Preparation of supermacroporous cryogels with improved mechanical strength for efficient purification of lysozyme from chicken egg white

A novel, facile, and robust strategy was proposed to increase the pore size and mechanical strength of cryogels. By mixing the monomers of acrylamide and 2‐hydroxyethyl methacrylate as the precursor, a monolithic copolymer cryogel with large interconnected pores and thick pore walls was prepared. Hydrogen bonding between the two monomers contributed to the entanglement and aggregation of the copolymers, thickening the pore walls and resulting in larger pore sizes. Analysis via mercury porosimetry demonstrated that the interconnected pore diameter of the copolymer cryogel ranged from 10‐350 µm, which was far larger than that of the cryogels from one monomer (10‐50 µm). Additionally, the thicker pore walls of the copolymer cryogel improved its mechanical strength. Affinity cryogels were prepared through covalent immobilization using Tris(hydroxymethyl)aminomethane as a coupling agent, and the affinity binding of lysozymes on Tris‐cryogel was evaluated by the Langmuir isothermal adsorption with the maximum adsorption capacity of 360 mg/g. Compared with that of the Tris‐cryogels produced from one monomer, the copolymer Tris‐cryogel exhibited higher adsorption capacity and lysozyme purity, when the chicken egg white solution flowed solely driven by gravity. This work provides a new avenue for designing and developing supermacroporous cryogels for bioseparation.     

Development and screening of epoxy‐spacer‐phage cryogels for affinity chromatography: Enhancing the binding capacity

Macroporous epoxy cryogels can be used as an alternative for classical matrices in affinity chromatography. Due to the structural properties of cryogels, with pores of up to 100 μm, crude samples can be processed at high speed without previous manipulations such as clarification or centrifugation. Also, we previously used a peptide‐expressing M13 bacteriophage as an affinity ligand. These ligands show high specificity toward the target to be purified. Combination of both, leads to a relative cost‐effective one‐step chromatographic set‐up delivering a high purity sample (>95%), however, so far with limited capacity. To increase the binding capacity of the affinity columns, we now inserted spacers between the chromatographic matrix and the phage ligand. Both linear spacers, di‐amino‐alkanes (C₂–C₁₀), and branched polyethyleneimine spacers with different molecular weights (800 Da–10 kDa) were analyzed. Two types of peptide expressing phage ligands, a linear 15‐mer and a cyclic 6‐mer, were used for screening. Up to a tenfold increase in binding capacity was observed depending on the combination of phage ligand and spacer type.     

Monolithic macroporous catalysts--a new route for miniaturization of water-gas shift reactor

Monolithic macroporous Pt/CeO2/Al2O3 catalysts were prepared using concentrated emulsions synthesis route, and the obtained samples were characterized with SEM, TG, TEM, XRD and TPR techniques. These monolithic catalysts were applied to water gas shift (WGS) reaction in reformed gases. The SEM and TEM results indicated that the monoliths possessed macroporosity, and that the platinum particles homogeneously dispersed on the supports with the particle size in the range of 1−2 nm. The reducibility of the catalysts was characterized by TPR method, and it was shown that the monolithic PtOx/CeO2/Al2O3 exhibited the similar reducibility property to that of the particle PtOx/CeO2 reported in literatures. The CO conversion over the monolithic catalysts is higher than that over micro-reactor catalysts for WGS reaction in the reformed gases conditions, indicating that the monolithic macroporous catalysts is a potential new route for miniaturization of WGS reactor.     

Double emulsion droplets as microreactors for synthesis of magnetic macroporous polymer beads

An easy method is presented to fabricate monodisperse magnetic macroporous polymer beads（MMPBs）. Waterin-oil high internal phase emulsion（HIPE） is prepared by emulsifying aqueous iron ions solution in an oil phase containing monomers. The HIPE is introduced into a simple microfluidic device to fabricate monodisperse（water-in-oil）-in-water double emulsion droplets. The droplets serve as microreactors to synthesize Fe3O4 nanoparticles and are on-line polymerized to form MMPBs. The prepared MMPBs display uniform size, interconnected porous structure, superparamagnetic behavior and uniform distribution of Fe3O4 in polymer matrix. The MMPBs are characterized by scanning electron microscopy（SEM）, Fourier transform infrared spectroscopy（FTIR）, X-ray diffraction（XRD）, transmission electron microscopy（TEM）, vibrating sample magnetometry（VSM）. We believe that this method is a universal technique in preparing macroporous nanocomposite beads.     

Nanocelluloses: a new family of nature-based materials

Cellulose fibrils with widths in the nanometer range are nature-based materials with unique and potentially useful features. Most importantly, these novel nanocelluloses open up the strongly expanding fields of sustainable materials and nanocomposites, as well as medical and life-science devices, to the natural polymer cellulose. The nanodimensions of the structural elements result in a high surface area and hence the powerful interaction of these celluloses with surrounding species, such as water, organic and polymeric compounds, nanoparticles, and living cells. This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.     

