氢化可的松和表氢化可的松的密度泛函理论研究

采用密度泛函理论B3LYP/6-31G和B3LYP/6-311G*方法优化了氢化可的松和表氢化可的松的几何结构,利用优化的结构得到了氢化可的松和表氢化可的松的原子净电荷、总能量及前沿分子轨道组成.基于简谐振动分析求得了氢化可的松和表氢化可的松的红外光谱频率和强度,由统计热力学分析得到了热力学函数;进而确定了氢化可的松和...     

2,3,7,8-四氯苯并二英分子结构与热力学性质的理论研究

用密度泛函理论(DFT)和从头算(ab initio)方法,在B3LYP/6-31G、 B3LYP/6-31G*、 B3LYP/6-311G*和MP2/6-31G*水平上全优化计算了2,3,7,8-四氯苯并二英(2,3,7,8-TCDD)的几何构型、电子结构和振动频率,并用校正后的频率计算了298～1500 K的标准热力学函数,同时用半经验的PM3 SCF-MO进行了同样的计算,计算结果与实验值及文献值较好地吻合.     

戊烯自由基阳离子的密度泛函理论研究

使用密度泛函理论B3LYP方法和6-31G(d,p)、6-31＋G(d,p)、6-311G(d,p)及6-311＋G(d,p)基组，分别对2-C5H10＋和1-C5H10＋的各种构象进行了几何构型优化，并用B3LYP/6-311G(d,p)进行了频率分析计算.计算预言1-C5H10＋具有非平面构型，与以往报导的从头算计算结论相反.在两个自由基阳离子的各种构象的B3LYP几何构型上，进行了B3LYP和UMP2(full)方法的超精细偶合常数计算，得到了比以往更好的结果.     

一种天然产物Wangzaozin A的细胞毒活性

从总序香茶菜Isodon racemosa (Hemsl) Hara植物中分离得到一个对人类肿瘤细胞Bel-7402和HD-8910具有毒活性的对映-贝壳衫烷型二萜Wangzaozin A化合物(1). 应用密度泛函理论(DFT)B3LYP方法, 对该分子的几何构型进行优化, 结果表明用B3LYP/6-31G(d)优化的几何参数与它的X射线衍射结构参数基本一致. 在优化的几何构型基础上, 采用规范不变原子轨道(GIAO)法, 在B3LYP理论水平分别用6-31G(d), 6-31G(d,p), 6-31+G(d,p)和6-31++G(d,p)基组进行核磁共振(NMR)化学位移值计算, 预测的1H和13CNMR化学位移值与实验值吻合; 统计误差分析表明, 用B3LYP/6-31G(d)优化的分子构型接近实际的分子构型. 因此, DFT方法适用这一类型化合物的构型和NMR参数进行预测. 在几何优化的基础上, 在B3LYP/6-31G(d)水平上, 对Wangzaozin A分子的静电位(MEP)进行理论计算. MEP三维图表明, 在Wangzaozin A分子中α-亚甲基环戊酮的羰基和羟基附近出现富电子区域(负电位), 起着供电子作用, 与受体的正电子区域结合. 这些结果从理论上支持了α-亚甲基环戊酮结构是一种抗肿瘤活性中心的看法.     

去氢抗坏血酸分子振动光谱的理论研究

采用RHF, MP2, DFT(B3LYP)方法, 以6-311++G**为基组研究了去氢抗坏血酸分子(DHA)的平衡几何构型和振动光谱. 计算结果表明, 采用RHF, B3LYP以及MP2 方法优化得到的几何结构以及频率值是一致的. 采用B3LYP/6-311++G**计算了DHA分子平衡构型下的谐振动力场﹑振动频率和振动强度. 使用Wilson的GF矩阵方法对DHA分子进行了简正坐标分析, 依据所得的势能分布对DHA分子的振动基频进行了合理的理论归属.     

