Structure, conformation, stereodynamics, dimer formation, and absolute configuration of axially chiral atropisomers of hindered biphenyl carbinols

NMR spectra of biphenyl derivatives bearing a single CR2OH substituent in the ortho position indicate that they exist as sp (more stable) and ap (less stable) conformers, due to the restricted rotation about the Ar-CR2OH bond. When R = Et (compound 2) the corresponding rotation barrier was determined (7.5 kcal mol-1) by line shape simulation of the low-temperature NMR spectra. Introduction of the prochiral i-Pr group in the position 3' of a biphenyl with the CMe2OH substituent in the position 2 (4) allowed the determination of the enantiomerization barrier (due to the Ar-Ar bond rotation) for the stereolabile axially chiral atropisomers (13.95 kcal mol(-1)). DFT computations of these barriers were all in agreement with the experiments. Biphenyls bearing two CR2OH groups in the 2,2' positions were found to exist as configurationally stable atropisomers: when R = Me (7) they were separated by enantioselective HPLC and the absolute configuration assigned on the basis of the corresponding CD spectra. In solution, compounds 6 (R = H) and 7 (R = Me) were found to originate a dimer, due to H-bond interactions between two enantiomers. In the case of 7, the free energy of activation (9.5 kcal mol-1) for the exchange of the monomer with the dimer could be measured, for the first time, by dynamic NMR. The conformational preferences, predicted by computations for the biphenyls with two CR2OH substituents in the 2,2' positions, were confirmed by X-ray diffraction in the case of R = H (6), R = Me (7), and R = i-Pr (9).     

Off-center oxygen-arene interactions in solution: a quantitative study

[reaction: see text] Triptycenes with C1-MeO/RCOO (R = H, Me, Et, i-Pr, CF3) and C9-XC6H4CH2 (X = Me, H, F, CN, CF3) have been prepared to determine lone pair-arene interactions in the off-center configuration. The ratios of the syn and anti conformers were determined by low-temperature NMR spectroscopy. The syn conformer allows the attached arene and the MeO/ester to interact with each other while the anti conformer does not. The free energies of interaction have been derived from the syn/anti ratios. Compound 7 in the ester series with X = H and R = CF3 is the only compound that shows a slightly repulsive interaction (0.08 kcal/mol). Compound 2e in the MeO series with X = CF3 exhibits an attractive interaction (-0.47 +/- 0.05 kcal mol). All other compounds show smaller attractive interactions.     

Dynamical intramolecular metal-to-metal ligand exchange of phosphine and thioether ligands in derivatives PtRu5(CO)16(mu6-C)

The complexes PtRu(5)(CO)(15)(PMe(2)Ph)(mu(6)-C) (2), PtRu(5)(CO)(14)(PMe(2)Ph)(2)(mu(6)-C) (3), PtRu(5)(CO)(15)(PMe(3))(mu(6)-C) (4), PtRu(5)(CO)(14)(PMe(3))(2)(mu(6)-C) (5), and PtRu(5)(CO)(15)(Me(2)S)(mu(6)-C) (6) were obtained from the reactions of PtRu(5)(CO)(16)(mu(6)-C) (1) with the appropriate ligand. As determined by NMR spectroscopy, all the new complexes exist in solution as a mixture of isomers. Compounds 2, 3, and 6 were characterized crystallographically. In all three compounds, the six metal atoms are arranged in an octahedral geometry, with a carbido carbon atom in the center. The PMe(2)Ph and Me(2)S ligands are coordinated to the Pt atom in 2 and 6, respectively. In 3, the two PMe(2)Ph ligands are coordinated to Ru atoms. In solution, all the new compounds undergo dynamical intramolecular isomerization by shifting the PMe(2)Ph or Me(2)S ligand back and forth between the Pt and Ru atoms. For compound 2, DeltaH++ = 15.1(3) kcal/mol, DeltaS++ = -7.7(9) cal/(mol.K), and DeltaG(298) = 17.4(6) kcal/mol for the transformation of the major isomer to the minor isomer; for compound 4, DeltaH++ = 14.0(1) kcal/mol, DeltaS++ = -10.7(4) cal/(mol.K), and DeltaG(298) = 17.2(2) kcal/mol for the transformation of the major isomer to the minor isomer; for compound 6, DeltaH++ = 18(1) kcal/mol, DeltaS++ = 21(5) cal/(mol.K) and DeltaG(298) = 12(2) kcal/mol. The shifts of the Me(2)S ligand in 6 are significantly more facile than the shifts for the phosphine ligand in compounds 2-5. This is attributed to a more stable ligand-bridged intermediate for the isomerizations of 6 than that for compounds 2-5. The intermediate for the isomerization of 6 involves a bridging Me(2)S ligand that can use two lone pairs of electrons for coordination to the metal atoms, whereas a tertiary phosphine ligand can use only one lone pair of electrons for bridging coordination.     

