Variational analysis of gradient elastic flexural plates under static loading

Gradient elastic flexural Kirchhoff plates under static loading are considered. Their governing equation of equilibrium in terms of their lateral deflection is a sixth order partial differential equation instead of the fourth order one for the classical case. A variational formulation of the problem is established with the aid of the principle of virtual work and used to determine all possible boundary conditions, classical and non-classical ones. Two circular gradient elastic plates, clamped or simply supported at their boundaries, are analyzed analytically and the gradient effect on their static response is assessed in detail. A rectangular gradient elastic plate, simply supported at its boundaries, is also analyzed analytically and its rationally obtained boundary conditions are compared with the heuristically obtained ones in a previous publication of the authors. Finally, a plate with two opposite sides clamped experiencing cylindrical bending is also analyzed and its response compared against that for the cases of micropolar and couple-stress elasticity theories.     

A microstructure-dependent Timoshenko beam model based on a modified couple stress theory

A microstructure-dependent Timoshenko beam model is developed using a variational formulation. It is based on a modified couple stress theory and Hamilton's principle. The new model contains a material length scale parameter and can capture the size effect, unlike the classical Timoshenko beam theory. Moreover, both bending and axial deformations are considered, and the Poisson effect is incorporated in the current model, which differ from existing Timoshenko beam models. The newly developed non-classical beam model recovers the classical Timoshenko beam model when the material length scale parameter and Poisson's ratio are both set to be zero. In addition, the current Timoshenko beam model reduces to a microstructure-dependent Bernoulli-Euler beam model when the normality assumption is reinstated, which also incorporates the Poisson effect and can be further reduced to the classical Bernoulli-Euler beam model. To illustrate the new Timoshenko beam model, the static bending and free vibration problems of a simply supported beam are solved by directly applying the formulas derived. The numerical results for the static bending problem reveal that both the deflection and rotation of the simply supported beam predicted by the new model are smaller than those predicted by the classical Timoshenko beam model. Also, the differences in both the deflection and rotation predicted by the two models are very large when the beam thickness is small, but they are diminishing with the increase of the beam thickness. Similar trends are observed for the free vibration problem, where it is shown that the natural frequency predicted by the new model is higher than that by the classical model, with the difference between them being significantly large only for very thin beams. These predicted trends of the size effect in beam bending at the micron scale agree with those observed experimentally. Finally, the Poisson effect on the beam deflection, rotation and natural frequency is found to be significant, which is especially true when the classical Timoshenko beam model is used. This indicates that the assumption of Poisson's effect being negligible, which is commonly used in existing beam theories, is inadequate and should be individually verified or simply abandoned in order to obtain more accurate and reliable results.     

Static, stability and dynamic analysis of gradient elastic flexural Kirchhoff plates

The governing equation of motion of gradient elastic flexural Kirchhoff plates, including the effect of in-plane constant forces on bending, is explicitly derived. This is accomplished by appropriately combining the equations of flexural motion in terms of moments, shear and in-plane forces, the moment–stress relations and the stress–strain equations of a simple strain gradient elastic theory with just one constant (the internal length squared), in addition to the two classical elastic moduli. The resulting partial differential equation in terms of the lateral deflection of the plate is of the sixth order instead of the fourth, which is the case for the classical elastic case. Three boundary value problems dealing with static, stability and dynamic analysis of a rectangular simply supported all-around gradient elastic flexural plate are solved analytically. Non-classical boundary conditions, in additional to the classical ones, have to be utilized. An assessment of the effect of the gradient coefficient on the static or dynamic response of the plate, its buckling load and natural frequencies is also made by comparing the gradient type of solutions against the classical ones.     

Nonlinear bending behavior of orthotropic Mindlin plate resting on orthotropic Pasternak foundation using GDQM

Rectangular plates resting on elastic foundations are operational activities of large transportation aircraft on runways, footings, foundation of spillway dam, civil building in cold regions, and bridge structures. Hence, in the present work, nonlinear bending analysis of embedded rectangular plates is investigated based on orthotropic Mindlin plate theory. The elastic medium is simulated by orthotropic Pasternak foundation. Adopting the nonlinear strain–displacement relation, the governing equations are derived based on energy method and Hamilton’s principle. The generalized differential quadrature method is performed for the case when all four ends are clamped supported. The influences of the plate thickness, shear-locking, elastic medium constants, and applied force on the nonlinear bending of the rectangular plate are studied. Results indicate that increasing the plate thickness decreases the deflection of the plate. It is also observed that increasing the applied force increases the deflection of the plate. Furthermore, considering elastic medium decreases deflection of the plate, and the effect of the Pasternak-type is higher than the Winkler-type on the maximum deflection of the plate. Also, it is found that the present results have good agreement with previous researches.     

