Ultrasonic characterization of the kinetics of water sorption in hydrogels

A complex mechanism characterizes the water uptake kinetics in hydrogels, as a consequence of the strong structural changes occurring in the material during the sorption process. Water acts as a plasticizer, reducing the glass transition temperature of the polymer below the sorption temperature and determining a glass transition in the polymer. In this study the changes in the ultrasonic attenuation and velocity in semicrystalline Poly-vinyl-alcohol (PVA) hydrogel films during water sorption are measured by a pulse-echo system. The ultrasonic wave propagation is applied to monitor the position of the swollen/unswollen fronts and to the measurement of velocity and attenuation. The structural changes in PVA hydrogels, monitored by Wide Angle X-ray Diffractometry (WAXD), performed during the sorption process, are correlated with the ultrasonic data.     

Polyaniline/poly(vinyl alcohol) (PAN/PVA) composite films: the synergy of film structural stiffening, redox amplification, and mobile species compositional dynamics

In this work, we report an unexpected but significant improvement of the redox behavior of conducting polyaniline (PAN) films by trapping intrinsically nonconducting poly(vinyl alcohol) (PVA) in the matrix of the polymer acting as stiffening and/or cross-linking agents. Film structural stiffening of PAN/PVA inclusion was studied in relation to film compositional dynamics. PAN and PAN/PVA composite films were potentiodynamically deposited using high-frequency electrochemical quartz crystal microbalance under electrochemical potentiodynamic control. From the simultaneously obtained measurements of nanogravimetric and cyclic voltammetric data, it has been found that the presence of PVA in the deposition solution increased the rate of PAN film growth as a function of PVA concentration. Characterization of the resultant composite films in monomer-free acidic electrolyte solutions showed significantly enhanced redox behavior of PAN/PVA composite films (with different PVA contents) compared to pure PAN by a factor of ～2–4. For the study of structure–composition relationships of composite polymer films, fluxes of instantaneous mobile species dynamics (ion/solvent) as a function of film redox conversion and potential cycling were correlated with film structural stiffening and the observed unusual redox enhancement of PAN/PVA composite films. Using various experimental timescales, we were able to resolve bound (associated with ion transfer) and free solvent compositional dynamics (associated with thermodynamic activity balance).     

Cationic Modified PVA Hydrogels Provide Low Friction and Excellent Mechanical Properties for Potential Cartilage and Orthopedic Applications

Poly(vinyl alcohol) (PVA) hydrogel is a promising candidate for articular cartilage repair yet restrained by its mechanical strength and tribological property. Current work reports a newly designed PVA-based hydrogel modified by glycerol (g), bacterial cellulose (BC), and a cationic polymer poly (diallyl dimethylammonium chloride) (PDMDAAC), which is a novel cationic strengthening choice. The resultant PVA-g-BC-PDMDAAC hydrogel proves the effectiveness of this modification scheme, with a confined compressive modulus of 19.56 MPa and a friction coefficient of 0.057 at a joint-equivalent load and low sliding speed. The water content, swelling property, and creep behavior of this hydrogel are also within a cartilage-mimetic range. The properties of PVA-based hydrogels before PDMDAAC addition are likewise studied as a cross-reference. Besides, PDMDAAC-modified PVA hydrogel realizes ideal mechanical and lubrication properties with a relatively low PVA concentration (10 wt.%) and facile fabrication process, which lays a foundation for mass production and marketization in the future.     

Preparation and Characterization of Interpenetrating Polymer Hydrogels Based on Poly(acrylic acid) and Poly(vinyl alcohol)

Interpenetrating polymer hydrogels (IPHs) of Poly (vinyl alcohol) (PVA) and Poly (acrylic acid) (PAAc) have been prepared by a sequential method: crosslinked PAAc chains were formed in aqueous solution by crosslinking copolymerization of acrylic acid and N, N′-methylenebisacrylamide in the presence of PVA. The application of freezing-thawing cycles (F-T cycles) leads to the formation of a PVA hydrogel within the synthesized PAAc hydrogel. The swelling and the viscoelastic properties of the prepared IPHs were evaluated on the basis of the structural features obtained from solid state ¹³C-NMR spectroscopy.     

