivers at scale and with high resolution.     

Rapid Simultaneous Quantification of 1-Formyl-2,2-Dimethylhydrazine and Dimethylurea Isomers in Environmental Samples by Supercritical Fluid Chromatography–Tandem Mass Spectrometry

When released to the environment, the rocket fuel unsymmetrical dimethylhydrazine (UDMH) undergoes oxidative transformations, resulting in the formation of an extremely large number of nitrogen-containing transformation products, including isomeric compounds which are difficult to discriminate by common chromatography techniques. In the present work, supercritical fluid chromatography–tandem mass spectrometry (SFC-MS/MS) was proposed for resolving the problem of fast separation and simultaneous quantification of 1-formyl-2,2-dimethylhydrazine (FADMH) as one of the major UDMH transformation products, and its isomers—1,1-dimethylurea (UDMU) and 1,2-dimethylurea (SDMU). 2-Ethylpyridine stationary phase provided baseline separation of analytes in 1.5 min without the distortion of the chromatographic peaks. Optimization of SFC separation and MS/MS detection conditions allowed for the development of rapid, sensitive, and “green” method for the simultaneous determination of FADMH, UDMU, and SDMU in environmental samples with LOQs of 1–10 µg L⁻¹ and linear range covering three orders of magnitude. The method was validated and successfully tested on the real extracts of peaty and sandy soils polluted with rocket fuel and UDMH oxidation products. It was shown that both UDMU and SDMU are formed in noticeable amounts during UDMH oxidation. Despite relatively low toxicity, UDMU can be considered one of the major UDMH transformation products and a potential marker of soil pollution with toxic rocket fuel.     

Development and Validation of Multi-Residue Method for Drugs Analysis in Human Feces by Liquid Chromatography–Tandem Mass Spectrometry

The use of veterinary drugs in animal production is a common practice to secure animal and human health. However, residues of administrated drugs could be present in animal food products. Levels of drugs in food of animal origin are regulated within the European Union. In recent years, residues have been detected not only in food, but also in the environmental elements such as water or soil, meaning that humans are involuntarily exposed to these substances. This article presents a multiclass method for the analysis of various therapeutic groups of pharmaceuticals in human feces. Pharmaceuticals are extracted from feces with an acid extraction solvent, and after filtration the extract was analyzed by HPLC–MS/MS. A limit of detection of 10 ng/g was achieved for 9 pharmaceuticals, with linearity over 0.99 and repeatability and reproducibility lower than 20%. The method was satisfactorily applied in 25 feces samples of individuals that had declared not to be under medical treatment for the last two months. Results indicate the presence of six different compounds at concentration between 10 and 456 ng/g. This preliminary study showed the involuntary exposure of human gut microbiota to active substances such as pharmaceuticals     

Simultaneous Analysis of Fenpropimorph and Fenpropimorph Acid in Six Different Livestock Products Using a Single-Sample Preparation Method Followed by Liquid Chromatography–Tandem Mass Spectrometry

Pesticides in livestock products must be measured to ensure food safety. We developed a single-sample preparation method followed by liquid chromatography–tandem mass spectrometry (LC-MS/MS) for simultaneous determination of fenpropimorph and fenpropimorph acid in six different livestock products. The extraction method was a modification of the quick, easy, cheap, effective, rugged, and safe (QuEChERS) method and was validated according to the CODEX guidelines. The matrix-matched calibration curves for fenpropimorph and fenpropimorph acid exhibited good linearity, with coefficients of determination (R² values) higher than 0.998. The limit of detection (LOD) and the limit of quantitation (LOQ) were 1.25 and 5.0 µg kg⁻¹, respectively. The average recovery values ranged from 61.5% to 97.1% for samples fortified to the LOQ, 2 × LOQ, and 10 × LOQ. The method fully complied with the CODEX guidelines and was successfully applied to real samples obtained from domestic markets.     