Reactions of vinyl acetate and vinyl trifluoroacetate with cationic diimine Pd(II) and Ni(II) alkyl complexes: identification of problems connected with copolymerizations of these monomers with ethylene

Vinyl acetate (VA) and vinyl trifluoroacetate (VA(f)) react with [(NwedgeN)Pd(Me)(L)][X] (M = Pd, Ni, (NwedgeN) = N,N'-1,2-acenaphthylenediylidene bis(2,6-dimethyl aniline), Ar(f) = 3,5-trifluoromethyl phenyl, L = Ar(f)CN, Et2O; X = B(Ar(f))4-, SbF6-) to form pi-adducts 3 and 5 at -40 degrees C. Binding affinities relative to ethylene have been determined. Migratory insertion occurs in a 2,1 fashion (DeltaG++ = 19.4 kcal/mol, 0 degrees C for VA, and 17.4 kcal/mol, -40 degrees C for VA(f)) to yield five-membered chelate complexes [(NwedgeN)Pd(kappa2-CH(Et)(OC(O)-CH3))]+, 4, and [(NwedgeN)Pd(kappa2-CH(Et)(OC(O)CF3))]+, 6. When VA is added to [(NwedgeN)Ni(CH3)]+, an equilibrium mixture of an eta2 olefin complex, 8c, and a kappa-oxygen complex, 8o, results. Insertion occurs from the eta2 olefin complex, 8c (DeltaG++ = 15.5 kcal/mol, -51 degrees C), in both a 2,1 and a 1,2 fashion to generate a mixture of five- and six-membered chelates, 9(2,1) and 9(1,2). VA(f) inserts into the Ni-CH3 bond (-80 degrees C) to form a five-membered chelate with no detectable intermediate. Thermolysis of the Pd chelates results in beta-acetate elimination from 4 (DeltaG++ = 25.5 kcal/mol, 60 degrees C) and beta-trifluoroacetate elimination from 6 (DeltaG = 20.5 kcal/mol, 10 degrees C). The five-membered Ni chelate, 9(2,1), is quite stable at room temperature, but the six-membered chelate, 9(1,2), undergoes beta-elimination at -34 degrees C. Treatment of the OAc(f) containing Pd chelate 6 with ethylene results in complete opening to the pi-complex [(NwedgeN)Pd(kappa2-CH(Et)(OAc(f)))(CH2CH2)]+ (OAc(f) = OC(O)CF3), 18, while reaction of the OAc containing Pd chelate 4 with ethylene establishes an equilibrium between 4 and the open form 16, strongly favoring the closed chelate 4 (DeltaH = -4.1 kcal/mol, DeltaS = -23 eu, K = 0.009 M(-1) at 25 degrees C). The open chelates undergo migratory insertion at much slower rates relative to those of the simple (NwedgeN)Pd(CH3)(CH2CH2)+ analogue. These quantitative studies provide an explanation for the behavior of VA and VA(f) in attempted copolymerizations with ethylene.     

Symmetry and geometry considerations of atom transfer: deoxygenation of (silox)3WNO and R3PO (R = Me, Ph, (t)Bu) by (silox)3M (M = V, NbL (L = PMe3, 4-picoline), Ta; silox = (t)Bu3SiO)

Deoxygenations of (silox)(3)WNO (12) and R(3)PO (R = Me, Ph, (t)Bu) by M(silox)(3) (1-M; M = V, NbL (L = PMe(3), 4-picoline), Ta; silox = (t)Bu(3)SiO) reflect the consequences of electronic effects enforced by a limiting steric environment. 1-Ta rapidly deoxygenated R(3)PO (23 degrees C; R = Me (DeltaG degrees (rxn)(calcd) = -47 kcal/mol), Ph) but not (t)Bu(3)PO (85 degrees, >2 days), and cyclometalation competed with deoxygenation of 12 to (silox)(3)WN (11) and (silox)(3)TaO (3-Ta; DeltaG degrees (rxn)(calcd) = -100 kcal/mol). 1-V deoxygenated 12 slowly and formed stable adducts (silox)(3)V-OPR(3) (3-OPR(3)) with OPR(3). 1-Nb(4-picoline) (S = 0) and 1-NbPMe(3) (S = 1) deoxygenated R(3)PO (23 degrees C; R = Me (DeltaG degrees (rxn)(calcd from 1-Nb) = -47 kcal/mol), Ph) rapidly and 12 slowly (DeltaG degrees (rxn)(calcd) = -100 kcal/mol), and failed to deoxygenate (t)Bu(3)PO. Access to a triplet state is critical for substrate (EO) binding, and the S --> T barrier of approximately 17 kcal/mol (calcd) hinders deoxygenations by 1-Ta, while 1-V (S = 1) and 1-Nb (S --> T barrier approximately 2 kcal/mol) are competent. Once binding occurs, significant mixing with an (1)A(1) excited state derived from population of a sigma-orbital is needed to ensure a low-energy intersystem crossing of the (3)A(2) (reactant) and (1)A(1) (product) states. Correlation of a reactant sigma-orbital with a product sigma-orbital is required, and the greater the degree of bending in the (silox)(3)M-O-E angle, the more mixing energetically lowers the intersystem crossing point. The inability of substrates EO = 12 and (t)Bu(3)PO to attain a bent 90 degree angle M-O-E due to sterics explains their slow or negligible deoxygenations. Syntheses of relevant compounds and ramifications of the results are discussed. X-ray structural details are provided for 3-OPMe(3) (90 degree angle V-O-P = 157.61(9) degrees), 3-OP(t)Bu(3) ( 90 degree angle V-O-P = 180 degrees ), 1-NbPMe(3), and (silox)(3)ClWO (9).     

