六硝基芪衍生物的红外光谱和热力学性质的理论研究

用量子化学密度泛函理论方法,在B3LYP/6-31G*水平下,对六硝基芪衍生物进行了几何构型全优化和电子结构计算。通过振动分析,求得它们的红外光谱并作归属。将理论计算IR谱与已知实验结果进行比较,表明本文所提供的计算结果是可靠的。对谐振频率以0.96进行标度后基于统计热力学原理求得它们的热力学性质,探讨了热力学性质随硝基数、氨基数、羟基数和温度变化的规律,发现有很好的线性关系,体现了很好的基团加和性。     

高能量密度化合物六硝基六氮杂三环十四烷并双氧化呋咱的理论研究

在DFT-B3LYP/6-31G**水平上，对最近新合成的高能量密度化合物六硝基六氮杂三环十四烷并双氧化呋咱（HHTTD）的分子几何，电子结构，红外振动光谱以及热力学性质进行了理论研究。根据计算结果可知，其全优化几何构型可取α, β, γ和δ四种构象，校正后的计算频率与已有实验值符合。根据分子总能量和前线轨道能隙对几种构象的稳定性进行了分析。此外，基于理论计算密度和生成热，运用Kamlet-Jacobs方程估算了标题物的爆速和爆压，结果表明标题物四种构象的爆速和爆压分别达到10 km/s和45 GPa。表明标题物可作为潜在的高能量密度材料(HEDM)，具有较高的研究开发价值和广阔的应用前景。本文为寻求新型呋咱及氧化呋咱类HEDM提供了丰富信息和指导。     

钛铁矿型六方相ZnTiO3的电子结构和光学性质

分别采用基于密度泛函理论(DFT)的局域密度近似(LDA)和广义梯度近似(GGA)方法对钛铁矿型六方相ZnTiO₃的电子结构进行了第一性原理计算, 并在局域密度近似下计算了六方相ZnTiO₃的光学性质, 并将计算结果与实验数据进行了对比. 结果表明, 在局域密度近似下计算得到的结构参数更接近实验数据. 理论预测六方相ZnTiO₃属于直接带隙半导体材料, 其禁带宽度(布里渊区Z 点)为3.11 eV. 电子态密度和Mulliken 电荷布居分析表明Zn―O键是典型的离子键而Ti―O键是类似于钙钛矿型ATiO₃ (A=Sr, Pb, Ba)的Ti―O共价键. 在50 eV的能量范围内研究了ZnTiO₃的介电函数、吸收光谱和折射率等光学性质, 并基于电子能带结构和态密度对光学性质进行了解释.     

六硝基六氮杂异伍兹烷结构和性质的理论研究

用abinitio和DFT方法,分别在HF/6-31G^*和B3LYP/6-31G^*水平下全优化计算了高能量密度材料六硝基六氮杂异伍兹烷(HNIW)的α(γ),β和ε型构象的分子几何构型、电子结构、IR谱和298～1000K温度下的热力学性质,细致分析比较了两种方法和相关的实验结果。理论计算几何参数与实验值相一致。分子中N—N键较长,N—N键Mulliken集居数较小,预示该键为热解和起爆的引发键。所得的IR谱形符合实验、指纹区频率与实验的平均绝对差值小于45cm^-1。由前线MO能级及其差值预示的热力学稳定性次序[ε＞α(γ)＞β]与实验排序相吻合。     

六苄基六氮杂异伍兹烷的氧化反应性

研究了2，4，6，8，10，12－六苄基－2，4，6，8，10，12－六氮杂四环[5．5．0．0^5,9．0^3.11]十二烷在多种氧化条件下的氧化反应性，得到了一系列新的六氮杂异伍兹烷衍生物，并利用两步法以较高的收率得到期望的化合物六苯甲酰基六氮杂异伍兹烷。     

