Iron(III) [bond] Salen complexes as enzyme models: mechanistic study of oxo(salen)iron complexes oxygenation of organic sulfides

The oxidation of a series of para-substituted phenyl methyl sulfides was carried out with several oxo(salen)iron (salen = N,N'-bis(salicylidine)ethylenediaminato) complexes in acetonitrile. The oxo complex [O=Fe(IV)(salen)](*+), generated from an iron(III) [bond] salen complex and iodosylbenzene, effectively oxidizes the organic sulfides to the corresponding sulfoxides. The formation of [O [double bond] Fe(IV)(salen)](*+) as the active oxidant is supported by resonance Raman studies. The kinetic data indicate that the reaction is first-order in the oxidant and fractional-order with respect to sulfide. The observed saturation kinetics of the reaction and spectral data indicate that the substrate binds to the oxidant before the rate-controlling step. The rate constant (k) values for the product formation step determined using Michaelis-Menten kinetics correlate well with Hammett sigma constants, giving reaction constant (rho) values in the range of -0.65 to -1.54 for different oxo(salen)iron complexes. The log k values observed in the oxidation of each aryl methyl sulfide by substituted oxo(salen)iron complexes also correlate with Hammett sigma constants, giving positive rho values. The substituent effect, UV-vis absorption, and EPR spectral studies indicate oxygen atom transfer from the oxidant to the substrate in the rate-determining step.     

Kinetics and mechanisms of catalytic oxygen atom transfer with oxorhenium(V) oxazoline complexes

The rhenium(V) monooxo complexes (hoz)2Re(O)Cl (1) and [(hoz)2Re(O)(OH2)][OTf] (2) have been synthesized and fully characterized (hoz = 2-(2'-hydroxyphenyl)-2-oxazoline). A single-crystal X-ray structure of 2 has been solved: space group = P1, a = 13.61(2) A, b = 14.76(2) A, c = 11.871(14) A, alpha = 93.69(4) degrees, beta = 99.43(4) degrees, gamma = 108.44(4) degrees, Z = 4; the structure was refined to final residuals R = 0.0455 and Rw = 0.1055. 1 and 2 catalyze oxygen atom transfer from aryl sulfoxides to alkyl sulfides and oxygen-scrambling between sulfoxides to yield sulfone and sulfide. Superior catalytic activity has been observed for 2 due to the availability of a coordination site on the rhenium. The active form of the catalyst is a dioxo rhenium(VII) intermediate, [Re(O)2(hoz)2]+ (3). In the presence of sulfide, 3 is rapidly reduced to [Re(O)(hoz)2]+ with sulfoxide as the sole organic product. The transition state is very sensitive to electronic influences. A Hammett correlation plot with para-substituted thioanisole derivatives gave a reaction constant rho of -4.6 +/- 0.4, in agreement with an electrophilic oxygen transfer from rhenium. The catalytic reaction features inhibition by sulfides at high concentrations. The equilibrium constants for sulfide binding to complex 2 (cause of inhibition), K2 (L x mol(-1)), were determined for a few sulfides: Me2S (22 +/- 3), Et2S (14 +/- 2), and tBu2S (8 +/- 2). Thermodynamic data, obtained from equilibrium measurements in solution, show that the S=O bond in alkyl sulfoxides is stronger than in aryl sulfoxides. The Re=O bond strength in 3 was estimated to be about 20 kcal x mol(-1). The high activity and oxygen electrophilicity of complex 3 are discussed and related to analogous molybdenum systems.     

Aqueous ferryl(IV) ion: kinetics of oxygen atom transfer to substrates and oxo exchange with solvent water

The aqueous iron(IV) ion, Fe(IV)(aq)O(2+), generated from O(3) and Fe(aq)(2+), reacts rapidly with various oxygen atom acceptors (sulfoxides, a water-soluble triarylphosphine, and a thiolatocobalt complex). In each case, Fe(IV)(aq)O(2+) is reduced to Fe(aq)(2+), and the substrate is oxidized to a product expected for oxygen atom transfer. Competition methods were used to determine the kinetics of these reactions, some of which have rate constants in excess of 10(7) M(-1) s(-1). Oxidation of dimethyl sulfoxide (DMSO) has k = 1.26 x 10(5) M(-1) s(-1) and shows no deuterium kinetic isotope effect, k(DMSO-d(6)) = 1.23 x 10(5) M(-1) s(-1). The Fe(IV)(aq)O(2+)/sulfoxide reaction is the product-forming step in a very efficient Fe(aq)(2+)-catalyzed oxidation of sulfoxides by ozone. This catalytic cycle, combined with labeling experiments in H(2)(18)O, was used to determine the rate constant for the oxo-group exchange between Fe(IV)(aq)O(2+) and solvent water under acidic conditions, k(exch) = 1.4 x 10(3) s(-1).     

