Optical Properties of Single-Walled Carbon Nanotubes Separated in a Density Gradient; Length, Bundling, and Aromatic Stacking Effects

Single-walled carbon nanotubes (SWNTs) are promising materials for in vitro and in vivo biological applications due to their high surface area and inherent near infrared photoluminescence and Raman scattering properties. Here, we use density gradient centrifugation to separate SWNTs by length and degree of bundling. Following separation, we observe a peak in photoluminescence quantum yield (PL QY) and Raman scattering intensity where SWNT length is maximized and bundling is minimized. Individualized SWNTs are found to exhibit high PL QY and high resonance-enhanced Raman scattering intensity. Fractions containing long, individual SWNTs exhibit the highest PL QY and Raman scattering intensities, compared to fractions containing single, short SWNTs or SWNT bundles. Intensity gains of approximately ~1.7 and 4-fold, respectively, are obtained compared with the starting material. Spectroscopic analysis reveals that SWNT fractions at higher displacement contain increasing proportions of SWNT bundles, which causes reduced optical transition energies and broadening of absorption features in the UV-Vis-NIR spectra, and reduced PL QY and Raman scattering intensity. Finally, we adsorb small aromatic species on "bright," individualized SWNT sidewalls and compare the resulting absorption, PL and Raman scattering effects to that of SWNT bundles. We observe similar effects in both cases, suggesting aromatic stacking affects the optical properties of SWNTs in an analogous way to SWNT bundles, likely due to electronic structure perturbations, charge transfer, and dielectric screening effects, resulting in reduction of the excitonic optical transition energies and exciton lifetimes.     

Time- and polarization-resolved optical spectroscopy of colloidal CdSe nanocrystal quantum dots in high magnetic fields

In an effort to elucidate the spin (rather than charge) degrees of freedom in colloidal semiconductor nanocrystal quantum dots, we report on a series of static and time-resolved photoluminescence measurements of colloidal CdSe quantum dots in ultrahigh magnetic fields up to 45 T. At low temperatures (1.5-40 K), the steady-state photoluminescence (PL) develops a high degree of circular polarization with applied magnetic field, indicating the presence of spin-polarized excitons. Time-resolved PL studies reveal a marked decrease in radiative exciton lifetime with increasing magnetic field and temperature. Except for an initial burst of unpolarized PL immediately following photoexcitation, high-field time-resolved PL measurements reveal a constant degree of circular polarization throughout the entire exciton lifetime, even in the presence of pronounced exciton transfer via F?rster energy transfer processes.     

Self-trapping limited exciton diffusion in a monomeric perylene crystal as revealed by femtosecond transient absorption microscopy

Self-trapping and singlet-singlet annihilation of the free excitons in a monomeric (beta) perylene crystal were studied by using femtosecond transient absorption microscopy. The free exciton generated by the photo-excitation of the beta-perylene crystal relaxed to the self-trapped exciton with a rate constant of 7 x 10(10) s(-1). The singlet-singlet annihilation of the free exciton observed under the high excitation density conditions was competed with the self-trapping of the free exciton; we estimated the annihilation rate constant for the free exciton to be 1 x 10(-8) cm(3) s(-1) from the excitation density dependence of the free exciton decay. After self-trapping of the free exciton, no annihilation was observed in the 100 ps time range, suggesting that the diffusion coefficient was reduced drastically by self-trapping. The results show that the major factor limiting the exciton diffusion in the beta-perylene crystal is a relaxation of the free exciton to the self-trapped exciton, and not the lifetime of the exciton. Though the singlet-singlet annihilation rate constants and fluorescence lifetime of the beta-perylene crystal are similar to those of the anthracene crystal, the estimated exciton diffusion length (2 nm) in the beta-perylene crystal is much smaller than that (100 nm) in the anthracene crystal as a result of the exciton self-trapping.     

