Liquid chromatography/tandem mass spectrometry analysis of chloramphenicol in cooked crab meat

A liquid chromatography/tandem mass spectrometry (LC/MS/MS) method is described for the extraction, cleanup, determination, and confirmation of chloramphenicol (CAP) in cooked crab meat. The method involves pulverization of cooked crab meat with dry ice; extraction of the CAP into ethyl acetate (EtOAc); evaporation (by N2) of the EtOAc; addition of methanol, aqueous NaCl, and heptane; extraction of the lipids into the heptane, followed by extraction of the aqueous phase with EtOAc; evaporation (by N2) of the EtOAc; dissolution into methanol-water; filtration; and separation/detection/confirmation using LC/MS/MS. Crab meat was fortified at 0.25, 0.50, and 1.0 ng/g (ppb) chloramphenicol. Average absolute recoveries were 67, 84, and 86%, respectively, with relative standard deviation values all less than 1%. Four daughter ions (m/z 152, 176, 194, and 257) were monitored off the m/z 321 precursor ion. Determination was based on a standard curve using the peak areas of the m/z 152 daughter ion (the base peak) for standard solutions equivalent to 0.10, 0.20, 0.50, and 1.0 ppb in tissue (made with control crab extract). A set of 6 matrix controls (unfortified crab meat) was also analyzed, in which no chloramphenicol was detected. For identification purposes, the ion ratios (of each daughter ion versus the base daughter ion) of the fortified crab versus those of the chloramphenicol standards agreed within 10% (relative) at fortified chloramphenicol concentrations of 0.25-1.0 ppb.     

Rapid forensic selected reaction monitoring liquid chromatography/mass spectrometry determination of ionophore antibiotics found at toxic levels in animal feeds

A rapid, accurate, and selective method was developed for the forensic determination of ionophore antibiotics in animal feeds. A simple extraction procedure and liquid chromatography/tandem mass spectrometry (LC/MS/MS) in the selected reaction monitoring (SRM) mode were used for rapid identification and confirmation of monensin and lasalocid in feed samples and for quantitation of monensin. Extracts from a homogenous portion of ground feeds were prepared using liquid-solid extraction and liquid-liquid extraction techniques. Feed extracts were further purified by a simple defatting and solvent wash step and then concentrated to dryness. Feed extract residues were reconstituted in 1 mL LC mobile phase and a 2 microL aliquot injected into the SRM LC/MS system. The latter system used a C18, 100 x 2.0 mm, LC column coupled to a PE-Sciex API 2000 tandem triple quadrupole mass spectrometer equipped with a TurbolonSpray LC/MS interface. Feed samples were extracted and analyzed for the determination of monensin and lasalocid within a couple of hours. Control feed samples fortified with monensin at concentrations from 50 ppb to 5 ppm provided a linear response and calibration curve across this range with a correlation coefficient of 0.996.     

Determination of capsaicinoids in salsa by liquid chromatography and enzyme immunoassay

Two simple and rapid methods were developed to monitor pungency of salsa in production. Capsaicin (C) and dihydrocapsaicin (DHC) were quantitated in 17 commercially available tomato-based salsas by enzyme immunoassay (EIA) and liquid chromatography (LC) with fluorescent detection. Samples were extracted with methanol and the extracts were subjected to solid-phase extraction (SPE) using polystyrene-divinylbenzene columns. Analysis of SPE eluates showed good correlation (r2 = 0.953) between LC and EIA, with a slightly high bias for EIA. Salsa fortified with C and DHC from 0.118 to 103.2 microg/g resulted in recoveries of 90-112% (C) and 76-97% (DHC). Limits of detection by LC were 0.1 microg/g for each capsaicinoid and 0.1 microg/g by EIA for total capsaicinoids. The LC on-column response was linear from 0.2 to 100 ng for both C and DHC, whereas the working range for EIA was 0.1-2.0 ppm. Pungency varied between different salsa brands labeled mild, medium, and hot.     

Reversed-phase liquid chromatographic determination of riboflavin in feeds

A method for determination of riboflavin in animal feeds using liquid chromatography (LC) was developed for feed samples fortified with riboflavin at 1 mg/lb or greater (up to 10,000 mg/lb). Feed samples were extracted in 0.1 N HCl with heating on a steam bath for 30 min, followed immediately by mechanical shaking for 30 min. Sample extracts were diluted to target volume with 2% acetic acid and filtered; riboflavin was determined by LC on a reversed-phase C18 column with 2% acetic acid-acetonitrile (85 + 15) mobile phase for separation and fluorescence detection with excitation at 460 nm and emission at 530 nm. The extraction was compared with that of the AOAC Official Method for riboflavin in food and feed premixes. The 2 method extractions were not significantly different from each other at the 95% confidence level. The developed method also had good linearity over 4 orders of magnitude, recovery of 95-99% from spiked feed samples, a limit of detection of riboflavin at 0.00034 microg/mL in solution, a limit of quantitation of 0.023 mg/lb in feed, and good ruggedness.     