基于质谱的六硝基六氮杂异伍兹烷热分解动力学

采用低能电子轰击质谱研究了六硝基六氮杂异伍兹烷(HNIW)的裂解过程, 建立了质谱中离子强度曲线的非等温动力学处理方法, 根据产物离子的Arrhenius曲线解释了HNIW热分解的机理. 结果表明, HNIW质谱裂解的表观活化能为145.1 kJ·mol-1. 在130-150 ℃范围内, HNIW质谱的离子产物主要是电子轰击产生的, 其活化能在28-41 kJ·mol-1之间; 在213-228 ℃范围内, 离子主要是热分解产生的, 其活化能在143-179 kJ·mol-1之间. HNIW在213-228 ℃的热分解动力学参数存在良好的动力学补偿效应, 补偿效应公式为lnA=0.252Ea-0.645. HNIW 热分解的主要反应为HNIW.438→6NO2+2HCN+HNIW.108, HNIW.438→6NO2+3HCN+HNIW.81, HNIW.438→6NO2+4HCN+HNIW.54.     

聚乙烯六方相

评述了聚乙烯六方相的研究历史和结论，对其晶格结构，构象特征，热力学特性及形成原因，以及在聚乙烯结晶，尤其是形成伸直链晶体的过程中的动力学角色作了较详细的说明。     

反相高效液相色谱法测定ε-六硝基六氮杂异伍兹烷纯度

六硝基六氮杂异伍兹烷(HNIW)是1998年才合成的一种多环笼型硝胺高能炸药,它的学名是2,4,6,8,1O-六硝基-2,4,6,8,1O,12-六氮杂四环[5.5.O.O~(5.9).O~(3.11)]十二烷,ε-HNIW的密度、爆速及爆压超过现在含能材料领域内独鳌头的王牌炸药奥克托今(HMX)5%～8%,而由圆筒实验及钽板加速实验测得的能量输出则可超过HMX14%.目前,美国已在进行HNIW的中试生产,中国及其他国家正在积极研究HNIW的生产和应用.因此,建立HNIW纯度的分析方法,对于HNIW生产工艺改进、产品质量控制及合HNIW混合炸药和推进剂的成分分析都是迫切需要的.美国的S.A.Oehrle曾采用胶束电动色谱(MECC)及高效液相色谱(HPLC)测定了混合炸药中包括HNIW在内的十多种组分的保留时间;瑞典的B.Persson等也以HPLC测出了混合炸药中三硝基氮杂环丁烷(TNAZ)和HNIW的含量;日本的儿玉保也曾提及他们合成的HNIW经HPLC测定其纯度为99%.但上述报道均不够详细,而且多限于分析含HNIW的混合炸药.作者制得了高纯度的ε-HNIW样品,并以HPLC对所得的HNIW样品进行了纯度测定,得到峰面积归一化定量法分析结果,并对结果进行了讨论.     

六苄基六氦杂异伍兹烷五种氢解脱苄化合物的合成及工业制备

综述了六苄基六氮杂异伍兹烷（HBIW）五种氢解脱苄化合物的合成条件和工业制备工艺。这五种化合物是：四乙酰基二苄基六氮杂异伍兹烷（TADBIW）、四乙酰基二甲酰基六氮杂异伍兹烷（TADFIW）、四乙酰基六氮杂异伍兹烷（TAIW）、四乙酰基二乙基六氮杂异伍兹烷（TADEIW）和六乙酰基六氮杂异伍兹烷（HAIW）。其中的TADBIW系由HBIW经一次氢解合成，其它四种都系由HBIW经两次氢解合成。HBIW的这五种氢解脱苄化合物均可经硝解合成六硝基六氮杂异伍兹烷（HNIW）。另外，本文总结了HBIW及其五种氢解脱苄产物的红外、核磁和质谱数据及它们的基本性能参数。     

β-六硝基六氮杂异伍兹烷的合成及晶体结构

从苄胺和乙二醛出发 ,通过缩合、氢解脱苄及硝解三步合成了高张力多环笼形化合物———六硝基六氮杂异伍兹烷 (HNIW) ,它是迄今为止密度及能量水平最高的高能量密度化合物 .β HNIW的晶体结构表明 ,它是由 2个五元环及 1个六元环构成的笼形结构 ,每个桥氮原子上各连有 1个硝基 ,—NO2 基本位于一平面内 ,C—C键长为 0 1 5 6～ 0 .1 5 9nm ,比标准的sp3 C—C键长 0 0 0 2～ 0 .0 0 5nm .晶体学数据为 :正交晶系 ,空间群Pca2 1,a =0 .96 70 ( 2 )nm ,b =1 .1 6 1 6 ( 2 )nm ,c =1 .30 32 ( 3)nm ;V =1 .46 38( 5 )nm3 ,Z =4,Dc=1 .989g·cm-3 (Dm=1 .982 g·cm-3 ) .     

