Solution properties of poly(amic acid)–NMP containing LiCl and their effects on membrane morphologies

Physical properties of poly(amic acid) (PAA) casting solutions in N-methyl-2-pyrrolidone (NMP) containing lithium chloride (LiCl) were characterized by viscometry and dynamic light scattering (DLS) and were related to the morphological properties of asymmetric membranes prepared from these solutions. At a fixed polymer concentration, the increase in viscosity of the PAA solutions with increasing LiCl content is mainly determined by the viscosity of the salt–solvent medium, implying that the LiCl–NMP interactions are stronger than those between LiCl and PAA. Because of the strong salt–solvent interactions, complexes between LiCl and NMP are formed. The complexes reduce the solvent power of NMP for PAA inducing polymer aggregation (clustering) and/or transient cross-links in the solutions. Dynamic light scattering results for salt-containing solutions at low PAA concentrations support the existence of these aggregations. Solutions without salt showed a single relaxation, but solutions with LiCl exhibit multiple relaxation modes; two diffusional modes of cooperative and aggregates, and one angle independent transient network mode. The polymer aggregates and transient cross-links form a gel-like structure in the casting solution film and hinder macrovoid formation during phase inversion, resulting in asymmetric membranes with a primarily sponge-like structure.     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.     

Self‐assembled complexes of poly(acrylic acid) and poly(styrene)‐block‐poly(4‐vinyl pyridine)

Polymer complexes were prepared from high molecular weight poly(acrylic acid) (PAA) and poly(styrene)‐block‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) in dimethyl formamide (DMF). The hydrogen bonding interactions, phase behavior, and morphology of the complexes were investigated using Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this A‐b‐B/C type block copolymer/homopolymer system, P4VP block of the block copolymer has strong intermolecular interaction with PAA which led to the formation of nanostructured micelles at various PAA concentrations. The pure PS‐b‐P4VP block copolymer showed a cylindrical rodlike morphology. Spherical micelles were observed in the complexes and the size of the micelles increased with increasing PAA concentration. The micelles are composed of hydrogen‐bonded PAA/P4VP core and non‐bonded PS corona. Finally, a model was proposed to explain the microphase morphology of complex based on the experimental results obtained. The selective swelling of the PS‐b‐P4VP block copolymer by PAA resulted in the formation of different micelles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1192–1202, 2009     

Thermal degradation of [poly(N-vinylimidazole)-polyacrylic acid] interpolymer complexes

Interpolymer complexes of a slightly basic polymer, poly(N-vinylimidazole) (PVIm) with a strongly acidic polymer, poly(acrylic acid) (PAA) have been prepared by mixing aqueous solutions of the respective components. Spectroscopy and thermal methods were used to reveal interaction between VIm and AA moieties. FT-IR analysis showed that the nitrogen atoms at 3rd position of imidazole ring are involved in strong H-bonding with acid groups of PAA leading to a uniform and fully miscible complex structure. As the quantity of PAA increases the thermal stability of complex increases based on TG results. In the DSC analyses, the single T_g for all IPC samples showed that IPCs have good or definite miscibility over the whole range of composition as a result of H-bond formation between acrylic acid and imidazole units.     

About the compatibility of polymer components in polymer complexes based on poly(acrylamide) and poly(vinyl alcohol)

The issue of applying the usual concepts of polymer compatibility to nonstoichiometric PVA/PAA mixtures of chemically complementary poly(vinyl alcohol) and poly(acrylamide), which form in water solution InterPC (intermolecular polymer complex) stabilyzed by H‐bonds, and PAA to PVA graft copolymers (PVA‐PAA_N) with different grafted chains number N, that are IntraPC (intramolecular polymer complexes) is discussed. PVA and PAA are compatible on molecular level. At the same time PVA/PAA mixture (50/50 W/W) is characterized by heterogeneous structure consists of InterPC with ϕ_char=9g_PVA/g_PAA and the excess of unconnected PAA. In the case of IntraPC, yet, only PVA‐PAA_N, where N=25, is characterized by a single glass transition temperature (Tg). At larger values of N separate PAA domains form giving rise to the corresponding Tg. These results are discussed in view of IntraPC structure peculiarities as a function of N investigated by IR spectroscopy.     