Studies on bound water in poly(vinyl alcohol). Hydrogel by DSC and FT-NMR

The phase transition of water bound in poly(vinyl alcohol)(PVA) hydrogel was measured by differential scanning calorimetry. The cross-link density calculated from the swelling ratio of PVA hydrogel ranged from 3 × 10^?5 to 1 × 10^?3 according to the total dose of ⁶⁰Co γ-ray irradiation. From the enthalpy of melting, it was found that water in PVA gel can be classified into at least three groups; ca. 1–1.5 mol non-freezing water, 5–6 mol freezing bound water, and the rest free water, corresponding to each hydroxyl group of PVA. The characteristic properties of polymer hydrogel were attributed to the large number of molecules of freezing bound water in the network. The amount of free water depended markedly upon cross-link density; however, it was not apparent in PVA gel with cross-link density >2.0 × 10^?4. The decreases in the nuclear magnetic resonance relaxation times of water and PVA were related to the cross-link density and were found to level off at a cross-link density 2.0 × 10^?4.     

Blood compatibility of novel poly(gamma-glutamic acid)/polyvinyl alcohol hydrogels

Sodium poly(gamma-glutamic acid) (PGA), a water-soluble and biodegradable polypeptide, was reacted with polyvinyl alcohol (PVA) to form hydrogel without any chemical treatment. The gelation occurred probably due to physical cross-linking of polymer chains by interpenetrating hydrogen bonding. From the results of thermal analysis, PGA/PVA exhibited better thermal stability than native PVA. Although the swelling ratio decreased with the increase of PGA content, however, the water resistance and retention were improved. The tensile strength of the PGA/PVA hydrogel membranes was about 15-30% lower than that of the native PVA, whereas the elongation was increased 2.0-2.6 times. The amount of protein adsorbed and platelets adhered on the PGA/PVA membranes were significantly curtailed with increasing PGA content, thereby showing improved blood compatibility. The as-fabricated hydrogels were proven to be non-cytotoxic evaluated in vitro by L-929 fibroblast incubation. Overall results demonstrate that the non-cytotoxic PGA/PVA hydrogels, due to better water resistance, mechanical properties and blood compatibility could be very promising candidates for blood-contacting medical devices.     

Swelling and Reswelling Characteristics of Cross-Linked Poly(vinyl alcohol)/Chitosan Hydrogel Film

Poly(vinyl alcohol) (PVA), hydrogel was prepared by using glutaraldehyde as a cross-linking agent. The blend semi-synthetic hydrogel film, consisting of PVA and chitosan, was prepared from a solvent-casting technique and characterized for their intermolecular interactions using infrared method. The swelling and reswelling behaviors, as well as mechanical properties of the synthetic and semi-synthetic gels were examined by weighing and tensile testing, respectively. Cross-linking the two types of polymer with glutaraldehyde produces a film with lower crystallinity and smaller swelling and reswelling degrees, but having improved mechanical properties. Also, the two types of films show a pH-dependent swelling characteristic. It was found that, the reswelling properties of synthetic hydrogels can be improved by blending PVA with certain ratio of natural polymer. This blending film, can be improve sandy soil properties for cultivation, such as, controlled release of water.     

Smart hydrogels for Novel Optical Functions

Nanocomposites of inherently conductive polyaniline (PANI) within a highly hydrophilic polyvinyl alcohol (PVA) based hydrogel have been produced by coupling a conventional dispersion chemical oxidative polymerization to a subsequent high energy irradiation step, in order to convert the polymer stabilizing the aqueous dispersion, namely the PVA, into a highly water swollen hydrogel incorporating the PANI particles. The incorporation of the electroactive and “pH-sensitive” polymer into a transparent and highly permeable hydrogel matrix has been pursued as a route to the development of a novel class of potentially biocompatible, smart hydrogels that can respond to changes of the surrounding environment with measurable changes in their optical properties. Absorption spectra show that the optical absorption bands typical of PANI, known to be reversibly affected by changes of the polymer oxidation state or pH or both, are well preserved in the PVA hydrogels. Even more interestingly, fluorescence is observed from the nanoparticles of PANI in its inherently conductive form, whose intensity is strongly affected by changes of pH. This has enhanced the importance of this material to a large extent from both a scientific and a practical point of view.     