用能量法研究双模量大挠度圆板的轴对称弯曲

双模量圆板在外载荷作用下发生轴对称弯曲变形时,会形成各向同性的拉伸区和压缩区.此种情况下,可把双模量圆板看成两种各向同性材料组成的层合板,采用弹性理论建立了双模量圆板在外载荷作用下的静力平衡方程,利用静力平衡方程确定了双模量圆板的中性面位置.在此基础上,采用能量法研究了双模量大挠度圆板轴对称弯曲变形问题,将该方法计算结...     

梯度弹性基础上正交异性薄板的弯曲

基于能量法和变分原理,采用双参数弹性基础模型,研究了梯度弹性基础上正交异性薄板在分布载荷作用下的弯曲问题。首先,根据能量法与变分原理,给出了梯度弹性基础上正交异性薄板的弯曲微分平衡方程,并得到了梯度弹性基础刚度系数 与 的计算表达式;进而,假设 向正应力在厚度方向上均匀分布,推导了弹性基础 向位移衰减函数 的计算式。在算例中,通过将梯度弹性基础退化为均质基础,并与Vlazov模型对比,证明了本文理论的正确性;最后,求解了弹性模量呈幂律分布的梯度基础上薄板的挠度分布,分析了基础上下表层材料弹性模量比 与体积分数指数 对薄板挠度分布的影响。     

应用混合变量余能原理求解不同载荷作用下四边简支矩形板的弯曲

由功的互等定理导出了弯曲矩形板混合变量的总余能,应用混合变量余能原理求解四边简支矩形板弯曲问题,给出了四边简支矩形板的混合变量余能表达式,求解了不同载荷作用下四边简支矩形板的弯曲问题,并将计算的不同载荷作用下的挠度和弯矩值与ANSYS有限元的计算值比较,给出了一种求解四边简支矩形板的新方法。     

Bending of orthotropic plates resting on Pasternak’s foundations using mixed shear deformation theory

The mixed first-order shear deformation plate theory(MFPT) is employed to study the bending response of simply-supported orthotropic plates.The present plate is subjected to a mechanical load and resting on Pasternak’s model or Winkler’s model of elastic foundation or without any elastic foundation.Several examples are presented to verify the accuracy of the present theory.Numerical results for deflection and stresses are presented.The proposed MFPT is shown simplely to implement and capable of giving satisfactory results for shear deformable plates under static loads and resting on two-parameter elastic foundation.The results presented here show that the characteristics of deflection and stresses are significantly influenced by the elastic foundation stiffness,plate aspect ratio and side-to-thickness ratio.     

Symplectic system based analytical solution for bending of rectangular orthotropic plates on Winkler elastic foundation

This paper analyses the bending of rectangular orthotropic plates on a Winkler elastic foundation.Appropriate definition of symplectic inner product and symplectic space formed by generalized displacements establish dual variables and dual equations in the symplectic space.The operator matrix of the equation set is proven to be a Hamilton operator matrix.Separation of variables and eigenfunction expansion creates a basis for analyzing the bending of rectangular orthotropic plates on Winkler elastic foundation and obtaining solutions for plates having any boundary condition.There is discussion of symplectic eigenvalue problems of orthotropic plates under two typical boundary conditions,with opposite sides simply supported and opposite sides clamped.Transcendental equations of eigenvalues and symplectic eigenvectors in analytical form given.Analytical solutions using two examples are presented to show the use of the new methods described in this paper.To verify the accuracy and convergence,a fully simply supported plate that is fully and simply supported under uniformly distributed load is used to compare the classical Navier method,the Levy method and the new method.Results show that the new technique has good accuracy and better convergence speed than other methods,especially in relation to internal forces.A fully clamped rectangular plate on Winkler foundation is solved to validate application of the new methods,with solutions compared to those produced by the Galerkin method.     

