A new series of dinucleating macrocyclic ligands and their complexes of zinc(II)

A new category of dinucleating macrocyclic Schiff base ligands with ring sizes from 34- to 52-membered have been synthesised employing metal template procedures involving the reaction of o-phenylenediamine with a series of α,ω-bis(3′-hydroxy-4′-formylphenyloxy)alkanes in the presence of calcium(II), barium(II) or manganese(II). The latter cations act as ‘transient’ templates for formation of the corresponding metal-free Schiff base macrocyclic ligands, H₄Lⁿ (where n signifies the number of carbons in each linking bis-alkoxy chain); the macrocycles corresponding to n = 4, 6 and 8 were isolated and characterised while, for n = 1, in which single methylene groups acts as the bridges between salicyl moieties, the cyclic product was used directly for preparation of its dinuclear complex, [Zn₂L¹], without prior isolation. Evidence for the templating role of barium in the preparation of H₄L⁶ and H₄L⁸ was obtained by isolation of the corresponding species of type H₄Lⁿ·2Ba(ClO₄)₂ (n = 6 or 8) as ‘intermediates’ before generation of the respective metal-free macrocycles. Reaction of zinc(II) acetate with the free macrocycles in methanol yielded complexes of type [Zn₂Lⁿ] in all cases. A related non-cyclic ligand, H₂L⁰ and its corresponding mononuclear complex, [ZnL⁰]·H₂O, were also synthesised and its spectral properties compared with those of the macrocyclic derivatives. The elemental analyses, ¹H NMR, IR, UV–Vis and MS spectra of the respective zinc complexes in each case were in accord with the formation of the expected 2:2 condensation product. The results of DFT calculations to probe aspects of the electronic and structural natures of both H₂L¹ and H₄L⁴ are briefly presented.     

Synthesis,structure and properties of supramolecular Mn,Co, Ni and Zn complexes containing Salen-type bisoxime ligands

Four supramolecular complexes [MnL¹(H₂O)₂] (1), {[CoL²(OAc)(H₂O)]₂Co}·5CH₃CH₂OH (2), {[NiL³(OAc)(CH₃OH)]₂Ni}·2CH₃COCH₃·2CH₃OH (3) and {[ZnL²(OAc)]₂Zn}·CHCl₃ (4), have been synthesized and characterized by elemental analyses, IR, UV–Vis spectra and X-ray diffraction techniques. All the complexes have the trinuclear configuration except for Mn^II complex being mononuclear configuration. Every trinuclear complex contains two acetate ions coordinate to the three metal ions via a familiar M–O–C–O–M (M = Co, Ni, Zn) coordinated mode. Although complexes 1 and 3 display 1D supramolecular chains, the different coordination environments (mononuclear in 1, trinuclear in 3) provoke divergence in the structures and aggregations of the chain subunits. Complex 2 forms a 3D hydrogen-bonding supramolecular networks possessing a channel composing of six O–H···O hydrogen bonds, while complex 4 exhibits a 2D hydrogen-bonding supramolecular networks with the formation of “grottos” occupied by chloroform molecules through intermolecular hydrogen-bond interactions. The spectral properties of the title complexes have been further discussed in detail.     

Synthesis,characterization and thermal decomposition of uranyl propionate complexes with Zn,Mn, Ni and Co

Journal of Thermal Analysis and Calorimetry - Uranyl propionate complexes of Zn(II), Mn(II), Ni(II) and Co(II), of the general formula M[(C2H5COO)3UO2]2 · nH2O, have been synthesized and...     

Dinuclear copper(I) complexes with hexaaza macrocyclic dinucleating ligands: structure and dynamic properties

The synthesis and structural and spectroscopic characterization of a family of copper(I) complexes, containing a dinucleating hexaaza macrocyclic ligand, of general formula [Cu(2)(L)(X)(2)](2+) (L = Me2p, Me2m, Me3p, or Me3m; X = MeCN, n-PrCN, CO, t-BuNC, or PPh(3)) is described. This family of complexes contains ligands that differ from one another in the number of methylenic units linking the tertiary amines and in the meta or para substitution of their aromatic rings. The structural characterization in the solid-state includes a single-crystal X-ray diffraction analysis of [Cu(2)(Me2p)(CO)(2)](2+) and of [Cu(2)(Me2m)(t-BuNC)(2)](2+). In solution, those complexes are structurally characterized through NMR spectroscopy that also allows us to put forward and establish their fluxional behavior. Theoretical calculations at the DFT level have also been performed in order to further analyze the relative energy of the different potential isomers as well as to gain insight into their chemical properties. Finally, the influence of the hexaaza ligands over different structural aspects as well as on its potential chemical reactivity is discussed.     