Oxidation of sulfoxides by hydrogen peroxide,catalyzed by methyltrioxorhenium(VII)

Dialkyl and diaryl sulfoxides are oxidized to sulfones by hydrogen peroxide using methyltrioxorhenium as the catalyst. The reaction rate is negligible without a catalyst. The kinetics study was performed in CH3CN-H2O (4:1 v/v) at 298 K with [H+] at 0.1 M, conditions which make the equilibration between MTO and its peroxo complexes more rapid than the oxygen-transfer step. The values for the rate constant for the oxygen-transfer step lie in the range 0.1-3 L mol-1 s-1. The rate constants were significantly smaller than for the oxidation of sulfides to sulfoxides. A study of ring-substituted diaryl sulfoxides yielded kinetics results that are consistent with nucleophilic attack of the sulfur atom on the peroxide oxygen group since rho = -0.65. The results cited refer to the reactions of the diperoxo from the catalyst, MeRe(O)(eta 2-O2)2H2O. The monoperoxo complex showed no measurable reactivity toward sulfoxides, in contrast with the situation for nearly every other substrate. That unusual finding suggests a hydrogen-bonded interaction between the substrate and the diperoxorhenium compound which cannot exist with the monoperoxo compound.     

Methyloxorhenium(V) complexes with two bidentate ligands: syntheses and reactivity studies

Four new methyloxorhenium(V) complexes were synthesized: MeReO(PA)(2) (1), MeReO(HQ)(2) (2), MeReO(MQ)(2) (3), and MeReO(diphenylphosphinobenzoate)(2) (4) (in which PAH = 2-picolinic acid, HQH = 8-hydroxyquinoline, and MQH = 8-mercaptoquinoline). Although only one geometric structure has been identified crystallographically for 1, 2, and 3, two isomers of 3 and 4 in solution were detected by NMR spectroscopy. These compounds catalyze the sulfoxidation of thioethers by pyridine N-oxides and sulfoxides. The rate law for the reaction between pyridine N-oxides and thioethers, catalyzed by 1, shows a first-order dependence on the concentrations of pyridine N-oxide and 1. The second-order rate constants of a series of para-substituted pyridine N-oxides fall in the range of 0.27-7.5 L mol(-)(1) s(-)(1). Correlation of these rate constants by the Hammett LFER method gave a large negative reaction constant, rho = -5.2. The next and rapid step does not influence the kinetics, but it could be explored with competition experiments carried out with a pair of methyl aryl sulfides, MeSC(6)H(4)-p-Y. The value of each rate was expressed relative to the reference compound that has Y = H. A Hammett analysis of k(Y)/k(H) gave rho = -1.9. Oxygen-18 labeled 1 was used in a single turnover experiment for 4-picoline N-oxide and dimethyl sulfide. No (18)O-labeled DMSO was found. We suggest that the reaction proceeds by way of two intermediates that were not observed during the reaction. The first intermediate contains an opened PA-chelate ring; this allows the pyridine N-oxide to access the primary coordination sphere of rhenium. The second intermediate is a cis-dioxorhenium(VII) species, which the thioether then attacks. Oxygen-18 experiments were used to show that the two oxygens of this intermediate are not equivalent; only the new oxygen is attacked by, and transferred to, SR(2). Water inhibits the reaction because it hydrolyzes the rhenium(VII) intermediate.     

A kinetic study on the pairwise competition reaction of alpha-diazo esters with rhodium(II) catalysts: implication for the mechanism of Rh(II)-carbene transfer.

The relative rate constants for the Rh(II)-mediated diazo decomposition of a series of para- or meta-substituted diazophenylacetates were measured through intermolecular competition. The kinetic data were further subjected to Hammett correlation analysis and were found to have better linear correlation with sigma(+). Reaction constants for four Rh(II) catalysts have been obtained, Rh(2)(OAc)(4) (rho = -1.29 with sigma(+), r = -0.99), Rh(2)(Ooct)(4) (rho = -1.31 with sigma(+), r = -0.99), Rh(2)(acam)(4) (rho = -1.18 with sigma(+), r = -0.99), Rh(2)(O(2)CCF(3))(4) (rho = -1.46 with sigma(+), r = -0.99). The mechanistic implications of these data are discussed.     

