温度对石墨电极性能的影响

运用电化学阻抗谱(EIS)并结合循环伏安法(CV)研究了石墨电极25和60 ℃时在1 mol·L-1 LiPF6-EC(碳酸乙烯酯):DEC(碳酸二乙酯):DMC(碳酸二甲酯)电解液中, 以及60 ℃时在1 mol·L-1 LiPF6-EC:DEC:DMC+5%VC(碳酸亚乙烯酯)电解液中的首次阴极极化过程. 发现高温下(60 ℃)石墨电极在1 mol·L-1 LiPF6-EC:DEC:DMC电解液中可逆循环容量衰减的主要原因在于其表面无法形成稳定的固体电解质相界面(SEI)膜. 实验结果显示, VC添加剂能够增进高温下石墨电极表面SEI膜的稳定性, 进而改进石墨电极的循环性能.     

添加剂氟代碳酸乙烯酯对锂离子电池性能的影响

在1 mol·L-1 LiPF6/碳酸乙烯酯(EC)+碳酸二甲酯(DMC)+碳酸甲乙酯(EMC)(EC、DMC、EMC体积比为1:1:1)电解液中加入体积比为2%的添加剂氟代碳酸乙烯酯(FEC), 用循环伏安法(CV)、扫描电镜(SEM)、能量散射光谱(EDS)、电化学阻抗谱(EIS)等方法, 研究了FEC 对锂离子电池性能及石墨化中间相碳微球(MCMB)电极/电解液界面性质的影响. 结果表明, 体积比2%FEC的添加可以抑制部分电解液溶剂的分解, 在MCMB电极表面形成一层性能优良的固体电解液相界面(SEI)膜, 降低了电池的阻抗, 明显提高了电池的比容量和循环稳定性.     

复合,多孔PVDF-HFP聚合物电解质膜的制备及其性能研究

采用溶剂/非溶剂方法—即相转移法制得PVDF＿HFP微孔膜,比较了DMC,DEC和PC等3种增塑剂的制孔作用.结果表明:DEC最好,DMC次之,而PC效果最差.聚合物的导电率为1.86×10-3Sm-1(LiPF6＿1mol/L;EC/DMC:1/1wt).     

锂离子电池正极材料LiNi1/3Co1/3Mn1/3O2在不同电解液中的性能研究

应用低热固相合成法制备锂离子电池正极材料L iCo1/3N i1/3Mn1/3O2.研究该材料的结构与形貌,并比较它在商品L iPF6盐和在实验室合成的L iBOB(L iB(C2O4)2)盐电解液中的电化学性能.在L iPF6/EC+DMC+DEC电解液中,该材料表现出优良的电化学性能,其于0.5C、1C、1.5C、2C、3C放电倍率的初始比容量依次为167、163、163、157、147mAh/g,电池的循环性能也较好,说明低热固相合成的材料的有较好的高倍率性能.在L iBOB/EC+DEC+DE电解液中,0.5C倍率下比容量为160 mAh/g,较之L iPF6盐电解液的相差不大,但在高倍率下的比容量有所下降.     

Studies on heat-treated MPCF anodes in Li ion batteries

The intercalation/deintercalation of lithium ions into the heat-treated mesophase pitch-based carbon fibers (MPCF) was carried out in 1 M LiPF₆-ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1, volume ratio) solution at room temperature. LiC₆ became incorporated into the heat-treated MPCF via an Li⁺ intercalation process. The transition stage was observed by a charge-discharge curve, impedance spectrum, and X-ray diffraction (XRD) spectrum. From the observed results, we conclude that the initial intercalation of lithium ions proceeds not by a reversible pathway, but rather, an irreversible path. From the deintercalation to the continuous cycles the lithium ion is intercalated and deintercalated via a reversible pathway.     

Synthesis of aminoalkylsilanes with oligo(ethylene oxide) unit as multifunctional electrolyte additives for lithium-ion batteries

Aminoalkylsilanes with oligo(ethylene oxide) units were designed and synthesized as multifunctional electrolyte additives for lithium-ion batteries. The chemical structures were fully characterized by nuclear magnetic resonance (NMR) spectroscopy and their thermal properties, viscosities, electrochemical windows, and ionic conductivities were systematically measured. With adding one of these compounds (1 vol. %, DSC3N1) in the baseline electrolyte 1.0 M LiPF₆ in EC: DEC (1:1, in volume), Li/LiCoO₂ half cell tests showed an improved cyclability after 100 cycles and improved rate capability at 5C rate condition. Electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), and energy dispersive spectroscopic (EDS) analysis confirmed the acid scavenging function and film forming capability of DSC3N1. These results demonstrated that the multifunctional organosilicon compounds have considerable potential as additives for use in lithium-ion batteries.     