Analysis of 3-Methoxy-4-Hydroxyphenylglycol in Human Cerebrospinal Fluid by Gas Chromatography Mass Spectrometry and Electrochemical Detection Liquid Chromatography

Abstract

Gas chromatography mass spectrometry [GCMS] and liquid chromatography with electrochemical detection [LCEC] have been compared in simultaneous determination of 3-methoxy-4-hydroxy-phenylglycol [MHPG] in human cerebrospinal fluid [CSF]. Both free and sulphate conjugated MHPG have been measured in these samples. By Spearman Rank Correlation non-parametric analysis both instrumental techniques related significantly for all quantitated samples.     

Method of Glyphosate,AMPA, and Glufosinate Ammonium Determination in Beebread by Liquid Chromatography—Tandem Mass Spectrometry after Molecularly Imprinted Solid-Phase Extraction

The aim of this study was to develop a method for the determination of glyphosate, its metabolite aminomethylphosphonic acid (AMPA), and glufosinate ammonium residues in beebread samples, which could then be used to assess bees’ exposure to their residues. The complexity of beebread’s matrix, combined with the specific properties of glyphosate itself, required careful selection and optimization of each analysis step. The use of molecularly imprinted solid-phase extraction (MIP-SPE) by AFFINIMIP glyphosate as an initial clean-up step significantly eliminated matrix components and ensured an efficient derivatization step. Colorless beebread extracts were derivatized by the addition of 9-fluorenylmethyl chloroformate (FMOC-Cl). After derivatization, in order to remove FMOC-OH and residual borate buffer, a solid-phase extraction (SPE) clean-up step using Oasis HLB was carried out. Instrumental analysis was performed by liquid chromatography coupled with tandem mass spectrometry (LC–MS/MS). The method was validated according to the SANTE/11312/2021 guideline at concentrations of 5, 10, and 100 µg/kg, and satisfactory recovery (trueness) values (76–111%) and precision (RSDr) ≤ 18% were obtained. The limit of quantification (LOQ) was 5 µg/kg for AMPA and glufosinate ammonium and 10 µg/kg for glyphosate. The method was positively verified by the international proficiency test. Analysis of beebread samples showed the method’s usefulness in practice. The developed method could be a reliable tool for the assessment of beebread’s contamination with residues of glyphosate, its metabolite AMPA, and glufosinate ammonium.     

Stable Carbon Isotope Analysis of Hexachlorocyclohexanes by Liquid–Liquid Extraction Gas Chromatography Isotope Ratio Mass Spectrometry: Method Evaluation and Applications

Compound specific isotope analysis (CSIA) and enantiomer specific isotope analysis (ESIA) are powerful tools for assessing the fate of hexachlorocyclohexanes (HCHs) in the environment. However, there is no systematic study on the CSIA and ESIA analysis test methods of the carbon isotopes of HCHs in water and soil environments, in particular the isotope fractionation in the pre-concentration process. We endeavored to test the compatibility of CSIA and ESIA with the liquid–liquid extraction method of HCHs in water. The results showed that there were negligible changes in the δ¹³C of HCHs after extraction, indicating that liquid–liquid extraction can be used as a pre-concentration method for the determination of δ¹³C of HCHs in water. The optimized method was validated and then applied to differentiate three HCHs from different manufacturers, to identify in situ degradation of HCHs of groundwater from a contaminated site and to resolve the carbon isotope fractionation occurring in the α-HCH oxidation by CaO₂/Fe(II) Fenton system. The results showed that the same reagents from different manufacturers have different carbon isotope compositions, and different isomers from the same manufacturer also have different isotope compositions, showing useful evidence in identifying the source of HCHs. The more enriched δ¹³C in the down-gradient wells indicated that HCHs have undergone biodegradation or/and chemical reactions in the groundwater system of the site. Carbon isotopic enrichment factors (ε_C) of −1.90 ± 0.10‰ were obtained in the oxidation process. Hence, the method validated in this study has great potential as a method for identifying the degradation of HCHs in a water environment.