Alkylating agents stronger than alkyl triflates

A new class of potent electrophilic "R(+)" alkylating agents has been developed using weakly nucleophilic carborane anions as leaving groups. These reagents, R(CHB(11)Me(5)X(6)) (R = Me, Et, and i-Pr; X = Cl, Br), are prepared via metathesis reactions with conventional alkylating agents such as alkyl triflates, using the high oxophilicity of silylium ion-like species, Et(3)Si(carborane), as the driving force to obtain increased alkyl electrophilicity. The crystal structure of the isopropyl reagent, i-Pr(CHB(11)Me(5)Br(6)), has been determined, revealing covalence in the alkyl-carborane bonding. This contrasts with the free i-Pr(+) carbocation observed when the anion is less coordinating (e.g. Sb(2)F(11)(-)) or with tertiary alkyl centers, as in [tert-butyl][carborane] salts. In solution, the reagents exist as equilibrating isomers with the alkyl group at the 7-11 or 12 halide positions of the CB(11) icosahedral carborane anion. These alkylating agents are so electrophilic that they (a) react with alkanes at or below room temperature via hydride extraction to produce carbenium ions, (b) alkylate benzene without a Friedel-Crafts catalyst to give arenium ions, and (c) alkylate electron-deficient phosphorus compounds that are otherwise inert to conventional alkylating agents such as methyl triflate.     

The first example of a nitrile hydratase model complex that reversibly binds nitriles

Nitrile hydratase (NHase) is an iron-containing metalloenzyme that converts nitriles to amides. The mechanism by which this biochemical reaction occurs is unknown. One mechanism that has been proposed involves nucleophilic attack of an Fe-bound nitrile by water (or hydroxide). Reported herein is a five-coordinate model compound ([Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+)) containing Fe(III) in an environment resembling that of NHase, which reversibly binds a variety of nitriles, alcohols, amines, and thiocyanate. XAS shows that five-coordinate [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) reacts with both methanol and acetonitrile to afford a six-coordinate solvent-bound complex. Competitive binding studies demonstrate that MeCN preferentially binds over ROH, suggesting that nitriles would be capable of displacing the H(2)O coordinated to the iron site of NHase. Thermodynamic parameters were determined for acetonitrile (DeltaH = -6.2(+/-0.2) kcal/mol, DeltaS = -29.4(+/-0.8) eu), benzonitrile (-4.2(+/-0.6) kcal/mol, DeltaS = -18(+/-3) eu), and pyridine (DeltaH = -8(+/-1) kcal/mol, DeltaS = -41(+/-6) eu) binding to [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) using variable-temperature electronic absorption spectroscopy. Ligand exchange kinetics were examined for acetonitrile, iso-propylnitrile, benzonitrile, and 4-tert-butylpyridine using (13)C NMR line-broadening analysis, at a variety of temperatures. Activation parameters for ligand exchange were determined to be DeltaH(+ +) = 7.1(+/-0.8) kcal/mol, DeltaS(+ +) = -10(+/-1) eu (acetonitrile), DeltaH(+ +) = 5.4(+/-0.6) kcal/mol, DeltaS(+ +) = -17(+/-2) eu (iso-propionitrile), DeltaH(+ +) = 4.9(+/-0.8) kcal/mol, DeltaS(+ +) = -20(+/-3) eu (benzonitrile), and DeltaH(+ +) = 4.7(+/-1.4) kcal/mol DeltaS(+ +) = -18(+/-2) eu (4-tert-butylpyridine). The thermodynamic parameters for pyridine binding to a related complex, [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) (DeltaH = -5.9(+/-0.8) kcal/mol, DeltaS = -24(+/-3) eu), are also reported, as well as kinetic parameters for 4-tert-butylpyridine exchange (DeltaH(+ +) = 3.1(+/-0.8) kcal/mol, DeltaS(+ +) = -25(+/-3) eu). These data show for the first time that, when it is contained in a ligand environment similar to that of NHase, Fe(III) is capable of forming a stable complex with nitriles. Also, the rates of ligand exchange demonstrate that low-spin Fe(III) in this ligand environment is more labile than expected. Furthermore, comparison of [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) and [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) demonstrates how minor distortions induced by ligand constraints can dramatically alter the reactivity of a metal complex.     

