介质柱型二维Triangular格子光子晶体的禁带特性

采用平面波展开法数值计算了空气背景中由圆形、正六边形和正方形介质柱构造的二维三角晶格光子晶体禁带结构,并研究了介质方柱旋转角度、介质折射率和填充比对完全光子禁带宽度的影响.结果表明,在低频区,介质方柱旋转17°时,出现最大完全光子禁带,且最大禁带宽度随介质折射率的变化较为稳定.在高频区,介质方柱旋转30°时,完全光子禁带宽度最大;且介质材料折射率n=2.2时即出现完全光子禁带,n=2.6时,完全光子禁带达到最大.     

二维正方晶格光子晶体禁带特性

基于平面波展开法,以碳化硅构成二维正方晶格光子晶体,数值模拟了TE模、TM模二维光子晶体的禁带特性,结果表明,TE模更容易形成光子禁带。同时设计了以碳化硅构成二维正方晶格光子晶体波导,数值模拟了TE模、TM模波导的传输特性和禁带特性,结果表明,TE模构成的波导电磁波能够较好的传播,它们的光子禁带都没有出现。研究结论为光子晶体波导器件的开发提供参考。     

二维圆柱形光子晶体的完全禁带研究

用平面波展开法研究了二维圆柱形光子晶体的完全禁带与填充比、介电常数比之间的关系. 研究发现,并非介电常数比越大,完全禁带宽度就越大,而是有一个峰值. 关键词： 二维光子晶体 完全禁带 平面波展开法     

二维Kagome格子光子晶体禁带的数值模拟

采用平面波展开法模拟计算了由空气背景中的介质柱构成的二维Kagome格子光子晶体的能带结构,得到了使完全光子禁带最大化的结构参量.计算结果表明:由圆形、正六边形和正四边形三种不同形状锗介质柱构成的Kagome格子光子晶体都出现了完全光子禁带,最大禁带分别为Δ=0.014(ωa/2πc)、Δ=0.013(ωa/2πc)、Δ=0.011(ωa/2πc)发现由圆形和正六边形两种介质柱构成的Kagome格子光子晶体在填充比连续变化的较大的范围内都有宽度较为稳定的完全禁带,且它们具有非常相似的能带结构.     

等效介质理论在光子晶体平面波展开分析方法中的应用

应用等效介质理论,提出了一种理论分析光子晶体的新平面波展开法,通过计算光子晶体的能带作收敛性分析,结果表明,新方法具有精度高、收敛快的优点,明显优于目前通用的二种平面波展开法;与已有的理论方法相比,新平面波展开法更适用于分析任意介电分布的高维光子晶体结构 关键词： 光子晶体 平面波展开法 禁带     

六角格子光子晶体带隙特性

应用平面波展开法研究光子晶体的带隙特性,数值模拟空气圆柱半径与晶格常数的比值变化时,TE模和TM模禁带特性,得出六角晶格光子晶体具有较大的TE模和TM模光子禁带带隙,并且具有较高的带隙宽度重合范围。结果为光子晶体器件的制作提供理论依据。     

用于短波段发光二极管的二维光子晶体禁带研究

运用平面波展开法(PWE),针对光子晶体在短波长段发光二极管(LED)领域上的应用,主要选择高频禁带模式,研究了4种具有较大应用潜力的二维光子晶体结构,包括正方空气柱结构、三角空气柱结构、正方介质柱结构和三角介质柱结构。在不同晶格常数、占空比(AFF)、柱半径和晶格常数比下,分析了TE模式和TM模式光子禁带的变化。数据分析表明,光子禁带中心波长随AFF增加而变小。相比于其他结构,正方介质柱结构更适于短波段光子晶体LED来提高其出光效率,三角介质柱结构和三角空气柱结构适合用于构造短波段偏振光LED。     

窄禁带光子晶体能态密度的研究

利用平面波展开法研究了窄禁带光子晶体材料的能态密度分布情况,得到了窄禁带材料构成的三角晶格光子晶体能态密度随着介电常数差值的增大而增大,并且分析了氮化镓在f=0.3时,能态密度分布最小,出现最大光子带隙。研究结果为窄禁带光子晶体器件的构造提供理论依据。     

