配体对功能自组装薄膜的光致电子转移特性的影响

0 Introduction The strategy for fabrication of functionalized self- assembled films has been developing rapidly in recent years. Fujihara and his coworkers[1,2] first reported the dehydrative coupling of a carboxyl group of rhodamine B with a surface hydroxyl group to form a presumed ester linkage. Sustained photocurrents from ester- linked tin oxide electrodes were 2 orders of magnitude higher than those obtained from amide-linked silane- pretreated tin oxide surfaces. Soon after, Goodenough…     

Construction of Insulin 18‐mer Nanoassemblies Driven by Coordination to Iron(II) and Zinc(II) Ions at Distinct Sites

Controlled self‐assembly (SA) of proteins offers the possibility to tune their properties or to create new materials. Herein, we present the synthesis of a modified human insulin (HI) with two distinct metal‐ion binding sites, one native, the other abiotic, enabling hierarchical SA through coordination with two different metal ions. Selective attachment of an abiotic 2,2′‐bipyridine (bipy) ligand to HI, yielding HI–bipy, enabled Zn^II‐binding hexamers to SA into trimers of hexamers, [[HI–bipy]₆]₃, driven by octahedral coordination to a Fe^II ion. The structures were studied in solution by small‐angle X‐ray scattering and on surfaces with AFM. The abiotic metal ligand had a higher affinity for Fe^II than Zn^II ions, enabling control of the hexamer formation with Zn^II and the formation of trimers of hexamers with Fe^II ions. This precise control of protein SA to give oligomers of oligomers provides nanoscale structures with potential applications in nanomedicine.     

Development of a Metal‐Ion‐Mediated Base Pair for Electron Transfer in DNA

A new C‐nucleoside structurally based on the hydroxyquinoline ligand was synthesized that is able to form stable pairs in DNA in both the absence and the presence of metal ions. The interactions between the metal centers in adjacent Cu^II‐mediated base pairs in DNA were probed by electron paramagnetic resonance (EPR) spectroscopy. The metal–metal distance falls into the range of previously reported values. Fluorescence studies with a donor–DNA–acceptor system indicate that photoinduced charge‐transfer processes across these metal‐ion‐mediated base pairs in DNA occur more efficiently than over natural base pairs.     

Photoconductive Core–Shell Liquid‐Crystals of a Perylene Bisimide J‐Aggregate Donor–Acceptor Dyad

A novel core–shell structured columnar liquid crystal composed of a donor‐acceptor dyad of tetraphenoxy perylene bisimide (PBI), decorated with four bithiophene units on the periphery, was synthesized. This molecule self‐assembles in solution into helical J‐aggregates guided by π–π interactions and hydrogen bonds which organize into a liquid‐crystalline (LC) columnar hexagonal domain in the solid state. Donor and acceptor moieties exhibit contrasting exciton coupling behavior with the PBIs’ (J‐type) transition dipole moment parallel and the bithiophene side arms’ (H‐type) perpendicular to the columnar axis. The dyad shows efficient energy and electron transfer in solution as well as in the solid state. The synergy of photoinduced electron transfer (PET) and charge transport along the narcissistically self‐assembled core–shell structure enables the implementation of the dye in two‐contact photoconductivity devices giving rise to a 20‐fold increased photoresponse compared to a reference dye without bithiophene donor moieties.     

Photoinduced Electron Transfer within a Zinc Porphyrin–Cyclobis(paraquat‐p‐phenylene) Donor–Acceptor Dyad

Understanding the mechanism of efficient photoinduced electron‐transfer processes is essential for developing molecular systems for artificial photosynthesis. Towards this goal, we describe the synthesis of a donor–acceptor dyad comprising a zinc porphyrin donor and a tetracationic cyclobis(paraquat‐p‐phenylene) (CBPQT⁴⁺) acceptor. The X‐ray crystal structure of the dyad reveals the formation of a dimeric motif through the intermolecular coordination between the triazole nitrogen and the central Zn metal of two adjacent units of the dyad. Photoinduced electron transfer within the dyad in MeCN was investigated by femtosecond and nanosecond transient absorption spectroscopy, as well as by transient EPR spectroscopy. Photoexcitation of the dyad produced a weakly coupled ZnP^+.–CBPQT^3+. spin‐correlated radical‐ion pair having a τ=146 ns lifetime and a spin–spin exchange interaction of only 0.23 mT. The long radical‐ion‐pair lifetime results from weak donor–acceptor electronic coupling as a consequence of having nine bonds between the donor and the acceptor, and the reduction in reorganization energy for electron transfer caused by charge dispersal over both paraquat units within CBPQT^3+..     