Conformational Studies by Dynamic NMR. 57.(1) Stereodynamics of Syn-Anti Interconversion of Disubstituted Acyl Durenes

The orthogonal syn and anti isomers, originated by the restricted rotation about the Ar-C(O)Bu(t) single bonds in 1,4-bis(2,2-dimethylpropanoyl)durene (2e), have been separated by preparative thin layer chromatography. In solution they reach an equilibrium where the syn-anti ratio depends upon the polarity of the solvent. This allowed us to assign the anti structure, which has a null dipole moment, to the least retained isomer. The free energy of activation (DeltaG) for the interconversion was found to be 22.5 kcal mol(-)(1), a value high enough for identifying these species as configurational isomers. When less hindered derivatives, also having two RCO (R = Pr(i), Et, Me) substituents in the positions 1,4 of the durene moiety, were examined, the syn and anti forms could be detected only at low temperature by means of NMR spectroscopy. The corresponding interconversion barriers (DeltaG = 13.4, 11.7, 10.9 kcal mol(-)(1), respectively) are, in fact, much lower than for R = Bu(t), indicating that in these cases we are dealing with conformational rather than with configurational isomers.     

High-oxidation-state neutral and cationic tantalum(IV) alkyl complexes that are stable toward beta-hydrogen and beta-methyl eliminations

The synthesis and solid-state structural characterization of a family of homoleptic and mixed dialkyl d1Ta(IV) complexes of the formula, (eta5-C5Me5)TaR1R2[N(i-Pr)C(Me)N(i-Pr)], where R1 = R2 = i-Bu (3), n-Bu (4), and Et (7), and R1 = Me, R2 = i-Bu (10), neopentyl (Np) (11), are reported, along with those for the cationic d1Ta(IV) complex, {(eta5-C5Me5)TaNp[N(i-Pr)C(Me)N(i-Pr)]}[B(C6F5)4] (12). All of the new compounds displayed a remarkably high degree of solution stability toward beta-hydrogen and beta-methyl eliminations/abstractions. Thermolysis of 3 in toluene at 80 degrees C for 18 h provided the Ta(IV) trimethylenemethane (TMM) complex 13.     

Direct addition of alcohols to organonitriles activated by ligation to a platinum(IV) center

Treatment of trans-[PtCl(4)(RCN)(2)] (R = Me, Et) with R'OH (R' = Me, Et, n-Pr, i-Pr, n-Bu) at 45 degrees C in all cases allowed the isolation of the trans-[PtCl(4)[(E)-NH=C(R)OR'](2)] imino ester complexes, while the reaction between cis-[PtCl(4)(RCN)(2)] and the least sterically hindered alcohols (methanol and ethanol) results in the formation of cis-[PtCl(4)[(E)-NH=C(R)OR'](2)] (R/R' = Me/Me) or trans-[PtCl(4)[(E)-NH=C(Et)OR'](2)] (R' = Me, Et), the latter being formed via thermal isomerization (ROH, reflux, 3 h) of the initially formed corresponding cis isomers. The reaction between alcohols R'OH and cis-[PtCl(4)(RCN)(2)] (R = Me, R' = Et, n-Pr, i-Pr, n-Bu; R = Et; R' = n-Pr, i-Pr, n-Bu), exhibiting greater R/R' steric congestion, allowed the isolation of cis-[PtCl(4)[(E)-NH=C(R)OR'][(Z)-NH=C(R)OR']] as the major products. The alcoholysis reactions of poorly soluble [PtCl(4)(RCN)(2)] (R = CH(2)Ph, Ph) performed under heterogeneous conditions, directly in the appropriate alcohol and for a prolonged time and, for R = Ph, with heating led to trans-[PtCl(4)[(E)-NH=C(R)OR'](2)] (R = CH(2)Ph, R' = Me, Et, n-Pr, i-Pr; R = Ph, R' = Me) isolated in moderate yields. In all of the cases, in contrast to platinum(II) systems, addition of R'OH to the organonitrile platinum(IV) complexes occurs under mild conditions and does not require a base as a catalyst. The formed isomerically pure (imino ester)Pt(IV) complexes can be reduced selectively, by Ph(3)P=CHCO(2)Me, to the corresponding isomers of (imino ester)Pt(II) species, exhibiting antitumor activity, without change in configuration of the imino ester ligands. Furthemore, the imino esters NH=C(R)OR' can be liberated from both platinum(IV) and platinum(II) complexes [PtCl(n)[H=C(R)OR'](2)] (n = 2, 4) by reaction with 1,2-bis(diphenylphosphino)ethane and pyridine, respectively. All of the prepared compounds were characterized by elemental analyses (C, H, N), FAB mass spectrometry, IR, and (1)H, (13)C[(1)H], and (195)Pt (metal complexes) NMR spectroscopies; the E and Z configurations of the imino ester ligands in solution were determined by observation of the nuclear Overhauser effect. X-ray structure determinations were performed for trans-[PtCl(4)[(E)-NH=C(Me)OEt](2)] (2), trans-[PtCl(4)[(E)-NH=C(Et)OEt](2)] (10), trans-[PtCl(4)[(E)-NH=C(Et)OPr-i](2)] (11), trans-[PtCl(4)[(E)-NH=C(Et)OPr-n](2)] (12), and cis-[PtCl(4)[(E)-NH=C(Et)OMe](2)] (14). Ab initio calculations have shown that the EE isomers are the most stable ones for both platinum(II) and platinum(IV) complexes, whereas the most stable configurations for the ZZ isomers are less stable than the respective EZ isomers, indicating an increase of the stability on moving from the ZZ to the EE configurations which is more pronounced for the Pt(IV) complexes than for the Pt(II) species.     