Mesoscopic and microscopic investigation on poly(vinyl alcohol) hydrogels in the presence of sodium decylsulfate

The structure of poly(vinyl alcohol) (PVA) hydrogels formed as a result of freeze/thaw treatments of aqueous solutions of the polymer (11 wt % PVA) in the freshly prepared state is analyzed through the combined use of small (SANS) and ultrasmall (USANS) angle neutron scattering techniques. The structure of these hydrogels may be described in terms of polymer rich regions, with dimensions of the order of 1-2 microm, dispersed in a water rich phase, forming two bicontinuous phases. The PVA chains in the polymer rich phase form a network where the cross-linking points are mainly crystalline aggregates of PVA having average dimensions of approximately 45 A. The structural organization of freeze/thaw PVA hydrogel membranes does not change either after rehydration of dried gels or in the presence of a tensile force. Finally, addition of surfactant micelles inside the gel provides a formulation with both hydrophobic and hydrophilic regions, which demonstrates the potential of the system for drug delivery. Both SANS and EPR measurements show that sodium decylsulfate (C10OS) micelles do not significantly interact with the PVA gel. Variation of the gel structure by the number of freeze/thaw cycles should modulate the rate of release of an active constituent, for example, in a dermal patch.     

States of water in poly(vinyl alcohol) hydrogels

Poly(vinyl alcohol) (PVA) hydrogels with various water contents were prepared from 10 wt% aqueous solutions of mixtures of PVA and anionic poly(styrene sulfonic acid) sodium salt (NaPSS) by casting, dehydrating, and then extracting NaPSS. The existence of three types of ice were suggested by differential scanning calorimetry (DSC) measurements for every frozen hydrogel. In the frozen hydrogels the states of water, except unfrozen water, were ice of free water and disordered ice crystals. The mobility and activation energy for motion of water molecules in unfrozen hydrogels were investigated by using pulsed nuclear magnetic resonance (PNMR) measurements. It was concluded that there are two states of water in the unfrozen hydrogel, i.e. unfrozen water and disordered water which is mainly formed in narrow apertures in the hydrogel. The discrepancy between the DSC and PNMR measurements was explained by a structural transformation during cooling.     

Ultrafine hydrogel fibers with dual temperature‐ and pH‐responsive swelling behaviors

Ultrafine hydrogel fibers that were responsive to both temperature and pH signals were prepared through the electrospinning of poly(N‐isopropylacrylamide) (PNIPAAm) and poly(acrylic acid) mixtures in dimethylformamide. Both the diameters (700 nm to 1.2 μm) and packing of the fibers could be controlled through changes in the polymer compositions and PNIPAAm molecular weights. These fibers were rendered water‐insoluble by the addition of either Na₂HPO₄ or poly(vinyl alcohol) (PVA) to the solution, followed by the heat curing of the fibers. The fibers crosslinked with Na₂HPO₄ swelled to 30–120 times in water; this was significantly higher than the swelling of those crosslinked with PVA. The PVA‐crosslinked hydrogel fibers, however, exhibited faster swelling kinetics; that is, they reached equilibrium swelling in less than 5 min at 25 °C. They were also more stable after 1 week of water exposure; that is, they lost less mass and retained their fibrous form better. All the hydrogel fibers showed a drastic increase in the swelling between pH 4 and 5. The PVA‐crosslinked hydrogel fibers exhibited distinct temperature‐responsive phase‐transition behavior of PNIPAAm, whereas the Na₂HPO₄‐crosslinked hydrogel fibers showed altered two‐stage phase transitions that reflected side‐chain modification of PNIPAAm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6331–6339, 2004     

Polyvinyl alcohol hydrogels I. Microscopic structure by freeze-etching and critical point drying techniques

Froeze-etching (FE) and critical point drying (CPD) techniques were employed to prepare samples for investigating surface and bulk structures of polyvinyl alcohol (PVA) hydrogels by scanning electron microscopy. The hydrogels were obtained by freezing homogeneous solutions containing PVA polymer in either water or an aqueous solution of dimethyl sulfoxide (DMSO). An oriented porous structure was observed in the PVA hydrogel prepared without DMSO. The structure on the surface was found to be more porous than in the bulk for PVA hydrogels prepared from aqueous DMSO solutions. For given compositions of the hydrogels, samples prepared by FE technique showed a highly porous fibrillar structure on the surface, while those prepared by CPD technique showed a collapsed fibrillar structure with much less porosity. This marked difference indicates a collapse of the surface structure caused by the CPD technique. The CPD technique also led to significant reduction in porosity and loss of fibrillar structure in the bulk. Volume shrinkage of hydrogels caused by dehydration in ethanol may be responsible for the surface collapse as well as alteration of bulk structure. The FE technique reveals a more native structure of hydrogels than the commonly used CPD technique. However, it suffers from disadvantages such as charging and structural damage at high magnifications.     