Mechanism of selective oxidation of organic sulfides with Oxo(salen)chromium(V) complexes

The selective oxidation of organic sulfides to sulfoxides by oxo(salen)chromium(V) complexes in acetonitrile is overall second-order, first-order each in the oxidant and the substrate. The rate constant, k(2), values of several para-substituted phenyl methyl sulfides correlate linearly with Hammett sigma constants and the rho values are in the range of -1.3 to -2.7 with different substituted oxo(salen)chromium(V) complexes. The reactivity of different alkyl sulfides is in accordance with Taft's steric substituent constant, E(S). A mechanism involving direct oxygen atom transfer from the oxidant to the substrate rather than electron transfer is envisaged. Correlation analyses show the presence of an inverse relationship between reactivity and selectivity in the reaction of various sulfides with a given oxo(salen)chromium(V) complex and vice versa. Mathematical treatment of the results shows that this redox system falls under strong reactivity-selectivity principle (RSP).     

Borate-catalyzed reactions of hydrogen peroxide: kinetics and mechanism of the oxidation of organic sulfides by peroxoborates

The kinetics of the oxidation of substituted phenyl methyl sulfides by hydrogen peroxide in borate/boric acid buffers were investigated as a function of pH, total peroxide concentration, and total boron concentration. Second-order rate constants at 25 degrees C for the reaction of methyl 4-nitrophenyl sulfide and H(2)O(2), monoperoxoborate, HOOB(OH)(3) (-), or diperoxoborate, (HOO)(2)B(OH)(2) (-), are 8.29 x 10(-5), 1.51 x 10(-2) and 1.06 x 10(-2) M(-1) s(-1), respectively. Peroxoboric acid, HOOB(OH)(2), is unreactive. The Hammett rho values for the reactions of a range of substituted phenyl methyl sulfides and hydrogen peroxide, monoperoxoborate or diperoxoborate are -1.50 +/- 0.1, -0.65 +/- 0.07 and -0.48 (two points only), respectively. The rho values for the peroxoborates are of significantly lower magnitude than expected from their reactivity compared to other peroxides. Nevertheless the negative rho values indicate positive charge development on the sulfur atom in the transition state consistent with nucleophilic attack by the organic sulfides on the peroxoborates as with the other peroxides. The kinetic parameters, including the lack of reactivity of peroxoboric acid, are discussed in terms of the differences in the transition state of reactions involving peroxoboron species with respect to those of other peroxides.     

Catalysis of the beta-elimination of HF from isomeric 2-fluoroethylpyridines and 1-methyl-2-fluoroethylpyridinium salts. Proton-activating factors and methyl-activating factors as a mechanistic test to distinguish between concerted E2 and E1cb irreversible mechanisms

