小周期金属多层膜厚度评价

超晶格多层膜是随着现代科技的进步而发展起来的新一代电子薄膜材料,半导体超晶格和量子阱多层膜材料在光电子领域已经占据了不可取代的地位。1988年,法国科学家在由Fe、Cr交替沉积而形成的[Fe/Cr]金属多层膜中发现了超过50%的磁电阻变化率,这种现象被称为巨磁阻效应(GMR)[1]。     

About SnF2 stannous fluoride. IV. Kinetics of the α → γ and β, γ → α transitions

The kinetics of the reconstructive first order phase transitions α → γ (upon heating) and β, γ → α (upon cooling) of SnF₂ were studied by quantitative X-ray powder diffraction. The main feature of the kinetics is that these transformations are incomplete over a wide temperature range. Consequently it is not possible to fit the experimental data using the usual solid state rate expressions. Although these transitions are not reversible (large hysteresis) the empirical use of a kinetic model of a reversible transformation provides a good fit. The α → γ transformation was also investigated by D.T.A.; this transition was found to be greatly influenced by particle size: the transition temperature increases with grain size, and its enthalpy decreases. The X-ray investigation revealed that the process of the α → γ transformation involves an intermediate noncrystalline phase named the “transition phase.” It is suggested that the transition proceeds through a process of fragmentation-reconstruction.     

Characterization of defects and surface structures in microporous materials by HRTEM, HRSEM, and AFM.

High-resolution transmission (HRTEM) and high-resolution scanning electron microscopy as well as atomic force microscopy (AFM), X-ray diffraction, and electron diffraction were used for studying the zeolites MFI, MEL, and the MFIMEL intergrowth system. All three zeolites consisted of individual particles having a size in the range of approximately 0.5 m to 5 m. The particle habits varied from rather cubelike to almost spherelike with many intermediate habits. Typically, the particles of these three zeolites were assembled by many individual blocks that differed in the dimension from about 25 nm to 140 nm as well as in the shape from very frequently almost rectangular (for MFI, MEL, and MFIMEL) to sometimes roundish or irregular habits (mainly for MFIMEL). An estimate shows that some 104 up to more than 106 densely packed blocks typically may assemble each individual zeolite particle or, related to the corresponding unit cell dimension, about 108 up to 1010 unit cells. The fine surface structure of zeolite particles was terracelike with steps between adjacent terraces typically in the range of 20 nm to 60 nm; the minimum step measured was approximately 4 nm. A detailed study of the surface topography was performed by AFM, detecting organic molecules at the block intersections. The presence of topological defects was observed by HRTEM and electron diffraction.     

High-pressure studies of (Mg0.9Fe0.1)2SiO4 olivine using raman spectroscopy, X-ray diffraction, and mössbauer spectroscopy

High-pressure studies of (Mg(0.9)Fe(0.1))2SiO4 olivine were performed at ambient temperature using X-ray diffraction, Raman spectroscopy, and M?ssbauer spectroscopy. At approximately 40 GPa, a change of compressibility associated with saturation of the anisotropic compression mechanism was detected. This change is interpreted to result from the appearance of Si2O7 dimer defects, as deduced from Raman spectroscopy; the appearance of such defects also accounts for the previously reported pressure-induced amorphization observed for this material upon additional compression. Furthermore, this behavior is followed by a spin crossover of Fe(2+) that occurs over a wide pressure range, as revealed by M?ssbauer spectroscopy.     

NMR approach to kinetics of polymer ordering in polyacrylonitrile solutions and acrylonitrile-sodium methallylsulfonate copolymer solutions: Solution-concentration and polymer-tacticity effect

Partial crystallinity of polyacrylonitrile and acrylonitrile-sodium methallylsulfonate copolymer is detected by X-ray diffraction in dimethyl formamide and glycerol-dimethyl formamide solutions in the range of polymer concentration (0.14, 0.325 mol/mol). Kinetics of isothermal ordering are followed by NMR for various temperatures, polymer concentration of the solutions and polymer tacticities. The rate of polymer ordering increases upon either a decrease of the temperature, an increase of the polymer concentration or an increase of the percentage of isotactic triads. Mandelkern's model of isothermal polymer crystallisation is applied to estimate the size of critical crystalline nuclei. Assuming that crystallites growth is negligible along polymer chain axis, one can deduce the maximal size of crystallites along this axis. The size of the crystallites perpendicularly to polymer chain axis is evaluated by X-ray diffraction. It is found to be of the order of 100 Å.     