Mass spectrometric studies on small open-chain piperazine-containing ligands and their transition metal complexes

Electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry was used to characterize the complexes formed between open-chain piperazine-containing ligands and transition metal salts (Cobalt, Copper, Zinc, and Cadmium as chlorides, nitrates, and acetates). Only single-charged complexes were observed, formed of one ligand (L) and mainly one metal ion (M). Since the net charge of the complexes was one, a counterion (X) was attached to some of the complexes, with formation of [L + M + X]+ complexes, and a proton was lost from others, as in [L - H + M]+ complexes. In most cases the composition of the complexes was more dependent on the ligand than the metal salt. Collision-induced dissociation measurements showed that complexes with related composition often differed in structure, or that interactions between the ligand and the metal ion were not alike. The metal ion influenced considerably the fragmentation pathways of the ligands, so that the fragmentation products could be used to deduce the binding sites of the metal. The variations observed in fragmentation behavior of complexes possessing the same ligand but different metal ions can mostly be explained by the ionic radius and electronic configuration of the metal ion. The results indicated a preference of the piperazine ring of the coordinated ligand for the boat conformation.     

Preparation and characterization of asymmetric alpha-alkoxy dipyrrin ligands and their metal complexes

Asymmetric alpha-substituted dipyrrins have been synthesized and characterized. The compounds were formed by a metal mediated reaction involving a single alkoxy group substituted into the alpha-position of an alpha,beta-unsubstituted dipyrrin. An alpha-methoxy dipyrrin, 5-(4-cyanophenyl)-1-methoxydipyrrin (alpha-OMe-4-cydpm), was prepared from 5-(4-cyanophenyl)-4,6-dipyrromethane. Methoxy, ethoxy, and propoxy derivatives (alpha-OMe-4-mecdpm, alpha-OEt-4-mecdpm, alpha-OPr-4-mecdpm) of 5-(4-methoxycarbonylphenyl)-4,6-dipyrromethane have also been prepared. A homoleptic, bis(1-methoxy)dipyrrinato zinc(II) complex, [Zn(alpha-OMe-4-mecdpm)(2)], has been synthesized, as has a heteroleptic cobalt(III) complex with one alpha-OMe-4-cydpm ligand and two unsubstituted 5-(4-cyanophenyl)dipyrrin (4-cydpm) ligands ([Co(alpha-OMe-4-cydpm)(4-cydpm)(2)]). The rotational barrier of the meso-aryl substituent of [Zn(alpha-OMe-4-mecdpm)(2)] was found to be 17.3 kcal mol(-1) by variable-temperature NMR spectroscopy. The compounds alpha-OMe-4-cydpm and [Zn(alpha-OMe-4-mecdpm)(2)] have also been characterized by X-ray diffraction. The formation of the new dipyrrin derivatives is shown to be general and can be performed on dipyrrins with various meso-aryl substitutents, with a variety of alcohols, and can be promoted by several metal salts.     

Preparation, UV-vis, IR, EPR and resonance Raman study of Fe, Ni, Co and Zn dioxolene complexes

An UV-vis, Raman, IR and EPR spectroscopic study was performed for the water soluble complexes of Fe(III), Ni(II), Co(II) and Zn(II) coordinated to dioxolene ligands derived from oxidized dopamine. The complexes were obtained and stabilized at neutral pH by the strong reducing agent sodium thiosulfate. Iron(III) stabilizes the ligand in catecholate form as [Fe(III)(Cat)2]1-, Cat=dopacatecholate, and the divalent metals as dopasemiquinone (SQ): [Ni(SQ)3]1-, [Co(SQ)3]1- and [Zn(SQ)3]1-. The resonance Raman spectra of the solid complexes as [CAT][Ni(SQ)3], [CTA][Co(SQ)3] and [CTA][Zn(SQ)3], CTA is the cetyltrimethylammonium, are very similar to the spectra of the complexes in solution, while the Fe(III) complex is a mixture of two iron complexes, with catecholate or dopasemiquinone ligands.     