Second-order rate constants, k(OH)(N), M(-)(1) s(-)(1), for the beta-elimination reactions of HF with 2-(2-fluoroethyl)pyridine (2), 3-(2-fluoroethyl)pyridine (3), and 4-(2-fluoroethyl)pyridine (4) in OH(-)/H(2)O, at 50 degrees C and mu = 1 M KCl, are = 0.646 x 10(-)(4) M(-)(1) s(-)(1), = 2.97 x 10(-)(6) M(-)(1) s(-)(1), and = 5.28 x 10(-)(4) M(-)(1) s(-)(1), respectively. When compared with the second-order rate constants for the same processes with the nitrogen-methylated substrates 1-methyl-2-(2-fluoroethyl)pyridinium iodide (5), 1-methyl-3-(2-fluoroethyl)pyridinium iodide (6), and 1-methyl-4-(2-fluoroethyl)pyridinium iodide (7), the methyl-activating factor (MethylAF) can be calculated from the ratio k(OH)(NCH)3/, and a value of 8.7 x 10(5) is obtained with substrates 5/2, a value of 1.6 x 10(3) with 6/3, and a value of 2.1 x 10(4) with 7/4. The high values of MethylAF are in agreement with an irreversible E1cb mechanism (A(N)D(E) + D(N)) for substrates 5 and 7 and with the high stability of the intermediate carbanion related to its enamine-type structure. In acetohydroxamate/acetohydroxamic acid buffers (pH 8.45-9.42) and acetate/acetic acid buffers (pH 4.13-5.13), the beta-elimination reactions of HF, with substrates 2 and 4, occur at NH(+), the substrates protonated at the nitrogen atom of the pyridine ring, even when the [NH(+)] is much lower than the [N], the unprotonated substrate, due to the high proton-activating factor (PAF) value observed: 3.6 x 10(5) for 2 and 6.5 x 10(4) for 4 with acetohydroxamate base. These high PAF values are indicative of an irreversible E1cb mechanism rather than a concerted E2 (A(N)D(E)D(N)) mechanism. Finally, the rate constant for carbanion formation from NH(+) with 2 is k(B)(NH)+ = 0.35 M(-)(1) s(-)(1), which is lower than when chlorine is the leaving group ( = 1.05 M(-)(1) s(-)(1); Alunni, S.; Busti, A. J. Chem. Soc., Perkin Trans. 2 2001, 778). This is direct experimental evidence that some lengthening of the carbon-leaving group bond can occur in the intermediate carbanion. This is a point of interest for interpreting a heavy-atom isotope effect.     

Fluorescence from Samarium(II) Iodide and Its Electron Transfer Quenching: Dynamics of the Reaction of Benzyl Radicals with Sm(II)

The luminescence from SmI(2) in THF can be readily quenched by a variety of electron acceptors. In the case of organohalides, the reaction is quite fast; for example, for dichloromethane the rate constant is 2.7 x 10(8) M(-)(1) s(-)(1). Electron transfer leads to halide loss and formation of the carbon-centered radical. In the case of benzyl chloride, the benzyl radicals produced can be readily detected using laser flash photolysis techniques. This electron-transfer reaction has been used as a source of benzyl radicals in order to determine the rate constant for their reaction with SmI(2); the value obtained is (5.3 +/- 1.4) x 10(7) M(-)(1) s(-)(1) in THF at room temperature. The effect of HMPA on the spectroscopic properties of SmI(2) has also been examined.     

Metal ion-dependent fluorescent dynamics of photoexcited zinc-porphyrin and zinc-myoglobin modified with ethylenediaminetetraacetic acid

The reconstituted zinc-myoglobin (ZnMb) dyads, ZnMb-[M(II)(edta)], have been prepared by incorporating a zinc-porphyrin (ZnP) cofactor modified with ethylenediaminetetraacetic acid (H(4)edta) into apo-Mb. In case of the monomeric ZnP(edta) cofactor coordinated by one pyridine molecule, ZnP(py)(edta), a spontaneous 1:1 complex with a transient metal ion was formed in an aqueous solvent, and the photoexcited singlet state of ZnP, (1)(ZnP)*, was quenched by the [Cu(II)(edta)] moiety through intramolecular photoinduced electron-transfer (ET) reaction. The rate constant for the intramolecular quenching ET (k(q)) at 25 degrees C was successfully obtained as k(q) = 5.1 x 10(9) s(-1). In the case of Co(2+), Ni(2+), and Mn(2+), intersystem crossing by paramagnetic effect was mainly considered between (1)(ZnP)* and the [M(II)(edta)] complex. For the ZnMb-[M(II)(edta)] systems, the intramolecular ET reaction between the excited singlet state of (1)(ZnMb)* and the [Cu(II)(edta)] moieties provided the slower quenching rate constant, k(q) = 2.1 x 10(8) s(-1), compared with that of the ZnP(py)(edta) one. Kinetic studies also presented the efficient fluorescence quenching of the (1)(ZnMb)*-[Co(II)(edta)] dyad. Our study clearly demonstrates that wrapping of the ZnP cofactor by the apoprotein matrix and synthetic manipulation at the Mb surface ensure metal ion-sensitive fluorescent dynamics of ZnMb and provides valuable information to elucidate the complicated mechanism of the biological photoinduced ET reactions of hemoproteins.     