Designing Polyaniline (PANI) and Polyvinyl Alcohol (PVA) Based Electrically Conductive Nanocomposites: Preparation,Characterization and Blood Compatible Study

Novel electrically conducting and biocompatible composite hydrogel materials comprising of poly (aniline) (PANI) nanoparticles dispersed in a poly (vinyl alcohol) (PVA) – g–poly (acrylic acid) (PAA) matrix were prepared by in situ polymerization of aniline. The prepared ionic hydrogels were evaluated for their water uptake capacity in distilled water. While structural insights into the synthesized polymer was sought by Fourier Transform Infrared (FTIR) spectroscopy and X–Ray Diffraction (XRD) techniques, morphology and dimension of PANI particles embedded into the colored optically semi–transparent polymer films were evaluated by Scanning Electron Microscopy (SEM) analysis and Transmittance Electron Microscopy (TEM) while thermal behavior of composite hydrogel was investigated by Differential Scanning Calorimetry (DSC). Electrical conductivity of composite hydrogels containing different PANI percentage was determined by LCR. Considering the potential of electrically conductive nanocomposites materials in biomedical applications the in vitro blood compatibility of nanocomposites was investigated by employing several in vitro tests.     

Preparation of hydrogel from green polymer

A new method was used for the production of hydrogels from green polymer with a higher swelling ratio. These hydrogels were synthesized first by graft copolymerization between acrylamide (AM) and poly(vinyl alcohol) (PVA) with alkaline or kraft lignin (AM‐PVA‐g‐lignin) and then by mixing with acrylamide monomer. The kraft and alkaline lignins were isolated from pulping liquor and characterized using UV and FT‐IR spectroscopy, and the formed hydrogels were characterized using FT‐IR spectroscopy and scanning electron microscopy (SEM). Compared with kraft lignin hydrogel, the alkaline lignin hydrogel had very high swelling ratios and slower water uptake and deswelling rates attributed to its compatible network structure. The hydrogels formed were used also to study the influence of sodium chloride on the absorption capacity at room temperature and swelling ratios at different temperatures. Copyright © 2004 John Wiley & Sons, Ltd.     

PVA-PAMPS-PAA三元互穿网络型水凝胶的合成及其性能研究

以2-丙烯酰胺基-2-甲基丙磺酸(AMPS)、丙烯酸(AA)以及聚乙烯醇(PVA)为原料,制备了PVA-PAMPS-PAA三元互穿网络型(T-IPN)水凝胶.红外分析表明,PVA与PAA以及PAMPS之间形成了较强的氢键,使得PVA分子上的C—O伸缩震动吸收峰移向了低波数处.X射线衍射以及电镜分析表明,当PVA用量较低时,PVA能均匀的穿插于凝胶网络中,形成完善的互穿网络结构,当PVA用量过高时,部分的PVA结晶而使得凝胶出现相分离.研究了该三元互穿网络型水凝胶的溶胀性能,结果表明,该水凝胶的平衡溶胀比在200至340之间,并且随着AA以及AMPS用量的增加,凝胶的溶胀速率以及平衡溶胀比均升高.该三元互穿网络型水凝胶在酸性溶液中和在碱性溶液中表现出截然不同的消溶胀性能;并且随着溶液pH的升高,凝胶在pH=9.0附近出现体积突变,表现出pH敏感性.通过研究T-IPN水凝胶的抗压缩性能发现,利用线型高分子、柔性高分子网络以及刚性高分子网络制备的三元互穿网络型水凝胶能在高溶胀比下保持较高的强度.溶胀比为180的T-IPN水凝胶,其最大抗压缩强度可达12.1 MPa.进一步研究发现,凝胶的组成以及溶胀比均对凝胶的抗压缩强度和压缩应变均存在较大的影响.     