Radical Cations of Phenyl‐Substituted Aziridines: What Are the Conditions for Ring Opening?

Radical cations were generated from different phenyl-substituted aziridines by pulse radiolysis in aqueous solution containing TlOH.+, N3. or SO4.- as oxidants or in n-butyl chloride, by 60Co gamma radiolysis in Freon matrices at 77 K, and in some cases by flash photolysis in aqueous solution. Depending on the substitution pattern of the aziridines, two different types of radical cations are formed: if the N atom carries a phenyl ring, the aziridine appears to retain its structure after oxidation and the resulting radical cation shows an intense band at 440-480 nm, similar to that of the radical cation of dimethylaniline. Conversely, if the N atom carries an alkyl substituent while a phenyl ring is attached to a C-atom of the aziridine, oxidation results in spontaneous ring opening to yield azomethine ylide radical cations which have broad absorptions in the 500-800 nm range. In aqueous solution the two types of radical cations are quenched by O2 with different rates, whereas in n-butyl chloride, the ring-closed aziridine radical cations are not quenchable by O2. The results of quantum chemical calculations confirm the assignment of these species and allow to rationalize the different effects that phenyl rings have if they are attached in different positions of aziridines. In the pulse radiolysis experiments in aqueous solution, the primary oxidants can also be observed, whereas in n-butyl chloride a transient at 325 nm remains unidentified. In the laser flash experiments, both types of radical cations were also observed.     

Reversed-phase liquid chromatography/electrospray ionization/mass spectrometry with isotope dilution for the analysis of nitrate and nitrite in water

A new method was developed for the analysis of nitrate and nitrite in a variety of water matrices by using reversed-phase liquid chromatography/electrospray ionization/mass spectrometry in the negative ion mode. For this direct analysis method, nitrate and nitrite anions were well separated under the optimized LC conditions, detected by monitoring m/z 62 and m/z 46 ions, and quantitated by using an isotope dilution technique that utilized the isotopically labeled analogs. The method sensitivity, accuracy, and precision were investigated, along with matrix effects resulting from common inorganic matrix anions. The isotope dilution technique, along with sample pretreatment using barium, silver, and hydrogen cartridges, effectively compensated for the ionization suppression caused by the major water matrix anions, including chloride, sulfate, phosphate, and carbonate. The method detection limits, based on seven reagent water replicates fortified at 0.01 mg N/L nitrate and 0.1 mg N/L nitrite, were 0.001 mg N/L for nitrate and 0.012-0.014 mg N/L for nitrite. The mean recoveries from the replicate fortified reagent water and lab water samples containing the major water matrix anions, were 92-103% for nitrate with an imprecision (relative standard deviation, RSD) of 0.4-2.1% and 92-110% for nitrite with an RSD of 1.1-4.4%. For the analysis of nitrate and nitrite in drinking water, surface water, and groundwater samples, the obtained results were generally consistent with those obtained from the reference methods. The mean recoveries from the replicate matrix spikes were 92-123% for nitrate with an RSD of 0.6-7.7% and 105-113% for nitrite with an RSD of 0.3-1.8%.     

Method for the analysis in maize of the Fusarium mycotoxin moniliformin employing ion-pairing extraction and high-performance liquid chromatography

The Fusarium mycotoxin moniliformin (hydroxycyclobutenedione) has been determined in maize using a novel method with a recovery of 70-80% at 400-1600 micrograms/kg and 60% at the detection limit of 100 micrograms/kg. The method requires extraction of the toxin into aqueous tetra-n-butylammonium hydroxide and removal of cations from this solution by ion-exchange chromatography. Following clean-up by partitioning against dichloromethane, further quaternary ammonium reagent was added to the aqueous phase which was absorbed onto a hydrophilic matrix and the tetra-n-butylammonium moniliformate ion pair extracted into dichloromethane. After evaporation of the organic eluent, the residue was dissolved in aqueous sodium chloride and moniliformin quantitated by ion-pair high-performance liquid chromatography with UV detection. A batch of five samples may be analysed in 5-6 h including the chromatographic determination.     