Structures and energies of the tautomers of 1-nitroso-1,2,4-triazol-5-one-2-oxide: New triazol-5-one-n-oxides

Molecular orbital calculations at the DFT-B3LYP/aug-cc-pVDZ level are performed for the possible tautomers of 1-nitroso-1,2,4-triazol-5-one-2-oxide. We have examined the substitution effects of carbonyl, N-oxide, and nitroso groups by comparing the calculated geometries, relative energies, and electrostatic potentials of model molecules. The optimized structures, vibrational frequencies, and thermodynamic values for triazolone-N-oxides are obtained in the ground state. The results show that 1H, 4H tautomers are most stable. Detonation velocity and detonation pressure are evaluated by the Kamlet-Jacob equations based on the predicted density and the calculated heat of explosion. The explosive properties of the designed compounds seem to be promising compared with those of 1,3,5-trinitroperhydro-1,3,5-triazine (D 8.75 km/s, P 34.70 GPa), octahydro-1,3,5,7-tetrnitro-1,3,5,7-tetrazocine (D 9.10 km/s, P 39.3 GPa), and 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (D 9.20 km/s, P 42.0 GPa).     

1,2,3-三氨基胍二硝基胍盐的合成与量子化学研究

以1,2,3-三氨基胍盐酸盐和二硝基胍为原料,制备了一种新型含能离子盐1,2,3-三氨基胍二硝基胍盐,并对其结构进行了表征. 运用密度泛函理论（DFT）方法,在B3LYP/6-31+G^**水平下计算得到了该盐的几何结构、自然原子电荷分布、前线轨道能量及红外光谱,同时计算了热容、焓及熵等热力学参数,并分析了这些参数和温度之间的函数关系;利用Born-Haber循环求得该化合物的生成热为150.54 kJ/mol;利用Monte-Carlo方法预测了该化合物的理论密度为1.56 g/cm³;基于以上数据进一步计算得到该化合物的爆速为7.81 km/s,爆压为24.74 GPa.     

Substituent effects on heats of formation, group interactions, and detonation properties of polyazidocubanes

We have calculated the heats of formation (HOFs) for a series of polyazidocubanes by using the density functional theory (DFT), Hartree-Fock, and MP2 methods with 6-31G* basis set as well as semiempirical methods. The cubane skeleton was chosen for a reference compound, that is, the cubane skeleton was not broken in the process of designing isodesmic reactions. There exists group additivity for the HOF with respect to the azido group. The semiempirical AM1 method also produced reliable results for the HOFs of the title compounds, but the semiempirical MINDO3 did not. The relationship between HOFs and molecular structures was discussed. It was found that the HOF increases 330-360 kJ/mol for each additional number of the azido group being added to the cubane skeleton. The distance between azido groups slightly influences the values of HOFs. The interacting energies of neighbor azido groups in polyazidocubanes are in the range of 2.3 approximately 6.6 kJ/mol, which are so small and less related to the substituent numbers. The average interaction energy between nearest neighbor --N3 groups in the most stable conformer of octaazidocubane is 2.29 kJ/mol at the B3LYP/6-31G* level. The relative stability related to the number of azido groups of the title compounds was assessed based on the calculated HOFs, the energy gaps between the frontier orbitals, and the bond orders of the C--N3 and C--C bonds. The predicted detonation velocity of hepta- and octa-derivatives is over 9 km/s, and the detonation pressure of them is ca. 40 GPa or over.     