Recyclization of indolo[2,3-c]pyrylium salts by reaction with secondary amines

1-R-3-methylindolo[2,3-c]pyrylium salts react with cyclic secondary amines (morpholine, piperidine, and N-methylpiperazine) to give, depending on the structure of the alkyl substituent R, either 1- (when R=Me) or 3-aminocarbazoles (when R=i-Pr), or mixtures of both (when R=Et). The position of the amino-substituent in 1-morpholino-3,9-dimethylcarbazole has been established by x-ray diffraction examination.Deceased.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 546–551, April, 1990.     

On the mechanism of (PCP)Ir-catalyzed acceptorless dehydrogenation of alkanes: a combined computational and experimental study

Pincer complexes of the type ((R)PCP)IrH(2), where ((R)PCP)Ir is [eta(3)-2,6-(R(2)PCH(2))(2)C(6)H(3)]Ir, are the most effective catalysts reported to date for the "acceptorless" dehydrogenation of alkanes to yield alkenes and free H(2). We calculate (DFT/B3LYP) that associative (A) reactions of ((Me)PCP)IrH(2) with model linear (propane, n-PrH) and cyclic (cyclohexane, CyH) alkanes may proceed via classical Ir(V) and nonclassical Ir(III)(eta(2)-H(2)) intermediates. A dissociative (D) pathway proceeds via initial loss of H(2), followed by C-H addition to ((Me)PCP)Ir. Although a slightly higher energy barrier (DeltaE(+ +)) is computed for the D pathway, the calculated free-energy barrier (DeltaG(+ +)) for the D pathway is significantly lower than that of the A pathway. Under standard thermodynamic conditions (STP), C-H addition via the D pathway has DeltaG(o)(+ +) = 36.3 kcal/mol for CyH (35.1 kcal/mol for n-PrH). However, acceptorless dehydrogenation of alkanes is thermodynamically impossible at STP. At conditions under which acceptorless dehydrogenation is thermodynamically possible (for example, T = 150 degrees C and P(H)2 = 1.0 x 10(-7) atm), DeltaG(+ +) for C-H addition to ((Me)PCP)Ir (plus a molecule of free H(2)) is very low (17.5 kcal/mol for CyH, 16.7 kcal/mol for n-PrH). Under these conditions, the rate-determining step for the D pathway is the loss of H(2) from ((Me)PCP)IrH(2) with DeltaG(D)(+ +) approximately DeltaH(D)(+ +) = 27.2 kcal/mol. For CyH, the calculated DeltaG(o)(+ +) for C-H addition to ((Me)PCP)IrH(2) on the A pathway is 35.2 kcal/mol (32.7 kcal/mol for n-PrH). At catalytic conditions, the calculated free energies of C-H addition are 31.3 and 33.7 kcal/mol for CyH and n-PrH addition, respectively. Elimination of H(2) from the resulting "seven-coordinate" Ir-species must proceed with an activation enthalpy at least as large as the enthalpy change of the elimination step itself (DeltaH approximately 11-13 kcal/mol), and with a small entropy of activation. The free energy of activation for H(2) elimination (DeltaG(A)(+ +)) is hence found to be greater than ca. 36 kcal/mol for both CyH and n-PrH under catalytic conditions. The overall free-energy barrier of the A pathway is calculated to be higher than that of the D pathway by ca. 9 kcal/mol. Reversible C-H(D) addition to ((R)PCP)IrH(2) is predicted to lead to H/D exchange, because the barriers for hydride scrambling are extremely low in the "seven-coordinate" polyhydrides. In agreement with calculation, H/D exchange is observed experimentally for several deuteriohydrocarbons with the following order of rates: C(6)D(6) > mesitylene-d(12) > n-decane-d(22) > cyclohexane-d(12). Because H/D exchange in cyclohexane-d(12) solution is not observed even after 1 week at 180 degrees C, we estimate that the experimental barrier to cyclohexane C-D addition is greater than 36.4 kcal/mol. This value is considerably greater than the experimental barrier for the full catalytic dehydrogenation cycle for cycloalkanes (ca. 31 kcal/mol). Thus, the experimental evidence, in agreement with calculation, strongly indicates that the A pathway is not kinetically viable as a segment of the "acceptorless" dehydrogenation cycle.     

Equilibria between alpha- and beta-agostic stabilized rotamers of secondary alkyl niobium complexes.