LC/MS confirmation of ionophores in animal feeds.

A liquid chromatographic/mass spectrometric (LC/MS) electrospray confirmation method has been developed to confirm 4 ionophores (monensin, lasalocid, salinomycin, and narasin) in a variety of animal feeds using a single quadrupole mass spectrometer. The sodium ions of these compounds are dominant in the electrospray mass spectrum. Using optimized "in-source" collision induced dissociation, characteristic fragment ions seen previously using MS/MS can be observed. The drugs were extracted from the feed matrix using hexane-ethyl acetate and isolated using a silica solid-phase extraction cartridge. These ionophores were confirmed in both medicated feeds and nonmedicated feeds fortified with these drugs at the 1-50 ppm level. In addition, this method was used to confirm residues of monensin in a nonmedicated feed that was collected from a feed mill immediately after the production of a similar feed that was medicated with high levels of monensin.     

Solvent extraction of the indium-alizarin Red S chelate as its 1,3-diphenylgaunidium salt

The extraction of the 1,3-diphenylguanidiuin (DPG) salt of the indium-Alizarin Red S (ARS) chelate with n-butyl acetate has been investigated. The extracted species has an absorption maximum at 525 nm, and Beer's law is obeyed over the range from 0.3 to 2.8 ppm of indium. The molar absorptivity is 2.65 x 10(3) l.mole(-1).mm(-1) at 525 nm. The 1:3 indium(III)-ARS chelate is extracted from aqueous solution in a 1:3 molar ratio with DPG. The infrared spectrum implies that the metal ion is probably chelated by the two phenolic oxygen atoms of ARS.     

The Thin-Layer Chromatographic Separation of Halogenated Fumigants as Ammonium Halides and Their Subsequent Determination by Meca

Abstract

A method is described for the determination of several pesticides containing bromine and chlorine by molecular emission cavity analysis (MECA). The pesticides were decomposed in an oxygen flask and the combustion products dissolved in aqueous ammonia. The ammonium halides were separated by TLC using microcrystalline cellulose adsorbent. After scraping from the TLC plates and dissolving in water the separated components were quantitated by MECA using either the InBr (Λ_max = 376 nm) or the InCl (Λ_max = 360 nm) emission bands. Recoveries of over 96% were obtained. Soils fortified with l, 2-dibromo-3-chloropropane at levels of 5–25 ppm were extracted using shaking and distillation procedures. Subsequent analysis showed that the shaking extraction gave a recovery of 92% compared to 85% from acid refluxing.     

The Determination of Organochlorine Pesticides in Sediment by Molecular Emission Cavity Analysis

Abstract

A rapid and convenient method is described for measuring the total organic chlorine content of sedimentary material fortified with organochlorine pesticides. The pesticides are extracted from the sediment, chlorine is then liberated as hydrogen chloride in a Schöniger flask, and the resulting aqueous solution is injected into an indium-lined MECA (Molecular Emission Cavity Analyzer) cavity. The MECA response to the InCl emission is used to determine the amount of halogen present. The study has included sediment samples spiked with between 5 and 25 ppm of p,p′-DDT, γ-BHC, and heptachlor, when the percentage recovery in each case is estimated to be greater than 95% with a similar value recorded for a mixture of all three insecticides.     

Ion flotation of nickel using ethylhexadecyldimethylammonium bromide

Nickel ions react with the surfactant ethylhexadecyldimethylammonium bromide (EHDABr) to foam a surface-active sublate which can be removed from aqueous chloride solutions by ion flotation. A typical ion-flotation procedure involves passing a fixed volume of air through a 250-ml solution containing 4.0 ppm nickel and 0.05 M KCl at a pH of 5 at a rate of 60 ml/min for 60 min. The method is simple and rapid with 87% removal of the nickel.     

含有联苯和肉桂酸酯基团的侧链液晶共聚物的合成与表征

合成了两种含有联苯刚性基元的甲基丙烯酸酯单体M1和M2,其中M1为含有可光交联的肉桂酸酯端基的单体.通过溶液自由基聚合,得到一系列含不同比例M1和M2单体单元的聚丙烯酸酯类侧链液晶共聚物.采用1H-NMR、FT-IR等方法对单体和聚合物的结构进行了详细表征.用示差扫描量热法、偏光显微镜以及广角和小角X-射线衍射对单体和聚合物的液晶性进行了研究.结果表明,末端为肉桂酸酯基团的单体M1无液晶性,其均聚物P1有微弱的液晶性,而端基为正丁基的单体M2及其均聚物P9则表现出近晶相液晶行为.共聚物P2~P5均为向列型液晶,P6~P9则为近晶型液晶.随在聚合物中M2单体含量的增加,共聚物的玻璃化转变温度、熔点及清亮点温度均呈现增加趋势.     