Syntheses and structural characterization of dinuclear and tetranuclear iron(III) complexes with dinucleating ligands and their reactions with hydrogen peroxide

The iron(III) complexes [Fe(2)(HPTB)(mu-OH)(NO(3))(2)](NO(3))(2).CH(3)OH.2H(2)O (1), [Fe(2)(HPTB)(mu-OCH(3))(NO(3))(2)](NO(3))(2).4.5CH(3)OH (2), [Fe(2)(HPTB)(mu-OH)(OBz)(2)](ClO(4))(2).4.5H(2)O (3), [Fe(2)(N-EtOH-HPTB)(mu-OH)(NO(3))(2)](ClO(4))(NO(3)).3CH(3)OH.1.5H(2)O (4), [Fe(2)(5,6-Me(2)-HPTB)(mu-OH)(NO(3))(2)](ClO(4))(NO(3)).3.5CH(3)OH.C(2)H(5)OC(2)H(5).0.5H(2)O (5), and [Fe(4)(HPTB)(2)(mu-F)(2)(OH)(4)](ClO(4))(4).CH(3)CN.C(2)H(5)OC(2)H(5).H(2)O (6) were synthesized (HPTB = N,N,N',N'-tetrakis(2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane, N-EtOH-HPTB = N,N,N',N'-tetrakis(N' '-(2-hydroxoethyl)-2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane, 5,6-Me(2)-HPTB = N,N,N',N'-tetrakis(5,6-dimethyl-2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane). The molecular structures of 2-6 were established by single-crystal X-ray crystallography. Iron(II) complexes with ligands similar to the dinucleating ligands described herein have been used previously as model compounds for the dioxygen uptake at the active sites of non-heme iron enzymes. The same metastable (mu-peroxo)diiron(III) adducts were observed during these studies. They can be prepared by adding hydrogen peroxide to the iron(III) compounds 1-6. Using stopped-flow techniques these reactions were kinetically investigated in different solvents and a mechanism was postulated.     

Synthesis,characterization, and catalytic activity of heterometallic ion-pair Ni/Mn and Ni/Zn complexes

Two new heterometallic compounds, [Ni(bpy)₃][Mn(NCO)₄]·H₂O (1) and [Ni(phen)₃]₂[Zn(NCO)₄]₂·4DMSO·H₂O (2) [bpy?=?2,2′-bipyridine and phen?=?1,10-phenanthroline], have been synthesized and characterized. The structures of 1 and 2 were solved by single-crystal X-ray diffraction analysis. The cationic moieties of [Ni(bpy)₃]²⁺ in 1 and [Ni(phen)₃]²⁺ in 2 show octahedral environments around Ni(II), whereas the anionic groups of [Mn(NCO)₄]^2? in 1 and [Zn(NCO)₄]^2? in 2 exhibit tetrahedral geometry around the Mn(II) and Zn(II), respectively. Both compounds are catalysts in the H/D exchange of salicylaldehyde in DMSO-d₆ which takes place under mild conditions and short reaction time.     

Preparation and characterization of uranyl complexes with phosphonate ligands

The preparation, spectroscopic characterization and thermal stability of neutral complexes of uranyl ion, UO₂ ²⁺, with phosphonate ligands, such as diphenylphosphonic acid (DPhP), diphenyl phosphate (DPhPO) and phenylphosphonic acid (PhP) are described. The complexes were prepared by a reaction of hydrated uranyl nitrate with appropriate ligands in methanolic solution. The ligands studied and their uranyl complexes were characterized using thermogravimetric and elemental analyses, ESI-MS, IR and UV–Vis absorption and luminescence spectroscopy as well as luminescence lifetime measurements. Compositions of the products obtained dependent on the ligands used: DPhP and DPhPO form UO₂L₂ type of complexes, whereas PhP forms UO₂L complex. Based on TG and DTG curves a thermal stability of the complexes was determined. The complexes UO₂PhP·2H₂O and UO₂(DPhPO)₂ undergo one-step decomposition, while UO₂PhP · 2H₂O is decomposed in a two-step process. The thermal stability of anhydrous uranyl complexes increases in the series: DPhPO < PhP < DPhP. Obtained IR spectra indicate bonding of P–OH groups with uranyl ion. The main fluorescence emission bands and the lifetimes of these complexes were determined. The complex of DPhP shows a green uranyl luminescence, while the uranyl emission of the UO₂PhP and UO₂(DPhPO)₂ complexes is considerably weaker.     