Charge Separation in a Multifunctionalized Framework of Hydrogen‐Bonded Periodic Mesoporous Organosilica

Integration of functional molecular parts into nanoporous materials in a state that allows intermolecular charge or energy transfer is one of the key approaches to the development of photofunctional and electroactive materials. Herein, we report charge separation in a functionalized framework of a periodic mesoporous organosilica (PMO) self‐assembled by hydrogen bonds. Electroactive π‐conjugated organic species with different electron‐donating and electron‐accepting properties were selectively fixed onto the external surface of a nanoparticulate PMO, within the pore wall, and onto the surface of the internal mesopore. UV irradiation of the modified PMO resulted in photoinduced electron transfer and charge separation from the external surface to the pore wall and from the pore wall to the surface of the internal mesopores. These results suggest the high potential of multifunctionalized PMOs in the construction of photocatalytic reaction fields.     

Temperature‐induced self‐assembly and metal‐ion stabilization of histidine functional block copolymers

Histidine functional block copolymers are thermally self‐assembled into polymer micelles with poly‐N‐isopropylacrylamide in the core and the histidine functionality in the corona. The thermally induced self‐assemblies are reversible until treated with Cu²⁺ ions at 50 °C. Upon treatment with 0.5 equivalents of Cu²⁺ relative to the histidine moieties, metal‐ion coordination locks the self‐assemblies. The self‐assembly behavior of histidine functional block copolymers is explored at different values of pH using DLS and ¹H NMR. Metal‐ion coordination locking of the histidine functional micelles is also explored at different pH values, with stable micelles forming at pH 9, observed by DLS and imaged by atomic force microscopy. The thermal self‐assembly of glycine functional block copolymers at pH 5, 7, and 9 is similar to the histidine functional materials; however, the self‐assemblies do not become stable after the addition of Cu²⁺, indicating that the imidazole plays a crucial role in metal‐ion coordination that locks the micelles. The reversibility of the histidine‐copper complex locking mechanism is demonstrated by the addition of acid to protonate the imidazole and destabilize the polymer self‐assemblies. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1964–1973     

A Smart Photochromic Semiconductor: Breaking the Intrinsic Positive Relation Between Conductance and Temperature

Breaking the intrinsic rule of semiconductors that conductivity increases with increase of temperature and realizing a dramatic dropping of conductivity at high temperature may arouse new intriguing applications, such as circuit overload or over‐temperature protecting. This goal has now been achieved through T‐type electron‐transfer photochromism of one organic semiconductor assembled by intermolecular cation???π interactions. Conductivity of the viologen‐based model semiconductor (H₂bipy)(Hox)₂ (H₂bipy=4,4′‐bipyridin‐1,1′‐dium; ox=oxalate) increased by 2 orders of magnitude after photoinduced electron transfer (a record for photoswitchable organic semiconductors) and generation of radical cation???π interactions, and fell by approximately 81 % at 100 °C through reverse electron transfer and degeneration of the radical cation???π interactions. The model semiconductor has at least two different electron transfer pathways in the decoloration process.     

Metal ion-coupled and decoupled electron transfer

Effects of metal ions on thermal and photoinduced electron-transfer reactions from electron donors (D) to electron acceptors (A) are reviewed in terms of metal ion-coupled electron transfer (MCET) vs. metal ion-decoupled electron transfer (MDET). When electron transfer from D to A is coupled with binding of metal ions to A^?, such an electron transfer is defined as MCET in which metal ions accelerate the rates of electron transfer. A number of examples of electron-transfer reactions from D to A, which are energetically impossible to occur, are made possible by strong binding of metal ions to A^? in MCET. The structures of metal ion complexes with A^? are also discussed in relation with the MCET reactivity. The MCET reactivity of metal ions is shown to be enhanced with an increase in the Lewis acidity of metal ions. In contrast to MCET, strong binding of metal ions to A^? results in deceleration of back electron transfer from metal ion complexes of A^? to D⁺ in the radical ion pair, which is produced by photoinduced electron transfer from D to A in the presence of metal ions, as compared with back electron transfer without metal ions. The deceleration of back electron transfer in the presence of metal ions results from no binding of metal ions to A. This type of electron transfer is defined as metal ion-decoupled electron transfer (MDET). The lifetimes of CS state (D⁺–A^?) produced by photoinduced electron transfer from D to A in the D–A linked systems are also elongated by adding metal ions to the D–A systems because of the stabilization of the CS states by strong binding of metal ions to A^? and the resulting slow MDET processes.     