Solvent decompositions and physical properties of decomposition compounds in Li-ion battery electrolytes studied by DFT calculations and molecular dynamics simulations

The density functional theory (DFT) calculations have been performed for the reduction decompositions of solvents widely used in Li-ion secondary battery electrolytes, ethylene carbonate (EC), propylene carbonate (PC), dimethyl carbonates (DMC), ethyl methyl carbonate (EMC), and diethyl carbonate (DEC), including a typical electrolyte additive, vinylene carbonate (VC), at the level of B3LYP/6-311+G(2d,p), both in the gas phase and solution using the polarizable conductor calculation model. In the gas phase, the first electron reduction for the cyclic carbonates and for the linear carbonates is found to be exothermic and endothermic, respectively, while the second electron reduction is endothermic for all the compounds examined. On the contrary, in solution both first and second electron reductions are exothermic for all the compounds. Among the solvents and the additive examined, the likelihood of undergoing the first electron reduction in solution was found in the order of EC > PC > VC > DMC > EMC > DEC with EC being the most likely reduced. VC, on the other hand, is most likely to undergo the second electron reduction among the compounds, in the order of VC > EC > PC. Based on the results, the experimentally demonstrated effectiveness of VC as an excellent electrolyte additive was discussed. The bulk thermodynamic properties of two dilithium alkylene glycol dicarbonates, dilithium ethylene glycol dicarbonate (Li-EDC) and dilithium 1,2-propylene glycol dicarbonate (Li-PDC), as the major component of solid-electrolyte interface (SEI) films were also examined through molecular dynamics (MD) simulations in order to understand the stability of the SEI film. It was found that film produced from a decomposition of EC, modeled by Li-EDC, has a higher density, more cohesive energy, and less solubility to the solvent than the film produced from decomposition of PC, Li-PDC. Further, MD simulations of the interface between the decomposition compound and graphite suggested that Li-EDC has more favorable interactions with the graphite surface than Li-PDC. The difference in the SEI film stability and the behavior of Li-ion battery cycling among the solvents were discussed in terms of the molecular structures.     

Roles of positive or negative electrodes in the thermal runaway of lithium-ion batteries: Accelerating rate calorimetry analyses with an all-inclusive microcell

To improve the thermal stability of lithium-ion batteries (LIBs) at elevated temperatures, the roles of positive or negative electrode materials in thermal runaway should be clarified. In this paper, we performed accelerating rare calorimetry analyses on two types of LIBs by using an all-inclusive microcell (AIM) method, where the AIM consists of all LIB components. We found that the thermal runaway in LiNi_0.8Co_0.15Al_0.05O₂ (NCA)|LiPF₆ dissolved in ethylene carbonate (EC)/diethyl carbonate solution (DEC) (EC/DEC = 1/1 by volume); LiPF₆(EC/DEC)|artificial graphite (AG) and LiNi_1/3Co_1/3Mn_1/3O₂ (NCM)|LiPF₆(EC/DEC)|AG cells is brought about by different electrodes, i.e., NCA for the former, and AG for the latter. The above difference is attributed to the different oxidation temperature of the EC/DEC solvents, indicating that we first pay attention which electrodes govern the thermal runaway. Trials for improving the thermal stability of NCA are also reported.     

电解液组成对尖晶石LiMn_2O_4中锂离子嵌脱过程的影响

运用电化学阻抗谱(EIS)研究了尖晶石LiMn2O4正极在1mol·L-1LiPF6-EC(碳酸乙烯酯)∶DEC(碳酸二乙酯)∶DMC(碳酸二甲酯),1mol·L-1LiPF6-EC∶DEC∶EMC(碳酸甲乙酯)和1mol·L-1LiPF6-EC∶DMC三种不同电解液中,-20-20℃范围内的阻抗谱特征随温度的变化.研究结果表明,温度强烈影响尖晶石LiMn2O4正极的阻抗谱特征,而电解液组成对尖晶石LiMn2O4正极阻抗谱特征的影响较小,但电解液组成对锂离子在尖晶石LiMn2O4正极中嵌入脱出过程相关动力学参数影响较大.测得尖晶石LiMn2O4正极在上述三种电解液中,锂离子迁移通过固体电解质相界面(SEI)膜的离子跳跃能垒平均值分别为7.60、16.40和18.40kJ·mol-1;电子电导率的热激活化能平均值分别为44.77、35.47和68.06kJ·mol-1;嵌入反应活化能平均值分别为52.19、46.19和69.86kJ·mol-1.     