Redox chemistry of morpholine-based Os(VI)-hydrazido complexes: trans-[Os(VI)(tpy)(Cl)2(NN(CH2)4O)](2+)

The oxidations of benzyl alcohol, PPh3, and the sulfides (SEt2 and SPh2) (Ph = phenyl and Et = ethyl) by the Os(VI)-hydrazido complex trans-[Os(VI)(tpy)(Cl)2(NN(CH2)4O)](2+) (tpy = 2,2':6',2' '-terpyridine and O(CH2)4N(-) = morpholide) have been investigated in CH3CN solution by UV-visible monitoring and product analysis by gas chromatography-mass spectrometry. For benzyl alcohol and the sulfides, the rate law for the formation of the Os(V)-hydrazido complex, trans-[Os(V)(tpy)(Cl)2(NN(CH2)4O)](+), is first order in both trans-[Os(VI)(tpy)(Cl)2(NN(CH2)4O)](2+) and reductant, with k(benzyl) (25.0 +/- 0.1 degrees C, CH3CN) = (1.80 +/- 0.07) x 10(-4) M(-1) s(-1), k(SEt2) = (1.33 +/- 0.02) x 10(-1) M(-1) s(-1), and k(SPh2) = (1.12 +/- 0.05) x 10(-1) M(-1) s(-1). Reduction of trans-[Os(VI)(tpy)(Cl)2(NN(CH2)4O)](2+) by PPh3 is rapid and accompanied by isomerization and solvolysis to give the Os(IV)-hydrazido product, cis-[Os(IV)(tpy)(NCCH3)2(NN(CH2)4O)](2+), and OPPh3. This reaction presumably occurs by net double Cl-atom transfer to PPh3 to give Cl2PPh3 that subsequently undergoes hydrolysis by trace H2O to give the final product, OPPh3. In the X-ray crystal structure of the Os(IV)-hydrazido complex, the Os-N-N angle of 130.9(5) degrees and the Os-N bond length of 1.971(7) A are consistent with an Os-N double bond.     

Kinetic study of the phthalimide N-oxyl radical in acetic acid. Hydrogen abstraction from substituted toluenes, benzaldehydes, and benzyl alcohols

The phthalimide N-oxyl (PINO) radical was generated by the oxidation of N-hydroxyphthalimide (NHPI) with Pb(OAc)4 in acetic acid. The molar absorptivity of PINO* is 1.36 x 10(3) L mol(-1) cm(-1) at lambda(max) 382 nm. The PINO radical decomposes slowly with a second-order rate constant of 0.6 +/- 0.1 L mol(-1) s(-1) at 25 degrees C. The reactions of PINO(*) with substituted toluenes, benzaldehydes, and benzyl alcohols were investigated under an argon atmosphere. The second-order rate constants were correlated by means of a Hammett analysis. The reactions with toluenes and benzyl alcohols have better correlations with sigma+ (rho = -1.3 and -0.41), and the reaction with benzaldehydes correlates better with sigma (rho = -0.91). The kinetic isotope effect was also studied and significantly large values of k(H)/k(D) were obtained: 25.0 (p-xylene), 27.1 (toluene), 27.5 (benzaldehyde), and 16.9 (benzyl alcohol) at 25 degrees C. From the Arrhenius plot for the reactions with p-xylene and p-xylene-d(10), the difference of the activation energies, E(a)(D) - E(a)(H), was 12.6 +/- 0.8 kJ mol(-1) and the ratio of preexponential factors, A(H)/A(D), was 0.17 +/- 0.05. These findings indicate that quantum mechanical tunneling plays an important role in these reactions.     

Equilibrium and Redox Kinetics of Copper(II)-Thiourea Complexes

Stopped-flow spectrophotometric measurements identify and determine equilibrium data for thiourea (tu) complexes of copper(II) formed in aqueous solution. In excess Cu(II), the complex ion [Cu(tu)](2+) has a stability constant beta(1) = 2.3 +/- 0.1 M(-)(1) and molar absorptivity at 340 nm of epsilon(1) = (4.0 +/- 0.2) x 10(3) M(-)(1) cm(-)(1) at 25.0 degrees C, 2.48 mM HClO(4), and &mgr; = 464 mM (NaClO(4)). The fast reduction of Cu(II) by excess tu obeys the rate law -d[Cu(II)]/dt = k'[Cu(II)](2)[tu](7) with a value for the ninth-order rate constant k' = (1.60 +/- 0.18) x 10(14) M(-)(8) s(-)(1), which derives from a rate-determining step involving the bimolecular decomposition of two complexed Cu(II) species. Copper(II) catalyzes the reduction of hexachloroiridate(IV) by tu according to the rate law -d[IrCl(6)(2)(-)]/dt = (k(2,unc)[tu](2) + k(1,cat) [tu](5)[Cu(II)])[IrCl(6)(2)(-)]. Least-squares analysis yields values of k(2,unc) and k(1,cat) equaling 385 +/- 4 M(-)(2) s(-)(1) and (3.7 +/- 0.1) x 10(13) M(-)(6) s(-)(1), respectively, at &mgr; = 115 mM (NaClO(4)). The corresponding mechanism has a rate-determining step that involves the oxidation of [Cu(II)(tu)(5)](2+) by [IrCl(6)](2)(-) rather than the bimolecular reaction of two cupric-tu complexes.     