大孔PAMPS/PVA半互穿网络型水凝胶的制备及其性能研究

以PEG6000为成孔剂, 合成了大孔聚(2-丙烯酰胺-2-甲基丙磺酸)/聚乙烯醇半互穿网络型(s-IPN)水凝胶. 红外分析表明, PVA与PAMPS之间形成了较强的氢键, 使得PVA分子上的C—O伸缩振动吸收峰移向了低波数处. X射线衍射分析发现, 当PVA用量较高时, 由于部分的PVA结晶, 使得凝胶的半互穿网络结构不均匀. 电镜分析结果表明, 没有使用成孔剂的凝胶表面成褶皱形, 不存在任何孔洞结构; 而以PEG6000为成孔剂的凝胶表面存在相互贯穿的大孔结构. 研究了该水凝胶的溶胀性能, 结果表明, 该水凝胶的平衡溶胀度在116至320之间; 而成孔剂PEG6000的加入能较大幅度提高凝胶的溶胀速率, 凝胶在240 min之内就能达到溶胀平衡. 对凝胶抗压缩性能的研究表明, 当PVA用量为9.1% (w)时, 凝胶的抗压缩强度最大, 可达12.0 MPa; 而成孔剂的加入会在一定程度削弱凝胶的抗压缩强度. 该凝胶具有较好的电场敏感性, 研究发现, 将吸去离子水达到溶胀平衡的凝胶放入施加有电场的0.2 mol•L－1 NaCl溶液中时, 凝胶迅速偏向阳极. 而PVA和成孔剂PGE6000的用量均对凝胶的偏转速度以及最大偏转角存在较大的影响.     

Investigations of the microscopic structure of poly(vinyl alcohol) hydrogels by confocal laser scanning microscopy

The fluorescence mode confocal laser scanning microscopy (CLSM) is introduced as an alternative method to investigate the bulk structure of poly(vinyl alcohol) (PVA) hydrogel. Investigations of the bulk structure of hydrogel samples, prepared by freezing and controlled thawing of aqueous PVA solutions followed by fluorochrome conjugation, were possible in the native state because with this technique water does not need to be removed prior to examination. This is of advantage to other methods, such as scanning electron microscopy, requiring dehydration by critical-point drying or freeze-etching, because both may result in a significant alteration of the gel structure. CLSM images of the hydrogel bulk structure were taken at several successive intervals from the surface into the hydrogel (up to 60 μm) without freeze-fracturing or cutting the sample. Detailed morphological characterization is achievable by superimposing series of images taken at successive intervals and by magnifying special regions of interest. Images of hydrogel bulk structures revealed a continuous, three-dimensional network that originates from phase-separation (spinodal decomposition) during the freezing period. The pore or mesh size in the cryogel increased, from about 2–7 μm, with decreasing PVA concentration. The surface layer was only a few microns thick, and the bulk structure underneath showed neither porosity gradients nor structural orientations. Received: 29 April 2000/Accepted: 18 August 2000     

Spherical phospholipid polymer hydrogels for cell encapsulation prepared with a flow-focusing microfluidic channel device

To prepare spherical polymer hydrogels, we used a flow-focusing microfluidic channel device for mixing aqueous solutions of two water-soluble polymers. Continuous encapsulation of cells in the hydrogels was also examined. The polymers were bioinspired 2-methacryloyloxyethyl phosphorylcholine polymer bearing phenyl boronic acid groups (PMBV) and poly(vinyl alcohol) (PVA), which spontaneously form a hydrogel in aqueous medium via specific molecular complexation upon mixing, even when they were in cell culture medium. The microfluidic device was prepared with polydimethylsiloxan, and the surface of the channel was treated with fluoroalkyl compound to prevent sticking of the polymers on the surface. The microfluidic channel process could control the diameter of the spherical hydrogels in the range of 30-90 μm and generated highly monodispersed diameter spherical hydrogels. We found that the polymer distribution in the hydrogel was influenced by the PVA concentration and that the hydrogel could be dissociated by the addition of d-sorbitol to the suspension. The single cells could be encapsulated and remain viable in the hydrogels. The localized distribution of polymers in the hydrogel may provide an environment for modulating cell function. It is concluded that the spontaneous hydrogel formation between PMBV and PVA in the flow-focusing microfluidic channel device is applicable for continuous preparation of a spherical hydrogel-encapsulating living cell.     

聚乙烯醇/羧甲基壳聚糖共混水凝胶的辐射合成及性能

采用电子加速器辐照法制备了聚乙烯醇(PVA)/羧甲基壳聚糖(CMCH)共混水凝胶;研究了PVA与CMCH的配比、辐照剂量、温度以及pH值对PVA/CMCH共混水凝胶性能的影响.实验发现,PVA与CMCH在辐照剂量为40 kGy、配比为w(PVA)/w(CMCH)=5/1的条件下可得到强度较好的PVA/CMCH共混水凝胶,该水凝胶具有一定的温度和pH敏感性:在5~20℃时具有较高的溶胀率,温度在20℃以上溶胀率较低;水凝胶在pH<4.0和pH>6.0时溶胀率均较大,而当pH为4.0~6.0时溶胀率较小.