Co(II) and Ni(II) complexes with Schiff base ligands: Synthesis,characterization, and biological activity

The ligands, 1-acetylferrocenehydrazinecarboxamide (HL¹) and 1-acetylferrocenehydrazinecarbothioamide (HL²), and their Ni(II) and Co(II) complexes were synthesized. The properties of the synthesized compounds were determined by the elemental and spectroscopic analyses. Ni(II) and Co(II) acetates interact with the ligands at the molar ratios 1 : 1 and 1 : 2 to give coloured products. The complexes have octahedral geometry. The ligands are coordinated to Co(II) and Ni(II) centers via the azomethine nitrogen and thiolic sulfur /enolic oxygen atom. The ligands and their Co(II) and Ni(II) complexes were screened for antibacterial and antifungal activities. The Co(II) and Ni(II) complexes show enhanced inhibitory activity as compared to their parent ligands. The DNA cleavage activity of the Co(II) and Ni(II) complexes was determined by gel electrophoresis. It was shown that the complexes have better cleavage activity than the ligands. The antioxidant activity of the complexes was also evaluated and used to examine their scavenging ability on hydrogen peroxide.     

Co(II) and Ni(II) complexes with imidazole-containing ligands: Synthesis,structural characterization,and magnetic property

Hydrothermal reaction of Co(II) salt with 1,4-di(1-imidazolyl)benzene (L¹) and 4,4’-oxydiphthalic acid (H₄OA) yields a new complex [Co₃(HOA)₂(L¹)₄(H₂O)₄] (I). [Ni(L²)₂SO₄] · 0.5H₂O (II) can be obtained via the hydrothermal reaction of NiSO₄ · 6H₂O with 1,3-di(1H-imidazol-4-yl)benzene (L²). Complexes I and II have been characterized by single-crystal and powder X-ray diffraction (CIF files CCDC nos. 1019291 (I) and 1019292 (II)), IR, elemental, and thermogravimetric analyses. Complex I exhibits the uninodal six-connected 3D pcu framework structure of I with (4¹² · 6³) topology; Complex II consists of the uninodal four-connected 2D sql (4⁴ · 6²) networks. In addition, magnetic property of I was investigated.     

Neutral pyridylmethylamide ligands and their mononuclear copper(II) complexes

Mononuclear copper(II) complexes of a family of pyridylmethylamide ligands HL, HL^Me, HL^Ph, HL^Me3 and HL^Ph3, [HL = N-(2-pyridylmethyl)acetamide; HL^Me = N-(2-pyridylmethyl)propionamide; HL^Ph = 2-phenyl-N-(2-pyridylmethyl)acetamide; HL^Me3 = 2,2-dimethyl-N-(2-pyridylmethyl)propionamide; HL^Ph3 = 2,2,2-triphenyl-N-(2-pyridylmethyl)acetamide], were synthesized and characterized. The reaction of copper(II) salts with the pyridylmethylamide ligands yields complexes [Cu(HL)₂(OTf)₂] (1), [Cu(HL^Me)₂](ClO₄)₂ (2), [Cu(HL)₂Cl]₂[CuCl₄] (3), [Cu(HL^Me3)₂(THF)](OTf)₂ (4), [Cu(HL^Me3)₂(H₂O)](ClO₄)₂ (5a and 5b), [Cu(HL^Ph3)₂(H₂O)](ClO₄)₂ (6), [Cu(HL)(2,2′-bipy)(H₂O)](ClO₄)₂ (7), and [Cu(HL^Ph)(2,2′-bipy)(H₂O)](ClO₄)₂ (8). All complexes were fully characterized, and the X-ray structures vary from four-coordinate square-planar, to five-coordinate square-pyramidal or trigonal-bipyramidal. The neutral ligands coordinate via the pyridyl N atom and carbonyl O atom in a bidentate fashion. The spectroscopic properties are typical of mononuclear copper(II) species with similar ligand sets, and are consistent their X-ray structures.     