New insight into the solid electrolyte interphase with use of a focused ion beam

The formation and evolution of the solid electrolyte interphase (SEI) film on the surface of natural graphite spheres in the electrolyte of 1 M LiPF6 in ethylene carbonate (EC) and dimethyl carbonate (DMC) (volume ratio 1:1) were investigated with use of focused ion beam (FIB) technology. Secondary electron FIB images clearly show the surface and cross-section morphology of the SEI film. The composition variation along the surface and cross section of the SEI film was also explored by the elemental line scan analysis (ELSA). The initial SEI film with an apparent thickness range of approximately 450 to approximately 980 nm is rough in morphology and nonuniform in composition, and contains small splits. After certain electrochemical cycles, the thickened SEI film displays microscale holes and obvious cracks on the surface, and the content of organic compounds increases. In addition, the concept of "internal SEI film" is first proposed based on the characterization of the cross section of the natural graphite spheres with the aid of FIB. Finally, the capacity fading mechanisms of the natural graphite spheres corresponding to different electrochemical stages are discussed.     

新型锂盐LiBC2O4F2在EC+DMC溶剂中的电化学行为

采用差热-热重(TG-DTA)、恒电流充放电和交流阻抗(EIS)分析了二氟草酸硼酸锂(LiODFB)的热稳定性, 研究了LiODFB/碳酸乙烯酯(EC)+碳酸二甲酯(DMC)电解液的电化学性能及界面特征. 实验结果表明, LiODFB不仅具有更高的热稳定性, 而且在EC+DMC溶剂中具有较好的电化学性能. 与使用LiPF6/EC+DMC的电解液相比, 锂离子电池应用LiODFB基电解液在55 ℃的高温具有更好的容量保持能力; 以0.5C、1C(1C=250 mA·g-1)倍率循环放电, 两种电池间的倍率性能差别较小; LiODFB能够在1.5 V(vs Li/Li+)左右在石墨电极表面还原形成一个优异稳定的保护性固体电解质相界面膜(SEI膜); 交流阻抗表明, 使用LiODFB基电解液的锂离子电池仅具有稍微增加的界面阻抗. 因此LiODFB是一种非常有希望替代LiPF6用作锂离子电池的新盐.     

The Effect of Electrode Potential on the Conductivity of Polymer Complexes of Nickel with Salen Ligands

The influence of the electrode potential on the electric conductivity of polymer complexes of nickel with salen-type ligands (where salen is N,N′-ethylene-bis(salicylideneimine)) differing by substituents in ligand′s benzene ring is studied in the course of measuring cyclic voltammograms. The highest electron conductivity is observed for the film of poly[N,N′-ethylene-bis(3-methoxysalicylideneiminato) nickel(II)] (poly[Ni(CH₃OSalen)]) in 1 M LiPF₆ solution in the ethylene carbonate-diethylcarbonate mixture (EC: DEC = 1: 1). Poly[N,N′-ethylene-bis(3-methyl-salicyleneiminato) nickel(II)] (or poly[Ni(CH₃Salen)]) was found to have the widest potential range of electronic conductivity. Conditions are selected for synthesizing films from solutions of the corresponding monomers in 1 M LiPF₆ EC: DEC electrolyte. The electrode potential intervals suitable for the use of poly[Ni(CH₃Salen)] as the buffer interlayer between the aluminum substrate and the cathode mass in lithium-ion batteries for protecting the latter against overcharge are found.