A3型Corrole中位取代基对其β位1H-NMR的影响

采用密度泛函(DFT)方法对八个中位有不同取代基的A3型corrole进行了几何结构优化和核磁共振(NMR)理论计算. 几何优化结果显示5,10,15-三苯基corrole的两个环内NH异构体的中位苯环空间排布方向不同. 此外, 虽然A3型corrole两个环内NH异构体A和B的能量相差不大, 但A和B分子的Boltzman分布概率却有较大的不同, 且受取代基影响很大. 因而在计算NMR时必须对A和B异构体的理论化学位移做Boltzman统计平均处理. NMR计算结果表明, 在B3LYP/6-311+G(2d,p)//B3LYP/6-31G(d,p)水平下可以得到较为合理的corrole的1H-NMR化学位移结果. β-位氢的化学位移与取代基Hammett常数σ+P的大小成正比关系. 此外, 由于corrole大环的低对称性, 取代基对不同位置β-位氢的NMR影响程度不同, 其β-位氢化学位移的大小和顺序与中位取代基的电子效应和corrole的立体结构因素有关.     

线型碳链PC2nP的结构和电子光谱的密度泛函理论研究

应用密度泛函理论,在B3LYP/6-31G**和B3LYP/6-311G**水平上优化得到了线型簇合物PC2nP(n=1-10)的基态平衡几何构型,计算了它们的谐振动频率.在基态平衡构型下,利用含时密度泛函理论,计算得到了簇合物PC2nP(n=1-10)的垂直激发能和相应的振子强度,导出了激发能与体系大小n的解析关系式.     

阿魏酸分子结构和振动光谱的理论研究

阿魏酸是一种有效的天然油脂抗氧化剂.采用密度泛函理论(DFT) B3LYP方法和从头算HF两种方法,在6-311++G**基组水平上对阿魏酸分子的几何结构进行全优化,得到其几何结构参数,进一步计算得到阿魏酸的红外和拉曼振动光谱.计算结果表明,采用B3LYP和HF 2种方法优化得到的几何结构及频率值是一致的,对在B3LYP方法下计算得到的红外和拉曼振动频率进行合理的理论归属并与SDBS数据库实验数据进行比较,发现计算得到的红外和拉曼振动频率与实验测定结果符合较好.阿魏酸分子结构和振动光谱的研究,为研究阿魏酸及其衍生物的化学结构与生理活性之间的构效关系提供依据.     

D-苯丙氨酸与Cu＋(1S0, 3d10)气相反应理论研究

用量子化学密度泛函(DFT)方法研究D-苯丙氨酸与一价基态金属阳离子Cu^＋在气相中反应的机理. 在B3LYP/6-31G*水平上, 优化了反应包含的4个反应通道的反应物、中间体、过渡态和产物的几何构型, 并采用B3LYP/DZVP, B3LYP/[6-311＋G**(C,H,O)＋Lanl2dz(Cu)], B3LYP/6-311＋G**, MP2/6-311＋G** 等方法对各驻点进行了单点能计算. 通过对计算结果的分析, 获得了其单重态反应势能面的一般轮廓、各驻点几何构型优化参数, 明确了其反应机理.     

并三噻吩及其三种衍生物电子光谱的密度泛函理论研究

采用B3LYP/6-31G(d,p)方法优化得到了并三噻吩(DTT)及其三种衍生物苯基并三噻吩(PDTT)、萘基并三噻吩(TDTT)和噻吩基并三噻吩(NDTT)基态(S0)的稳定几何构型,并通过频率分析加以验证.在TD-B3LYP/cc-pVTZ水平下,计算了它们的电子吸收光谱,计算值与实验值符合得很好.计算结果表明:它们的吸收波长顺序为λNDTTλTDTTλPDTTλDTT.采用TD-B3LYP/6-31G(d,p)方法,优化得到了TDTT和NDTT第一激发态(S1)的几何结构,并在TD-B3LYP/cc-pVTZ水平下计算了它们的发射光谱.     

