Characteristics of excited-state intermediates of TiO2–Y-Zeolite and MCM41 encapsulating photosensitive molecules: design of new photocatalysts

Some photosensitive molecules, such as p-N,N′-dimethylaminobenzoic acid (DMABA), Nile Red, heteropolytungstic acid (H₃PW₁₂O₄₀, HPA) and metalloporphyrins, have been entrapped onto nano-scale pores or channels of TiO₂-modified Y-Zeolite (TiO₂-Y-Zeolite) and MCM41 (TiO₂-MCM41) and their excited-state intermediates have been characterized in terms of the excited-state dynamics by using laser spectroscopic techniques. Through these studies, it has been found that the photo-induced electrons are generated from the intramolecular charge transfer (ICT) state of DMABA, Nile Red or metalloporphyrin (MnTPP(Cl)), followed by transferring to the TiO₂-Y-Zeolite or TiO₂-MCM41 more efficiently as compared to the bulk TiO₂, NaY-Zeolite or MCM41. The efficient photoinduced interfacial electron transfer causes the rapid formation of radicals of those photosensitive molecules (a few tens ps). It has been also found that these photophysical properties can be applied to develop the new photocatalyst as observed by the efficient photocatalytic activities of the DMABA or Nile Red-entrapped TiO₂-Y-Zeolites for the photoreduction of an azo-dye such as Methyl Orange in water. On the other hand, in case of HPA-entrapped TiO₂-Y-zeolite, the electron generated from the excited-state TiO₂ is transferred to HPA, followed by formation of the reduction product, heteropoly blue (HPB) which is also generated by UV irradiation of HPA. This electron transfer is analogous to the Z-scheme mechanism of plant photosynthetic systems showing two photon reactions. Because of this photoelectron transfer mechanism, the HPA-entrapped TiO₂-Y-zeolite has demonstrated the synergistic enhancement of the photocatalytic decomposition of Methyl Orange and hydrogen generation from photolysis of water.     

Extensive Reduction in Back Electron Transfer in Twisted Intramolecular Charge‐Transfer (TICT) Coumarin‐Dye‐Sensitized TiO2 Nanoparticles/Film: A Femtosecond Transient Absorption Study

We report the synthesis, characterization, and optical and electrochemical properties of two structurally similar coumarin dyes ( C1 and C2 ). These dyes have been deployed as sensitizers in TiO₂ nanoparticles and thin films, and the effect of molecular structure on interfacial electron‐transfer dynamics has been studied. Steady‐state optical absorption, emission, and time‐resolved emission studies on both C1 and C2 , varying the polarity of the solvent and the solution pH, suggest that both photoexcited dyes exist in a locally excited (LE) state in solvents of low polarity. In highly polar solvents, however, C1 exists in an intramolecular charge‐transfer (ICT) state, whereas C2 exists in both ICT and twisted intramolecular charge‐transfer (TICT) states, their populations depending on the degree of polarity of the solvent and the pH of the solution. We have employed femtosecond transient absorption spectroscopy to monitor the charge‐transfer dynamics in C1 ‐ and C2 ‐sensitized TiO₂ nanoparticles and thin films. Electron injection has been confirmed by direct detection of electrons in the conduction band of TiO₂ nanoparticles and of radical cations of the dyes in the visible and near‐IR regions of the transient absorption spectra. Electron injection in both the C1 /TiO₂ and C2 /TiO₂ systems has been found to be pulse‐width limited (<100 fs); however, back‐electron‐transfer (BET) dynamics has been found to be slower in the C2 /TiO₂ system than in the C1 /TiO₂ system. The involvement of TICT states in C2 is solely responsible for the higher electron injection yield as well as the slower BET process compared to those in the C1 /TiO₂ system. Further pH‐dependent experiments on C1 ‐ and C2 ‐sensitized TiO₂ thin films have corroborated the participation of the TICT state in the slower BET process in the C2 /TiO₂ system.     