Detection of stress whitening in plastics with the help of X-ray dark field imaging

The processing of thermoplastics can induce a wide range of defects such as stress whitening, cavitation and porosity, which can adversely affect the reliability of the final products. Hence, fast and effective non-destructive detection methods for such defects are highly important for quality assurance on production lines. In this paper, X-ray dark field imaging is presented as a new non-destructive testing method that allows the visualization of stress whitening or cavitation efficiently. The performance of the method is demonstrated for the case of an injection-moulded polyvinylidene fluoride part that exhibits stress whitening. Whereas the stress whitening could not be detected by conventional X-ray imaging, it was localized by an X-ray dark field image acquired within a few minutes. Once the precise location of the stress whitening was known, it was possible to verify the result by local micro X-ray computed tomography and by a micro section image.     

Effect of synthesis methods on the morphology of nanosized tin dioxide particles

The effect of precursors on the microstructure of nanocrystalline tin dioxide is studied by thermal analysis, IR spectroscopy, electron microscopy, and X-ray powder diffraction. The precursor precipitated in an optimal pH range whose dehydration and crystallization occur over a wide temperature range with low degrees of oxolation yields crystalline tin dioxide with grain sizes on the order of 16 nm upon calcination at 800°C for 2 h.     

Synthesis of nanoporous metal oxides through the self-assembly of phloroglucinol-formaldehyde resol and tri-block copolymer

A versatile route to synthesize nanoporous crystalline metal oxides has been developed through the self-assembly of phloroglucinol-formaldehyde resol and tri-block copolymer templates. Materials were characterized by a complementary combination of X-ray diffraction, nitrogen sorption, and transmission electron microscopy. Metal oxides synthesized using this route have remarkably high surface area when compared with the commercial samples. The surface area of metal oxides decreased upon calcination at higher temperatures. However, the surface area was still much higher when compared with the commercial samples. TEM investigation reveals that upon calcination at higher temperature, the size of the crystal increased but the short range order was merely disturbed. The analyses show that the present method is suitable as a direct route to synthesize crystalline nanoporous metal oxides. Hydrogen bonding plays a key role in the preferential arrangement of porous metal-carbon structure in the domain of tri-block copolymer. The nanoporous metal oxides with ordered mesoporous structure, high surface area, and crystalline framework are expected to show significant improvement in catalysis and nano-technology.     

Nickel ferrite spinel as catalyst precursor in the dry reforming of methane:Synthesis,characterization and catalytic properties

Dry reforming of methane by CO2 using nickel ferrite as precursor of catalysts was investigated.Nickel ferrite crystalline particles were prepared by coprecipitation of nitrates with NaOH or ammonia followed by calcination,or by hydrothermal synthesis without calcination step.The textural and structural properties were determined by a number of analysis methods,including X-ray diffraction (XRD),Raman spectroscopy and X-ray photoelectron spectroscopy (XPS),among which X-ray diffraction (XRD) was at room and variable temperatures.All synthesized oxides showed the presence of micro or nanoparticles of NiFe2O4 inverse spinel,but Fe2O3 (hematite) was also present when ammonia was used for coprecipitation.The reducibility by hydrogen was studied by temperature-programmed reduction (TPR) and in situ XRD,which showed the influence of the preparation method.The surface area (BET),particle size (Rietveld refinement),as well as surface Ni/Fe atomic ratio (XPS) and the behavior upon reduction varied according to the synthesis method.The catalytic reactivity was investigated using isopropanol decomposition to determine the acid/base properties.The catalytic performance of methane reforming with CO2 was measured with and without the pre-treatment of catalysts under H2 in 650-800 C range.The catalytic conversions of methane and CO2 were quite low but they increased when the catalysts were pre-reduced.A significant contribution of reverse water gas shift reaction accounted for the low values of H2 /CO ratio.No coking was observed as shown by the reoxidation step performed after the catalytic reactions.The possible formation of nickel-iron alloy observed during the study of reducibility by hydrogen was invoked to account for the catalytic behavior.     