Theoretical studies on four-membered ring compounds with NF2, ONO2, N3, and NO2 groups

Density functional theory (DFT) method has been employed to study the geometric and electronic structures of a series of four-membered ring compounds at the B3LYP/6-311G** and the B3P86/6-311G** levels. In the isodesmic reactions designed for the computation of heats of formation (HOFs), 3,3-dimethyl-oxetane, azetidine, and cyclobutane were chosen as reference compounds. The HOFs for N(3) substituted derivations are larger than those of oxetane compounds with --ONO2 and/or --NF2 substituent groups. The HOFs for oxetane with --ONO2 and/or --NF2 substituent groups are negative, while the HOFs for N3 substituted derivations are positive. For azetidine compounds, the substituent groups within the azetidine ring affect the HOFs, which increase as the difluoroamino group being replaced by the nitro group. The magnitudes of intramolecular group interactions were predicted through the disproportionation energies. The strain energy (SE) for the title compounds has been calculated using homodesmotic reactions. For azetidine compounds, the NF2 group connecting N atom in the ring decrease the SE of title compounds. Thermal stability were evaluated via bond dissociation energies (BDE) at the UB3LYP/6-311G** level. For the oxetane compounds, the O--NO2 bond is easier to break than that of the ring C--C bond. For the azetidine and cyclobutane compounds, the homolyses of C--NX2 and/or N--NX2 (X = O, F) bonds are primary step for bond dissociation. Detonation properties of the title compounds were evaluated by using the Kamlet-Jacobs equation based on the calculated densities and HOFs. It is found that 1,1-dinitro-3,3-bis(difluoroamino)-cyclobutane, with predicted density of ca. 1.9 g/cm(3), detonation velocity (D) over 9 km/s, and detonation pressure (P) of 41 GPa that are lager than those of TNAZ, is expected to be a novel candidate of high energy density materials (HEDMs). The detonation data of nitro-BDFAA and TNCB are also close to the requirements for HEDMs.     

Computational studies on tetrazole derivatives as potential high energy materials

The tetrazole is an important functionality of the most of energetic materials due to 80% nitrogen content, stability, and high enthalpy of formation. The present structure–property relationship study focuses on the optimized geometries of tetrazole derivatives obtained from density functional theory (DFT) calculations at B3LYP/6-31G* levels. The heat of formation (HOF) of tetrazole derivatives have been calculated by designing the appropriate isodesmic reactions. The increase in nitro groups on azole rings shows the remarkable increase in HOF. Density has been predicted by using CVFF force field. Increase in the nitro group increases the density. Detonation properties of the designed compounds were evaluated by using the Kamlet–Jacobs equation based on predicted densities and HOFs. Designed tetrazole derivatives show detonation velocity (D) over 8 km/s and detonation pressure (P) of about 32 GPa. Thermal stability was evaluated via bond dissociation energies (BDE) of the weakest C–NO₂ bond at B3LYP/6-31G* level. Charge on the nitro group has been used to assess the sensitivity correlation. Overall, the study implies that designed compounds of this series are found to be stable and expected to be the novel candidates of high energy materials (HEMs).     

3,7-二硝亚胺基-2,4,6,8-四硝基-2,4,6,8-四氮杂双环[3.3.0]辛烷结构与性能的量子化学研究

设计了一种新型高能量密度化合物--3,7-二硝亚胺基-2,4,6,8-四硝基-2,4,6,8-四氮杂双环[3.3.0]辛烷, 应用密度泛函理论(DFT)的B3LYP 方法在6-31G(d,p)基组水平上对该化合物进行了结构全优化, 并计算得到其红外(IR)光谱; 通过键级分析获得热解引发键的位置为N7-N22, 同时求得校正后的键离解能为91.47 kJ/mol. 采用Monte-Carlo方法预测该化合物的理论密度为2.16 g/cm³; 基于理论密度并结合等键反应及Kamlet-Jacobs公式预测了生成焓、爆速、爆压和爆热值分别为1219.94 kJ/mol, 10.43 km/s, 53.44 GPa和7407.84 J/g. 以上性能参数显示, 该目标化合物达到了高能量密度化合物的基本要求, 是一种潜在的含能材料. 同时给出了该化合物的逆合成路线.     