Interpolymer complexation and thermal behaviour of poly(styrene-co-maleic acid)/poly(vinyl pyrrolidone) mixtures

Polymer complexation between poly(styrene-co-maleic acid), (SMA28) and (SMA50) containing 28 and 50 mol% of maleic acid and poly(vinyl pyrrolidone) (PVP), has been investigated by differential scanning calorimeter (DSC), Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). All results showed that the ideal complex composition of SMA28/PVP and SMA50/PVP leads, respectively, to 2:1 and 1:1 mole ratio of interacting components.For the investigated systems, the T_g versus composition curve does not follow any of the usual proposed models for polymer blends. Withal, a new model proposed by Cowie et al. is used to fit the T_g data and it is found to reproduce the experimental results more closely. According to n and q obtained values, it seems reasonable to conclude that the inter-associated hydrogen bonds dominate in SMA28/PVP (2:1) complexes. This effect is corroborated by the FTIR study as evidenced by the high displacement of the specific bands and ionic interactions have been clearly identified. Finally, a thermogravimetric study shows that ionic interactions increase the thermal stability of these complexes.     

The miscibility of poly(vinyl alcohol)/poly(N-vinylpyrrolidone) blends investigated in dilute solutions and solids

Poly(vinyl alcohol) (PVA) (polymer A) and poly(N-vinylpyrrolidone) (PVP) (polymer B) are known to form a thermodynamically miscible pair. In the present study the conclusion on miscibility of PVA/PVP solid blends, confirmed qualitatively (DMTA, FTIR) and quantitatively (DSC, χ_AB = − 0.69 at 503 K) is compared with the miscibility investigations of PVA/PVP solution blends by the technique of dilute solution viscometry. The miscibility of the ternary (polymer A/ polymer B/ solvent) system is estimated on the basis of experimental and ideal values of the viscosity parameters k, b and [η]. It is found that the conclusions on miscibility or nonmiscibility drawn from viscosity measurements in dilute solution blends depend: (i) on the applied extrapolation method used for the determination of the viscosity interaction parameters, (ii) on the assumed definition of the ideal values and (iii) on the thermodynamic quality of the solvent, which in the case of PVA depends on its degree of hydrolysis. Hence, viscometric investigations of dilute PVA/PVP solution blends have revealed that viscometry, widely used in the literature for estimation of polymer-polymer miscibility can not be recommended as a sole method to presume the miscibility of a polymer pair.     

Synthesis of high-performance superabsorbent glycerol acrylate-cross-linked poly (acrylic acid)

Glycerol acrylate (GA) is synthesised by an acryloylation reaction with acryloyl chloride. An ester was used as a cross-linking agent at varying proportions in the synthesis of poly acrylic acid (PAA). The amount of cross-linking density in the product (GA-PAA) and degree of neutralisation determine the absorbency of the polymer samples. A sample of GA-PAA containing 0.8 % GA was discovered to absorb 395 and 66 g/g of water and saline solution, respectively. Different solvent uptakes were tested with the sample showing varying capacity for different solvents. The temperature of the reaction was maintained at 60 °C and a reaction time of 2½ h. FTIR, TGA, SEM and XRD analyses were used to characterise the products.     