X-ray diffraction and optical birefringence studies on four nematogenic difluorobenzene derivatives

The results of optical microscopy, DSC, X-ray diffraction and optical birefringence studies on four nematogenic difluorobenzene derivatives are presented. The thermal stability of the compounds increases substantially as greater flexibility is introduced into the core structure. Average intermolecular distances, obtained from X-ray data, are found to increase when a comparatively rigid planar phenyl ring is substituted by a flexible non-planar cyclohexyl ring in the core structure. From the values of apparent molecular lengths in the nematic phase, a short range antiferroelectric type of association is found to exist between neighbouring molecules. Density values suggest that the molecular packing is less efficient with increasing flexibility either in chain- or in core-structure. All the refractive indices exhibit normal dispersive behaviour, and a positive optical anisotropy is observed in all the compounds which decreases quickly with temperature. Temperature dependences of orientational order parameters, determined from both X-ray and optical birefringence studies, are presented. Variations of different physical properties with order parameters are discussed.     

Bio-inspired catechol chemistry for electrophoretic nanotechnology of oxide films

The stabilization of defects in ZnO at high temperatures has been investigated. The properties of unmodified and modified ZnO nanoparticles (NPs) with 2 at.% of Ag prepared by microwave assisted combustion method, have been systematically studied using X-ray diffraction (XRD), photoluminescence (PL), X-ray photoelectron spectroscopy (XPS) and photocatalytic activity measurements. Though the XRD data shows a marginal shift in the ZnO peak position upon Ag addition, the amount of shift does not change with annealing temperatures. The PL data reveals that the defect mediated visible emission intensity of unmodified ZnO NPs increases with increase in the annealing temperature, whereas it remains almost unchanged in Ag-ZnO. This study clearly establishes that silver is an efficient stabilizer of intrinsic defects in ZnO at high temperatures. This is further supported by the core and valence band XPS spectra.     

Glass Transition in Crystalline Cyanoadamantane

Preliminary results of a calorimetric investigation of the different states of crystalline cyanoadamantane are presented. Adiabatic calorimetry was used to investigate the equilibrium phases. Modulated differential scanning calorimetry was used to investigate the domain of metastability of the rotator phase. Noticeable short range order modifications are revealed at the approach of the glass transition. They are characterized by single crystal X-ray diffraction experiments.     

Conformational effect of 2,6-bis(imidazol-1-yl)pyridine on the self-assembly of 1D coordination chains: spontaneous resolution, supramolecular isomerism, and structural transformation

The achiral 2,6-bis(imidazol-1-yl)pyridine (L) was used as the ditopic organic tecton for the formation of coordination polymers with Zn(II) ions. Hydrothermal reaction between L and ZnX2 (X=Br, Cl) afforded spontaneous resolved double helical motifs in ZnLCl2.0.5H2O (1) and ZnLBr2.0.25H2O (2). In the homochiral crystals of 1a and 2a, the helices are of M-helicity, whereas, in 1b and 2b, they are of P-helicity. In contrast, solvothermal reaction between L and ZnCl2 in dried DMF afforded achiral ZnLCl2 (3a), which exhibits a zigzag polymeric motif. An achiral polymorph 3b which contains 21 helical chains was obtained in wet DMF. The formation of different 1D motifs was related to the conformations of L. All these compounds were characterized by infrared spectroscopy, elemental analyses, and single-crystal X-ray diffraction. As revealed by thermal gravimetric analysis and powder X-ray diffraction study, the homochiral motif in 1 was stable even upon removal of guest water molecules. Contrastingly, structural transformation from 3a or 3b to 1 is possible upon hydration.     

Fabrication and gas sensing property of honeycomb-like ZnO

We report the structural characterization and proposed formation mechanism of honeycomb-like ZnO conglomerations fabricated by direct precipitation method. X-ray diffraction （XRD）, energy-disperse X-ray spectrometry （EDS）, scanning electron microscopy （SEM） showed that the as-prepared ZnO calcined at 700 ℃ were micron sphere particles with honeycomb-like structure. In the UV-vis absorbing spectrum, it was observed that there is a new additional absorption band at 260 nm, and it was speculated that the absorption may be caused by defects on the surface and interface of honeycomb-like ZnO. The as-products showed high sensitivity and short response time to sulfured hydrogen gas. These results demonstrate that honeycomb-like ZnO conglomerations are very promising materials for fabricating H2S gas sensors.     

Short Range Order in Noncrystalline Iron(III) Sulfide

The short range order in noncrystalline iron (III) sulfide has been studied by a radial distribution analysis of the diffuse scattered intensity from X-ray diffraction. Supplementary information was obtained from the Mayn oscillation in the Extended X-ray Absorption Edge Fine Structure (EXAFS) of the Fe? K edge. The average iron-sulfur distance determined was d(FeS) = 2.285(30) Å. The data infer the presence of Fe? Fe interactions at distances between 2.7–2.9 Å.     

