锐钛矿型TiO2(101)面本征点缺陷的理论研究

采用平面波超软赝势方法计算了锐钛矿型TiO₂(101)面存在本征空位和间隙点缺陷的几何结构以及缺陷形成能.首先分析了点缺陷对表面结构的影响,发现不同类型缺陷导致缺陷周围原子有不同的位移趋势：O空位的产生导致空位周围的Ti原子向空位外移动,Ti₁和Ti₂空位的产生均使O₁自发地与周围的O原子团聚,O_i原子易被周围的氧原子吸附而成键,而Ti_i2缺陷几乎 关键词： 第一性原理 2')" href="#">TiO₂ 点缺陷 表面结构     

磁性形状记忆合金Mn2NiGa band Jahn-Teller效应的第一性原理研究

运用第一性原理的方法,研究了磁性形状记忆合金Mn₂NiGa在马氏体相变中晶格结构、磁结构、Mn原子d电子结构的变化.研究表明,伴随Mn₂NiGa马氏体相变的发生,形成了一个由两根长键及四根短键组成的拉长八面体结构,即产生了沿z轴拉长的Jahn-Teller畸变;在相变时,位于八面体中心的Mn原子的磁矩发生显著的变化,而作为配体的Ni、Ga原子的磁矩变化很微小;Jahn-Teller畸变的发生,是由于晶体的畸变使配住场产生变化,导致Mn原子d电子态密度重新分布,从而使e_g和t_2g能级分裂所致.     

含空位二维六角氮化硼电子和磁性质的密度泛函研究

基于密度泛函理论的第一性原理计算, 研究了含B原子空位(V_B), N原子空位(V_N), 以及含B–N键空位 (V_B+N)缺陷的二维氮化硼(h-BN)的电子和磁性质. 在微观结构上, V_B体系表现为在空位附近的N原子重构成等腰三角形, V_N体系靠近空穴的B 原子形成等边三角形, V_B+N体系靠近空穴处的B和N原子在h-BN平面上重构为梯形. 三种空位缺陷都使h-BN的带隙类型从直接带隙转变为间接带隙. V_B体系的总磁矩为1.0 μ_B, 磁矩全部由N原子贡献. 其中空穴周围的三个N原子磁矩方向不完全一致, 存在着铁磁性和反铁磁性两种耦合方式. 对于V_N 体系, 整个晶胞内的总磁矩也为1.0 μ_B, 磁矩在空穴周围区域呈现一定的分布. 关键词： 二维h-BN 空位 电子结构 磁性     

Ni4Ti3沉淀相对NiTi形状记忆合金相变行为的影响

采用第二近邻修正型嵌入原子势的分子动力学方法,建立了共格沉淀相与半共格沉淀相块状/柱状模型,模拟了温度诱发相变和应力诱发相变,分析了Ni₄Ti₃沉淀相对Ni Ti形状记忆合金相变行为的影响．结果表明,Ni₄Ti₃沉淀相本征应变诱发的弹性应力场对相变中马氏体变体类型、形核位置、分布等有重要影响.在温度诱发相变时,共格沉淀相促进部分马氏体变体的形核生长,能显著提高Ni Ti超弹性形状记忆合金的马氏体相变开始温度;在应力诱发相变时,Ni₄Ti₃沉淀相使马氏体早于无沉淀相区域形核,导致了相变应力降低、抑制了马氏体解孪,减小了应力-应变曲线的滞回环.     

锐钛矿型TiO2(101)面本征点缺陷的理论研究

采用平面波超软赝势方法计算了锐钛矿型TiO2(101)面存在本征空位和间隙点缺陷的几何结构以及缺陷形成能.首先分析了点缺陷对表面结构的影响,发现不同类型缺陷导致缺陷周围原子有不同的位移趋势:O空位的产生导致空位周围的Ti原子向空位外移动,Ti1.和Ti2空位的产生均使OI自发地与周围的O原子团聚,OI原子易被周围的氧原子吸附而成键,而Ti2缺陷几乎对晶格结构没有产生影响.对TiO2(101)面上可能出现的几种点缺陷的形成能进行了计算,结果表明:在还原性气氛下,虽然Tii2和VOI缺陷均容易出现,但Tii2缺陷的形成能比VOI缺陷更低;而在氧化性气氛下,表面的OI和VTil缺陷较容易出现.最后,为了比较各种缺陷结构的稳定性,还计算了几种典型表面缺陷的形成焓.     