Exciton energy transfer-assisted photoluminescence brightening from freestanding single-walled carbon nanotube bundles

Photoluminescence (PL) brightening is clearly observed through the direct morphology transition from isolated to thin bundled vertically- and individually freestanding single-walled carbon nanotubes (SWNTs). On the basis of the precise spectra analysis and equation-based estimation of the PL time trace, the origin of the PL brightening is consistently explained in terms of the exciton energy transfer through the tube bundles. The PL brightening is also revealed to obviously depend on SWNT diameters. Only the small-diameter rich sample can realize the PL brightening, which can be explained by the different concentrations of metallic SWNTs causing a PL quenching. Since it can be possible to fabricate brightly illuminating nanotubes on various kinds of substrates, the bundle engineering with freestanding nanotubes is expected to be a potential candidate for realizing the nanotube-based PL device fabrication.     

The role of excitons' quasiequilibrium in the temperature dependence of the poly(9,9-dioctylfluorene) beta phase photoluminescence

We investigated the temperature dependence of the poly(9,9-dioctylfluorene) beta phase photoluminescence (PL) spectra in spin coated thin films from tetrahydrofuran solutions. As the temperature increases from 18 to 300 K a continuous blueshift of the 0-0 PL peak of about 25 meV and an increase of the peak full width at half maximum (FWHM) of about 49 meV are observed. We show that the PL spectra temperature dependence is not due to a temperature dependent average conjugation length, as often assumed, but instead it can be quantitatively explained in the frame of a thermal quasiequilibrium model for excitons in an inhomogeneously broadened excited states distribution. We demonstrate that the emission blueshift and broadening are mainly due to the increase of the excitons' temperature with the sample one. This effect is partially compensated by an increasing efficiency of the exciton energy migration. The interplay between these two processes quantitatively explains the observed temperature dependence of the PL peak energy and of its FWHM. On the contrary we show that the PL spectra are almost independent of the absorption blueshift with temperature.     

Optical and field emission properties of thin single-crystalline GaN nanowires

Thin high-quality gallium nitride (GaN) nanowires were synthesized by a catalytic chemical vapor deposition method. The synthesized GaN nanowires with hexagonal single-crystalline structure had thin diameters of 10-50 nm and lengths of tens of micrometers. The thin GaN nanowires revealed UV bands at 3.481 and 3.285 eV in low-temperature PL measurements due to the recombination of donor-bound excitons and donor-acceptor pairs, respectively. The blue shifts of UV bands in the low-temperature PL measurement were observed, indicating quantum confinement effects in the thin GaN nanowires which have smaller diameters than the exciton Bohr radius, 11 nm. For field emission properties of GaN nanowires, the turn-on field of GaN nanowires was 8.5 V/microm and the current density was about 0.2 mA/cm(2) at 17.5 V/microm, which is sufficient for the applications of field emission displays and vacuum microelectronic devices. Moreover, the GaN nanowires indicated stronger emission stability compared with carbon nanotubes.     

Interplay between intrachain and interchain interactions in semiconducting polymer assemblies: the HJ-aggregate model

A new model for analyzing the photophysics of polymer aggregates is introduced taking into account exciton motion along a polymer chain and across polymer chains. Excitonic coupling and vibronic coupling are treated on equal footing using a Holstein-based Hamiltonian represented in a multi-particle basis set. In the HJ-aggregate model the competition between intrachain (through-bond) coupling leading to Wannier-Mott excitons, and interchain (through-space) coupling leading to Frenkel excitons, is studied in detail for two model dimers: one composed of red-phase polydiacetylene (PDA) chains and the other composed of regioregular P3HT chains. The resulting photophysical properties are shown to depend critically on the relative magnitudes of the intrachain and interchain exciton bandwidths. Dominant intraband (interband) coupling favors a photophysical response resembling J-aggregates (H-aggregates). In PDA dimers, where intrachain coupling prevails, the absorption spectrum is dominated by the 0-0 peak, as is characteristic of J-aggregates. The photoluminescence (PL) spectrum displays hybrid character: the ratio of the main (0-0) band to the first vibronic sideband intensities is initially zero at T = 0 K due to the forbidden nature of the 0-0 transition, but then increases with temperature in a manner characteristic of H-aggregates, peaking when kT ≈ ΔE, where ΔE is the interchain splitting. Further increases in temperature result in a decline of the PL ratio, as in a J-aggregate. This remarkable H to J transition is also predicted for the temperature dependence of the radiative decay rate, k(rad). The maximum (peak) rate scales as, k(rad) (max)～(W(intra)/W(inter))(1/2), where W(intra) (W(inter)) is the intrachain (interchain) exciton bandwidth. Hence, when W(intra) is sufficiently larger than W(inter) the dimer displays thermally activated superradiance. In P3HT the intrachain coupling is far weaker than in PDA making the intrachain and interchain couplings comparable in the crystalline phase. Although the absorption spectral line shape is still well-accounted for by the conventional H-aggregate model, the photoluminescence is more sensitive, with H or J behavior tunable by changes in morphology. Long range intrachain order which coincides with weaker interchain interactions induces J-aggregate behavior, while short range intrachain order and the resulting stronger interchain coupling induces H-aggregate behavior. Our predictions neatly account for the H-like dominance exhibited by the PL from spin-cast films and the J-like dominance exhibited by the PL from highly ordered P3HT nanofibers self-assembled in toluene.     