“Two‐Point” Self‐Assembly and Photoinduced Electron Transfer in meso‐Donor‐Carrying Bis(styryl crown ether)‐BODIPY–Bis(alkylammonium)fullerene Donor–Acceptor Conjugates

BF₂‐chelated dipyrromethene, BODIPY, was functionalized to carry two styryl crown ether tails and a secondary electron donor at the meso position. By using a “two‐point” self‐assembly strategy, a bis‐alkylammonium‐functionalized fullerene (C₆₀) was allowed to self‐assemble the crown ether voids of BODIPY to obtain multimodular donor–acceptor conjugates. As a consequence of the two‐point binding, the 1:1 stoichiometric complexes formed yielded complexes of higher stability in which fluorescence of BODIPY was found to be quenched; this suggested the occurrence of excited‐state processes. The geometry and electronic structure of the self‐assembled complexes were derived from B3LYP/3‐21G(*) methods in which no steric constraints between the entities was observed. An energy‐level diagram was established by using spectral, electrochemical, and computational results to help understand the mechanistic details of excited‐state processes originating from ¹bis‐styryl‐BODIPY*. Femtosecond transient absorbance studies were indicative of the formation of an exciplex state prior to the charge‐separation process to yield a bis‐styryl‐BODIPY ^{. +}–C₆₀ ^{. −} radical ion pair. The time constants for charge separation were generally lower than charge‐recombination processes. The present studies bring out the importance of multimode binding strategies to obtain stable self‐assembled donor–acceptor conjugates capable of undergoing photoinduced charge separation needed in artificial photosynthetic applications.     

Assembly and Photophysics of Ternary Luminescent Lanthanide Molecular Complex Systems

In this paper, according to the molecular fragment principle, a series of eight ternary luminescent lanthanide complex systems were assembled, and whose compositions were determined with elemental analysis and infrared spectrum: Ln(MA)₃(L)·H₂O, where Ln = Sm, Eu, Tb, Dy; HMA = α‐methylacrylic acid; L = 1,10‐phenanthroline (phen), 2,2′‐bipyridine (bipy). The photophysical properties of these functional molecular systems were studied with ultraviolet‐visible absorption spectrum, and fluorescence excitation and emission spectrum. It was found that the heterocylic compounds (phen and bipy) act as the main energy donor and luminescence sensitizer for their suitable energy match and effective energy transfer to the emission energy level of Ln³⁺ ions. MMA ligand was only used as the terminal structural ligand to influence the luminescence. Especially terbium complex systems show the strongest luminescence for the optimum energy match and transfer between phen (bipy) and Tb³⁺ ion.     

Cyclic Zinc(II) Bisporphyrin‐Based Molecular Switches: Supramolecular Control of Complexation‐Mediated Conformational Switching and Photoinduced Electron Transfer

A cyclic zinc(II) bisporphyrin with flexible linker was employed as a dynamic molecular switch under the regulation of π‐acceptors (tetracyanoquinodimethane, trinitrofluorenone, 9‐dicyanomethylenefluorene) and bidentate N‐donor ligands (1,4‐diazabicyclo[2.2.2]octane, pyrazine, 4,4′‐bipyridine). The cyclic bisporphyrin host can efficiently encapsulate the π‐acceptor guests through the strong π–π interaction, which can be replaced again by using a bidentate N‐donor ligand, which coordinates strongly with the metal centers. The open conformation of the bisporphyrin can be efficiently recovered by removing the bidentate ligands using Cu⁺ ion. During the process, two porphyrin rings also reversibly change their relative orientation between perpendicular and parallel. The behavior of the cyclic bisporphyrin was followed by using UV/Vis, ¹H NMR, fluorescence, and electrochemical analyses along with X‐ray structure determination of the complexes. Moreover, control of photoinduced electron transfer (PET “ON‐OFF”) is also achieved by the use of guest exchange. Association constants for the host–guest binding were very high, which further explains the robust nature of such assemblies in solution. The experimental evidence is supported by DFT calculations. Such controllable dynamic features can constitute a new step towards "smart" adaptive molecular devices and the emergence of such systems is of significant interest in supramolecular chemistry.     