The isopropyl chloro complex Tp(Me2)NbCl(i-Pr)(PhC&tbd1;CMe) (2) [Tp(Me2) = hydrotris(3,5-dimethylpyrazolyl)borate] exhibits a beta-agostic structure in the crystal. The conformation of the alkyl group is such that the agostic methyl group lies in the Calpha-Nb-Cl plane and the nonagostic one, in a wedge formed by two pyrazole rings. As observed by solution NMR spectroscopy, restricted rotation about the Nb-C bond allows the observation of an equilibrium between this species, 2beta, and a minor alpha-agostic rotamer 2alpha. A putative third rotamer which would have the secondary hydrogen in the wedge is not observed. Similar behavior is observed for related Tp'NbCl(i-Pr)(R(2)C=CMe) [Tp' = Tp(Me2), R(2) = Me (3); Tp' = Tp(Me2,4Cl), R(2) = Ph (4)]. The two diastereomers of the sec-butyl complex Tp(Me2)NbCl(sec-Bu)(MeC=CMe) (5) have been separated. In the crystal, 5CR-AS has a beta-agostic methyl group with the ethyl group located in the wedge formed by two pyrazole rings. The same single beta-agostic species is observed in solution. The other diastereomer, 5AR-CS has a beta-agostic methylene group in the solid state, and the methyl group sits in the wedge. In solution, an equilibrium between this beta-agostic methylene complex 5AR-CSbeta and a minor alpha-agostic species 5AR-CSalpha, where the ethyl substituent of the sec-Bu group is located in the wedge between two pyrazole rings, is observed. NMR techniques have provided thermodynamic parameters for these equilibria (K = 2beta/2alpha = 4.0 +/- 0.1 at 193 K, DeltaG(o)(193) = -2.2 +/- 0.1, DeltaH(o) = -7.4 +/- 0.1 kJ mol(-)(1), and DeltaS(o) = -27 +/- 1 J K(-)(1) mol(-)(1)), as well as kinetic parameters for the rotation about the Nb-C bond (at 193 K, DeltaG(2)= 47.5 +/- 2.5, DeltaH= 58.8 +/- 2.5 kJ mol(-)(1), and DeltaS = 59.0 +/- 10 J K(-)(1) mol(-)(1)). Upon selective deuteration of the beta-methyl protons in Tp(Me2)NbCl[CH(CD(3))(2)](PhC=CMe) (2-d(6)), an expected isotope effect that displaces the equilibrium toward the alpha-agostic rotamer is observed (K = 2-d(6)beta/2-d(6)alpha = 3.1 +/- 0.1 at 193 K, DeltaG(o)(193) = -1.8 +/- 0.1, DeltaH(o) = -8.3 +/- 0.4 kJ mol(-)(1) and DeltaS(o)= -34 +/- 2 J K(-)(1) mol(-)(1)). The anomalous values for DeltaH(o) and DeltaS(o) are discussed. Hybrid quantum mechanics/molecular mechanics calculations (IMOMM (B3LYP:MM3)) on the realistic model Tp(Me2)NbCl(i-Pr)(HC=CMe) have reproduced the energy differences between the alpha- and beta-agostic species with remarkable accuracy. Similar calculations show that Tp(Me2)NbCl(CH(2)Me)(HC=CMe) is alpha-agostic only and that Tp(5)(-)(Me)NbCl(CH(2)Me)(HC=CMe), which has no methyl groups at the 3-positions of the pyrazole rings, is beta-agostic only. Analysis and discussion of the computational and experimental data indicate that the unique behavior observed for the secondary alkyl complexes stems from competition between electronic effects favoring a beta-agostic structure and steric effects directing a bulky substituent in the wedge between two pyrazole rings of Tp(Me2). All of the secondary alkyl complexes thermally rearrange to the corresponding linear alkyl complexes via a first-order reaction.     

Preparation and reactivity of [D3d]-octahedrane: the most stable (CH)12 hydrocarbon

The synthesis of the (CH)12 hydrocarbon [D(3d)]-octahedrane (heptacyclo[6.4.0.0(2,4).0(3,7).0(5,12).0(6,10).0(9,11)]dodecane) 1 and its selective functionalization retaining the hydrocarbon cage is described. The B3LYP/6-311+G* strain energy of 1 is 83.7 kcal mol(-1) (4.7 kcal mol(-1) per C-C bond) which is significantly higher than that of the structurally related (CH)16 [D(4d)]-decahedrane 2 (75.4 kcal mol(-1); 3.1 kcal mol(-1) per C-C bond) and (CH)20 [I(h)]-dodecahedrane 3 (51.5 kcal mol(-1); 1.7 kcal mol(-1) per C-C bond); the heats of formation for 1-3 computed according to homodesmotic equations are 52, 35, and 4 kcal mol(-1). Catalytic hydrogenation of 1 leads to consecutive opening of the two cyclopropane rings to give C2-bisseco-octahedrane (pentacyclo[6.4.0.0(2,6).0(3,11).0(4,9)]dodecane) 16 as the major product. Although 1 is highly strained, its carbon skeleton is kinetically quite stable: Upon heating, 1 does not decompose until above 180 degrees C. The B3LYP/6-31G* barriers for the S(R)2 attack of the tBuO. and Br3C. radicals on a carbon atom of one of the cyclopropane fragments (Delta(298) = 27-28 kcal mol(-1)) are higher than those for hydrogen atom abstraction. The latter barriers are virtually identical for the abstraction from the C1-H and C2-H positions with the tBuO. radical (DeltaG(298) = 17.4 and 17.9 kcal mol(-1), respectively), but significantly different for the reaction at these positions with the Br3C. radical (DeltaG(298) = 18.8 and 21.0 kcal mol(-1)). These computational results agree well with experiments, in which the chlorination of 1 with tert-butyl hypochlorite gave a mixture of 1- and 2-chlorooctahedranes (ratio 3:2). The bromination with carbon tetrabromide under phase-transfer catalytic (PTC) conditions (nBu4NBr/NaOH) selectively gave 1-bromooctahedrane in 43 % isolated yield. For comparison, the PTC bromination was also applied to 2,4-dehydroadamantane yielding 54 % 7-bromo-2,4-dehydroadamantane.     