Photoreflectance investigation of exciton-acoustic phonon scattering in GaN grown by MOVPE

In this paper, we report a systematic investigation of the near band edge (NBE) excitonic states in GaN using low temperature photoluminescence (PL) and photoreflectance (PR) measurements. For this purpose, GaN films of different thicknesses have been grown on silicon nitride (SiN) treated c-plane sapphire substrates by atmospheric pressure metalorganic vapor phase epitaxy (MOVPE). Low temperature PR spectra exhibit well-defined spectral features related to the A, B and C free excitons denoted by FX_A FX_B and FX_C, respectively. In contrast, PL spectra are essentially dominated by the A free and donor bound excitons. By combining PR spectra and Hall measurements a strong correlation between residual electron concentration and exciton linewidths is observed. From the temperature dependence of the excitonic linewidths, the exciton-acoustic phonon coupling constant is determined for FX_A, FX_B and FX_C. We show that this coupling constant is strongly related to the exciton kinetic energy and to the strain level.     

Photoluminescence study of sexithiophene thin films

To determine the exciton diffusion length of sexithiophene (6T) thin films, quenching of the photoluminescence (PL) of vacuum-deposited 6T films on TiO2 and on quartz has been investigated. For films with a thickness of more than 22 nm and at temperatures below 100 K, additional PL lines appear in luminescence spectra. This feature is related to the structural properties of 6T films. The PL intensity is thermally activated with an activation energy of 18 meV on TiO2 and 6 meV on quartz. When 6T is applied on TiO2, exciton quenching occurs for films up to 120 nm. For 6T on quartz this value is reduced to 60 nm. By comparing the relative luminescence intensities of 6T on quartz and on TiO2 substrates, an exciton diffusion length of 60 +/- 5 nm is derived.     

One-dimensional exciton diffusion in perylene bisimide aggregates

The dynamics and mobility of excitons in J-aggregates of perylene bisimides are investigated by transient absorption spectroscopy with a time resolution of 50 fs. The transient spectra are compatible with an exciton delocalization length of two monomers and indicate that vibrational and configurational relaxation processes are not relevant for the spectroscopic properties of the aggregates. Increasing the pump pulse energy and in that way the initial exciton density results in an accelerated signal decay and pronounced exciton-exciton annihilation dynamics. Modeling the data by assuming a diffusive exciton motion reveals that the excitons cannot migrate freely in all three directions of space but their mobility is restricted to one dimension. The observed anisotropy supports this picture and points against direct Fo?rster-transfer-mediated annihilation between the excitons. A diffusion constant of 1.29 nm(2)/ps is deduced from the fitting procedure that corresponds to a maximal exciton diffusion length of 96 nm for the measured exciton lifetime of 3.6 ns. The findings indicate that J-aggregates of perylene bisimides are promising building blocks to facilitate directed energy transport in optoelectronic organic devices or artificial light-harvesting systems.     