低频和高频区域内大禁带的二维各向异性光子晶体

采用一种改进的平面波展开法,运用一种有效的设计二维各向异性光子晶体的方法,在低频和高频区域内获得了具有较大禁带的两种二维光子晶体.低频区域内,找到具有最大禁带宽度的光子晶体的禁带宽度为Δω=0076(2πca),中心频率为0769(2πca)(这里的a为晶格常量).高频区域内,找到的光子晶体的最大禁带宽度为Δω=01(2πcα),中心频率为1653(2πca).同时在低频区域内,发现一种很简单的正方网格结构,它的禁带宽度为Δω=00574(2πca),禁带宽度与禁带的中心频率之比为Δωωc=11782%. 关键词： 光子晶体 平面波展开法 各向异性材料 完全禁带     

光子晶体液体浓度传感器

为了有效地检测混合液体的浓度,运用平面波展开法与光子晶体禁带理论,研究了光子晶体禁带宽度和混合液体浓度的对应关系。以砷化镓(GaAs)为背景材料的三角格子空气孔二维光子晶体内分别填充不同浓度的水醋酸、水甲醇混合液体,讨论了混合液体浓度与介电常数对二维光子晶体禁带宽度的影响。模拟结果表明,在温度保持不变的情况下,浓度在0～0.60mol/kg之间变化时二维光子晶体TE模没出现光子晶体禁带而TM模出现的光子晶体禁带宽度随着混合液体浓度和介电常数的增大而逐渐变窄且向高频区域移动。这一结果为生物化学中混合液体浓度的检测方面提供很好的参考依据。     

空气环型二维光子晶体完全带隙特性研究

采用平面波展开法, 系统研究了空气环型二维光子晶体的完全光子带隙随结构参数变化而改变的规律, 并将其与普通的空气孔型和介质柱型二维光子晶体的完全带隙进行了比较. 研究表明: 空气环型二维光子晶体不仅可以获得更宽的完全带隙, 而且, 当介质折射率较低时, 其可以获得普通空气孔型和介质柱型二维光子晶体在低折射率条件下所无法获得的完全带隙. 关键词： 空气环型二维光子晶体 完全带隙 平面波展开法     

Photonic band structures of two-dimensional photonic crystals with deformed lattices

Using the plane-wave expansion method, we have calculated and analysed the changes of photonic band structures arising from two kinds of deformed lattices, including the stretching and shrinking of lattices. The square lattice with square air holes and the triangular lattice with circular air holes are both studied. Calculated results show that the change of lattice size in some special ranges can enlarge the band gap, which depends strongly on the filling factor of air holes in photonic crystals; and besides, the asymmetric band edges will appear with the broken symmetry of lattices.     

Absolute photonic band gaps of two-dimensional square-lattice photonic crystals with Taiji-shaped dielectric rods

A novel structure of two-dimensional (2D) square-lattice photonic crystal (SLPC) composed of Taiji-shaped dielectric rods imbedded in air is constructed and the properties of absolute photonic band gap (PBG) are theoretically analyzed in both the number and width by Plane Wave Expansion Method (PWM). By comparing the absolute PBGs in 2D SLPCs consisting of four shapes of rods with different symmetries (circle, button, semicircle and Taiji) at the same filling ratio, we find that both the number and width of absolute PBG significantly increase with the breaking of scatterer's symmetry, and the Taiji-shaped rods with the poorest symmetry can attain both the most number and the largest width of absolute PBGs. Additionally, we also study the influence of dielectric constant ε and three geometric parameters of Taiji-shaped scatterer on the absolute PBG and discover that the SLPC with Taiji-shaped rods can generate at most nine absolute PBGs and the largest absolute PBG with the width 0.0485 (ωa/2πc).     