Force field parameters for sulfates and sulfamates based on ab initio calculations: Extensions of AMBER and CHARMm fields

Ab initio self-consistent field (SCF) Hartree-Fock calculations of sulfates R? O? SO₃(?1) (R = Me, Et, i-Pr) and sulfamates R? NHSO₃(?1) (R = H, Me, Et, i-Pr) were performed at the 4-31G(*S*N) //3-21G(*S*N) basis set levels, where asterisks indicate d functions on sulfur and nitrogen atoms. These standard levels were determined by comparing calculation results with several basis sets up to MP2/6-31G*//6-31G*. Several conformations per compound were studied to obtain molecular geometries, rotational barriers, and potential derived point charges. In methyl sulfate, the rotational barrier around the C? O bond is 1.6 kcal/mol at the MP2 level and 1.4 kcal/mol at the standard level. Its ground state has one of three HCOS torsion angles trans and one of three COSO torsion angles trans. Rotation over 60° around the single O? S bond in the sulfate group costs 2.5 kcal/mol at the MP2 and 2.1 kcal/mol at the standard level. For ethyl sulfate, the calculated rotational barrier in going from the ground state, which has its CCOS torsion angle trans, to the syn-periplanar conformation (CCOS torsion angle cis) is 4.8 kcal/mol. However, a much lower barrier of 0.7 kcal/mol leads to a secondary gauchelike conformation about 0.4 kcal/mol above the ground state, with the CCOS torsion angle at 87.6°. Again, one of the COSO torsion angles is trans in the ground state, and the rotational barrier for a 60° rotation of the sulfate group amounts to 1.8 kcal/mol. For methyl sulfamate, the rotational barriers are 2.5 kcal/mol around the C? N bond and 3.3 kcal/mol around the N? S bond. This is noteworthy because sulfamate itself has a calculated rotational barrier around the N? S bond of only 1.7 kcal/mol. These and other data were used to parameterize the well-known empirical force fields AMBER and CHARMm. When the new fields were tested by means of vibrational frequency calculations at the 6-31G*//6-31G* level for methyl sulfate, sulfamate, and methyl sulfamate ground states, the frequencies compared favorably with the AMBER and CHARMm calculated frequencies. The transferability of the force parameters to β-D -glucose-6-sulfate and isopropyl sulfate appears to be better than to isopropyl sulfamate. © 1995 by John Wiley & Sons, Inc.     

The solution structures and dynamics and the solid-state structures of substituted cyclopentadienyltitanium(IV) trifluorides

Organotitanium fluorides (C5Me4R)TiF3 (R = H, Me, Et) sublimate with formation of crystalline dimers. From solution, we obtained crystals of dimers and tetramers. The tetramer [{(C5Me5)TiF3}4] irreversibly dissociates in the solid state to dimers (DeltaH = 8.33 kcal mol(-1)). The variable-temperature (1)H and (19)F NMR spectroscopy measurements of the toluene-d(8) solution of [{(C5Me5)TiF3}2] revealed at 202 K one monomeric, two dimeric (with C2h and Cs symmetry), two tetrameric (with D2 and C2v symmetry), and two trimeric (both C2 symmetry) molecules. With the increase in temperature and dilution of the solution, the composition of the solution shifts to the smaller molecules. The thermodynamic and activation parameters for the reversible dissociation of dimers to monomers in the solution are DeltaH = 9.2 kcal mol(-1), DeltaS = 24.2 cal mol(-1) K(-1), DeltaH(double dagger) = 12.2 kcal mol(-1), DeltaS(double dagger) = 9.7 cal mol(-1) K(-1). The dissociation path with a weakly double-bridged transition-state dimer was proposed. The thermodynamic parameters for the reversible dissociation of the C2v tetramer to the dimers in solution are DeltaH = 7.9 kcal mol(-1) and DeltaS = 26.8 cal mol(-1) K(-1). From both tetramers, the D2 molecule is 0.34(5) kcal mol(-1) lower in enthalpy and 6.5(5) cal mol(-1) K(-1) lower in entropy than the C2v molecule. The structures of both trimers were proposed. The low-temperature 19F NMR spectra of the CDCl3 solution of [{(C5Me5)TiF3}2] are consistent with equilibria of a monomer, two dimers (with C2h and Cs symmetry), and a trimer. The vapor pressure osmometric molecular mass determination of CDCl3 solution of [{(C5Me5)TiF3}2] at 302 K is consistent with the equilibrium of the dimer and the monomer.     