Gas chromatographic-mass spectrometric method for trazodone and a deuterated analogue in plasma

A plasma assay method for trazodone and a 2H4 analogue is described which uses gas chromatography--electron-impact selected-ion monitoring mass spectrometry. Etoperidone is used as an internal standard. The analytes are extracted from basic medium into n-butyl chloride, then back extracted into aqueous 0.1 M hydrochloric acid. The aqueous layer is made basic and re-extracted with n-butyl chloride. The solvent is reduced under nitrogen at 35 degrees C and the residue is redissolved in toluene for gas chromatographic--mass spectrometric analysis. The ions monitored are m/z 231, 235, and 225 for trazodone, [2H4] trazodone and etoperidone, respectively. Quantitation is in the range 40-1000 ng/ml with acceptable precision and accuracy. The method is suitable for biopharmaceutical studies.     

The determination of melamine in muscle tissue by liquid chromatography/tandem mass spectrometry

In early 2007 it was determined that the compound melamine, suspected of having been involved in the deaths of numerous pets, had been fed to hogs intended for human consumption. This report describes a method for the analysis of melamine in porcine muscle tissue using solid-phase extraction (SPE) and high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS). Melamine was extracted in 50% acetonitrile in water. Homogenates were centrifuged and supernatants were acidified and washed with methylene chloride. The aqueous extracts were cleaned up using mixed-mode C8/strong cation exchange SPE and then concentrated, fortified with a stable isotope-labeled analog of melamine, and analyzed by HPLC/MS/MS. Gradient HPLC separation was performed using an ether-linked phenyl column with ammonium acetate/acetic acid and acetonitrile as the mobile phase. Multiple reaction monitoring (MRM) mode of two precursor-product ion transitions for melamine and one for the internal standard was used. A five point calibration curve ranging from 50 to 2000 ng/mL of melamine in solvent was used to establish instrument response. The method was validated by analysis of seven replicate porcine muscle tissue samples fortified with 10 ng/g of melamine. The mean recovery for the seven replicates was 83% with 6.5% relative standard deviation and the calculated method detection limit was 1.7 ng/g.     

Determination of flumequine in channel catfish by liquid chromatography with fluorescence detection.

Rapid methods are described for determination of flumequine (FLU) residues in muscle and plasma of farm-raised channel catfish (Ictalurus punctatus). FLU residues were extracted from tissues with an acidified methanol solution, and extracts were cleaned up on C18 solid-phase extraction cartridges. FLU concentrations were determined by liquid chromatography (LC) using a C18 analytical column and fluorescence detection (excitation, 325 nm; emission, 360 nm). Mean recoveries of FLU from fortified muscle were 87-94% at 5 levels ranging from 10 to 160 ppb (5 replicates per level). FLU recoveries from fortified plasma were 92-97% at 5 levels ranging from 20 to 320 ppb. Limits of detection (signal-to-noise ratio, 3:1) for the method as described were 3 and 6 ppb for muscle and plasma, respectively. Relative standard deviations (RSDs) for recoveries were < or = 12%. Live catfish were dosed with 14C-labeled or unlabeled FLU to generate incurred residues. Recoveries of 14C residues throughout extraction and cleanup were 90 and 94% for muscle and plasma, respectively. RSDs for incurred FLU at 2 levels in muscle and plasma ranged from 2 to 6%. The identity of FLU in incurred tissues was confirmed by LC/mass spectrometry.     

Detection of Aluminum Chlorohydrate Content in Antiperspirant Deodorants Using Screen‐Printed Silver Electrodes by One Drop Analysis