Determination of nanoparticle sizes by X-ray diffraction

Different procedures for analysis of particle sizes by the X-ray diffraction method are compared by the example of nanoparticles of nickel and iron(3+) oxide (Fe₂O₃). A modified Warren-Averbach method is proposed for the analysis of the X-ray diffraction line profile based on the approximation by the Voigt function, which yields stable solutions, and the efficiency of the method is shown. The analysis within the frame-work of the Warren-Averbach method makes it possible to restore the distribution function of nanoparticles (crystallites) over true diameters, which satisfactorily correlates with electron microscopy data. The applicability of the Warren-Averbach method to the estimation of crystallite sizes by the analysis of a single diffraction line is substantiated. The range of the applicability of the Scherrer, Williamson-Hall, Warren-Averbach, and modified Warren-Averbach methods to the substructure analysis by the X-ray diffraction is determined as depending on the method of nanostructure formation.     

Mechanism study of reduction of CO_2 into formic acid by in-situ hydrogen produced from water splitting with Zn: Zn/ZnO interface autocatalytic role

We have previously developed a new process of highly efficient conversion of CO_2 and water into formic acid with metallic Zn without the addition of catalyst, however, its mechanism is not clear, particularly in the catalytic role of Zn/ZnO interface. Herein, the autocatalytic role of Zn/ZnO interface formed in situ during the reduction of CO_2 into formic acid with Zn in water was studied by combining high resolution transmission electron microscopy(HRTEM), X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS) techniques and experimental data. The electron microscope results show that possible defects or dislocations formed on Zn/ZnO interface, in which plays a key role for Zn H-formation. Further XPS analyses indicate that oxygen vacancies on Zn/ZnO interface increased at short reaction times(less than 10 min). These analyses and experimental results suggest that a highly efficient and rapid conversion of CO_2 and water into formic acid should involve an autocatalytic role of the Zn/ZnO interface formed in situ, particularly at the beginning of the reaction.     

Tuning luminescent properties of a metal organic framework by insertion of metal complexes

Abstract

We report the preparation and characterisation of new emissive materials based on the insertion of platinum(II) and iridium(III) complexes inside the Al(OH)(bipyridine dicarboxylate) metal organic framework (MOF-253). Guest incorporation is performed by coordination of a metal complex precursor, and provides increased robustness to the system compared to guest inclusion by its physical diffusion. Powder X-ray diffraction analysis highlights the high degree of crystallinity of the materials, with a complete change in the lattice parameters upon metal complex insertion. The photophysical properties of the resulting materials were thoroughly investigated. This synthetic approach is particularly attractive since, as we show, it is possible to tune the emission maxima of our materials over the entire visible range.     

Phase behavior of concentrated aqueous solutions of cetyltrimethylammonium bromide (CTAB) and sodium hydroxy naphthoate (SHN)

We have characterized the phase behavior of mixtures of the cationic surfactant cetyltrimethylammonium bromide (CTAB) and the organic salt 3-sodium-2-hydroxy naphthoate (SHN) over a wide range of surfactant concentrations using polarizing optical microscopy and X-ray diffraction. A variety of liquid crystalline phases, such as hexagonal, lamellar with and without curvature defects, and nematic, are observed in these mixtures. At high temperatures the curvature defects in the lamellar phase are annealed gradually on decreasing the water content. However, at lower temperatures these two lamellar structures are separated by an intermediate phase, where the bilayer defects appear to order into a lattice. The ternary phase diagram shows a high degree of symmetry about the line corresponding to equimolar CTAB/SHN composition, as in the case of mixtures of cationic and anionic surfactants.     

Phase transitions in novel disulphide-bridged alkoxycyanobiphenyl dimers

The synthesis, characterization and mesomorphic properties of the first examples of novel disulphide-bridged alkoxycyanobiphenyl dimers are reported. The thermal behaviour of these mesogens was investigated by polarizing optical microscopy, differential scanning calorimetry and X-ray diffractometry. The dimers with a shorter spacer exhibit only the nematic phase while dimers with a longer spacer display nematic as well as smectic phases. X-ray diffraction experiments reveal the intercalated structure of the SmA phase of these dimers and the presence of short range SmA-like order in the N phase (cybotactic nematic) of all the compounds, except the one with the shortest spacer.