Ene-diamine versus imine-amine isomeric preferences

Cyanide-catalyzed aldimine coupling was employed to synthesize compounds with 1,2-ene-diamine and alpha-imine-amine structural motifs: 1,2,N,N'-tetraphenyletheylene-1,2-diamine (13) and (+/-)-2,3-di-(2-hydroxyphenyl)-1,2-dihydroquinoxaline (17), respectively. Single-crystal X-ray diffraction provided solid-state structures and density functional theory calculations were used to probe isomeric preferences within this and the related hydroxy-ketone/ene-diol system. The ene-diamine and imine-amine core structures were calculated (B3LYP/6-311++G(d,p)) to be essentially identical in energy (DeltaG = 0.2 kcal/mol in favor of the imine-amine, within the error of the calculation). However, additional effects-such as pi conjugation-in 13 render an ene-diamine structure that is slightly more stable than the imine-amine tautomer (14) (DeltaG = 0.2-0.7 kcal/mol, within the error of the calculation). In contrast, the intramolecular hydrogen bonding present in 17 significantly favors the imine-amine isomer over the ene-diamine tautomer (18) (DeltaG = 7.2-8.9 kcal/mol). For both 13 and 17, the optimized calculated structures (B3LYP/6-31+G(d')) are identical to those observed by single-crystal X-ray diffraction.     

Conformations of silicon-containing rings. 5. Conformational properties of 1-methyl-1-silacyclohexane: gas electron diffraction,low-temperature NMR,and quantum chemical calculations

The molecular structure of 1-methyl-1-silacyclohexane 3 has been determined by gas electron diffraction (GED). The conformational preference of the methyl group was studied experimentally in the gas phase (GED) and in solution (low-temperature (13)C NMR) and by quantum chemical calculations (HF, MP2, and B3LYP with 6-31G basis sets and mPW1PW91/6-311G(2df,p)). Both experimental methods result in a preference of the equatorial position of the methyl group, 68(7)% in the gas phase at 298 K and 74(1)% in solution at 110 K. The calculations predict 68-73% equatorial conformer at room temperature. From coalescence temperatures, Gibbs free energies of activation for ring inversion DeltaG++ (eq --> ax) = 5.81(18) and DeltaG++ (ax --> eq) = 5.56(18) kcal mol(-1) were derived. The calculated values for DeltaG++ (eq --> ax) are 5.92 (B3LYP) and 5.84 kcal mol(-1) (mPW1PW91).     

A guide to Sonogashira cross-coupling reactions: the influence of substituents in aryl bromides, acetylenes, and phosphines

The conversion-time data for 168 different Pd/Cu-catalyzed Sonogashira cross-coupling reactions of five arylacetylenes (phenylacetylene; 1-ethynyl-2-ethylbenzene; 1-ethynyl-2,4,6-R(3)-benzene (R = Me, Et, i-Pr)) and Me(3)SiCCH with seven aryl bromides (three 2-R-bromobenzenes (R = Me, Et, i-Pr); 2,6-Me(2)-bromobenzene and three 2,4,6-R(3)-bromobenzenes (R = Me, Et, i-Pr)) with four different phosphines (P-t-Bu(3), t-Bu(2)PCy, t-BuPCy(2), PCy(3)) were determined using quantitative gas chromatography. The stereoelectronic properties of the substituents in the aryl bromides, acetylenes, and phosphines were correlated with the performance in Sonogashira reactions. It was found that the nature of the most active Pd/PR(3) complex for a Sonogashira transformation is primarily determined by the steric bulk of the acetylene; ideal catalysts are: Pd/P-t-Bu(3) or Pd/t-Bu(2)PCy for sterically undemanding phenylacetylene, Pd/t-BuPCy(2) for 2- and 2,6-substituted arylacetylenes or Me(3)SiCCH and Pd/PCy(3) for extremely bulky acetylenes and aryl bromides. Electron-rich and sterically demanding aryl bromides with substituents in the 2- or the 2,6-position require larger amounts of catalyst than 4-substituted aryl bromides. The synthesis of tolanes with bulky groups at one of the two aryl rings is best done by placing the steric bulk at the arylacetylene, which is also the best place for electron-withdrawing substituents.     

Nucleophilic character of a charge neutral, high oxidation state d0 zirconium trimethylenemethane complex

The nucleophilic character of a charge neutral, high oxidation d0 zirconium trimethylenemethane (TMM) class of compound of general structure Cp*Zr(TMM)[N(R1)C(Me)N(R2)], 1a (R1 = R2 = i-Pr) and 1b (R1 = t-Bu, R2 = Et), is presented through documentation of its reactivity with a range of alkyl and silyl halides and triflates, including unactivated ones such as ethyl triflate. These results should contribute to efforts directed toward expanding the synthetic chemist's toolbox of synthetic methods for the construction of complex organic molecules.