Efficient exciton transport in layers of self-assembled porphyrin derivatives

The photosynthetic apparatus of green sulfur bacteria, the chlorosome, is generally considered as a highly efficient natural light-harvesting system. The efficient exciton transport through chlorosomes toward the reaction centers originates from self-assembly of the bacteriochlorophyll molecules. The aim of the present work is to realize a long exciton diffusion length in an artificial light-harvesting system using the concept of self-assembled natural chlorosomal chromophores. The ability to transport excitons is studied for porphyrin derivatives with different tendencies to form molecular stacks by self-assembly. A porphyrin derivative denoted as ZnOP, containing methoxymethyl substituents ({meso-tetrakis[3,5-bis(methoxymethyl)phenyl]porphyrinato}zinc(II)) is found to form self-assembled stacks, in contrast to a derivative with tert-butyl substituents, ZnBuP ({meso-tetrakis[3,5-bis(tert-butyl)phenyl]porphyrinato}zinc(II)). Exciton transport and dissociation in a bilayer of these porphyrin derivatives and TiO2 are studied using the time-resolved microwave conductivity (TRMC) method. For ZnOP layers it is found that excitons undergo diffusive motion between the self-assembled stacks, with the exciton diffusion length being as long as 15 +/- 1 nm, which is comparable to that in natural chlorosomes. For ZnBuP a considerably shorter exciton diffusion length of 3 +/- 1 nm is found. Combining these exciton diffusion lengths with exciton lifetimes of 160 ps for ZnOP and 74 ps for ZnBuP yields exciton diffusion coefficients equal to 1.4 x 10(-6) m2/s and 1 x 10(-7) m2/s, respectively. The larger exciton diffusion coefficient for ZnOP originates from a strong excitonic coupling for interstack energy transfer. The findings show that energy transfer is strongly affected by the molecular organization. The efficient interstack energy transfer shows promising prospects for application of such self-assembled porphyrins in optoelectronics.     

Generation and decay dynamics of triplet excitons in Alq3 thin films under high-density excitation conditions

We studied the generation and decay dynamics of triplet excitons in tris-(8-hydroxyquinoline) aluminum (Alq3) thin films by using transient absorption spectroscopy. Absorption spectra of both singlet and triplet excitons in the film were identified by comparison with transient absorption spectra of the ligand molecule (8-hydroxyquinoline) itself and the excited triplet state in solution previously reported. By measuring the excitation light intensity dependence of the absorption, we found that exciton annihilation dominated under high-density excitation conditions. Annihilation rate constants were estimated to be gammaSS = (6 +/- 3) x 10(-11) cm3 s(-1) for single excitons and gammaTT = (4 +/- 2) x 10(-13) cm3 s(-1) for triplet excitons. From detailed analysis of the light intensity dependence of the quantum yield of triplet excitons under high-density conditions, triplet excitons were mainly generated through fission from highly excited singlet states populated by singlet-singlet exciton annihilation. We estimated that 30% of the highly excited states underwent fission.     

八-羟基喹啉铝薄膜光致发光的厚度依赖性质

In situ thickness dependent photoluminescence (PL) measurements of tris(8-hydroxyquinoline) aluminum(Alq3) film were performed. At the beginning of Alq3 deposition on the glass substrate, the Alq3 emission showed a sharp red-shift. Further deposition of Alq3 resulted slight red-shift, and finally tended to saturated value. The total red-shift of about 12 nm was observed for the Alq3 film thickness range from 2 to 500 nm.This red-shift was attributed to the change from the 2D to 3D exciton state with increasing Alq3 film thickness. Meanwhile, the PL intensity of Alq3 emission increased continuously, and showed a rate change at the initial deposition of Alq3 due to non-rediative decay of excitons arised from the interaction between excitons and the substrate, and finally tended to saturation with the Alq3 thickness.     

High-efficiency carrier multiplication and ultrafast charge separation in semiconductor nanocrystals studied via time-resolved photoluminescence

We demonstrate novel methods for the study of multiple exciton generation from a single photon absorption event (carrier multiplication) in semiconductor nanocrystals (or nanocrystal quantum dots) that are complementary to our previously reported transient absorption method. By monitoring the time dependence of photoluminescence (PL) from CdSe nanocrystals via time-correlated single photon counting, we find that carrier multiplication is observable due to the Auger decay of biexcitons. We compare these data with similar studies using transient absorption and find that the two methods give comparable results. In addition to the observation of dynamical signatures of carrier multiplication due to the Auger decay, we observe spectral signatures of multiple excitons produced from the absorption of a single photon. PL spectra at short times following excitation with high-energy photons are red-shifted compared to the single-exciton emission band, which is consistent with previous observations of significant exciton-exciton interactions in nanocrystals. We then show using a combination of transient absorption and time-resolved PL studies that charge transfer between a nanocrystal and a Ru-based catalyst model compound takes place on a time scale that is faster than Auger recombination time constants, which points toward a possible design of donor-acceptor assemblies that can be utilized to take advantage of the carrier multiplication process.     