Crystal and molecular structures of related nickel(II) complexes of open-chain and macrocyclic oxamide-based ligands and the peculiarities of water aggregates in their crystal lattices

A comparison of the molecular structure of related nickel(II) complexes of the open-chain and 13-membered macrocyclic oxamide-derived ligands NiL(1).4H2O and NiL(2).3H2O revealed that the formation of an additional 6-membered chelate ring in the complex results in rather small changes in the molecular structure of the ligands and the bite angles around the metal ion. Two deprotonated amide and two amine donors form an approximately square planar environment for the nickel(II) in both complexes and the only essential consequence of ligand cyclization is the contraction of the nickel-nitrogen distances by 0.012 and 0.021 A for the Ni-N(amide) and Ni-N(amine) bonds, respectively. The packing modes of NiL(1) and NiL(2) in the crystalline state are essentially different--lattice water molecules form isolated monomolecular 2D sheets separating and gluing the metallocomplex layers in the former complex, while they are included in the formation of hybrid metallocomplex-water layers connected by van der Waals interactions in the latter. Analysis of the 1H NMR spectra reveals that the solid state conformation of the macrocyclic complex is retained in aqueous solution.     

Preparation, characterization, and reactivities of thienyl nickel complexes bearing indenyl ligands

The complexes (1-R, 2-R′-indenyl)NiPPh₃(thienyl) (R′=H, R=Me (1); Et (2); i-Pr (3); CH₂Ph (4); R′=Ph, R=Me (5)) have been prepared and characterized by spectroscopic techniques and, in the case of 1, 2 and 5, by X-ray crystallographic studies. When combined with MAO, these compounds catalyze the polymerization of phenylacetylene to cis-transoidal poly(phenylacetylene) with M_w in the range of 5-7.5×10⁴ Da. NMR studies have revealed that MAO methylates these complexes without ionizing the Nithienyl bond; this implies that the polymerization reactions likely follow a non-cationic mechanism similar to that catalyzed by the corresponding NiCCPh complexes studied previously. Complexes 1-5 reacted with CF₃SO₃H to produce the corresponding NiOSO₂CF₃ compounds by protonation at the α-C of the thienyl moiety. The compound (1-Bzindenyl)Ni(PPh₃)(OSO₂CF₃) (9) has been isolated and fully characterized.     

Coordination-position isomeric M(II)Cu(II) and Cu(II)M(II) (M = Co, Ni, Zn) complexes derived from macrocyclic compartmental ligands

The dinucleating macrocyclic ligands (L(2;2))(2-) and (L(2;3))(2-), comprised of two 2-[(N-methylamino)methyl]-6-(iminomethyl)-4-bromophenolate entities combined by the -(CH(2))(2)- chain between the two aminic nitrogen atoms and by the -(CH(2))(2)- or -(CH(2))(3)- chain between the two iminic nitrogen atoms, have afforded the following M(II)Cu(II) complexes: [CoCu(L(2;2))](ClO(4))(2).MeCN (1A), [NiCu(L(2;2))](ClO(4))(2) (2A), [ZnCu(L(2;2))](ClO(4))(2).0.5MeCN.EtOH (3A), [CoCu(L(2;3))(MeCN)(2-PrOH)](ClO(4))(2) (4A), [NiCu(L(2;3))](ClO(4))(2) (5A), and [ZnCu(L(2;3))](ClO(4))(2).1.5DMF (6A). [CoCu(L(2;2))(MeCN)(3)](ClO(4))(2) (1A') crystallizes in the monoclinic space group P2(1)/n, a = 11.691(2) A, b = 18.572(3) A, c = 17.058(3) A, beta= 91.18(2) degrees, V = 3703(1) A(3), and Z = 4. [NiCu(L(2;2))(DMF)(2)](ClO(4))(2) (2A') crystallizes in the triclinic space group P(-)1, a = 11.260(2) A, b = 16.359(6) A, c = 10.853(4) A, alpha= 96.98(3) degrees, beta= 91.18(2) degrees, gamma= 75.20(2) degrees, V = 1917(1) A(3), and Z = 2. 4A crystallizes in the monoclinic space group P2(1)/c, a = 15.064(8) A, b = 11.434(5) A, c = 21.352(5) A, beta= 95.83(2)degrees, V = 3659(2) A(3), and Z = 4. The X-ray crystallographic results demonstrate the M(II) to reside in the N(amine)(2)O(2) site and the Cu(II) in the N(imine)(2)O(2) site. The complexes 1-6 are regarded to be isomeric with [CuCo(L(2;2)))](ClO(4))(2).DMF (1B), [CuNi(L(2;2)))](ClO(4))(2).DMF.MeOH (2B), [CuZn(L(2;2)))](ClO(4))(2).H(2)O (3B)), [CuCo(L(2;3)))](ClO(4))(2).2H(2)O (4B), [CuNi(L(2;3)))](ClO(4))(2) (5B), and [CuZn(L(2;3)))](ClO(4))(2).H(2)O (6B) reported previously, when we ignore exogenous donating and solvating molecules. The isomeric M(II)Cu(II) and Cu(II)M(II) complexes are differentiated by X-ray structural, magnetic, visible spectroscopic, and electrochemical studies. The two isomeric forms are significantly stabilized by the "macrocyclic effect" of the ligands, but 1A is converted into 1B on an electrode, and 2A is converted into 2B at elevated temperature.     