哈斯勒合金Ni45Co5Mn37In13的磁场诱导马氏体相变和反磁热效应研究

通过结构和磁性测量,对Ni45Co5Mn37In13多晶样品的马氏体相变性质进行了系统研究,发现Co原子的间隙掺杂能够提高三元合金奥氏体相与马氏体相之间的磁化强度差异(ΔM).以此为基础,结合基本热力学理论,总结了计算驱动完整马氏体相变所对应临界磁场在热力学上的一般表达式,并结合Ni45Co5Mn37In13的实验结果对该表达式进行了基本讨论,充分证明了磁场诱导马氏体相变不仅与该类合金两相之间的ΔM有关,而且还依赖于合金在相变过程的温度跨度与热滞后.此外,计算了Ni45Co5Mn37In13合金在磁场诱导马氏体相变过程中的反磁热效应.结果表明,该合金的饱和等温熵变约为27J/kg K.而且保持在一个非常宽的温度跨度内,以至于样品在50kOe磁场改变下的磁制冷量已经达到了约340J/kg.     

铁磁形状记忆合金Mn2NiGa中应力诱发马氏体相的结构和磁性

采用金刚石对顶砧高压装置（DAC）和同步辐射X射线光源法,对Heusler类型的磁性形状记忆合金Mn₂NiGa的结构进行了原位高压X射线衍射测量,并对卸载后的受压样品进行了磁测量.实验观察到材料在室温下分别在0.77 GPa和20 GPa压力下发生了两次不可逆结构相变：马氏体相变和两种不同马氏体间的等结构相变.同时加压使马氏体结构中产生了大量的缺陷,造成了严重的晶格畸变,致使马氏体结构的矫顽力提高了近10倍,达到204 kA/m.结果发现,加压处理造成样品马氏体相饱和磁化强度的大幅度 关键词： 铁磁形状记忆合金 2NiGa')" href="#">Mn₂NiGa 高压 同步辐射     

Heusler合金Mn2NiGe马氏体相变的带Jahn-Teller效应研究

运用第一性原理的方法,计算磁性形状记忆合金Mn₂NiGe的晶体结构、磁结构、电子结构在马氏体相变中的变化.结果表明:Mn₂NiGe在发生马氏体相变时,产生了c轴拉长而a和b轴缩短的Jahn-Teller畸变,形成一个由两根长键和四根短键组成的拉长的八面体;伴随Jahn-Teller畸变,处于八面体中心的Mn离子的磁矩发生了显著的变化,而作为配体的Ni和Ge离子的磁矩基本不变;Jahn-Teller效应中Mn离子的e_g和t_2g能级的分裂,源自于晶体畸变所产生的配位场的改变,导致Mn离子d电子态密度的重新分布,从而在费米能级两侧打开一个赝能隙.     

内应力对Mn2NiGa铁磁形状记忆合金的结构、相变和磁性能的影响

通过施加压应力的方法,在铁磁形状记忆合金Mn₂NiGa中引入残留内应力,研究了内应力对 Mn₂NiGa材料的结构、相变和磁性能的影响.研究发现,加压过程使材料发生了塑性形变,在材料内部引入了大量的位错缺陷.卸载后保留的位错缺陷在材料中造成了残留的内应力,导致了马氏体相变温度大幅度提高, 使原本室温下的母相转变成了马氏体相.测量到导致样品转变成马氏体的阈值压应力为1.0 GPa.加压形成的马氏体中的残留内应力将矫顽力从低于50 Oe提高到350 Oe.残留内应力在730 K的热处理中由于位错缺陷的消失而得以消除,样品实现了马氏体逆相变.如此高的逆相变温度使得 Mn₂NiGa马氏体的居里温度测量成为可能,获得了530K的数值.     

铁磁形状记忆合金Mn2NiGa中应力诱发马氏体相的结构和磁性

采用金刚石对顶砧高压装置(DAC)和同步辐射X射线光源法,对Heusler类型的磁性形状记忆合金Mn2NiGa的结构进行了原位高压X射线衍射测量,并对卸载后的受压样品进行了磁测量.实验观察到材料在室温下分别在0.77 GPa和20 GPa压力下发生了两次不可逆结构相变:马氏体相变和两种不同马氏体间的等结构相变.同时加压使马氏体结构中产生了大量的缺陷,造成了严重的晶格畸变,致使马氏体结构的矫顽力提高了近10倍,达到204 kA/m.结果发现,加压处理造成样品马氏体相饱和磁化强度的大幅度降低,显示出明显的缺陷效应.     