Electronic energy self-exchange with macrocyclic chromium(III) complexes

The luminescence lifetimes of N-deuterated Cr(III) complexes of macrocyclic tetraamine ligands, trans-CrN(4)X(2)(n)()(+), are substantially longer than those of their undeuterated counterparts in room temperature solution. Thus, excited-state emission quenching of the longer lived species by the shorter lived species may be studied by analyzing the decay profile following pulsed excitation. Flash photolysis experiments were carried out for three deuterated/undeuterated pairs of trans-CrN(4)X(2)(n)()(+) complexes (where X = CN-, NH(3), and F-). For the trans-Cr(cyclam)(CN)(2)(+) system in H(2)O, it was determined that energy transfer was occurring between the deuterated and undeuterated species. Although the rate constant of energy transfer was too fast to measure explicitly, it could be bracketed as k(et) >7 x 10(6) M(-1) s(-1). For this reaction it was possible to measure an equilibrium constant which was very near 1.0. For trans-Cr(cyclam)(NH(3))(2)(3+) in DMSO, it was also established that energy transfer was occurring and rate constants of 2.4 x 10(6) M(-1) s(-1) (mu = 0.1) and 9.7 x 10(6) M(-1) s(-1) (mu = 1.0) were determined by a Stern-Volmer analysis. For trans-Cr(tet a)F(2+) in H(2)O, no energy transfer was observed, which implies that the rate constant is <3 x 10(5) M(-1) s(-1). Because these energy-transfer reactions represent self-exchange energy transfer and are thus thermoneutral, we are able to analyze the results using Marcus theory and draw some conclusions about the relative importance of nuclear reorganization and electronic factors in the overall rate.     

Chlorine dioxide reduction by aqueous iron(II) through outer-sphere and inner-sphere electron-transfer pathways

The reduction of ClO(2) to ClO(2)(-) by aqueous iron(II) in 0.5 M HClO(4) proceeds by both outer-sphere (86%) and inner-sphere (14%) electron-transfer pathways. The second-order rate constant for the outer-sphere reaction is 1.3 x 10(6) M(-1) s(-1). The inner-sphere electron-transfer reaction takes place via the formation of FeClO(2)(2+) that is observed as an intermediate. The rate constant for the inner-sphere path (2.0 x 10(5) M(-1) s(-1)) is controlled by ClO(2) substitution of a coordinated water to give an inner-sphere complex between ClO(2) and Fe(II) that very rapidly transfers an electron to give (Fe(III)(ClO(2)(-))(H(2)O)(5)(2+))(IS). The composite activation parameters for the ClO(2)/Fe(aq)(2+) reaction (inner-sphere + outer-sphere) are the following: DeltaH(r)++ = 40 kJ mol(-1); DeltaS(r)++ = 1.7 J mol(-1) K(-1). The Fe(III)ClO(2)(2+) inner-sphere complex dissociates to give Fe(aq)(3+) and ClO(2)(-) (39.3 s(-1)). The activation parameters for the dissociation of this complex are the following: DeltaH(d)++= 76 kJ mol(-1); DeltaS(d)++= 32 J K(-1) mol(-1). The reaction of Fe(aq)(2+) with ClO(2)(-) is first order in each species with a second-order rate constant of k(ClO2)- = 2.0 x 10(3) M(-1) s(-1) that is five times larger than the rate constant for the Fe(aq)(2+) reaction with HClO(2) in H(2)SO(4) medium ([H(+)] = 0.01-0.13 M). The composite activation parameters for the Fe(aq)(2+)/Cl(III) reaction in H(2)SO(4) are DeltaH(Cl(III))++ = 41 kJ mol(-1) and DeltaS(Cl(III))++ = 48 J mol(-1) K(-1).     

