添加盐对磺酸基聚电解质分子内及分子间荧光非辐射能量转移的影响

合成了带萘、芘单标记、双标记的2-丙烯酰胺基-2-甲基丙磺酸(AMPS)与N,N-二甲基丙烯酰胺共聚强聚电解质,测定了在NaCl和CaCl₂水溶液中的分子内与分子间荧光非辐射能量转移(NRET).由于添加盐的屏蔽作用,分子内与分子间的NRET都随盐浓度升高而加强,而且钙离子的作用比钠离子显著.为了比较不同试样的NRET,定义归一化NRET效率E_n为盐溶液中的NRET与纯水中的NRET之比.随试样电荷密度F_AMPS上升,分子内E_n减小而分子间E_n增大.尽管聚电解质的浓度低于接触浓度c^*,但因溶液中发生了反离子凝聚,凝聚的反离子会引起大分子间的聚集.     

水溶性高分子聚集行为荧光非辐射能量转移研究进展

评述了近几年荧光非辐射能量转移有疏水改性聚电解质的疏水聚集、高分子水溶液相变伴随的分子链塌陷、水溶性高分子与表面活性剂的相互作用等研究中的新进展,阐明了非辐射能量转移技术在水溶性高分子研究中的重要作用。     

芘标记磺酸基聚电解质在水与DMSO中的荧光光谱

合成了芘标记单体N-(芘基)甲基-2-甲基丙烯酰胺(PyMA),其与2-丙烯酰胺基-2-甲基丙磺酸(AMPS)、N,N-二甲基丙烯酰胺(DMAA)共聚,得到含PyMA摩尔分数为0.1%、AMPS摩尔分数F_AMPS分别为0.033～0.896的芘标记磺酸基聚电解质.在DMSO和水中,F_AMPS<0.449时芘标记聚电解质的荧光光谱与PyMA的荧光光谱基本相同;当F_AMPS≥0.449时,芘的[0,1]和[0,3]跃迁的发射强度大幅度增强.芘标记的I₁/I₃值随聚电解质电荷密度增加逐渐减小,且随聚电解质浓度增加也减小,表明聚电解质体系中通过电离基团间吸引形成了分子主链的聚集.     

原位凝聚法制备聚电解质微胶囊——模板中掺杂聚电解质量对微胶囊结构与性能的影响

通过在CaCO3制备过程中加入不同浓度聚苯乙烯磺酸钠(PSS)的方法来控制掺杂进CaCO3粒子中的PSS含量,得到了PSS掺杂量为4%～11%,尺寸均匀的CaCO3球形微粒.在微粒表面仅吸附一层聚烯丙基胺盐酸盐(PAH)后,用乙二胺四乙酸二钠(EDTA)使碳酸钙溶解;释放出的PSS与PAH原位凝聚制备得到了分散良好且完整的聚电解质复合物微胶囊.在所研究的范围内,模板微粒中PSS的含量对微胶囊的形态结构和性能没有明显影响.与传统的层层组装微胶囊相比,聚电解质复合物微胶囊有较好的热稳定性,但在高盐浓度下尺寸收缩程度较大.由于和层层组装微胶囊相比缺乏结合紧密的有序结构,原位凝聚法制备的微胶囊囊壁的截留分子量较大.     

基于荧光共轭聚电解质的生物分子检测

共轭聚电解质综合了传统共轭聚合物的光电性质和聚电解质的水溶性特点,使其在新一代化学生物荧光传感器中获得多种应用。本文总结了近五年来报道的共轭聚电解质（聚芴、聚噻吩、聚苯撑乙烯、聚苯撑乙炔等）用于检测生物分子的研究进展,并对共轭聚电解质的应用前景进行了展望。     

支化侧链偶氮聚电解质的合成和H-聚集

合成了一种新型支化侧链型偶氮聚电解质PMAPB₆P-AA.以偶氮生色团为探针,研究了这类聚电解质在混合溶剂中的H-聚集,以及H-聚集对偶氮生色团光响应性能的影响.研究发现,PMAPB₆P-AA在水体积分数大于11%的DMF/H₂O混合溶剂中形成H-聚集.偶氮苯离域电子的色散力是形成H-聚集的主要动力.与偶氮小分子MAPB₆和MAPB₆P相比,PMAPB₆P-AA表现出更强的H-聚集能力,表明疏水作用和聚合物链的束缚作用等也是影响偶氮苯基团H-聚集能力的重要因素.H-聚集对PMAPB₆P-AA光响应影响的明显特征是光响应速率减慢和光致顺反异构的效率降低.     