基于遗传算法的弹性地基加肋板肋梁无网格优化分析

基于遗传算法及一阶剪切理论, 提出一种弹性地基上加肋板肋条位置优化的无网格方法. 首先, 通过一系列点来离散平板及肋条, 并用弹簧模拟弹性地基, 从而得到加肋板的无网格模型; 其次, 基于一阶剪切理论及移动最小二乘近似原理导出位移场, 求出弹性地基加肋板总势能; 再次, 根据哈密顿原理导出结构的弯曲控制方程, 并通过完全转换法处理边界条件; 最后, 引入遗传算法和改进遗传算法, 以肋条的位置为设计变量、弹性地基板的中心点挠度最小值为目标函数, 对肋条位置进行优化达到地基板控制点挠度最小的目的. 以不同参数、载荷布置形式的弹性地基加肋板为例, 与ABAQUS有限元结果及文献解进行比较. 研究表明, 采用所提出的无网格模型可有效求解弹性地基上加肋板弯曲问题, 结果易收敛, 同时基于遗传算法与改进混合遗传算法所提出的无网格优化方法均可有效优化弹性地基加肋板肋条位置, 后者计算效率相对较高, 只进行了三次迭代便可获得稳定的最优解, 此外在优化过程中肋条位置改变时只需要重新计算位移转换矩阵, 又避免了网格重构.      

板弯曲求解新体系及其应用

建立平面弹性与板弯曲的相似性理论,给出了板弯曲经典理论的另一套基本方程与求解方法,然后进入哈密顿体系用直接法研究板弯曲问题．新方法论应用分离变量、本征函数展开方法给出了条形板问题的分析解,突破了传统半逆解法的限制．结果表明新方法论有广阔的应用前景．     

Stability and dynamic analysis of partially cracked thin orthotropic microplates under thermal environment: an analytical approach

Abstract

An analytical model is proposed to analyze the vibration and buckling problem of partially cracked thin orthotropic microplate in the presence of thermal environment. The differential governing equation for the cracked plate is derived using the classical plate theory in conjunction with the strain gradient theory of elasticity. The crack is modeled using appropriate crack compliance coefficients based on the simplified line spring model. The influence of thermal environment is incorporated in governing equation in form thermal moments and in-plane compressive forces. The governing equation for cracked plate has been solved analytically to get fundamental frequency and central deflection of plate. To demonstrate the accuracy of the present model, few comparison studies are carried out with the published literature. The stability and dynamic characteristics of the cracked plate are studied considering various parameters such as crack length, plate thickness, change in temperature, and internal length scale of microstructure. It has been concluded that the frequency and deflection are affected by crack length, temperature, and internal length scale of microstructure. Furthermore, to study the buckling behavior of cracked plate, the classical relations for critical buckling load and critical buckling temperature is also proposed considering the effect of crack length, temperature, and internal length scale of microstructure.     

考虑尺度效应的微梁静态弯曲数值分析

基于修正偶应力理论及表面弹性理论,本文提出了一种新的双曲线剪切变形梁模型,用于均匀微尺度梁的静态弯曲分析。该理论可以直接利用本构关系获得横向剪切应力,满足梁顶部和底部的无应力边界条件,避免了引入剪切修正因子。根据广义Young-Laplace方程建立了梁的内部与表面层的应力连续性条件,单一的变量场可以描述梁的位移模式。通过在位移场中考虑表面层厚度以及表面层的应力连续条件,可以使新模型能够更准确地预测微尺寸和表面能相关的尺度效应。通过Hamilton原理推导出了梁的控制方程和边界条件。应变能除了考虑经典弹性理论,还要考虑微结构效应和表面能。Navier-type的解析解适用于简支边界条件,而基于拉格朗日插值的微分求积法(DQEM)可以研究在不同边界条件下的力学响应。把该数值解与Navier方法得出的解析解作了对比,得出:微尺度梁在考虑表面能或微尺寸效应、不同载荷和梁高变化下的响应一致;当不考虑微结构相关性和表面能效应时,该模型退化为经典的欧拉梁模型。     

On the cyclic bending behaviour of a hard coating on a ductile substrate with periodic surface hardened regions

A cyclic bending experiment is designed to investigate the interface fracture behaviour of a hard chromium coating on a ductile substrate with periodic surface hardened regions. The unique deflection pattern of the vertical cracks after they run through the coating and impinge at the interface is revealed experimentally. A simple double-layer elastic beam model is adopted to investigate the interfacial shear stresses analytically. A FE model is employed to compute the stresses of the tri-phase structure under a single round of bending, and to investigate the effect of the loading conditions on the deflection pattern of the vertical cracks at the interface.     