Remote substituent effects on phenylchlorocarbene C-H insertion reactions

[structure: see text] Phenylchlorocarbene inserts into the tertiary CH bonds of 1,3-dimethyladamantane and 1-X-adamantanes (X = H, OMe, COOMe, Cl, CN). There is a good correlation between the relative rate constants for these insertions and the inductive substituent constants, sigma1(X), with rho = -1.5. Absolute rate constants for the insertions range from 2.5 x 10(5) M(-1) s(-1) for Ad-Me2 to 2.5 x 10(4) M(-1) s(-1) for Ad-CN. B3LYP/6-31G* calculations give a good account of reactivity in these systems.     

Generation of a peroxynitrato metal complex from nitrogen dioxide and coordinated superoxide

The reaction between photogenerated NO(2) radicals and a superoxochromium(III) complex, Cr(aq)OO(2+), occurs with rate constants k(Cr)(20) = (2.8 +/- 0.2) x 10(8) M(-)(1) s(-)(1) (20 vol % acetonitrile in water) and k(Cr)(40) = (2.6 +/- 0.5) x 10(8) M(-)(1) s(-)(1) (40 vol % acetonitrile) in aerated acidic solutions and ambient temperature. The product was deduced to be a peroxynitrato complex, Cr(aq)OONO(2)(2+), which undergoes homolytic cleavage of an N-O bond to return to the starting materials, the rate constants in the two solvent mixtures being k(H)(20) = 172 +/- 4 s(-)(1) and k(H)(40) = 197 +/- 7 s(-)(1). NO(2) reacts rapidly with 10-methyl-9,10-dihydroacridine, k(A)(20) = 2.2 x 10(7) M(-)(1) s(-)(1), k(A)(40) = (9.4 +/- 0.2) x 10(6) M(-)(1) s(-)(1), and with N,N,N',N'-tetramethylphenylenediamine, k(T)(40) = (1.84 +/- 0.03) x 10(8) M(-)(1) s(-)(1).     

Possible Role of the Iron Coordination Sphere in Hemoprotein Electron Transfer Self-Exchange: (1)H NMR Study of the Cytochrome c-PMe(3) Complex

The rates of self-exchange electron transfer in the trimethylphosphine complex of cytochrome c have been measured by an NMR technique over a large range of ionic strengths. The rate constant is 1.56 x 10(4) M(-)(1) s(-)(1) at 23 degrees C (&mgr; = 0.34 M) at pH 6.9. Dependence on ionic strength of the rate constant is treated by van Leeuwen theory. Extrapolation of the rate constant to infinite ionic strength gives a rate constant of 3.9 x 10(5) M(-)(1) s(-)(1). This rate constant is compared with others reported for myoglobin and cytochrome b(5)(). The values for these systems range over 2 orders of magnitude with myoglobin-PMe(3) < cytochrome b(5)() < cytochrome c-PMe(3) < cytochrome c. Analysis of the data in terms of Marcus theory gives a reorganization energy, lambda, for self-exchange of 0.75 eV mol(-)(1) for cytochrome c-PMe(3). Substitution of Met-80 by PMe(3) appears to influence only weakly the rearrangement barrier to electron transfer.     

Equilibrium and Kinetics of Bromine Hydrolysis

Equilibrium constants for bromine hydrolysis, K(1) = [HOBr][H(+)][Br(-)]/[Br(2)(aq)], are determined as a function of ionic strength (&mgr;) at 25.0 degrees C and as a function of temperature at &mgr; approximately 0 M. At &mgr; approximately 0 M and 25.0 degrees C, K(1) = (3.5 +/- 0.1) x 10(-)(9) M(2) and DeltaH degrees = 62 +/- 1 kJ mol(-)(1). At &mgr; = 0.50 M and 25.0 degrees C, K(1) = (6.1 +/- 0.1) x 10(-)(9) M(2) and the rate constant (k(-)(1)) for the reverse reaction of HOBr + H(+) + Br(-) equals (1.6 +/- 0.2) x 10(10) M(-)(2) s(-)(1). This reaction is general-acid-assisted with a Br?nsted alpha value of 0.2. The corresponding Br(2)(aq) hydrolysis rate constant, k(1), equals 97 s(-)(1), and the reaction is general-base-assisted (beta = 0.8).