DFT studies on a high energy density cage compound 4-trinitroethyl-2,6,8,10,12-pentanitrohezaazaisowurtzitane

Polynitro cage compound 4-trinitroethyl-2,6,8,10,12-pentanitrohexaazaisowurtzitane has the same framework with but higher stability than CL-20 and is a potential new high energy density compound (HEDC). In this paper, the B3LYP/6-31G(d,p) method of density functional theory (DFT) has been used to study its heat of formation, IR spectrum, and thermodynamic properties. The stability of the compound was evaluated by the bond dissociation energies. The calculated results show that the first step of pyrolysis is the rupture of the N-NO(2) bond in the side chain and verify the experimental observation that the title compound has better stability than CL-20. The crystal structure obtained by molecular mechanics belongs to the P2(1)2(1)2(1) space group, with lattice parameters a = 12.59 ?, b = 10.52 ?, c = 12.89 ?, Z = 4, and ρ = 2.165 g·cm(-3). Both the detonation velocity of 9.767 km·s(-1) and the detonation pressure of 45.191 GPa estimated using the Kamlet-Jacobs equation are better than those of CL-20. Considering that this cage compound has a better detonation performance and stability than CL-20, it may be a superior HEDC.     

Theoretical studies on the structures, thermodynamic properties, detonation properties, and pyrolysis mechanisms of spiro nitramines

Density function theory (DFT) has been employed to study the geometric and electronic structures of a series of spiro nitramines at the B3LYP/6-31G level. The calculated results agree reasonably with available experimental data. Thermodynamic properties derived from the infrared spectra on the basis of statistical thermodynamic principles are linearly correlated with the number of nitramine groups as well as the temperature. Detonation performances were evaluated by the Kamlet-Jacobs equations based on the calculated densities and heats of formation. It is found that some compounds with the predicted densities of ca. 1.9 g/cm3, detonation velocities over 9 km/s, and detonation pressures of about 39 GPa (some even over 40 GPa) may be novel potential candidates of high energy density materials (HEDMs). Thermal stability and the pyrolysis mechanism of the title compounds were investigated by calculating the bond dissociation energies (BDE) at the B3LYP/6-31G level and the activation energies (E(a)) with the selected PM3 semiempirical molecular orbital (MO) based on the unrestricted Hartree-Fock model. The relationships between BDE, E(a), and the electronic structures of the spiro nitramines were discussed in detail. Thermal stabilities and decomposition mechanisms of the title compounds derived from the B3LYP/6-31G BDE and the UHF-PM3 E(a) are basically consistent. Considering the thermal stability, TNSHe (tetranitrotetraazaspirohexane), TNSH (tetranitrotetraazaspiroheptane), and TNSO (tetranitrotetraazaspirooctane) are recommended as the preferred candidates of HEDMs. These results may provide basic information for the molecular design of HEDMs.     

多硝基尿酸衍生物含能性质的理论研究

为了寻找兼具优异爆轰性能和良好热力学及动力学稳定性的高能材料, 本文设计了15个硝基尿酸化合物, 运用密度泛函理论, 对其性质进行了研究. 通过半经验的K-J方程和比冲量预测了其爆炸性能, 结果表明, 所设计分子的爆热、 分子密度、 爆炸速率和爆炸压强同硝基取代基数目之间存在较强的线性关系. 三硝基尿酸和四硝基尿酸衍生物的爆炸速率超过了8.0 km/s, 爆炸压强超过了30 GPa, 并且大多数衍生物的比冲量要高于目前经常使用的炸药黑索金. 通过计算N—NO₂键的解离能、 特征落高、 分子的自由空间预判了衍生物的稳定性和撞击感度, 结果显示, 绝大多数分子有大于80 kJ/mol的键解离能. 本文的理论结果可以为实验上设计合成新的高能材料提供一些有用的信息.     

Design and properties prediction of modified CL-20 energetic derivatives

We designed a series of energetic compounds based on the CL-20 molecular skeleton, and the properties including molecular geometric structures, electronic structures, density, heat of formation, detonation performances, and impact sensitivity were evaluated using density functional theory (DFT). The results indicate that five molecules have higher density values than that of Octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX; 1.91 g/cm³) and A4 has a larger density value (2.07 g/cm³) than that of CL-20 (2.04 g/cm³). In addition, most of the molecules have better detonation performances and stability than those of CL-20, with A4 showing much greater detonation velocity (9.93 km/s) and pressure (47.32 GPa) than those of CL-20 with a h₅₀ value of 14.02 cm. Taking both excellent detonation performance and low sensitivity into consideration, all seven compounds except for A3 and A5 are considered as potential energetic compounds. These theoretically calculated results would be conducive to the design and synthesis of novel nitramine energetic compounds.