Experimental (FT-IR and FT-Raman), electronic structure and DFT studies on 1-methoxynaphthalene

In this work, FT-IR and FT-Raman spectra of 1-methoxynapthalene (C(11)H(10)O) have been reported in the regions 4000-400 cm(-1) and 3500-100 cm(-1), respectively. Density functional method (DFT) has been used to calculate the optimized geometrical parameters, atomic charges, vibrational wavenumbers and intensity of the vibrational bands. The vibrational frequencies have been calculated and scaled values are compared with experimental FT-IR and FT-Raman spectra. The structure optimizations and normal coordinate force field calculations are based on density functional theory (DFT) method with B3LYP/3-21G, B3LYP/6-31G, B3LYP/6-31G(d,p) and B3LYP/6-311++G(d,p) basis sets. The complete vibrational assignments of wavenumbers are made on the basis of potential energy distribution (PED). The optimized geometric parameters are compared with experimental values of naphthoic acid. The results of the calculation shows excellent agreement between experimental and calculated frequencies in B3LYP/6-311++G(d,p) basis set. The effects due to the substitutions of methyl group and carbon-oxygen bond are also investigated. A study on the electronic properties, such as excitation energies and wavelengths, were performed by time-dependent DFT (TD-DFT) approach. HOMO and LUMO energies are calculated that these energies show charge transfer occurs within the molecule.     

Characterization of pentacarbonyl(4-methylpyridine)chromium(0) complex using density functional theory (DFT) and Hartree-Fock (HF) computational methods

The optimized molecular structure, atomic charges, vibrational frequencies, thermodynamic properties, nuclear magnetic resonance (NMR) and ultraviolet-visible (UV-Vis) spectral data of pentacarbonyl(4-methylpyridine)chromium(0) complex have been investigated by performing ab initio Hartree-Fock (HF) and density functional theory, B3LYP, B3PW91 and BE1PBE methods with 6-311G, 6-311+G(3d,3p) and 6-31G(d,p) basis set. The calculated NMR data at 6-311G basis set, vibrational frequencies at 6-311+G(3d,3p) basis set and the optimized geometric bond lengths and bond angles at 6-31G(d,p) basis set are in good agreement with the corresponding experimental values. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) have been simulated. In addition, the transition state and energy band gap and infrared intensities have also been reported.     

NMR spectra, GIAO and charge density calculations of five-membered aromatic heterocycles

The B3LYP/6-31+G(d) molecular geometry optimized structures of 17 five-membered heterocycles were employed together with the gauge including atomic orbitals (GIAO) density functional theory (DFT) method at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p) and B3LYP/6-311+G(2d,p) levels of theory for the calculation of proton and carbon chemicals shifts and coupling constants. The method of geometry optimization for pyrrole (1), N-methylpyrrole (2) and thiophene (7) using the larger 6-311++G(d,p) basis sets at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,p) and B3LYP/cc-pVTZ levels of theory gave little difference between calculated and experimental values of coupling constants. In general, the (1)H and 13C chemical shifts for all compounds are in good agreement with theoretical calculations using the smaller 6-31 basis set. The values of nJHH(n=3, 4, 5) and rmnJ(CH)(n=1, 2, 3, 4) were predicted well using the larger 6-31+G(d,p) and 6-311++G(d,p) basis sets and at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,2p) levels of theory. The computed atomic charges [Mülliken; Natural Bond Orbital Analysis (NBO); Merz-Kollman (MK); CHELP and CHELPG] for the B3LYP/6-311++G(d,p) geometry optimized structures of 1-17 were used to explore correlations with the experimental proton and carbon chemical shifts.     

Synthesis,Crystal Structure and Theoretical Calculations of N-Benzyl-1-(5-(3-chlorophenyl)-1,3,4-oxadiazol-2-yl)cyclopentanamine

N-benzyl-1-(5-(3-chlorophenyl)-1,3,4-oxadiazol-2-yl)cyclopentanamine was synthesized via one-pot reaction of appropriate benzylamine, cyclopentanone,(N-isocyanimino)triphenylphosphorane and m-chlorobenzoic acid. The quantum theoretical calculations for crystal structure were performed by density functional theory(DFT/B3LYP/6-311+G*). From the optimized structure, geometric parameters were obtained and experimental measurements were compared with the calculated data. Frontier molecular orbitals(FMOs), total density of states(DOS), molecular electrostatic potential(MEP), molecular properties, natural charges, NMR parameters and NBO analysis for the product were investigated by theoretical calculations.     

