Solution absorption and luminescence studies of tetraphenylboron, -carbon, -silicon, -germanium, -tin, -lead, -phosphorus, -arsenic,and -antimony

The lowest absorption band of the tetraphenyl compounds resembles that of the lowest absorption band of benzene with the following difference. In benzene the electronic origin is strictly forbidden, and all intensity is associated with a symmetric progression built on one mode of asymmetric vibration. In the tetraphenyl compounds the intensity associated with the asymmetric vibration is relatively unaffected; however, there is increasing intensity associated with the electronic origin and a symmetric progression built on it along the series

$\text{φ}{}_4\text{Pb}\text{< φ}{}_4\text{Sn}\text{< φ}{}_4\text{Ge}\text{< φ}{}_4\text{Si}\text{< φ}{}_4\text{C}\text{? φ}{}_4\text{B}{}^{\mathrm{?}}\text{< φ}{}_4\text{Sb}{}^{\mathrm{+}}\text{< φ}{}_4\text{As}{}^{\mathrm{+}}\text{< φ}{}_4\text{P}{}^{\mathrm{+}}$

. For the cations it is the electronic origin and the progression built on it that are the primary source of intensity. This effect is attributed to an inductive perturbation. A similar effect is observed in the fluorescence spectrum. In phosphorescence, the relative enhancement of the electronic origin and the progression built on it is far less marked. The phosphorescence emission of φ₄Pb and φ₄Sb⁺ are red shifted from the others by ～0.5 eV, an effect attributed to formation of a triplet excimer. Increasing spin-orbit coupling in the triplet due to a heavy atom effect can be seen in the decreasing phosphorescence lifetime (range 4 sec to 4 msec) and decreasing ratio of $\text{φ}{}_{\mathrm{f}}\text{φ}{}_{\mathrm{p}}$ (fluorescence to phosphorescence quantum yields) in the order

$\text{φ}{}_4\text{C}\text{> φ}{}_4\text{B}\text{> φ}{}_4\text{Si}\text{> φ}{}_4\text{P}{}^{\mathrm{+}}\text{> φ}{}_4\text{Ge}\text{> φ}{}_4\text{As}{}^{\mathrm{+}}\text{> φ}{}_4\text{Sn}$

In all cases nonexponential decay of phosphorescence is observed.     

Structural, energetic, and electronic properties of Sin, Gen, and SinGen clusters

Results of a theoretical study of the properties of Si_n, Ge_n, and Si_nGe_n clusters are presented. An approximate density-functional method in combination with genetic algorithms have been used in an unbiased determination of the structures of the lowest total energy. The resulting structural, energetic, and electronic properties are analysed and compared with each other for the different systems.     

Mesomorphic, dielectric, and optical properties of fluorosubstituted biphenyls, terphenyls, and quaterphenyls

Compounds with moderate and large negative dielectric anisotropy (Δɛ) are very attractive liquid crystal (LC) for vertical alignment mode (VA). Materials with such properties can be achieved by lateral substitution of a polar group into a mesogenic molecule. We synthesized some new LC materials with a negative value of Δɛ, a moderately high birefringence (Δn), and a low viscosity. The mesomorphic and physical behaviour of the novel biphenyls, terphenyls and quaterphenyls fluorosubstituted in the rigid core and also with fluorinated alkyl and alkoxy chains are investigated. The prepared series of four LC compounds are promising for new LC mixtures for various applications. Examples of nematic mixtures with Δɛ∼−3.25 will be presented.     

Cointegration of output, capital, labor, and energy

Cointegration analysis is applied to the linear combinations of the time series of (the logarithms of) output, capital, labor, and energy for Germany, Japan, and the USA since 1960. The computed cointegration vectors represent the output elasticities of the aggregate energy-dependent Cobb-Douglas function. The output elasticities give the economic weights of the production factors capital, labor, and energy. We find that they are for labor much smaller and for energy much larger than the cost shares of these factors. In standard economic theory output elasticities equal cost shares. Our heterodox findings support results obtained with LINEX production functions.     