Photonic band gaps structure properties of two-dimensional function photonic crystals

The tunable two-dimensional photonic crystals band gap, absolute photonic band gap and semi-Dirac point are beneficial to designing the novel optical devices. In this paper, tunable photonic band gaps structure was realized by a new type two-dimensional function photonic crystals, which dielectric constants of medium columns are functions of space coordinates. However for the two-dimensional conventional photonic crystals the dielectric constant does not change with space coordinates. As the parameter adjustment, we found that the photonic band gaps structures are dielectric constant function coefficient, medium columns radius, dielectric constant function form period number and pump light intensity dependent, namely, the photonic band gaps position and width can be tuned. we also obtained absolute photonic band gaps and semi-Dirac point in the photonic band gaps structures of two-dimensional function photonic crystals. These results provide an important theoretical foundation for design novel optical devices.     

Modelling and design of complete photonic band gaps in two-dimensional photonic crystals

In this paper, we investigate the existence and variation of complete photonic band gap size with the introduction of asymmetry in the constituent dielectric rods with honeycomb lattices in two-dimensional photonic crystals (PhC) using the plane-wave expansion (PWE) method. Two examples, one consisting of elliptical rods and the other comprising of rectangular rods in honeycomb lattices are considered with a view to estimate the design parameters for maximizing the complete photonic band gap. Further, it has been shown that complete photonic band gap size changes with the variation in the orientation angle of the constituent dielectric rods.      

Photonic band gap engineering in 2D photonic crystals

The polarization-dependent photonic band gaps (TM and TE polarizations) in two-dimensional photonic crystals with square lattices composed of air holes in dielectric and vice versa i.e., dielectric rods in air, using the plane-wave expansion method are investigated. We then study, how the photonic band gap size is affected by the changing ellipticity of the constituent air holes/dielectric rods. It is observed that the size of the photonic band gap changes with changing ellipticity of the constituent air holes/dielectric rods. Further, it is reported, how the photonic band gap size is affected by the change in the orientation of the constituent elliptical air holes/dielectric rods in 2D photonic crystals.     

基于空气环结构的大带隙二维光子晶体的设计

用平面波展开法研究了内介质柱截面为长方形的三角晶格空气环型光子晶体的完全带隙特性。通过调节内介质柱的大小、介电常数、旋转角度以及空气环外半径对完全带隙的影响,找到了一组可以获得大带隙二维光子晶体结构的最佳参数。经优化后得到禁带宽度Δω=0.082(2πca-1)(其中a为晶格常数,c为光速),中心频率ω0=0.401(2πca-1),完全带隙宽度与中心频率的比值达到了20.4%,该结果比圆形内介质柱截面空气环结构的完全带隙大,比普通的空气孔结构的完全带隙增大了37%。     

中红外波段硅基两维光子晶体的光子带隙

利用电化学腐蚀的方法制备了大多孔硅两维光子晶体.结构图形对称性为正方格子，其结构参数为正方形晶格周期a=44μm，正方形空气柱的边长l=2μm.并用显微红外光谱仪表征了光谱性质，揭示了所制备两维光子晶体样品的中红外波段光子的反射特性. 关键词： 光子晶体 光子带隙 反射谱 时域有限差分法     

晶格中心插入体的对称性及取向对二维声子晶体带隙的影响

以二维钢/气体系声子晶体为模型,采用平面波法研究了圆柱正方及六角晶格中心添加插入体的对称性及取向与带隙的关系,给出了四方、六方、八方及圆柱插入体结构的带隙分布图及带隙随柱体取向的变化关系图.发现在低填充率条件下,插入体的截面形状与晶格类型相同时最有利于能带简并态的分离而获得带隙,但填充率较高时,采用高对称性的插入体可以获得最宽的带隙.正方晶格中心插入体取向对带隙的影响要比在六角晶格中更为显著.对四方柱正方晶格声子晶体的研究表明,仅旋转原柱体要比在其中心插入柱体后旋转更容易获得低频宽带隙,单独运用添加柱体或旋转非圆柱体来降低晶格对称性以获取低频带隙的方法要比同时使用两种方法效果更好.此外,从机理上对计算结果进行了解释.