Interface hydrogen-bonded core-shell nanofibers by coaxial electrospinning

Core-shell nanofibers were prepared by coaxial electrospinning technology,with poly(ethylene oxide) (PEO) as the core while poly(acrylic acid) (PAA) as the shell.PEO and PAA can form polymer complexes based on hydrogen bonding.In order to avoid forming strong hydrogen bonding complexes at nozzle and blocking spinning process,a polar aprotic solvent,N,N-dimethylformamide (DMF),was selected to dissolve PEO and PAA respectively.SEM,TEM and DSC were utilized to characterize the morphology and structure of PEO-PAA core-shell nanofibers.FTIR spectra demonstrated that hydrogen bonding was formed at the core-shell interface.In addition,the PAA shell of the nanofibers can be cross-linked by ethylene glycol (EG) under heat treatment,which increases the stability and extends the potential applications in aqueous environment.     

Cellular responses to patterned poly(acrylic acid) brushes

We use patterned poly(acrylic acid) (PAA) polymer brushes to explore the effects of surface chemistry and topography on cell-surface interactions. Most past studies of surface topography effects on cell adhesion have focused on patterned feature sizes that are larger than the dimensions of a cell, and PAA brushes have been characterized as cell repellent. Here we report cell adhesion studies for RBL mast cells incubated on PAA brush surfaces patterned with a variety of different feature sizes. We find that when patterned at subcellular dimensions on silicon surfaces, PAA brushes that are 30 or 15 nm thick facilitate cell adhesion. This appears to be mediated by fibronectin, which is secreted by the cells, adsorbing to the brushes and then engaging cell-surface integrins. The result is detectable accumulation of plasma membrane within the brushes, and this involves cytoskeletal remodeling at the cell-surface interface. By decreasing brush thickness, we find that PAA can be 'tuned' to promote cell adhesion with down-modulated membrane accumulation. We exemplify the utility of patterned PAA brush arrays for spatially controlling the activation of cells by modifying brushes with ligands that specifically engage IgE bound to high-affinity receptors on mast cells.     

Novel conducting polymer electrolyte biosensor based on poly(1-vinyl imidazole) and poly(acrylic acid) networks

Biosensor construction and characterization studies of poly(acrylic acid) (PAA) and poly(1-vinyl imidazole) (PVI) complex systems have been carried out. The biosensors were prepared by mixing PAA with PVI at several stoichiometric ratios, x (molar ratio of the monomer repeat units). The enzyme, invertase, was entrapped in the PAA/PVA interpenetrating polymer networks during complexation. Modifications were made on the PAA/PVI conducting polymer electrolyte matrixes to improve the stability and performance of the polymer electrolyte-based enzyme biosensor. The maximum reaction rate (V(max)) and Michaelis-Menten constant (K(m)) were investigated for the immobilized invertase. The temperature and pH optimization, operational stability, and shelf life of the polymer electrolyte biosensor were also examined.     

Preparation and swelling behavior of amphoteric superabsorbent composite with semi-IPN composed of poly(acrylic acid)/Ca-bentonite/poly(dimethyldiallylammonium chloride)

Amphoteric superabsorbent composite with semi-interpenetrating polymer networks (semi-IPN) composed of poly(acrylic acid) (PAA)/Ca-bentonite/poly(dimethyldiallylammonium chloride) (PDMDAAC) was prepared by a combination of intercalative polymerization and a sequential IPN method and the effects of reaction parameters on the swelling capacity were studied. PDMDAAC was used as a polycation to modify bentonite and form semi-IPN with lightly crosslinked PAA. FTIR and TG were used to characterize the amphoteric superabsorbent composites with semi-IPN. The thermal stability of the product was not degraded as in the case of using small molecular surfactant to modify bentonite. The contents of carboxylic groups and nitrogen had been determined. This indicated that the product with certain content of carboxylic groups and nitrogen is inclined to exhibit excellent swelling capacity. The presence of PDMDAAC improved the swelling capacity. The resulting amphoteric superabsorbent composite showed excellent swelling capacity of 1578 g/g in distilled water and 136 g/g in 0.9 wt% NaCl solution. Copyright © 2007 John Wiley & Sons, Ltd.     