Preparation of macroporous functionalized polymer beads by a multistep polymerization and their application in zirconocene catalysts for ethylene polymerization

Macroporous functionalized polymer beads of poly(4‐vinylpyridine‐co‐1,4‐divinylbenzene) [P(VPy‐co‐DVB)] were prepared by a multistep polymerization, including a polystyrene (PS) shape template by emulsifier‐free emulsion polymerization, linear PS seeds by staged template suspension polymerization, and macroporous functionalized polymer beads of P(VPy‐co‐DVB) by multistep seeded polymerization. The polymer beads, having a cellular texture, were made of many small, spherical particles. The bead size was 10–50 μm, and the pore size was 0.1–1.5 μm. The polymer beads were used as supports for zirconocene catalysts in ethylene polymerization. They were very different from traditional polymer supports. The polymer beads could be exfoliated to yield many spherical particles dispersed in the resulting polyethylene particles during ethylene polymerization. The influence of the polymer beads on the catalytic behavior of the supported catalyst and morphology of the resulting polyethylene was investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 873–880, 2003     

Preparations and properties of uniform size macroporous polymer beads prepared by two-step swelling and polymerization method utilizing divinyl succinate or divinyl adipate as a crosslinking agent

Uniform size macroporous polymer beads were prepared through a typical two-step swelling and polymerization method utilizing divinyl succinate or divinyl adipate as well as ethylene dimethacrylate as crosslinking agents. Stable macroporous polymer beads with good size monodispersity and a slightly nonspherical shape were obtained by homopolymerization of divinyl succinate in cyclohexanol as porogen. BET measurements indicated that the beads prepared by homopolymerization of divinyl succinate and copolymerization of divinyl succinate with vinyl p-tert-butylbenzoate, as well as homopolymerization of ethylene dimethacrylate had relatively large specific surface area. In contrast, copolymerization of divinyl succinate with methyl methacrylate afforded beads having a very small specific surface area. Similarly, all the beads prepared using divinyl adipate had very small specific surface area, while size exclusion chromatography in tetrahydrofuran suggested that these beads acquired a porous structure as a result of swelling. When used as packing materials for high-performance liquid chromatography, the beads prepared with divinyl adipate showed unexpected molecular recognition toward flat solutes in reversed phase liquid chromatography in contrast to those prepared with ethylene dimethacrylate. Copolymerizations with methyl methacrylate led to a decrease in molecular recognition, while those with vinyl p-tert-butylbenzoate enhanced the selectivity. © 1996 John Wiley & Sons, Inc.     

新型大孔结构重油加氢催化剂的制备、表征与评价

将聚苯乙烯（PS）颗粒模板加入到铝溶胶中,经干燥、煅烧除去PS模板制备了大孔氧化铝载体;采用低温N₂吸附 脱附和SEM对合成Al₂O₃的孔结构进行了表征;将Co-Mo活性组分担载在大孔氧化铝载体上制得重油加氢催化剂,并以大港焦化蜡油为原料在固定床高压微反装置上对合成的催化剂进行活性评价。实验表明,加入PS模板后,Al2O3的比表面积增加了41.5m²/g,孔体积增加了0.35cm³/g;加氢脱硫活性提高了12%,脱氮活性提高了22%。     

Preparation and functionalization of reactive monodisperse macroporous poly(chloromethylstyrene-co-styrene-co-divinylbenzene) beads by a staged templated suspension polymerization

Reactive monodisperse porous poly(chloromethylstyrene-co-styrene-co-divinylbenzene) beads have been prepared by a staged templated suspension polymerization method with different concentrations of linear polystyrene porogen and chloromethylstyrene in the polymerization mixture. The presence of a small amount of linear polystyrene in the polymerization mixture leads to a dramatic increase in both the pore size and the pore volume of the resulting beads. In contrast, addition of chloromethylstyrene leads to lower surface areas and smoother surfaces due to the reduced compatibility between the polystyrene porogen and the newly formed crosslinked chains. The modification of chloromethylstyrene beads by Gabriel synthesis to obtain aminated beads has also been studied. The final number of primary amino groups is related to the starting concentration of functional benzyl chloride moieties rather than to the porous properties. Both π-basic and π-acidic type chiral selectors, (R)-1-(1-naphthyl)-ethylamine and (R)-N-(3,5-dinitrobenzoyl)phenylglycine, respectively, have been attached to the amino functionalized beads, and the resulting chiral beads have been used in the model HPLC separations of enantiomers. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2631–2643 1997     