Effect of strong coupling on interfacial electron transfer dynamics in dye-sensitized TiO2 semiconductor nanoparticles

Dynamics of interfacial electron transfer (ET) in ruthenium polypyridyl complex [{bis-(2,2′-bpy)-(4-[2-(4′-methyl-[2,2′]bipyridinyl-4-yl)-vinyl]-benzene-1,2-diol)}ruthenium(II) hexafluorophosphate] (Ru-cat) and 5,10,15-tris phenyl-20-(3,4-dihydroxy benzene) porphyrin (TPP-cat)-sensitized TiO₂ nanoparticles have been investigated using femtosecond transient absorption spectroscopic detection in the visible and near-infrared region. We have observed that both Ru-cat and TPP-cat are coupled strongly with the TiO₂ nanoparticles through their pendant catechol moieties. We have observed a single exponential and pulse-width limited (<100 fs) electron injection from nonthermalized-excited states of Ru-complex. Here electron injection competes with the singlet-triplet manifold relaxation due to strong coupling of catecholate binding, which is a unique observation. Optical absorption spectra indicate that the catechol moiety interacts with TiO₂ nanoparticles showing the characteristic pure catechol-TiO₂ charge-transfer (CT) band in the visible region. Transient absorption studies on TPP-cat/TiO₂ system exciting both the Soret band at 400 nm and the Q-band at 800 nm have been carried out to determine excitation wavelength-dependence on ET dynamics. The reaction channel for the electron-injection process has been found to be different for both the excitation wavelengths. Excitation at 800 nm, is found directly populate directly the excited CT state from where diffusion of electrons into the conduction band takes place. On the other hand, excitation at 400 nm light excites both the CT band of cat-TiO₂ and also Soret band of TPP-cat.     

香豆素343敏化TiO2纳米粒子光致电子转移的荧光和拉曼光谱

通过对香豆素343(C343)染料敏化TiO₂纳米粒子光致电子转移的荧光和拉曼光谱特性的研究表明,C343染料敏化TiO₂纳米粒子稳态吸收光谱和稳态荧光光谱的红移归因于从被吸附的C343染料分子激发态和C343/TiO₂复合物到TiO₂纳米粒子导带的光致电子转移. 由时间分辨荧光光谱确定了C343染料敏化TiO₂纳米粒子的逆向电子转移速率常数为τ₁=31 ps. C343 染料敏化TiO₂纳米粒子体系拉曼光谱的研究表明, 被吸附在界面处的染料分子主链碳键的伸缩振动和碳环的呼吸运动的振动模式对超快界面光致电子转移有着重要的促进作用.     

Peculiarities of interaction of dual-band fluorophores with manganese halides

Formation of coordination complexes of DMABA and DMAP with MnHal₂ (Hal = Cl, Br, I) in ethanol is accompanied by a bathochromic shift of the absorption spectra and quenching of the LE and CT fluorescence bands. Complexation of DMABA with MnHal₂ (Hal = F, Cl, Br) in acetonitrile results in enhancement of the LE fluorescence band with no changes in the CT band. The fluorescence rise at the LE band is explained by the blocking of internal conversion in the rigid complex molecule. The complex formation constants have been calculated, and probable structures of the complexes are presented.     

Reduction of acceptor relay species by conduction band electrons of colloidal titanium dioxide; light-induced charge separation in the picosecond time domain

Photoinduced interfacial electron transfer from the conduction band of colloidal TiO₂ semiconductor particles to the cofacial dimeric viologen DV⁴⁺, an electron acceptor, occurs in the picosecond time domain. The interfacial electron-transfer rate constant is about 2 × 10¹⁰ s⁻¹ at pH 7.8. The reaction involves consecutive one-electron transfer to give the monoreduced DV³⁺ initially, followed by formation of DV²⁺. In acidic aqueous media (pH 3.5) transient picosecond absorption spectra show the formation of the monoreduced species only.     

Picosecond Time Resolved Studies of Photosensitized Electron Injection in Colloidal Semiconductors

Using a single picosecond pulse from a frequency-doubled Nd:YAG-mode-locked laser for excitation, we measured directly the rate of electron injection from the excited singlet state of eosin in the conduction band of colloidal TiO₂ particles. The rate constant for interfacial electron transfer is 9.5 × 10⁸s^?1 at 25°C and pH 3.     