自组装ITO/双层磷脂膜的制备及其光电行为研究

在ITO(Indium-tin-oxide)导电玻璃电极上制备上自组装双层磷脂膜和经C60修饰的双层磷脂膜,研究了这种自组装双层磷脂膜的光电行为,考察了偏压、溶液中的给体和受体的浓度对自组装膜光电流强度的影响,讨论了C60分子对光电子跨膜传递过程的促进作用。     

Cyanobuta‐1,3‐dienes as Novel Electron Acceptors for Photoactive Multicomponent Systems

The synthesis, electrochemical, and photophysical properties of five multicomponent systems featuring a Zn^II porphyrin (ZnP) linked to one or two anilino donor‐substituted pentacyano‐ (PCBD) or tetracyanobuta‐1,3‐dienes (TCBD), with and without an interchromophoric bridging spacer (S), are reported: ZnP‐S‐PCBD ( 1 ), ZnP‐S‐TCBD ( 2 ), ZnP‐TCBD ( 3 ), ZnP‐(S‐PCBD)₂ ( 4 ), and ZnP‐(S‐TCBD)₂ ( 5 ). By means of steady‐state and time‐resolved absorption and luminescence spectroscopy (RT and 77 K), photoinduced intramolecular energy and electron transfer processes are evidenced, upon excitation of the porphyrin unit. In systems equipped with the strongest acceptor PCBD and the spacer ( 1 , 4 ), no evidence of electron transfer is found in toluene, suggesting ZnP→PCBD energy transfer, followed by ultrafast (<10 ps) intrinsic deactivation of the PCBD moiety. In the analogous systems with the weaker acceptor TCBD ( 2 , 5 ), photoinduced electron transfer occurs in benzonitrile, generating a charge‐separated (CS) state lasting 2.3 μs. Such a long lifetime, in light of the high Gibbs free energy for charge recombination (ΔG_CR=?1.39 eV), suggests a back‐electron transfer process occurring in the so‐called Marcus inverted region. Notably, in system 3 lacking the interchromophoric spacer, photoinduced charge separation followed by charge recombination occur within 20 ps. This is a consequence of the close vicinity of the donor–acceptor partners and of a virtually activationless electron transfer process. These results indicate that the strongly electron‐accepting cyanobuta‐1,3‐dienes might become promising alternatives to quinone‐, perylenediimide‐, and fullerene‐derived acceptors in multicomponent modules featuring photoinduced electron transfer.     

Influences of Acid on Molecular Forms of Fluorescein and Photoinduced Electron Transfer in Fluorescein‐Dispersing Sol–Gel Titania Films

Fluorescein‐dispersing titania gel films were prepared by the acid‐catalyzed sol–gel reaction using a titanium alkoxide solution containing fluorescein. The molecular forms of fluorescein in the films, depending on its acid–base equilibria, and the complex formation and photoinduced electron transfer process between the dye and titania surface were investigated by fluorescence and photoelectric measurements. The titanium species were coordinated to the carboxylate and phenolate‐like groups of the fluorescein species. The quantum efficiencies of the fluorescence quenching and photoelectric conversion were higher upon excitation of the dianion species interacting with the titania, i.e. the dye–titania complex. This result indicated that the dianion form was the most favorable for formation of the dye–titania complex exhibiting the highest electron transfer efficiency. Using nitric acid as the catalyst, the titania surface bonded to the fluorescein instead of the adsorbed nitrate ion during the steam treatment. The dye–titania complex formation played an important role in the electron injection from the dye to the titania conduction band.     

Facile synthesis of core‐surface crosslinked nanoparticles by interblock RAFT polymerization

A new, efficient method for synthesizing stable nanoparticles with poly(ethylene oxide) (PEO) functionalities on the core surface, in which the micellization and crosslinking reactions occur in one pot, has been developed. First, amphiphilic PEO‐b‐PS copolymers were synthesized by reversible addition fragmentation chain transfer (RAFT) radical polymerization of styrene using (PEO)‐based trithiocarbonate as a macro‐RAFT agent. The low molecular weight PEO‐b‐PS copolymer was dissolved in isopropyl alcohol where the block copolymer self‐assembled as core‐shell micelles, and then the core‐shell interface crosslink was performed using divinylbenzene as a crosslinking agent and 2,2′‐azobisisobutyronitrile as an initiator. The design of the amphiphilic RAFT agent is critical for the successful preparation of core‐shell interface crosslinked micellar nanoparticles, because of RAFT functional groups interconnect PEO and polystyrene blocks. The PEO functionality of the nanoparticles surface was confirmed by ¹H NMR and FTIR. The size and morphology of the nanoparticles was confirmed by scanning electron microscopy, transmission electron microscopy, and dynamic laser light scattering analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Host–Guest Chemistry between Perylene Diimide (PDI) Derivatives and 18‐Crown‐6: Enhancement in Luminescence Quantum Yield and Electrical Conductivity