Intrinsic and Zn-, Ce-, Tb-, Er-, Sm-, and Eu-Activated photoluminescence of pseudoamorphous GaN and InGaN thin films

Thin films of pseudoamorphous GaN (a-nc-GaN), as well as of its alloys with indium, In_xGa_1−x N (x=0.04, 0.16), were prepared by magnetron sputtering of a metallic target in the plasma of a reactive nitrogen and argon mixture. The a-nc-GaN films were codoped by the Zn acceptor impurity and a set of rare-earth metal (REM) dopants, namely, Ce, Tb, Er, Sm, and Eu. Photoluminescence (PL) spectra excited by a nitrogen laser with wavelength λ=337 nm at room temperature and 77 K were measured for all compositions and a set of impurities. It was shown that the high-energy PL edge of the pseudoamorphous (a-nc) GaN matrix lies at the same energy as that of the crystalline (epitaxial) c-GaN. As in c-GaN, the Zn acceptor impurity stimulates blue luminescence; however, the PL spectrum is substantially more diffuse, with practically no temperature quenching of the PL present. Indium doping in an amount of 16 at. % results in strong PL with a diffuse peak at 2.1–2.2 eV; the PL of the alloy exhibits temperature quenching as high as a factor of three to four in the interval 77–300 K. The decay time of the PL response increases up to 50 μs. RE impurities enter the amorphous GaN host as trivalent ions and produce narrow-band (except Ce) high-intensity spectra, thus indicating both a high solubility of RE impurities in a-nc-GaN and the generation of an effective crystal field (by the GaN anion sublattice) whose local symmetry makes the intracenter f-f transitions partly allowed. __________ Translated from Fizika Tverdogo Tela, Vol. 45, No. 3, 2003, pp. 395–402. Original Russian Text Copyright ? 2003 by Andreev.     

Fabrication,Microstructure, and Properties of Nanoporous Pd,Ni, and Their Alloys by Dealloying

Nanoporous metals can be fabricated by dealloying, which is one of the reactions that occur during the corrosion of alloys. Nanoporous gold has been widely investigated for several decades, and it has recently been found that other metals, such as platinum, palladium, nickel, and copper, can form nanoporous structures through the dealloying of binary alloys. This article mainly shows fabrication and properties of nanoporous palladium and nickel after introduction of nanoporous metals by referring to nanoporous gold as an example. It is necessary to select binary alloys with suitable elements, in which the dissolution of the less noble element and the aggregation of the nobler element at the solid/electrolyte interface are simultaneously allowed. Postprocessing by thermal or acid treatment alters the nanoporous structure. Various properties of nanoporous metals (including mechanical, catalytic, piezoelectric, hydrogenation, and magnetic ones) are different from those of bulk and nanocrystalline materials and nanoparticles because of their specific three-dimensional network structures consisting of nanosized pores and ligaments. Hydrogenation and magnetic properties are reviewed in terms of lattice strain at curved surfaces. These new metallic nanomaterials are now being investigated from the viewpoint of functional applications, and provide much room for study in various fields.     

Sonochemical synthesis of carbon dots,mechanism, effect of parameters,and catalytic,energy, biomedical and tissue engineering applications

Carbon-based nanomaterials are gaining more and more interest because of their wide range of applications. Carbon dots (CDs) have shown exclusive interest due to unique and novel physicochemical, optical, electrical, and biological properties. Since their discovery, CDs became a promising material for wide range of research applications from energy to biomedical and tissue engineering applications. At same time several new methods have been developed for the synthesis of CDs. Compared to many of these methods, the sonochemical preparation is a green method with advantages such as facile, mild experimental conditions, green energy sources, and feasibility to formulate CDs and doped CDs with controlled physicochemical properties and lower toxicity. In the last five years, the sonochemically synthesized CDs were extensively studied in a wide range of applications. In this review, we discussed the sonochemical assisted synthesis of CDs, doped CDs and their nanocomposites. In addition to the synthetic route, we will discuss the effect of various experimental parameters on the physicochemical properties of CDs; and their applications in different research areas such as bioimaging, drug delivery, catalysis, antibacterial, polymerization, neural tissue engineering, dye absorption, ointments, electronic devices, lithium ion batteries, and supercapacitors. This review concludes with further research directions to be explored for the applications of sonochemical synthesized CDs.     

Density functional theory study of structural,electronic,and thermal properties of Pt,Pd, Rh,Ir, Os and PtPdX(X= Ir,Os, and Rh) alloys

The structural, electronic, mechanical, and thermal properties of Pt, Pd, Rh, Ir, Os metals and their alloys Pt Pd X(X= Ir, Os and Rh) are studied systematically using ab initio density functional theory. The groundstate properties such as lattice constant and bulk modulus are calculated to find the equilibrium atomic position for stable alloys. The electronic band structure and density of states are calculated to study the electronic behavior of metals on making their alloys. The electronic properties substantiate the metallic behavior for all studied materials. The firstprinciples density functional perturbation theory as implemented in quasi-harmonic approximation is used for the calculations of thermal properties.We have calculated the thermal properties such as the Debye temperature, vibrational energy, entropy and constant-volume specific heat. The calculated properties are compared with the previously reported experimental and theoretical data for metals and are found to be in good agreement. Calculated results for alloys could not be compared because there is no data available in the literature with such alloy composition.     