The Effect of Heavy Atoms on Photoinduced Electron Injection from Nonthermalized and Thermalized Donor States of MII–Polypyridyl (M=Ru/Os) Complexes to Nanoparticulate TiO2 Surfaces: An Ultrafast Time‐Resolved Absorption Study

We have synthesized ruthenium(II)– and osmium(II)–polypyridyl complexes ([M(bpy)₂ L ]²⁺, in which M=Os^II or Ru^II, bpy=2,2′‐bipyridyl, and L =4‐(2,2′‐bipyridinyl‐4‐yl)benzene‐1,2‐diol) and studied the interfacial electron‐transfer process on a TiO₂ nanoparticle surface using femtosecond transient‐absorption spectroscopy. Ruthenium(II)‐ and osmium(II)‐based dyes have a similar molecular structure; nevertheless, we have observed quite different interfacial electron‐transfer dynamics (both forward and backward). In the case of the Ru^II/TiO₂ system, single‐exponential electron injection takes place from photoexcited nonthermalized metal‐to‐ligand charge transfer (MLCT) states. However, in the case of the Os^II/TiO₂ system, electron injection takes place biexponentially from both nonthermalized and thermalized MLCT states (mainly ³MLCT states). Larger spin–orbit coupling for the heavier transition‐metal osmium, relative to that of ruthenium, accounts for the more efficient population of the ³MLCT states in the Os^II‐based dye during the electron‐injection process that yields biexponential dynamics. Our results tend to suggest that appropriately designed Os^II–polypyridyl dye can be a better sensitizer molecule relative to its Ru^II analogue not only due to much broader absorption in the visible region of the solar‐emission spectrum, but also on account of slower charge recombination.     

Effect of Keggin-type heteropolyacids on electron transfer in TiO<Subscript>2</Subscript>/conjugated organic polymer (MEH-PPV) hybrid nanocomposites

Electron transfer occurs in composites derived from TiO₂ (TiO₂∙HPA) and MEH-PPV from the polymer macromolecules to the inorganic matrix as indicated by the hypsochromic shift of the absorption and luminescence bands of the polymer as well as an increase in intensity of the EPR signal of the organic radical. The increased efficiency of electron transfer in going from TiO₂/MEH-PPV to TiO₂∙PTA/MEH-PPV and TiO₂∙PMA/MEH-PPV may be related to an increase in this order of electron acceptor properties of the inorganic matrix due to the introduction of HPA.     

分子内电荷转移双重荧光体识别阴离子研究

设计合成阴离子受体是近年来超分子化学中一个颇为活跃的研究领域[1～ 7] .其中荧光法以其高灵敏度和高选择性等特点使发光受体的设计合成备受关注 [6 ,7] .分子内电荷转移 (Intramolecular charge transfer,ICT)原理已被成功地用于构筑阳离子荧光传感体系[8] ,但将其应用于阴离子识别的研究尚鲜见报道[9～ 12 ] .本文设计合成了 ICT荧光体对二甲氨Scheme 1　 The structures of anion receptors基苯甲酰肼 (DMABH,结构见 Scheme 1 ) ,研究了 DMABH与阴离子如 HSO- 4,Ac O- ,H2 PO- 4,Cl O- 4,NO- 3,Cl- 和 Br- 等结合后的光…     

Oligo(p‐phenyleneethynylene) (OPE) Molecular Wires: Synthesis and Length Dependence of Photoinduced Charge Transfer in OPEs with Triarylamine and Diaryloxadiazole End Groups