Perylene diimide (PDI) derivatives exhibit a high propensity for aggregation, which causes the aggregation‐induced quenching of emission from the system. Host–guest chemistry is one of the best‐known methods for preventing aggregation through the encapsulation of guest molecules. Herein we report the use of 18‐crown‐6 (18‐C‐6) as a host system to disaggregate suitably substituted PDI derivatives in methanol. 18‐C‐6 formed complexes with amino‐substituted PDIs in methanol, which led to disaggregation and enhanced emission from the systems. Furthermore, the embedding of the PDI ? 18‐C‐6 complexes in poly(vinyl alcohol) (PVA) films generated remarkably high emission quantum yields (60–70 %) from the PDI derivatives. More importantly, the host–guest systems were tested for their ability to conduct electricity in PVA films. The electrical conductivities of the self‐assembled systems in PVA were measured by electrochemical impedance spectroscopy (EIS) and the highest conductivity observed was 2.42×10^?5 S cm^?1.     

Effect of Gold Nanoparticles on the Structure and Electron‐Transfer Characteristics of Glucose Oxidase Redox Polyelectrolyte‐Surfactant Complexes

Efficient electrical communication between redox proteins and electrodes is a critical issue in the operation and development of amperometric biosensors. The present study explores the advantages of a nanostructured redox‐active polyelectrolyte–surfactant complex containing [Os(bpy)₂Clpy]²⁺ (bpy=2,2′‐bipyridine, py= pyridine) as the redox centers and gold nanoparticles (AuNPs) as nanodomains for boosting the electron‐transfer propagation throughout the assembled film in the presence of glucose oxidase (GOx). Film structure was characterized by grazing‐incidence small‐angle X‐ray scattering (GISAXS) and atomic force microscopy (AFM), GOx incorporation was followed by surface plasmon resonance (SPR) and quartz‐crystal microbalance with dissipation (QCM‐D), whereas Raman spectroelectrochemistry and electrochemical studies confirmed the ability of the entrapped gold nanoparticles to enhance the electron‐transfer processes between the enzyme and the electrode surface. Our results show that nanocomposite films exhibit five‐fold increase in current response to glucose compared with analogous supramolecular AuNP‐free films. The introduction of colloidal gold promotes drastic mesostructural changes in the film, which in turn leads to a rigid, amorphous interfacial architecture where nanoparticles, redox centers, and GOx remain in close proximity, thus improving the electron‐transfer process.     

Hyper‐Assembly of Self‐Assembled Glycoclusters Mediated by Specific Carbohydrate–Carbohydrate Interactions

Hybridization of a self‐assembled, spherical complex with oligosaccharides containing Lewis X, a functional trisaccharide displayed on various cell surfaces, yielded well‐defined glycoclusters. The self‐assembled glycoclusters exhibited homophilic hyper‐assembly in aqueous solution in a Ca²⁺‐dependent manner through specific carbohydrate–carbohydrate interactions, offering a structural scaffold for functional biomimetic systems.     

Photophysics of a Ruthenium 4H‐Imidazole Panchromatic Dye in Interaction with Titanium Dioxide

The photophysics of bis(4,4′‐di‐tert‐butyl‐2,2′‐bipyridine‐κ²N,N′)[2‐(4‐carboxyphenyl)‐4,5‐bis(p‐tolylimino‐κN)imidazolato]ruthenium(II) hexafluorophosphate is investigated, both in solution and attached to a nanocrystalline TiO₂ film. The studied substitution pattern of the 4H‐imidazole ligand is observed to block a photoinduced structural reorganization pathway within the 4H‐imidazole ligand that has been previously investigated. Protonation at the 4H‐imidazole ring decreases the excited‐state lifetime in solution. When the unprotonated dye is anchored to TiO₂, photoinduced electron injection occurs from thermally nonrelaxed triplet metal‐to‐ligand charge transfer (³MLCT) states with a characteristic time constant of 0.5 ps and an injection efficiency of roughly 25 %. Electron injection from the subsequently populated thermalized ³MLCT state of the dye does not take place. The energy of this state seems to be lower than the conduction band edge of TiO₂.