An efficient method for calculating atomic charges of peptides and proteins from electronic populations

An efficient method is presented to calculate atomic charges of peptides and proteins derived from Mulliken electronic populations for terminally blocked amino acids (Ac-X-NHMe, X = any neutral or charged residue) calculated at the B3LYP/6-31G(d,p)//HF/6-31G(d,p) level of theory. This electronic population-derived atomic charges (EPAC) method is based on the geometry-dependent atomic charge (GDAC) method proposed by Cho et al. (J. Phys. Chem. B 2001, 105, 3624), in which atomic charges are calculated by using the partial equalization of atomic electronegativities with electronegativity parameters and damping factors given by interatomic distances between covalently bonded atoms in a molecule. The overall mean absolute difference (mad) and root-mean-square deviation (rmsd) between dipole moments micro(EPAC) and micro(B3LYP), obtained from EPAC charges and from B3LYP/6-31G(d,p) level calculations, respectively, for Ac-X-NHMe are estimated to be 0.38 and 0.59 D, respectively, for 26 representative conformations in the training set, and 0.54 and 0.79 D, respectively, for 172 representative conformations not used for parametrization. For Ac-(Ala)(n)-NHMe (n = 2-6), the EPAC method reasonably predicts the increase of the dipole moment with increase of the chain length, although the deviations from the micro(B3LYP) values are somewhat larger. For Ac-Ala-NHMe and Ac-(Ala)(3)-NHMe, the EPAC charge for a specific type of atom does not depend on its position in the sequence or on the length of the sequence. In addition, charge neutrality holds for any Ala residue of these two peptides. Thus, these results suggest that the EPAC charges derived from B3LYP/6-31G(d,p) Mulliken populations can be used reliably for conformational analysis of peptides and proteins.     

具有D~6~h对称性的C~3~6及其衍生物电子结构的密度泛函研究

运用密度泛函方法,比较不同水平的基组(HF/6-311+G^*;B3LYP/6-31G^*;B3LYP/6-311+G^*)对具有D~6~h对称性的C~3~6分子进行构型优化的结果,并分析其几何结构、电子结构、稳定性等性质;采用基组B3LYP/6-31G^*对H@C~3~6,Li@C~3~6,Na@C~3~6,K@C~3~6分子进行构型全优化,分析了不同内嵌原子对其几何结构、电子结构、稳定性等性质的影响;首次在B3LYP/6-311+G^*水平上,对C~3~6H~6,C~3~6H~1~2,X@C~3~6(X=H,Li,Na,K)几何构型及电子结构进行研究并得到其稳定性规律。     

邻氧乙酸苯甲醛缩水杨酰腙及其配合物结构的量子化学研究和生物活性分析

利用Gaussian03W在B3LYP/3-21G水平上对邻氧乙酸苯甲醛缩水杨酰腙(H2L)及其过渡金属[Cu(Ⅱ)、Zn(Ⅱ)、Ni(Ⅱ)]配合物ML进行了量子化学计算,得到了优化构型、分子轨道能量和原子净电荷分布,并从自然原子电荷、前沿轨道能量着手分析了化合物的结构特征与生物活性.     

Post Hartree–Fock and density functional theory studies on Di-Protonated Allopurinol

Post Hartree–Fock and density functional theory (DFT) methods have been employed to study the molecular properties of Di-Protonated Allopurinol²⁺ tautomers in gaseous and aqueous phase environments. The tautomers in gaseous phase have been optimized at MP2/6-311G(2d,2p) and B3LYP/6-311G(2d,2p) levels of theory. The self-consistent reaction field theory (SCRF) has been employed to optimize the tautomers in aqueous phase (ε = 78.5) at B3LYP/6-311G(2d,2p) level of theory and the solvent effect has been studied. The structure, energetics and relative stabilities of the tautomers have been analyzed both in gaseous and aqueous phases. The principle of maximum hardness (MHP) has been tested at B3LYP/6-311G(2d,2p) level of theory. The condensed Fukui functions have been calculated using the atomic charges obtained through Natural population analysis to identify the relative change in the most reactive site of the optimized structures. NMR studies have been carried out, on the basis of Cheeseman coworker’s method, to analyze the molecular environment as well as the delocalization activities of electron clouds.