The systematic synthesis and photophysical, electrochemical and computational studies on an extended series of triphenylamine‐[C?C‐1,4‐C₆H₂(OR)₂]_n‐C?C‐diphenyl‐1,3,4‐oxadiazole dyad molecules (the OR groups are at 2,5‐positions of the para‐phenylene ring and R=C₆H₁₃; n=0–5, compounds 1 , 2 , 3 , 4 and 5 , respectively) are reported. Related molecules with identical end groups, triphenylamine‐C?C‐1,4‐C₆H₂(OR)₂‐C?C‐triphenylamine (R=C₆H₁₃; 6 ) and diphenyl‐1,3,4‐oxadiazole‐[C?C‐C₆H₂(OR)₂]₂‐C?C‐diphenyl‐1,3,4‐oxadiazole (R=C₆H₁₃; 7 ) were also studied. These D–B–A 1 – 5 , D–B–D 6 and A–B–A 7 (D=electron donor, B=bridge, A=electron acceptor) systems were synthesized using palladium‐catalysed cross‐coupling reactions of new p‐phenyleneethynylene building blocks. Steady‐state emission studies on the dyads 1 – 5 reveal a complicated behavior of the emission that is strongly medium dependent. In low polarity solvents the emission is characterized by a sharp high‐energy peak attributed to fluorescence from a locally excited (LE) state. In more polar environments the LE state is effectively quenched by transfer into an intramolecular charge‐transfer (ICT) state. The medium dependence is also observed in the quantum yields (QYs) which are high in cyclohexane and low in acetonitrile, thus also indicating charge‐transfer character. Low‐temperature emission spectra for 2 – 5 in dichloromethane and diethyl ether also reveal two distinct excited states, namely the LE state and the conventional ICT state, depending on solvent and temperature. Hybrid DFT calculations for 1 – 7 establish that the OPE bridge is involved in both frontier orbitals where the bridge character increases as the bridge length increases. Computed TD‐DFT data on 1 – 5 assign the emission maxima in cyclohexane as LE transitions. Each time‐resolved emission measurement on 2 – 7 in cyclohexane and diethyl ether reveals a wavelength dependent bi‐exponential decay of the emission with a fast component in the 5–61 ps range on blue detection and a slower approximately 1 ns phase, independent of detection wavelength. The fast component is attributed to LE fluorescence and this emission component is rate limited and quenched by transfer into an ICT state. The fast LE fluorescence component varies systematically with conjugation length for the series of D–B–A dyads 2 – 5 . An attenuation factor β of 0.15 Å^?1 was determined in accordance with an ICT superexchange mechanism.     

Improving the heterointerface in hybrid organic–inorganic perovskite solar cells by surface engineering: Insights from periodic hybrid density functional theory calculations

A periodic hybrid density functional theory computational strategy is presented to model the heterointerface between the methylammonium lead iodide (MAPI) perovskite and titanium dioxide (TiO₂), as found in perovskite solar cells (PSC), where the 4-chlorobenzoic acid (CBA) ligand is used to improve the stability and the band alignment at the interface. The CBA ligand acts as a bifunctional linker to efficiently connect the perovskite and the oxide moieties, ensuring the stability of the interface through Ti–O and Pb–Cl interactions. The computed density of states reveals that the perovskite contributes to the top of the valence band while the oxide contributes to the bottom of the conduction band with a direct bandgap of 2.16 eV, indicating a possible electron transfer from MAPI to TiO₂. Dipole moment analysis additionally reveals that the CBA ligand can induce a favorable effect to improve band alignment and thus electron transfer from MAPI to TiO₂. This latter has been quantified by calculation of the spin density of the reduced MAPI/CBA/TiO₂ system and indicates an almost quantitative (99.94%) electron transfer from MAPI to TiO₂ for the surface engineered system, together with an ultrafast electron injection time in the femtosecond timescale. Overall, the proposed DFT-based computational protocol therefore indicates that surface engineering and the use of a bifunctional linker can lead to a better stability, together with improved band alignment and electron injection in PSC systems.     

TiO2/Cu2O Core/Ultrathin Shell Nanorods as Efficient and Stable Photocatalysts for Water Reduction

P‐type Cu₂O has been long considered as an attractive photocatalyst for photocatalytic water reduction, but few successful examples has been reported. Here, we report the synthesis of TiO₂ (core)/Cu₂O (ultrathin film shell) nanorods by a redox reaction between Cu²⁺ and in‐situ generated Ti³⁺ when Cu²⁺‐exchanged H‐titanate nanotubes are calcined in air. Owing to the strong TiO₂‐Cu₂O interfacial interaction, TiO₂ (core)/Cu₂O (ultrathin film shell) nanorods are highly active and stable in photocatalytic water reduction. The TiO₂ core and Cu₂O ultrathin film shell respectively act as the photosensitizer and cocatalyst, and both the photoexcited electrons in the conduction band and the holes in the valence band of TiO₂ respectively transfer to the conduction band and valence band of the Cu₂O ultrathin film shell. Our results unambiguously show that Cu₂O itself can act as the highly active and stable cocatalyst for photocatalytic water reduction.     