Transport of excitation energy in a three-dimensional doped molecular crystal. IV. Fourth-order propagation,exciton clothing,and exciton diffusion

The problem of excitons in interaction with phonons in a molecular crystal has been reinvestigated as a continuation of our earlier work. The exciton-phonon interaction has been taken to be linear in lattice displacements. The external medium, the phonon assembly, has been considered to be in thermal equilibrium. Following Simons, we have incorporated the effects of the medium on the exciton dynamics into a time-dependent effective potential that contains the equilibrium average exciton-phonon interaction as well as terms arising from the fluctuations in the medium's coordinates about their equilibrium values. A correlation function that represents the probability of exciton transfer has been given in the interaction picture. The time evolution of this correlation function has been determined by following Kubo's technique of cumulant expansion. The zeroth-, second-, and fourth-order contributions to the correlation function have been calculated in this way. The second- and fourth-order contributions have been diagrammatically represented. The second-order contribution has been explicitly calculated in different physical limits, namely, the slow exciton and the slow phonon limits at high and low temperatures and for very large and very small time. A few simple formulas for the transfer probability of a bare exciton in a molecular crystal of cubic symmetry have been derived from the Debye approximation for the dispersion of phonons. It has been specifically shown that the sum over phonon modes in the large time dynamics leads to a fully destructive interference in second order at a very low temperature and gives rise to a diffusive transport at a high enough temperature. A natural way of clothing the excitons has been considered and the clothed exciton has been represented diagrammatically. The dressing requires the correlation function to be redefined in terms of the clothed states and the clothed operators. The clothed exciton correlation function that represents the probability of transfer of excitons fully clothed by the phonons in thermal equilibrium turns out to be identical with the bare exciton correlation function. This attaches a novel interpretation to the correlation function which was originally defined by Simons. Transfer probabilities for a clothed exciton in a cubic crystal has been explicitly worked out for different physical limits under the Debye model of phonon dispersion. From these results a few expressions for the macroscopic diffusion coefficient of the clothed exciton have been obtained. A few critical comments have been incorporated. © 1996 John Wiley & Sons, Inc.     

Exciton trapping at heterojunctions in polymer blends

Optoelectronic devices made from semiconductor polymers often employ partially phase-separated binary polymer blends with "distributed heterojunctions" in the polymer film, and the migration of bulk excitons towards these heterojunctions crucially influences the device performance. Here, we investigate exciton migration in blend films of two polyfluorene derivatives. Localized exciplex states form in electron-hole capture at the heterojunction between the two polymers and these can be thermally excited to transfer to bulk excitons. Rapid radiative emission from these excitons can then allow efficient light-emitting diode operation. We show here that when these excitons migrate to another heterojunction site within their lifetime they are re-trapped at the interface and again form exciplex states or dissociate completely. We demonstrate that in polymer blend light-emitting diodes this can reduce the exciton population by more than 54% and can strongly influence the emission spectrum. We then analyze exciton re-trapping in detail using time-resolved photoluminescence spectroscopy on blends with different morphologies and find that for nanometer-scale phases exciton emission is completely suppressed. We show that the data agree well with a simple kinetic model which confirms the importance of the blend morphology for the exciton trapping efficiency.     