Spin label study of phase morphology and polymer segmental motion in poly(acrylic acid)–poly(ethylene oxide) complex

The ESR lineshapes of nitroxide radical end‐labeled on poly(ethylene oxide) (SLPEO) for the pure polymer and for different weight ratio complexes with poly(acrylic acid) (PAA) were studied as a function of temperature. For SLPEO one spectral component was detected in the entire temperature range, indicating that the spin label was in the homogeneous phase domain. For all PAA–PEO complexes two spectral components with different rates of motion, a ‘fast’ and a ‘slow’ component, were observed, which indicates the existence of microheterogeneity at the molecular level: the more mobile the PEO‐rich microphase, the more rigid is the PAA‐rich microphase. On the other hand, the SLPEO polymer segmental motion was restricted owing to the hydrogen bond interaction between the carboxyl proton in PAA and the ether oxygen in PEO. This restriction was exacerbated with increasing the PAA content in the complex, which could be further substantiated through the calculated S and τ_c values. Copyright © 2003 John Wiley & Sons, Ltd.     

Polyelectrolyte complexes of soluble poly-2-[(methacryloyloxy)ethyl]trimethylammonium chloride and its hydrogels with poly(acrylic acid)

The complex formation of poly-2-[(methacryloyloxy)-ethyl]trimethylammonium chloride (PMADQUAT) with poly(acrylic acid) (PAA) of different molecular weights has been studied in aqueous solutions by potentiometric, viscometric, turbidimetric and FTIR spectroscopic methods. The formation of insoluble non-stoichiometric polyelectrolyte complexes has been shown. The stability of polyelectrolyte complexes in solutions of different pH and ionic strength has been evaluated. The formation of polyelectrolyte complexes between hydrogels of PMADQUAT and linear PAA of different molecular weights has been studied. It was shown that the molecular weight of PAA considerably affects the kinetics of interaction as well as the final state of gel-polymer complex.     

Physically cross‐linked networks of POSS‐capped poly(acrylate amide)s: Synthesis,morphologies, and shape memory behavior

In this work, we synthesized a novel organic–inorganic semitelechelic polymer from polyhedral oligomeric silsesquioxane (POSS) and poly(acrylate amide) (PAA) via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The organic–inorganic semitelechelic polymers have been characterized by means of nuclear magnetic resonance spectroscopy, thermal gravimetric analysis, and dynamic mechanical thermal analysis. It was found that capping POSS groups to the single ends of PAA chains caused a series of significant changes in the morphologies and thermomechanical properties of the polymer. The organic–inorganic semitelechelics were microphase‐separated; the POSS microdomains were formed via the POSS–POSS interactions. In a selective solvent (e.g., methanol), the organic–inorganic semitelechelics can be self‐assembled into the micelle‐like nanoobjects. Compared to plain PAA, the POSS‐capped PAAs significantly displayed improved surface hydrophobicity as evidenced by the measurements of static contact angles and surface atomic force microscopy. More importantly, the organic–inorganic semitelechelics displayed typical shape memory properties, which was in marked contrast to plain PAA. The shape memory behavior is attributable to the formation of the physically cross‐linked networks from the combination of the POSS–POSS interactions with the intermolecular hydrogen‐bonding interactions in the organic–inorganic semitelechelics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 587–600     

FTIR study on molecular structure of poly(N-isopropylacrylamide) in mixed solvent of methanol and water