聚苯乙烯分子链构象与其薄膜的玻璃化转变行为

本文利用椭偏仪研究了成膜方式对不同分子量聚苯乙烯(PS)超薄膜玻璃化转变行为的影响.发现PS超薄膜的玻璃化转变温度(Tg)随着厚度降低的幅度与其成膜方式、分子量有关.当PS膜低于一定厚度时,旋涂法制备的PS膜的Tg比相同厚度浇铸法制备的膜低,且二者Tg差值随着厚度的降低而增大.这二种膜Tg的差值和Tg发生偏离时膜的临界厚度随聚苯乙烯分子量的增加而增加.利用非辐射能量转移荧光光谱证实成膜方式主要是影响PS分子链在膜中的构象.旋涂法制备的PS膜相对于本体在近表面区域分子链的形变更大.分子量愈大,分子运动时内摩擦阻力愈大,近表面区域分子的残余应力愈大.由于强运动能力的活性层(空气/PS界面)对PS薄膜Tg的影响占主导,相同厚度下分子链愈伸展,残余应力越大,PS薄膜的Tg越低,导致成膜方式与分子量的影响也愈大.     

两种侧链偶氮聚电解质自组装膜中生色团取向研究

用偏振紫外光谱研究了两种侧链偶氮聚电解质静电逐层自组装膜中偶氮生色团的初始取向 .讨论了不同的组装条件对自组装膜中偶氮生色团取向的影响 .进一步探讨了偶氮聚电解质自组装膜的结构特点 .研究表明 ,侧链偶氮聚电解质自组装膜中的偶氮生色团存在一定程度的面内取向 ,自组装的各种影响条件和聚合物结构等 (pH值、侧链柔性间隔基团长度、以及偶氮生色团官能度等 )与自组装膜中偶氮生色团的面内取向程度存在一定的相关性 .通过研究偶氮生色团的取向和影响因素 ,可以深入认识侧链偶氮聚电解质的自组装行为     

支化侧链偶氮聚电解质生色团H-聚集的动力学研究

利用偶氮聚电解质上的偶氮苯基团作为“探针”,研究了支化侧链偶氮聚电解质PMAPB6P-AA的偶氮生色团H-聚集动力学过程.研究发现,在不同THF/H2O配比情况下,H-聚集的速率有很大差别,THF比例越小,生色团发生H-聚集的速率越大,即偶氮聚电解质在溶剂体系中的疏水聚集对发生H-聚集有重要推动作用.通过测定偶氮聚电解质上的“孤立”生色团和H-聚集体的紫外光谱最大吸收值变化,表征了H-聚集过程的动力学,并分别用一级和二级动力学方程进行了拟合.结果表明,偶氮聚电解质的H-聚集过程具有二级动力学过程的特点.     

新型支化侧链偶氮聚电解质的合成与性能研究

通过后重氮偶合的方法合成了一种含支化侧链偶氮苯生色团的聚电解质 (PBANT AC) .用IR、NMR、DSC、UV和元素分析等手段对聚合物的结构和性能进行了表征 .研究发现 ,在不同比例的水和四氢呋喃混合溶剂中PBANT AC的紫外 可见光光谱有很大的差别 .这种差别反映了PBANT AC分子中的偶氮苯生色团的不同聚集状态 .通过静电吸附逐层自组装的方法将PBANT AC分子组装成多层膜 .在 488nm的偏振Ar+ 激光的照射下 ,聚合物薄膜中的偶氮苯生色团可发生光致取向 ,取向有序度约 0 0 5 .偶氮苯生色团的顺反异构化反应使H 聚集体在光照后发生解聚集     

Nonradiative Energy Transfer through Distributed Bands in Piezochemically Synthesized Cesium and Formamidinium Lead Halide Perovskites

Repeated absorption of emitted photons, also called photon recycling, in large crystals and thick films of perovskites leads to delayed photoluminescence (PL) and decrease of PL intensity. The role of distinct band gaps, which act as donors and acceptors of energy, and nonradiative energy transfer on such delayed, low intensity emission is yet to be rationalized. Here we report delayed emission by nonradiative energy transfer across a distribution of energy states in close-packed crystallites of cesium lead bromide CsPbBr₃, formamidinium lead bromide FAPbBr₃, or the mixed halide FAPb(BrI)₃ perovskite synthesized in the form of thick pellets by the piezochemical method. The PL lifetime of the bromide-rich domain in the mixed halide pellet is considerably decreased when compared with a pure FAPbBr₃ pellet. Here the domains with higher bromide composition act as the energy donor, whereas the iodide-rich domains are the acceptors. Time-resolved PL measurements of CsPbBr₃, FAPbBr₃, and the mixed halide FAPb(BrI)₃ perovskite pellets help us to clarify the role of nonradiative energy transfer on photon recycling.     

基于激发态能量转移机理比率型荧光探针的研究进展

激发态能量转移(Excitation Energy Transfer,EET)作为一类重要的光物理现象,被广泛用于比率型荧光探针和分子灯标的设计以及DNA检测等多个领域.影响EET效率的两个重要因素是供受体间的空间距离和光谱交盖,通过调节供受体间的空间距离或光谱重叠程度来调控能量转移过程,实现对目标客体的双波长比率检测.综述了基于不同供受体荧光团的EET体系、供受体间的连接方式对能量转移效率的影响,以及通过调控供受体间光谱重叠程度或空间距离,获得识别不同客体的比率型荧光探针,并对EET机理的比率型荧光探针的设计以及未来在生物成像和医学检测等领域的应用进行了展望.     