Oxidized Dextran as Crosslinker for Chitosan Cryogel Scaffolds and Formation of Polyelectrolyte Complexes between Chitosan and Gelatin

Macroporous scaffolds composed of chitosan and using oxidized dextran as a crosslinker are produced through cryogelation. Introducing gelatin as a third component into the structure results in the formation of mesopores in the pore walls, which are not seen if gelatin is excluded. The mesoporous structure is explained by the formation of polyelectrolyte complexes between chitosan and gelatin before crosslinking takes place. The scaffolds exhibit highly elastic properties withstanding compressions up to 60%. The in vitro biocompatibility of the cryogels is evaluated using fibroblasts from a mouse cell line (L929) and it is seen that the cells adhere and proliferate on the scaffolds. The mesoporous structure seems to have a positive effect on proliferation.

     

Synthesis and properties of new aromatic polyimides — Polymeric materials for light-emitting and liquid-crystal displays

New aromatic diamines containing π-conjugated heterocyclic rings were synthesized, which emit blue light in the photoluminescence. Using these new monomers, soluble poly(amic acid)s were prepared by the polycondensations with pyromellitamic dianhydride, and thermally converted to the polyimides in films which emit intense blue-light. These polyimides are considered as potential candidate materials for fabricating optoelectronic devices which emit blue light. In addition, new poly(m-phenylene 4,4′-oxydiphthalimide)s containing various side chains were synthesized. For these polyimides, thermal properties were investigated with considering the chain flexibility of polymer backbone as well as the spacer and biphenyl mesogen end group in the side chains. In particular, these polyimides exhibited excellent performance in the rubbing process and the controlling of both the alignment and the pretilt of liquid-crystal (LC) molecules in the LC cell. This might be attributed mainly to a strong interaction between the biphenyl mesogen end group in the side chains and the mesogen unit of LC molecules.     

Surface electric field manipulation of the adsorption kinetics and biocatalytic properties of cytochrome c on a 3D macroporous Au electrode

Upon adsorbing on a solid-state substrate, water-soluble proteins are prone to denaturation and deterioration of their functions due to the conformation change. The surface electric field of a conductive substrate is one of the important factors that influence the character of adsorbed proteins. In this work, a 3D macroporous gold electrode has been prepared and served as the working electrode to study the influence of surface electric field on the adsorption kinetics and conformation of the adsorbed cytochrome c (cyt-c) with the help of electrochemical, in situ electrochemical IR spectroscopic, atomic force microscopic, and contact angle measurements. The external electric field creates excess surface charge which can manipulate the adsorption rate of proteins on the substrate by the enhanced electrostatic interactions between the electrode and protein patches by coupling with complementary charges. The amount of immobilized cyt-c with electrochemical activity on the 3D macroporous gold electrode showed a minimum at potential of zero charge (PZC) and it increased with increasing net excess surface charge. Higher electric field could influence the conformation and the corresponding properties such as direct electrochemistry, bioactivity, and surface character of the adsorbed cyt-c molecules. However, high external electric field leads to damage of the protein secondary structure. This study provides fundamentals for the fabrication of biomolecular devices, biosensors, and biofuel cells through electrostatic interactions. Figure Two cases are illustrated for the protein immobilized on electrode surfaces: a retention of protein structure under moderate excess surface charge, b denaturation and conformation change of proteins adsorbed at high excess surface charge, e.g., due to the higher external electric field.     

Boronic acid-appended bis-viologens as a new family of viologen quenchers for glucose sensing

A new family of boronic acid-appended viologen quenchers has been synthesized containing two viologen subunits in a single quencher moiety. Relative to the single viologen-based quenchers previously developed in our laboratory, the bis-viologen ortho-boronic acid (BoB) compounds, in combination with the fluorescent dye, HPTS, display greatly enhanced Stern-Volmer quenching constants and much greater signal modulation in response to glucose. The superior performance is realized at lower quencher-to-dye ratios than are required for the single-viologen systems.     

Carbohydrate-appended curdlans as a new family of glycoclusters with binding properties both for a polynucleotide and lectins

Beta-1,3-glucans having carbohydrate-appendages (alpha-D-mannoside, N-acetyl-beta-D-glucosaminide and beta-lactoside) at the C6-position of every repeating unit can be readily prepared from curdlan (a linear beta-1,3-glucan) through regioselective bromination/azidation to afford 6-azido-6-deoxycurdlan followed by chemo-selective Cu(i)-catalyzed [3 + 2]-cycloaddition with various carbohydrate modules having a terminal alkyne. The resultant carbohydrate-appended curdlans can interact with polycytosine to form stable macromolecular complexes consistent with two polysaccharide strands and one polycytosine strand. Furthermore, these macromolecular complexes show strong and specific affinity toward carbohydrate-binding proteins (lectins). Therefore, one can utilize these carbohydrate-appended curdlans as a new family of glycoclusters.     