Fracture mechanism of a Ni–Mn–Ga ferromagnetic shape memory alloy single crystal

Ni–Mn–Ga ferromagnetic shape memory alloys (FSMAs) have shown large magnetic-field-induced strains up to 10%. The fracture behavior of these materials under thermal and magnetic cycling has not been reported so far. An Ni–Mn–Ga single crystal exhibiting both thermal and magnetic shape memory effect was investigated in the present study. Coexistence of differently oriented martensite twinned variants and its effect on the magnetization and fracture mechanism were studied. Fracture behavior of this alloy was found to be strongly related to the martensitic transformation while the fracture surface was parallel to one of the {1 1 2} martensite twin planes. Different orientations of martensite variants were responsible for the formation of the crack network leading to fracture.     

Transformation behavior of Ni-Mn-Ga in the low-temperature limit

The magnetic, magnetocaloric and thermal characteristics have been studied in a Ni(50.3)Mn(20.8)Ga(27.6)V(1.3) ferromagnetic shape memory alloy (FSMA) transforming martensitically at around 40?K. The alloy shows first a transformation from austenite to an intermediate phase and then a partial transformation to an orthorhombic martensite, all the phases being ferromagnetically ordered. The thermomagnetization dependences enabled observation of the magnetocaloric effect in the vicinity of the martensitic transformation (MT). The Debye temperature and the density of states at the Fermi level are equal to θ(D)?=?(276?±?4)?K and 1.3?states/atom?eV , respectively, and scarcely dependent on the magnetic field. The MT exhibited by Ni-Mn-Ga FSMAs at very low temperatures is distinctive in the sense that it is accompanied by a hardly detectable entropy change as a sign of a small driving force. The enhanced stability of the cubic phase and the low driving force of the MT stem from the reduced density of states near the Fermi level.     

Increasing magnetoplasticity in polycrystalline Ni-Mn-Ga by reducing internal constraints through porosity

Foams with 55% and 76% open porosity were produced from a Ni-Mn-Ga magnetic shape-memory alloy by replication casting. These polycrystalline martensitic foams display a fully reversible magnetic-field-induced strain of up to 0.115% without bias stress, which is about 50 times larger than nonporous, fine-grained Ni-Mn-Ga. This very large improvement is attributed to the bamboolike structure of grains in the foam struts which, due to reduced internal constraints, deform by magnetic-field-induced twinning more easily than equiaxed grains in nonporous Ni-Mn-Ga.     

Effect of Fe substitution on the phase stability and magnetic properties of Mn-rich Ni-Mn-Ga ferromagnetic shape memory alloys

The influence of Fe additions on the martensitic transformation and magnetic properties of Mn-rich Ni-Mn-Ga alloys was investigated by substituting either 1 at% Fe for each atomic species or by substituting Ni with varying amounts of Fe. The magnetic structure of the alloys was studied using ⁵⁷Fe Mössbauer spectroscopy. Mössbauer spectra revealed typical paramagnetic features in Mn-rich Ni-Mn-Ga-Fe alloys owing to the preferential site occupancy of Fe atoms at Ni sites. The evolution of the magnetic properties and phase stability has been correlated with the chemical and atomic ordering in these alloys.     

Magnetic entropy change involving martensitic transition in NiMn-based Heusler alloys