Tuning the excitonic and plasmonic properties of copper chalcogenide nanocrystals

The optical properties of stoichiometric copper chalcogenide nanocrystals (NCs) are characterized by strong interband transitions in the blue part of the spectral range and a weaker absorption onset up to ~1000 nm, with negligible absorption in the near-infrared (NIR). Oxygen exposure leads to a gradual transformation of stoichiometric copper chalcogenide NCs (namely, Cu(2-x)S and Cu(2-x)Se, x = 0) into their nonstoichiometric counterparts (Cu(2-x)S and Cu(2-x)Se, x > 0), entailing the appearance and evolution of an intense localized surface plasmon (LSP) band in the NIR. We also show that well-defined copper telluride NCs (Cu(2-x)Te, x > 0) display a NIR LSP, in analogy to nonstoichiometric copper sulfide and selenide NCs. The LSP band in copper chalcogenide NCs can be tuned by actively controlling their degree of copper deficiency via oxidation and reduction experiments. We show that this controlled LSP tuning affects the excitonic transitions in the NCs, resulting in photoluminescence (PL) quenching upon oxidation and PL recovery upon subsequent reduction. Time-resolved PL spectroscopy reveals a decrease in exciton lifetime correlated to the PL quenching upon LSP evolution. Finally, we report on the dynamics of LSPs in nonstoichiometric copper chalcogenide NCs. Through pump-probe experiments, we determined the time constants for carrier-phonon scattering involved in LSP cooling. Our results demonstrate that copper chalcogenide NCs offer the unique property of holding excitons and highly tunable LSPs on demand, and hence they are envisaged as a unique platform for the evaluation of exciton/LSP interactions.     

Long distance energy transfer in a polymer matrix doped with a perylene dye

Exciton migration over long distances is a key issue for various applications in organic electronics. We investigate a disordered material system which has the potential for long exciton diffusion lengths in combination with a high versatility. The perylene bisimide dye Perylene Red is incorporated in a polymer matrix with a high concentration. The dye molecules represent active sites with a narrow energy distribution for the electronically excited states. Excitons can be efficiently exchanged between them by F?rster resonance energy transfer (FRET). The narrow energy distribution reduces drastically the trapping probability of the excitons compared to polymers and allows for long transfer distances. To characterize the mobility of the excitons and their diffusion length the dye Oxazine 1 is added as an acceptor in low concentration and the transfer probability to the acceptor is determined by measuring the reduction of Perylene Red fluorescence. The quenched quantum yield is measured for dye concentrations varying from 0.05?M to 0.15 M for Perylene Red and from 0.3 mM to 3 mM for Oxazine 1. The experimental results are compared to a model which assumes that excitons can diffuse through the material by FRET between Perylene Red sites and are trapped at an acceptor with a final hetero FRET step. We find a quite good match between theory and experiment though the observed diffusion constant is about two times smaller than the calculated one. The exciton diffusion length extracted from the data is 30 nm for a Perylene Red concentration of 0.1 M and demonstrates that long distance energy transfer is possible in this disordered material system.     

Charge-transfer excitons in DNA

There have been a number of theoretical treatments of excitons in DNA, most neglecting both the intrachain and interchain wavefunction overlaps of the electron and hole, treating them as Frenkel excitons. Recently, the importance of the intrachain and interchain coupling has been highlighted. Experiments have shown that in (dA)n oligomers and in duplex (dA)n.(dT)n, to be abbreviated (A/T), where A is adenine and T is thymine, the exciton wavefunction is delocalized over several bases. In duplexes it is possible to have charge-transfer (CT) excitons. Theoretical calculations have suggested that CT excitons in DNA may have lower energy than single chain excitons. In all the calculations of excitons in DNA, the polarization of the surrounding water has been neglected. Calculations have shown, however, that polarization of the water by an excess electron or a hole in DNA lowers its energy by approximately 1/2 eV, causing it to become a polaron. It is therefore to be expected that polarization charge induced in the surrounding water has a significant effect on the properties of the exciton. In what follows, we present calculations of some properties CT excitons would have in an A/T duplex taking into account the wavefunction overlaps, the effect of the surrounding water, which results in the electron and hole becoming polarons, and the ions in the water. As expected, the CT exciton has lowest energy when the electron and hole polarons are directly opposite each other. By appropriate choice of the dielectric constant, we can obtain a CT exciton delocalized over the number of sites found in photoinduced absorption experiments. The absorption threshold that we then calculate for CT exciton creation in A/T is in reasonable agreement with the lowest singlet absorption deduced from available data.