Preparation, characterization and structure of ruthenium phosphine complexes containing non-innocent ligands

Phosphine ruthenate complexes containing the non-innocent ligands 4-chloro-1,2-phenylenediamine (opda-Cl) and 3,3′,4,4′-tetraamminebiphenyl (diopda) were synthesized and characterized by means of X-ray diffraction, electrochemistry, ³¹P{¹H} NMR and electronic spectroscopies. Crystals of cis-[RuCl₂(dppb)(bqdi-Cl)] complex were isolated as a mixture of two conformational isomers due to different positions of the chlorine atoms of the o-phenylene ligand in relation to the P1 atom of the phosphine moiety.     

Coordination chemistry of dinucleating P2N2S ligands: preparation and characterization of cationic palladium complexes

The thioethers (4-tert-butyl-2,6-bis((2-(diphenylphosphino)ethylimino)methyl)phenyl)(tert-butyl)sulfane (tBuL3) and (4-tert-butyl-2,6-bis((2-(diphenylphosphino)ethylamino)methyl)phenyl)(tert-butyl)sulfane (tBuL4) react readily with [Pd(NCMe)2Cl2] to give the dinuclear palladium thiophenolate complexes [(L3)Pd2(Cl)2]+ and [(L4)Pd2(micro-Cl)]2+ (HL3=2,6-bis((2-(diphenylphosphino)ethylimino)methyl)-4-tert-butylbenzenethiol, HL4=2,6-bis((2-(diphenylphosphino)ethylamino)methyl)-4-tert-butylbenzenethiol). The chlorides in could be replaced by neutral (MeCN) and anionic ligands (NCS-, N3-, I-, CN-) to give the dinuclear PdII complexes [(L3)Pd2(NCMe)2]3+, [(L3)Pd2(SCN)2]+, [(L3)Pd2(N3)2]+, [(L3)Pd2(I)2]+, and [(L3)Pd2(CN)2]+. The acetonitrile ligands in are readily hydrated to give the corresponding amidato complex [(L3)Pd2(NHCOMe)]2+. All complexes were isolated as perchlorate salts and studied by infrared, 1H, and 31P NMR spectroscopy. In addition, complexes [ClO4].EtOH, [ClO4]2, [ClO4], [ClO4].EtOH, and [ClO4]2.MeCN.MeOH have been characterized by X-ray crystallography. The dipalladium complex was found to catalyse the vinyl-addition polymerization of norbornene in the presence of MAO (methylalumoxane) and B(C6F5)3/AlEt3.     

Preparation,characterization of some transition metal complexes of hydrazone derivatives and their antibacterial and antioxidant activities

A new series of metal complexes of Pd(II), Cd(II) and Cu(II, I) of polydentate Schiff base ligand (H₂L), namely ((Z)-2-(phenylamino)-N'-(thiophen-2-ylmethylene) acetohydrazide) have been prepared. The ligand and its metal complexes have been characterized based on various physicochemical studies as elemental analyses, molar conductance, spectral (UV–Vis, MS, IR, ¹H NMR, ¹³C NMR and XRD), magnetic moment measurements and thermal studies (TG, DTG). In the view of previous studies, the ligand (H₂L) acts as polydentate one and coordinates with metal ions to form all metal complexes. The kinetic and thermodynamic parameters of decomposition process (ΔG, ΔH, ΔS) were calculated. The possible structures of the metal complexes have been computed using the molecular mechanic calculations using the hyper chem. 8.03 molecular modeling program. The calculations are performed to obtain the optimized molecular geometry. The antibacterial study of the selected compounds was assayed against two pathogenic bacteria. Moreover, the complexes (Cu II, I), Cd(II), Pd(II)) and the ligand revealed excellent antioxidant properties and could be useful in fighting the free radicals which occur in close connection with cancerous cells. It was remarkable that the two complexes (Cu II, I) demonstrated stronger antioxidant effects than their parent compounds. It is clear that the new complexes are good active compounds for use in a variety of applications.