Aluminum chlorohydrate (Al₂(OH)₅Cl?2H₂O, ACH) is an active ingredient in many antiperspirants and deodorants formulation to reduce the body odors (mainly sweat) through interaction with apocrine sweat glands to produce insoluble aluminum hydroxide and free chloride, which then plugs the sweat gland that stops the flow of sweat to the skin's surface. We demonstrated here an one drop (50 μL) electrochemical sensing of the ACH using an in‐built three screen‐printed electrodes assembly containing Ag as working and pseudo reference and carbon as counter electrode system (AgSPE). The free Cl^? ion librated from ACH/H₂O reaction was detected at AgSPE surface at 0.072 V vs. pseudo Ag reference electrode system in pH 2 phosphate solution by Cyclic voltammetric Technique. Under optimal working condition the AgSPE shows a linear calibration plot in the window of 30–2000 ppm of ACH with sensitivity and regression values of 0.104 μA/ppm and 0.998 respectively. Calculated detection limit is 3.03 ppm. RSD values of intra‐ and interassays were 0.19% and 2.79% respectively. Finally, real sample (antiperspirant deodorant lotions) assays were successfully demonstrated with results comparable to the predicted values.     

Liquid chromatographic analysis of vitamin B6 in reconstituted infant formula: collaborative study

A liquid chromatographic (LC) method was validated for the determination of total vitamin B6 in infant formula. Total vitamin B6 was quantified by converting the phosphorylated and free vitamers into pyridoxine. Pyridoxine was determined by ion pair reversed-phase LC with fluorescence detection. The method was subjected to an AOAC collaborative study involving a factory-manufactured, milk- and soy-based infant formula. Each was spiked at 3 concentrations in the range of 0-1 microg/g and sent as blind duplicate to participant laboratories. Nine laboratories returned valid data which were statistically analyzed for outliers and precision parameters. The repeatability relative standard deviation (RSD(r)) ranges were 2.0-4.0 and 3.5-5.9% for fortified milk- and soy-based formulas, respectively. The reproducibility relative standard deviation (RSD(R)) ranges were 8.2-8.4 and 6.7-11.2% for fortified milk- and soy-based formulas, respectively. HORRAT values ranged from 0.42 to 0.53, indicating that the precision of the method is acceptable. The mean RSD(r):RSD(R) values were 0.60 and 0.55 for milk- and soy-based formulas, respectively. As expected, RSDs for the unfortified samples were higher, but their HORRAT values (0.81 and 2.06) helped define a realistic limit of quantitation as 0.05 microg/g. Recovery data were quantitative and varied between 81.4 and 98.0% (mean = 89.8%) for each of 6 spiked materials.     

Ion Chromatography for Rapid and Sensitive Determination of Total Chlorine in Water

In this article, we report a new method that involves adsorption, oxygen bomb combustion, and ion chromatography for the preconcentration and determination of adsorbable organic halogen. This method can be divided into four steps, including: macroporous resin adsorption enrichment, optimization, oxygen bomb combustion, and ion chromatography determination. The project studies the macroporous resin adsorb organic halide pollutants and subsequent burn by an oxygen bomb combustion analyzer. The organic halogen in the aerobic environment combusts into hydrogen chloride. The water absorbing hydrogen chloride was then determined by ion chromatography. The influences of some adsorption and combustion parameters, such as the adsorption time, adsorption solution volume, solution pH, hexachlorobenzene acid concentration, combustion oxygen pressure, among others, on their respective adsorption efficiency were investigated. In the optimal condition, the adsorption time was 3.5 h; solution volume was 20 mL; pH was 4; combustion absorption time was 15 min; and the chloride calibration working range was from 1 ppm to 20 ppm (R ²  = 0.9998). Finally, the proposed method was successfully applied to the determination of organic halogen in water samples. The recoveries of chlorine (at spiked concentrations of 10 ppm and 20 ppm into water) in real samples ranged from 92.2% to 101.0%. Intra-day precision (N = 3) in terms of peak area, expressed as relative standard deviation, was found to be within the range of 0.68%–1.97%.     

Determination of clethodim and its oxidation metabolites in crops by liquid chromatography with confirmation by LC/MS

A method was developed for determination of the herbicide clethodim (C0) and its oxidation metabolites clethodim sulfoxide (C1) and clethodim sulfone (C2) in agricultural products. Upon extraction, both C0 and C1 were oxidized to C2 by m-chloroperoxybenzoic acid, and C2 was determined by liquid chromatography (LC). The C2 peak was confirmed by liquid chromatography/mass spectrometry (LC/MS) with electrospray ionization (ESI). Recoveries of C0 from radish, tomato, onion, sweet potato, kidney bean, carrot, cabbage, and lettuce ranged from 91 to 118% following fortification at 0.05-1.0 ppm. The detection limit of C2 in crops was 0.01 ppm (S/N > 3). The fortified samples of onion, sweet potato, kidney bean, and carrot were confirmed by LC/MS (ESI), and the peak of C2 was detected.