表面In掺杂TiO2的N719/TiO2-Inx%/FTO薄膜电极的光电转换效率

采用溶胶-凝胶法制备出In 表面修饰的TiO₂ (TiO₂-Inx%)纳米粒子, x%代表在In 掺杂的TiO₂样品中In³⁺与In³⁺和Ti⁴⁺离子摩尔百分含量. 利用二(四丁基铵)顺式-双(异硫氰基)双(2,2''-联吡啶-4,4''-二羧酸)钌(II)(N719)作为敏化剂, 制备出N719/TiO₂/FTO (氟掺杂锡氧化物)和N719/TiO₂-Inx%/FTO染料敏化薄膜电极. 光电转换效率实验表明, 在薄膜电极+0.5 mol·L^-1 LiI+0.05 mol·L^-1 I₂的三甲氧基丙腈(MPN)溶液+Pt 光电池体系中,N719/TiO₂-Inx%/FTO薄膜电极的光电转换效率均高于N719/TiO₂/FTO, 其中N719/TiO₂-In0.1%/FTO的光电转换效率比N719/TiO₂/FTO提高了20%. 利用X 射线衍射(XRD)、X 射线光电子能谱(XPS)、漫反射吸收光谱(DRS)、荧光(PL)光谱和表面光电流作用谱确定了TiO₂-Inx%样品中In3+离子的存在方式和能带结构; 利用表面光电流作用谱研究了N719/TiO₂-Inx%/FTO薄膜电极的光致界面电荷转移过程. 结果表明, In3+离子在TiO₂表面形成O-In-Cl_n (n=1, 2)物种, 该物种的表面态能级位于导带下0.3 eV处; 在光电流产生过程中, O-In-Cl_n (n=1, 2)表面态能级有效地抑制了光生载流子在TiO₂-Inx%层的复合, 促进了阳极光电流的增加, 从而导致N719/TiO₂-Inx%/FTO薄膜电极的光电转化效率高于N719/TiO₂/FTO, 并进一步讨论了光致界面电荷转移的机理.     

CdSe量子点敏化纳米二氧化钛太阳电池的电化学交流阻抗谱

量子点敏化纳米TiO2太阳电池(QDSSCs)具有诱人的发展前景,但是与传统的染料敏化太阳电池(DSSCs)相比,其目前的光电转换效率还非常低(仅为3%左右).为了寻找QDSSCs光电转换效率低的原因,本文主要采用外加偏压下的交流阻抗谱技术对通常以S2-/S-x离子对为电解质的CdSe胶体量子点敏化纳米TiO2电极的准...     

Synthesis of bimodal porous structured TiO2 microsphere with high photocatalytic activity for water treatment

In this work bimodal structured titanium dioxide (TiO₂) microsphere has been prepared from commercial TiO₂ powder and nano-sized titania gel via sol–gel spray-coating technique. Crystallization and transformation behavior of titania gel were investigated. The results revealed that the crystallization and transformation of anatase particles were substantially affected by the concentration of solvent and calcination temperature. Anatase crystallite size of 10 nm was obtained at mole ratio of solvent/precursor 50/1 and calcination temperature of 450 °C. The prepared nano-sized titania gel was embedded within the core (commercial TiO₂, P25) during the spraying process. The prepared TiO₂ microsphere was characterized using X-ray diffractometer (XRD), scanning electron microscope (SEM), field emission electron microscope (FESEM) and micropore analysis. The photocatalytic activity was monitored by following the degradation of phenol with activity benchmarked against commercial P25 (Degussa). The increase of photocatalytic activity of TiO₂ microsphere was attributed to the nano-sized anatase crystallite which has been incorporated into the TiO₂ microsphere.     

Intercomponent and interfacial electron transfer processes in polynuclear metal complexes anchored on transparent TiO2 films

A series of polynuclear complexes based on Ru^II, Os^II, Re^I and Rh^III polypyridine moieties have been prepared in the context of intramolecular energy and electron transfer studies and of interfacial electron transfer with nanocrystalline TiO₂. The polynuclear complexes allow for the occurrence of vectorial intramolecular energy and electron transfer and have been proven to be efficient sensitizers of the wide band-gap semiconductor. The performance of photoregenerative cells based on these systems and the dynamics of the excited state intramolecular processes and of the interfacial electron transfer processes are discussed.     