高脂组和正常组兔肝脏组织中Zn,Fe,Cu,Mn,Cr,Pb和Cd含量测定和对比分析

讨论实验性动脉粥样硬化兔肝脏组织中Zn,Fe,Cu,Mn,Cr,Pb和Cd含量的变化.采用高脂饮食复制兔动脉粥样硬化模型,获取肝脏,用HNO3-H2O2混合液微波消解样品,采用原子吸收光谱法测定肝脏组织中Zn,Fe,Cu,Mn,Cr,Pb和Cd的含量.正常组肝脏组织Zn,Fe,Cu,Mn,Cr,Pb和Cd含量分别为137.6,362.3 14.39,9.599 mg·kg-1和159.3,355.0,290.0μg· kg-1,高脂组肝脏组织Zn,Fe,Cu,Mn,Cr,Pb和Cd含量分别为86.09,277.1,11.07,5.366 mg·kg-1和115.2,286.0,210.5 μg·kg-1.高脂兔肝脏Zn,Fe,Cu,Mn,Cr,Pb和Cd含量降低,可能与食物摄取和脂蛋白代谢异常有关.     

Density-functional calculations of alpha, beta, gamma, delta, delta', and epsilon plutonium

Total energies for the six known polymorphs of plutonium metal have been calculated within spin and orbital polarized density-functional theory as a function of lattice constant. Theoretical equilibrium volumes and bulk moduli correspond well with experimental data and the calculated total energies are consistent with the known phase diagram of Pu. It is shown that a preference for the formation of magnetic moments, increasing through the alpha-->beta-->gamma phases, explains their position in the ambient pressure phase diagram and their anomalous variation of atomic density. A simple model is presented that establishes a relationship between atomic density, crystal symmetry, and magnetic moments which is universally valid for all Pu phases.     

Beta-decay energies and masses of short-lived isotopes of rubidium,caesium, francium,and radium

Total decay energies have been measured for a number of neutron-deficient Rb and Cs isotopes, as well as for some neutron-rich isotopes of Fr and Ra. Mass separated sources were produced at the ISOLDE on-line separator at CERN. By applying two differentβ-γ coincidence methods,Q values or their lower limits were determined for^76–78Rb,⁸⁰Rb,^121–124Cs,²²²Fr,^224–226Fr,²²⁹Ra-²²⁹Ac. For many of these nuclei, the atomic mass excesses could be derived, allowing the comparison of masses of far unstable nuclei with predictions from mass formulae. The odd-odd nuclei⁷⁶Rb and⁷⁸Rb appear to be 1?1 1/2 MeV more strongly bound than expected from the systematics.     

Equations of state for copper,silver, gold,aluminum, nickel,and lead

Semiempirical equations of state are obtained for copper, silver, gold, lead, nickel, and aluminum, which permit a study of the mechanical properties of the crystalline lattices of these metals when subjected to a complex system of stresses over the entire elastic deformation region, and lead to an evaluation of the mechanical destruction parameters of these lattices. As an example, the case of omnidirectional tension is examined.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 1, pp. 66–70, January, 1973.     

Simple fundamental equation of state for liquid,gas, and fluid of argon,nitrogen, and carbon dioxide

A new fundamental low-parametric equation of state in the form of reduced Helmholtz function for describing thermodynamic properties of normal substances was obtained using the methods and approaches developed earlier by the authors. It allows us to describe the thermal properties of gas, liquid, and fluid in the range from the density in ideal-gas state to the density at a triple point (except the critical region) with sufficiently high accuracy close to the accuracy of experiment. The caloric properties and sound velocity of argon, nitrogen, and carbon dioxide are calculated without involving any caloric data, except the ideal gas enthalpy. The obtained values of isochoric heat capacity, sound velocity, and other thermodynamic properties are in good agreement with experimental (reliable tabular) data.     

Alpha particle and deuteron impactL-shell ionization of Ar,Cu, Ge,Br, Zr and Ag

Alpha particle and deuteron impactL-subshell ionization cross-sections of Ar, Cu, Ge, Br, Zr and Ag have been computed using Vriens’ expressions for ionization cross-section of atoms due to impact of heavy charged particles. The effects of Coulomb deflection of the projectile and increase in binding of the target electron in the presence of projectile have been incorporated. Hartree-Fock velocity distributions for the target electrons have been used in the present calculations. The simple binary encounter approximation model is found to give results which are in satisfactory agreement with those obtained from experiments and from other theories.     

Heat capacity of rare-earth cuprates,orthovanadates, and aluminum garnets,gallium garnets,and iron garnets

Physics of the Solid State - The correlation between the heat capacities of rare-earth cuprates, orthovanadates, and garnets with ionic radius R 3+ has been analyzed. It has been shown that the...