The intrachain and interchain hydrogen bonding of poly(N-isopropylacrylamide) (PNIPA) and intermolecular hydrogen bonding between PNIPA chains and the solvent molecules in the mixed solvent of methanol and water have been quantitatively investigated by using Fourier transform infrared (FTIR) spectroscopy at 25 °C. In this spectroscopic system with curve fitting program, we found that in the C-H stretching region, both the N-isopropyl group and the backbone underwent conformational change upon the solvent composition. An analysis of the amide I band suggested that the amide groups of PNIPA were mainly involved in intermolecular hydrogen bonding with water molecules, and the polymer chains were flexible and disordered in the mixed solvent when the methanol volume fraction (χ_v) was lower than 15%. While χ_v was in the range of 15-65%, about 30% of these intermolecular hydrogen bonding between the polymer and water were replaced by intrachain and interchain hydrogen bonding, consequently, PNIPA shrinked as aggregates. If χ_v was above 65%, the interchain hydrogen bonding became predominant due to the solubility characteristics of amphiphilic methanol, and the PNIPA system was homogeneous solution again. We believe that the reentrant transition is related to the weaker interaction between PNIPA molecules and methanol-water complexes, (H₂O)_m(CH₃OH)_n (m/n = 5/1, 5/2, 5/3, 5/4, 5/5) as compared to that between PNIPA and free water or free methanol.     

Complexation between poly(N,N-diethylacrylamide) and poly(acrylic acid) in aqueous solution

The complexation between poly(N,N-diethylacrylamide) (PDEA) and poly(acrylic acid) (PAA) in aqueous solution was studied by viscometric, potentiometric, and fluorescence techniques. It was found that an interpolymer complex formed between the two polymers through hydrogen bonding interactions with the stoichiometry of r=0.6 (r is unit molar ratio of PAA/PDEA), and the complex formation show the dependence on pH values. The phase behaviour studies showed that the lower critical solution temperature of the PDEA-PAA aqueous solution gradually increased with the increasing of r from 0.01 to 0.15, until a soluble system in the whole temperature region was obtained, which remained in the range of r=0.15-0.3. At higher PAA concentrations, when r is above 0.3, the system appeared phase separation, and almost no temperature dependence was observed. Based on these conclusion and structure characteristics of PDEA and PAA, a model containing only short sequences of monomer residues was proposed for the structure of PDEA-PAA complex.     

Complexes of polyacids with poly(vinylbenzocrown ether)s and polyvinylbenzoglymes in water

Insoluble complexes are formed in acidic aqueous media when poly(acrylic acid) (PAA) and poly-(vinylbenzo-18-crown-6) (P18C6) or polyvinylbenzoglymes are mixed. Complex formation results from hydrogen bonding between carboxyl groups and crown ether- or glyme–oxygen atoms as well as from hydrophobic interactions. The precipitation is pH dependent and was determined as a function of the ratio PAA to P18C6 or to polyglyme at different HCl concentrations in 10^?4M solutions of polycrown or polyglyme. Precipitation is nearly quantitative in 0.01N HCl. The compositions of PAA/P18C6 precipitates were determined as a function of the initial PAA/P18C6 ratio in solution. The complexes with P18C6 can be solubilized in acidic media when crown-complexable cations (K⁺, Cs⁺, Ba²⁺) are added, but the charged P18C6 reprecipitates in basic solution as a polysalt complex with the PAA–polyanion. More stable PAA–P18C6 complexes in the form of fibers can be obtained by interfacial complex formation. Poly(methacrylic acid) is less effective as a complex former.     

Thermal behaviour of poly(allyl azide)

The paper describes the synthesis of low molecular mass poly(allyl chloride) (PAC) (M _n= 856-3834 g mol^-1) using Lewis acid (ALCL₃, FeCL₃, TiCL₄) and al powder. Branching in PAC was indicated on the basis of elemental analysis and ¹H-NMR spectroscopy. azidation of pac could be carried out at 100°C by using NaN₃ and DMSO as solvent. Curing of poly(allyl azide) (PAA) by cyclic dipolar addition reaction with EGDMA (ethylene glycol dimethacrylate, 5-45 phr) was investigated by differential scanning calorimetry and structure of cured polymer was confirmed by FTIR. A two-step mass loss was exhibited by uncured and cured PAA in nitrogen atmosphere. A mass loss of 20-28% (155-274°C) and 50-61% (330-550°C) was observed. This revised version was published online in July 2006 with corrections to the Cover Date.