Influence of Zn(II) adsorption on the photocatalytic activity and the production of H2O2 over irradiated TiO2

The photocatalytic activity of semiconductor oxides, in particular TiO₂ powders or colloids, is a complex function of bulk (light absorption and scattering, charge carrier mobility and recombination rate) and surface (structure, defects and reconstruction, charge, presence of adsorbate, surface recombination centers) properties. Among surface modifications, the inner sphere surface complexation of metal cations can change the surface charge of the metal oxide, thus changing the surface activity coefficient of ionic substrates, the band edge positions, as well as the mechanism and kinetic of interfacial electron transfer by blocking surface trapping sites for photogenerated carriers (≡Ti?OH). In this work we show that in anatase/water systems under band-gap irradiation, both the organic substrate (formate) oxidation initiated by photogenerated valence band holes and the formation of hydrogen peroxide from O₂ reduction (by conduction band electrons) is strongly influenced by the presence of Zn²⁺ cations. Depending on the pH, the formate oxidation rate can be enhanced or nearly completely inhibited. The observed result can be rationalized by considering the fraction of ≡Ti?OH surface sites blocked by inner sphere complexation of Zn²⁺ as a function of pH. When this fraction is low, the more positive surface charge favors formate oxidation, whereas when the fraction is high the almost complete blockage of ≡Ti?OH surface sites by Zn²⁺ stops almost entirely formate oxidation. Interestingly, the surface complexation of Zn²⁺ is accompanied by an increasing production of H₂O₂ during formate degradation in the presence of O₂. Zn(II) cations are not complexed by peroxide/superoxide species derived from O₂ reduction. When ≡Ti?OH sites are blocked by Zn²⁺, the complexation on the TiO₂ surface of peroxide/superoxide species is inhibited, hindering their further transformation. The results presented demonstrate that the combined effect of pH and surface complexation of redox inert cations greatly influences both the oxidative and reductive processes during the photocatalytic process over TiO₂.     

Understanding the Electronic Structures of Graphene Quantum Dot Physisorption and Chemisorption onto the TiO2 (110) Surface: A First‐Principles Calculation

We investigated the interfacial electronic structure and charge transfer properties of graphene quantum dot (GQD) physisorption and chemisorption on the TiO₂ (110) surface from density functional theory calculations. The simulations show that a slight charge transfer occurs in physisorption case while a significant charge transfer takes place in chemisorption configuration. We present a detailed comparison of the similarities and differences between the electronic structures. The similarities originate from the positive work function difference in both the physisorption and chemisorption configurations, which is able to drive electron transfer from GQD into TiO₂, leading to charge separation across the GQD–TiO₂ interface. The differences stem from the interaction between the GQD and TiO₂ substrate. For example, GQD bounds to TiO₂ surface through van der Waals interactions in the case of physisorption. In the chemisorption configuration, however, there exists strong covalent bonding between them. This leads to much more efficient charge separation for chemisorption than for physisorption. Furthermore, the GQD–TiO₂ composites show large band‐gap narrowing that could extend the optical absorption edge into the visible‐light region. This should imply that chemisorbed GQDs produce a composite with better photocatalytic and photovoltaic performance than composites formed through physisorption.     

Effect of Substituents in Catechol Dye Sensitizers on Photovoltaic Performance of Type II Dye‐Sensitized Solar Cells

In order to provide a direction in molecular design of catechol (Cat) dyes for type II dye‐sensitized solar cells (DSSCs), the dye‐to‐TiO₂ charge‐transfer (DTCT) characteristics of Cat dyes with various substituents and their photovoltaic performance in DSSCs are investigated. The Cat dyes with electron‐donating or moderately electron‐withdrawing substituents exhibit a broad absorption band corresponding to DTCT upon binding to TiO₂ films, whereas those with strongly electron‐withdrawing substituents exhibit weak DTCT. This study indicates that the introduction of a moderately electron‐withdrawing substituent on the Cat moiety leads to not only an increase in the DTCT efficiency, but also the retardation of back electron transfer. This results in favorable conditions for the type II electron‐injection pathway from the ground state of the Cat dye to the conduction band of the TiO₂ electrode by the photoexcitation of DTCT bands.