     

Low-temperature behavior of Li3V2(PO4)3/C as cathode material for lithium ion batteries

The electrochemical performance of Li₃V₂(PO₄)₃/C was investigated at various low temperatures in the electrolyte 1.0 mol dm⁻³ LiPF₆/ethyl carbonate (EC)+diethyl carbonate (DEC)+dimethyl carbonate (DMC) (volume ratio 1:1:1). The stable specific discharge capacity is 125.4, 122.6, 119.3, 116.6, 111.4, and 105.7 mAh g⁻¹ at 26, 10, 0, −10, −20, and −30 °C, respectively, in the voltage range of 2.3–4.5 V at 0.2 C rate. When the temperature decreases from −30 to −40 °C, there is a rapid decline in the capacity from 105.7 to 69.5 mAh g⁻¹, implying that there is a nonlinear relationship between the performance and temperature. With temperature decreasing, R _ct (corresponding to charge transfer resistance) increases rapidly, D (the lithium ion diffusion coefficients) decreases sharply, and the performance of electrolyte degenerates obviously, illustrating that the low-temperature electrochemical performance of Li₃V₂(PO₄)₃/C is mainly limited by R _ct, D _Li, and electrolyte.     

Anion receptor for enhanced thermal stability of the graphite anode interface in a Li-ion battery

The thermal stability of the solid electrolyte interphase (SEI) formed on a graphite anode has been enhanced by adding an anion receptor, tris(pentafluorophenyl)borane (TPFPB), to the electrolyte. The investigated electrolyte was LiBF₄ in a 2:1 mixture of ethylene carbonate (EC) and diethyl carbonate (DEC). Two concentrations of TPFPB have been investigated, 0.2 and 0.8 M. Galvanostatic cycling and differential scanning calorimetry (DSC) were used to study the effect of TPFPB on the electrochemical performance and thermal stability of graphite anodes. The best performance is obtained for a graphite anode cycled in an electrolyte with 0.2 M TPFPB: cyclability is improved, and the onset temperature for the first thermally activated reaction is increased by more than 60 °C up to 140–160 °C. X-ray photoelectron spectroscopy (XPS) has been used to examine the composition of the SEI formed in the different electrolytes; the improved performance for the graphite cycled with 0.2 M TPFPB is attributed to a reduced amount of LiF in the SEI.     

二氟二草酸硼酸锂对LiFePO4/石墨电池高温性能的影响

研究了二氟二草酸硼酸锂(LiODFB)作为锂盐加入到碳酸丙烯酯(PC)+碳酸乙烯酯(EC)+碳酸甲乙酯(EMC)(质量比为1:1:3)混合溶剂中对LiFePO4/石墨电池高温(60 ℃)循环性能的影响. 用线性扫描伏安法(LSV)测试了电解液的电化学窗口. 通过等离子发射光谱(ICP)和能量散射光谱(EDS)对LiFePO4材料高温条件下在不同电解液中的稳定性进行了研究; 并用扫描电镜(SEM)和电化学交流阻抗谱(EIS)分析了石墨负极表面的固体电解液相界面(SEI)膜的热稳定性. 结果表明: 一方面LiODFB基电解液能抑制LiFePO4材料在高温条件下Fe(II)的溶解, 防止溶解的Fe(II)在石墨上还原, 有效地降低电池阻抗; 另一方面, 在LiODFB基电解液中形成的石墨负极表面SEI膜具有更好的热稳定性, 能显著提高LiFePO4/石墨电池的高温循环性能.     

Electrochemical performances of two kinds of ternary electrolyte mixtures with lithium bis(oxalate)borate

Conductivities (??) of PC (propylene carbonate)/EMC (ethyl methyl carbon ate)/DMC (dimethyl carbonate) and EC (ethylene carbonate)/EMC/DMC solutions of lithium bis(oxalate)borate (LiBOB) were experimentally determined at a temperature (??) range from ?40.0 to 60.0°C. Under such experimental conditions, the effect factors on the ??, such as the salt molar concentrations (m), and the volume ratio of solvent compositions, were also investigated. The results showed that, in wide ?? range, the higher ?? were obtained with 0.7 mol L^?1 LiBOB in PC/EMC/DMC and 0.6 mol L^?1 LiBOB in EC/EMC/DMC and with a volume ratio of 1: 1: 1 and 1: 1: 2, respectively. When used in LiFePO₄/Li cells, compared to the cell with the electrolyte system of 1.0 mol L^?1 LiPF₆-EC/EMC/DMC (1: 1: 1), LiBOB cells with PC/EMC/DMC and EC/EMC/DMC electrolyte systems with the same volume mixture solvent compositions exhibit several advantages, such as more stable cycle performance, higher mean voltage, excellent large current discharge capability, more capacity retention at high temperature, and more stable storage performance, etc. This study not only shows that LiBOB is a very promising alternative salt for lithium ion chemistry, but also provides appropriate solvent to improve LiBOB??s electrochemical performance.     