Our recent progress on magnetic entropy change (ΔS) involving martensitic transition in both conventional and metamagnetic NiMn-based Heusler alloys is reviewed. For the conventional alloys, where both martensite and austenite exhibit ferromagnetic (FM) behavior but show differentmagnetic anisotropies, a positive ΔS as large as 4.1 J·kg^-1·K^-1 under a field change of 0–0.9 T was first observed at martensitic transition temperature T_M ~ 197 K. Through adjusting the Ni:Mn:Ga ratio to affect valence electron concentration e/a, T_M was successfully tuned to room temperature, and a large negative ΔS was observed in a single crystal. The -ΔS attained 18.0 J·kg-1·K-1 under a field change of 0–5 T. We also focused on the metamagnetic alloys that show mechanisms different from the conventional ones. It was found that post-annealing in suitable conditions or introducing interstitial H atoms can shift the T_M across a wide temperature range while retaining the strong metamagnetic behavior, and hence, retaining large magnetocaloric effect (MCE) and magnetoresistance (MR). The melt-spun technique can disorder atoms and make the ribbons display a B2 structure, but the metamagnetic behavior, as well as the MCE, becomes weak due to the enhanced saturated magnetization of martensites. We also studied the effect of Fe/Co co-doping in Ni₄₅(Co_1-xFe_x)5Mn36.6In13.4 metamagnetic alloys. Introduction of Fe atoms can assist the conversion of the Mn–Mn coupling from antiferromagnetic to ferromagnetic, thus maintaining the strong metamagnetic behavior and large MCE and MR. Furthermore, a small thermal hysteresis but significant magnetic hysteresis was observed around T_M in Ni₅₁Mn_49-xIn_x metamagnetic systems, which must be related to different nucleation mechanisms of structural transition under different external perturbations.     

Influence of Ni/Mn ratio on magnetostructural transformation and magnetocaloric effect in Ni_(48-x)Co_2Mn_(38+x)Sn_(12)(x = 0, 1.0, 1.5, 2.0,and 2.5) ferromagnetic shape memory alloys

An investigation on the magnetostructural transformation and magnetocaloric properties of Ni_(48-x)Co_2Mn_(38+x)Sn_(12)(x = 0, 1.0, 1.5, 2.0, and 2.5) ferromagnetic shape memory alloys is carried out. With the partial replacement of Ni by Mn in the Ni_(48)Co_2Mn_(38)Sn_(12) alloy, the electron concentration decreases. As a result, the martensitic transformation temperature is decreased into the temperature window between the Curie-temperatures of austenite and martensite. Thus, the samples with x = 1.5 and 2.0 exhibit the magnetostructural transformation between the weak-magnetization martensite and ferromagnetic austenite at room temperature. The structural transformation can be induced not only by the temperature,but also by the magnetic field. Accompanied by the magnetic-field-induced magnetostructural transformation, a considerable magnetocaloric effect is observed. With the increase of x, the maximum entropy change decreases, but the effective magnetic cooling capacity increases.     

定向凝固生长对Ni-Mn-Ga-RE (RE=TbSm)合金磁感生应变的影响

关键词：     

Martensitic and magnetic domain structures of ferroics of the Ni-Mn-Ga and Co-Ni-Ga families

The martensitic and magnetic domain structures of polycrystalline and single-crystal samples of ferromagnetic Heusler alloys of the Ni-Mn-Ga and Co-Ni-Ga families have been revealed and studied using optical microscopy. The main mechanisms of formation and interaction of 90° and 180° magnetic domains have been described.     

Enhanced magnetoresistance through magnetic-field-induced phase transition in Ni2MnGa co-doped with Co and Mn

We report the observation of giant negative magnetoresistance up to −46% at 60 kOe magnetic field in Ni_1.68Co_0.32Mn_1.20Ga_0.80 alloy, which is about 5 times larger than that reported in Ni-Mn-Ga alloys. The significant change in resistivity during martensitic transformation originates from the altered electronic structure due to the change of magnetic state. The magnetic-field-induced phase transition from partially antiferromagnetic martensite to ferromagnetic austenite is responsible for the enhanced magnetoresistance.     

The field and temperature dependence of the magnetic and structural properties of the shape memory compound Ni(1.84)Mn(1.64)In(0.52)

Magnetization and high resolution neutron powder diffraction measurements have been made on the magnetic shape memory alloy Ni(1.84)Mn(1.64)In(0.52). The compound undergoes a broad structural phase transition, which on heating starts at ～150?K and finishes at ～215?K. On cooling there is a ～20?K hysteresis. The high temperature parent phase is cubic (a?=?5.988??) with the L2(1) structure in which the excess Mn atoms occupy the vacancies on the Ni and In sites. The magnetic moment is located mainly on the Mn atoms with the same magnitude on both the 4a (Mn) and 4b (In) sites. The low temperature martensite is monoclinic with parameters a?=?4.405(2), b?=?5.553(2), c?=?12.950(2)??, β?=?86.47(10)°?and space group P2/m. The magnetic properties of the martensitic phase are complex and indicate metamagnetic behaviour.