Competitive Photoisomerization and Energy Transfer Processes in Fluorescent Multichromophoric Systems

Multichromophoric systems showing both fluorescence and photoisomerization are fascinating, with complex interchromophoric interactions. The experimental and theoretical study of a series of compounds, bearing a variable number of 4-dicyanomethylene-2-tert-butyl-6-(p-(N-(2-azidoethyl)-N-methyl)aminostyryl)-4H-pyran (DCM) units are reported. The photophysical properties of multi-DCM derivatives, namely 2DCM and 3DCM , were compared to the single model azido-functionalized DCM , in the E and Z isomers. The (EE)- 2DCM and (EEE)- 3DCM were synthesized via the click reaction. Steady-state spectroscopy and photokinetics experiments under UV or visible irradiation indicated the presence of intramolecular energy transfer processes among the DCM units. Homo- and hetero-energy transfer processes between adjacent chromophores were confirmed by fluorescence anisotropy and decays. Molecular dynamics simulations for 2DCM were carried out and analyzed using a Markov state model, providing geometrical parameters (orientation and distance between chromophores) and energy transfer efficiency. This work contributes to a better understanding and rationalization of multiple energy transfer processes occuring within multichromophoric systems.     

Delayed Fluorescent Emission from Pyrene Doped Phenanthrene Nanoparticles Based on Triplet-triplet Energy Transfer

Doped nanoparticles were prepared from pyrene and phenanthrene using a facile reprecipitation method. The doped nanoparticles presented unique delayed fluorescent emissions of pyrene under the unprotected condition. The ratio of the intensity of delayed fluorescence (I_DF) to that of phosphorescence (I_P) is about 4:1, which almost keeps unchanged with the decrease of pyrene content at room temperature. The intensity of the delayed fluorescence emissions is dependent on the relative content of pyrene, as well as the aggregation degree of nanoparticles. The delayed emissions are contributed to efficient triplet‐triplet energy transfer from phenanthrene (donor) to pyrene (acceptor). Steady fluorescence measurement have proved that the singlet‐singlet energy transfer process was also existent dominated by the radiation energy transfer mechanism.     

Tetrahydrofuran Activates Fluorescence Resonant Energy Transfer from a Cationic Conjugated Polyelectrolyte to Fluorescein‐Labeled DNA in Aqueous Media

A cationic water‐soluble conjugated polyelectrolyte, poly[9,9‐bis(6′′‐(N,N,N‐trimethylammonium)hexyl)fluorene‐co‐alt‐2,5‐bis(6′‐(N,N,N‐trimethylammonium)hexyloxyphenylene) tetrabromide], was synthesized. Fluorescence resonant energy transfer (FRET) experiments between the polymer and fluorescein‐labeled single‐stranded DNA (ssDNA‐Fl) were conducted in aqueous buffer and THF/buffer mixtures. Weak fluorescence emission in aqueous buffer was observed upon excitation of the polymer, whereas addition of THF turned on the fluorescence. Fluorescence self‐quenching of ssDNA‐Fl in the ssDNA‐Fl/polymer complexes as well as electron transfer from the polymer to fluorescein may account for the low fluorescence emission in buffer. The improved sensitization of fluorescence by the polymer observed in THF/buffer could be attributed to the weaker binding between the polymer and ssDNA‐Fl and a decrease in dielectric constant of the solvent mixture, which disfavors electron transfer. THF‐assisted signal sensitization was also observed for the polymer and fluorescein‐labeled double‐stranded DNA (dsDNA‐Fl). These results indicate that the use of cosolvent provides a strategy to improve the detection sensitivity for biosensors based on the optical amplification provided by conjugated polymers.     

Synthesis and Performance of Novel Sulfonate Gemini Surfactant with Trialkyl Chains

A new type of sulfonate gemini surfactant with three lipophilic alkyl chains (3C₁₀-DS) was synthesized, and the structure of the product was confirmed by using the infrared spectrum and mass spectrum. Its critical micelle concentration (CMC) is 0.41 mmol/L, one order of magnitude lower than those of convectional (single-chain) surfactants, and the minimum surface tension is 27.6 mN/m. The interfacial tension (IFT) between the compound system of 3C₁₀-DS and petroleum sulfonate (PS) and the simulated oil reaches ultra-low levels (10^?3 mN/m), and there exists significant synergistic effect between 3C₁₀-DS and PS. The compound flooding system consisting of polymer and the mixture of 3C₁₀-DS and PS can effectively improve oil recovery for high-medium permeability cores and have a good application prospect in enhancing oil recovery.