LiCoO<Subscript>2</Subscript> electrode/electrolyte interface of Li-ion batteries investigated by electrochemical impedance spectroscopy

The storage behavior and the first delithiation of LiCoO₂ electrode in 1 mol/L LiPF₆-EC:DMC:DEC electrolyte were investigated by electrochemical impedance spectroscopy (EIS). It has found that, along with the increase of storage time, the thickness of SEI film increases, and some organic carbonate lithium compounds are formed due to spontaneous reactions occurring between the LiCoO₂ electrode and the electrolyte. When electrode potential is changed from 3.8 to 3.95 V, the reversible breakdown of the resistive SEI film occurs, which is attributed to the reversible dissolution of the SEI film component. With the increase of electrode potential, the thickness of SEI film increases rapidly above 4.2 V, due to overcharge reactions. The inductive loop observed in impedance spectra of the LiCoO₂ electrode in Li/LiCoO₂ cells is attributed to the formation of a Li_1−x CoO₂/LiCoO₂ concentration cell. Moreover, it has been demonstrated that the lithium-ion insertion-deinsertion in LiCoO₂ hosts can be well described by both Langmuir and Frumkin insertion isotherms, and the symmetry factor of charge transfer has been evaluated at 0.5. Supported by the Special Funds for Major State Basic Research Project of China (Grant No. 2002CB211804)     

A solid lithium electrolyte via addition of lithium isopropoxide to a metal-organic framework with open metal sites

The uptake of LiO(i)Pr in Mg(2)(dobdc) (dobdc(4-) = 1,4-dioxido-2,5-benzenedicarboxylate) followed by soaking in a typical electrolyte solution leads to the new solid lithium electrolyte Mg(2)(dobdc)·0.35LiO(i)Pr·0.25LiBF(4)·EC·DEC (EC = ethylene carbonate; DEC = diethyl carbonate). Two-point ac impedance data show a pressed pellet of this material to have a conductivity of 3.1 × 10(-4) S/cm at 300 K. In addition, the results from variable-temperature measurements reveal an activation energy of just 0.15 eV, while single-particle data suggest that intraparticle transport dominates conduction.     

Safety improvement of lithium ion batteries by organo-fluorine compounds

Thermal stability, electrochemical oxidation stability and charge/discharge characteristics of natural graphite powder were investigated by mixing of five fluoro-carbonates with 1 mol/L LiClO₄–EC/DEC/PC (1:1:1 vol.). DSC study revealed that thermal stability of the electrolyte solution was improved by mixing of fluoro-carbonates by 10.0–33.3 vol.%. Electrochemical oxidation stability was also improved. Oxidation currents for Pt electrode significantly decreased by mixing of fluoro-carbonates. In the fluoro-carbonate-mixed electrolyte solutions, electrochemical reduction of PC decreased with increasing concentration of fluoro-carbonate and current density. As a result, first coulombic efficiency for natural graphite electrode increased, that is, irreversible capacity decreased in the fluoro-carbonate-mixed solutions.     

电解液添加剂硫酸亚乙酯对锂离子电池性能的影响

在1 mol/L LiPF₆/碳酸乙烯酯+碳酸二甲酯+碳酸甲乙酯（体积比1∶1∶1）电解液中,采用恒流充放电测试、循环伏安法（CV）、扫描电子显微镜（SEM）、能量散射光谱（EDS）、电化学阻抗谱（EIS）等测试技术,研究了添加剂硫酸亚乙酯（DTD）对锂离子电池性能及石墨化中间相碳微球（MCMB）电极/电解液界面性质的影响。 结果表明,在电解液中引入体积分数0.01%DTD后,MCMB/Li电池可逆放电容量从300 mA·h/g提高至350 mA·h/g,电池总阻抗降低,循环稳定性提高。CV测试发现,在首次还原过程中,DTD在电极电位1.4 V左右（vs Li/Li⁺）发生电化学还原,参与了MCMB电极表面固体电解质相界面膜（SEI膜）的形成过程。 同时,DTD对LiMn₂O₄电极性能无不良影响。