横观各向同性弹性半空间地基上四边自由各向异性矩形薄板弯曲解析解

选用更具广泛性的横观各向同性弹性半空间地基模型,来分析四边自由各向异性矩形地基板的弯曲解析解．将异性薄板的弯曲控制方程,与基于横观各向同性弹性半空间地基位移解建立的板与地基变形协调方程相结合,先按对称性分解,然后用三角级数法,得出横观各向同性弹性半空间地基上四边自由各向异性矩形薄板的弯曲解析解,包括地基反力、板的挠度及内力的解析表达式．该解析解克服了数值法的弊端,取消了对地基反力的假设,板的内力及地基反力求解更切实际．算例结果与文献结果吻合良好,证明本文方法的可行性．     

梯度弹性基础上正交异性薄板的屈曲分析

基于双参数弹性基础模型,研究了梯度弹性基础上正交异性薄板的屈曲问题. 首先,基于能量法与变分原理,给出了梯度弹性基础上正交异性薄板的屈曲控制方程,并得到了梯度弹性基础刚度系数K₁ 与K₂的计算式;进而,通过将位移函数采用三角函数展开的方法,给出了单向压缩载荷作用下、四边简支正交异性弹性基础板屈曲载荷的计算式;在算例中,通过将该文的解退化到单纯的正交异性板,并与经典弹性解比较,证明了理论的正确性;最后,求解了弹性模量在厚度方向上呈幂律分布的梯度基础上的薄板屈曲问题,分析了基础上下表层材料弹性模量比与体积分数指数对屈曲载荷的影响.     

功能梯度中厚圆/环板轴对称弯曲问题的解析解

基于一阶剪切变形板理论，导出了热/机载荷作用下，位移形式的功能梯度 中厚圆/环板轴对称弯曲问题的控制方程，获得了问题的位移和内力的一般解析解. 作为特 例，分别研究了边缘径向固定和可动的夹紧和简支的4种实心功能梯度圆板，给出了它们的 解，并分析了热/机载荷作用下解的形态，讨论了横向剪切变形、材料梯度常数和边界条件， 对板的轴对称弯曲行为的影响.     

A micro scale Timoshenko beam model based on strain gradient elasticity theory

A micro scale Timoshenko beam model is developed based on strain gradient elasticity theory. Governing equations, initial conditions and boundary conditions are derived simultaneously by using Hamilton's principle. The new model incorporated with Poisson effect contains three material length scale parameters and can consequently capture the size effect. This model can degenerate into the modified couple stress Timoshenko beam model or even the classical Timoshenko beam model if two or all material length scale parameters are taken to be zero respectively. In addition, the newly developed model recovers the micro scale Bernoulli–Euler beam model when shear deformation is ignored. To illustrate the new model, the static bending and free vibration problems of a simply supported micro scale Timoshenko beam are solved respectively. Numerical results reveal that the differences in the deflection, rotation and natural frequency predicted by the present model and the other two reduced Timoshenko models are large as the beam thickness is comparable to the material length scale parameter. These differences, however, are decreasing or even diminishing with the increase of the beam thickness. In addition, Poisson effect on the beam deflection, rotation and natural frequency possesses an interesting “extreme point” phenomenon, which is quite different from that predicted by the classical Timoshenko beam model.     

Non-linear analysis of functionally graded plates under transverse and in-plane loads

Large deflection and postbuckling responses of functionally graded rectangular plates under transverse and in-plane loads are investigated by using a semi-analytical approach. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The plate is assumed to be clamped on two opposite edges and the remaining two edges may be simply supported or clamped or may have elastic rotational edge constraints. The formulations are based on the classical plate theory, accounting for the plate-foundation interaction effects by a two-parameter model (Pasternak-type), from which Winkler elastic foundation can be treated as a limiting case. A perturbation technique in conjunction with one-dimensional differential quadrature approximation and Galerkin procedure are employed in the present analysis. The numerical illustrations concern the large deflection and postbuckling behavior of functional graded plates with two pairs of constituent materials. Effects played by volume fraction, the character of boundary conditions, plate aspect ratio, foundation stiffness, initial compressive stress as well as initial transverse pressure are studied.     

Size and temperature effects on band gaps in periodic fluid-filled micropipes

A new model is proposed for determining the band gaps of flexural wave propagation in periodic fluid-filled micropipes with circular and square thin-wall cross-sectional shapes, which incorporates temperature, microstructure, and surface energy effects. The band gaps depend on the thin-wall cross-sectional shape, the microstructure and surface elastic material constants, the pipe wall thickness, the unit cell length, the volume fraction, the fluid velocity in the pipe, the temperature change,and the thermal expansion coefficient. A systematic parametric study is conducted to quantitatively illustrate these factors. The numerical results show that the band gap frequencies of the current non-classical model with both circular and square thin-wall cross-sectional shapes are always higher than those of the classical model. In addition,the band gap size and frequency decrease with the increase of the unit cell length according to all the cases. Moreover, the large band gaps can be obtained by tailoring these factors.