Monodisperse polymer beads as packing material for high-performance liquid chromatography. Preparation of macroporous poly(2,3-epoxypropyl vinylbenzyl ether-co-divinylbenzene) beads,their properties,and application to HPLC separations

In search for HPLC separation media with new surface chemistries, a styrene-based monomer, 2,3-epoxypropyl vinylbenzyl ether, containing reactive epoxide groups has been syn-thesized and copolymerized with divinylbenzene in a suspension polymerization. The process involves the use of size monodisperse particles that are swollen with monomer and then polymerized in the presence of a porogenic diluent consisting of a mixture of 4-methyl-2-pentanol and octane. The effect of concentration of divinylbenzene on the pore size dis-tribution and the specific surface area of the resulting uniformly sized porous poly(2,3-epoxypropyl vinylbenzyl ether-co-divinylbenzene) beads has been studied. The epoxide groups of the copolymer have been hydrolyzed and the beads used for reversed-phase chro-matography of both small molecules and proteins to show the effect of hydrophobicity of the matrix on the separation properties. Reversed-phase chromatography of alkylbenzenes follows the expected pattern while for proteins the hydrolyzed beads with the highest content of the crosslinking monomer exhibit a remarkable deviation from the predicted retention characteristics. © 1995 John Wiley & Sons, Inc.     

Synthesis of nicotinonitrile derivatives as a new class of NLO materials

4,6-Diaryl-2-(pyrrolidin-1-yl)-nicotinonitriles 2a-k and 3-amino-2,4-dicyano-5-aryl-biphenyls 3a-c were synthesized from 1,3-diaryl-prop-2-en-1-ones 1a-k and malononitrile by a convenient one-pot method. Likewise, the reaction of aromatic aldehydes with malononitrile afforded 6-amino-4-aryl-2-(pyrrolidin-1-yl)-pyridine-3,5-dicarbonitriles 6a-f. The reaction of mesityl oxide with malononitrile gave 5-amino-7-(pyrrolidin-1-yl)-2,4,4-trimethyl-1,4-dihydro-1,6-naphthyridine-8-carbonitrile 8. The NLO studies of the pyridinedinitrile derivatives 6a, b, f showed a high value while that of nicotinonitrile 2b was weak.     

单分散大孔亲水弱阳离子交换填料的制备及其对鱼精蛋白的分离纯化

以自制的5.0 μm单分散大孔亲水交联聚甲基丙烯酸环氧丙酯(PGMA/EDMA)微球为基质,对其表面进行化学改性,合成弱阳离子交换色谱填料(WCX)。详细考察了该填料对标准蛋白质的分离性能、表面亲水性能、稳定性和重现性以及流速对蛋白保留的影响。实验结果表明,该色谱填料对蛋白的分离性能、重现性及稳定性良好;在流速为3 mL/min时,采用线性梯度洗脱,6 min内可分离4种标准碱性蛋白质,以溶菌酶测定的该填料的动力学吸附容量为29.86 mg/g。将其用于鱼精蛋白的分离纯化,经反相高效液相色谱测定纯化后鱼精蛋白的纯度为99.2%;与商品Shodex IEC SP-825强阳离子交换色谱柱比较,纯化结果几乎一样。     

Stable poly (ionic liquids) with unique cross‐linked mesoporous‐macroporous structure as efficient catalyst for alkylation of o‐xylene and styrene

In this work, using divinylbenzene (D), 1‐vinylimidazole (V) and 1‐vinyl‐3‐butylimidazolium bromide ([VBIM][Br]) as monomers, the binary‐monomer poly (ionic liquids) (PILs) and ternary‐monomer PILs were successfully synthesized, via hydrothermal polymerization and anion exchange, sequentially. Compared with each other, the ternary polymeric acidic IL catalyst has a clear spongy porous structure, while having a more stable macroporous structure, a larger specific surface area, more acidic groups and more active sites. Catalytic performance of catalyst was investigated through the alkylation of o‐xylene and styrene. The effect of the amount of IL added and the length of the cation chain on the ternary polymerization of acidic IL was systematically investigated. Under optimal reaction conditions (molar ratio of monomers was D:V:[VBIM][Br] = 2:1:1, the most suitable cation chain length was C₄), the synthesized MPD‐[C₄V]‐[VBIM][SO₃CF₃] has a larger specific surface area (89.47 m²/g), large pore volume (0.29 cm³/g), and abundant mesopores and macropores, which help to improve the contact between the active site and reactants. Moreover, the catalyst could maintain a relatively high conversion of styrene (99.0%), 1,2‐diphenylethane yield (98.7%) and high thermostability under reaction and be easily be divided from the solution, which is critical for heterogeneous solid catalysts.