超声萃取-免疫亲和柱净化-柱后光化学衍生高效液相色谱法同时测定蜂房药材中4种黄曲霉毒素

建立超声萃取-免疫亲和柱净化-柱后光化学衍生高效液相色谱同时测定蜂房药材中黄曲霉毒素B1、黄曲霉毒素B2、黄曲霉毒素G1、黄曲霉毒素G2含量的分析方法。样品经粉碎，过孔径为120μm筛后，采用70%甲醇溶液超声处理30 min，经免疫亲和柱净化、高效液相色谱分离、光化学柱后衍生，通过荧光检测器测定4种黄曲霉毒素的含量。黄曲霉毒素B1的线性范围为0.010 4～0.052 0 ng，相关系数为0.999 9；黄曲霉毒素B2的线性范围为0.003 8～0.019 0 ng，相关系数为0.999 8；黄曲霉毒素G1的线性范围为0.010 8～0.054 0 ng，相关系数为0.999 8；黄曲霉毒素G2的线性范围为0.003 8～0.019 0 ng，相关系数为0.999 8。4种黄曲霉毒素检出限分别为0.42、0.15、0.43、0.15μg/kg，测定结果的相对标准偏差不大于2.5%(n=6)，样品加标回收率为92.9%～96.9%。该方法操作简便，灵敏度高，可用于蜂房中黄曲霉毒素含量的测定。     

电化学衍生-高效液相色谱和荧光光度法检测花生酱中的黄曲霉毒素

建立了免疫亲和柱净化-柱后电化学衍生-高效液相色谱结合荧光光度法检测花生酱中4种黄曲霉毒素(B1、B2、G1和G2)的方法。样品经过体积分数为60%的甲醇提取,通过免疫亲和柱净化后,以KobraCell装置柱后衍生,高效液相色谱法分离定量。黄曲霉毒素B1、B2、G1和G2能达到完全的基线分离,检测限分别为0.5、0.15、0.5和0.15μg/kg,线性相关系数0.999,回收率可达74.2%～96.5%,相对标准偏差低于11%。该方法能够满足花生酱中黄曲霉毒素检测的需要。     

免疫亲和柱净化-柱后光化学衍生-高效液相色谱法同时检测粮谷中的黄曲霉毒素、玉米赤霉烯酮和赭曲霉毒素A

建立了同时检测粮谷中黄曲霉毒素(B1、B2、G1和G2)、玉米赤霉烯酮和赭曲霉毒素A的免疫亲和柱净化-柱后光化学衍生-高效液相色谱方法。样品经过甲醇-水(体积比为80∶20)提取,通过免疫亲和柱富集和净化,采用Waters Nova-Pak色谱柱(3.9 mm i.d.×150 mm,4 μm),以甲醇、乙腈和1%的磷酸溶液为流动相,梯度洗脱,柱后光化学衍生、改变波长荧光检测。黄曲霉毒素(B1、B2、G1和G2)、玉米赤霉烯酮和赭曲霉毒素A检出限分别为0.24,4.0和0.5 μg/kg,标准曲线的线性范围分别为0.24~6.0,4.0~100.0和0.5~40.0 μg/L;在小麦、玉米、黑麦样品中,平均加标回收率为70.8% ~94.0%,相对标准偏差为2.79% ~9.38%。     

液相色谱-串联质谱法测定动物肝脏中黄曲霉毒素

建立了动物肝脏中黄曲霉毒素G2、G1、B2、B1的高效液相色谱-串联质谱检测方法。样品经体积比为84∶16的乙腈-水溶液提取,离心后通过真菌毒素多功能净化柱,净化液氮气吹干,用流动相定容,采用C18柱分离,10mmol/L的甲酸铵溶液和甲醇作为流动相,以50∶50比例等度洗脱,在多重反应监测(MRM)正离子模式下进行分析。各组分在9min内完全分离,方法线性关系良好,黄曲霉毒素G2、G1、B2、B1的检出限分别为0.030、0.026、0.016、0.027μg/kg,三个加标水平下平均回收率在81%～98%之间,相对标准偏差小于2%。该方法简便快速,准确可靠,可用于动物肝脏中黄曲霉毒素的测定。     

免疫亲和柱净化-柱后光化学衍生-高效液相色谱法同时检测粮谷中的黄曲霉素、玉米赤霉烯酮和赭曲霉毒素A

建立了同时检测粮谷中黄曲霉毒素(B1、B2、G1和G2)、玉米赤霉烯酮和赭曲霉毒素A的免疫亲和柱净化-柱后光化学衍生-高效液相色谱方法.样品经过甲醇-水(体积比为80∶20)提取,通过免疫亲和柱富集和净化,采用Waters Nova-Pak色谱柱(3.9 mm I.d.×150 mm,4 μm),以甲醇、乙腈和1%的磷酸溶液为流动相,梯度洗脱,柱后光化学衍生、改变波长荧光检测.黄曲霉毒素(B1、B2、G1和G2)、玉米赤霉烯酮和赭曲霉毒素A检出限分别为0.24,4.0和0.5 μg/kg,标准曲线的线性范围分别为0.24～6.0,4.0～100.0和0.5～40.0 μg/L;在小麦、玉米、黑麦样品中,平均加标回收率为70.8% ～94.0%,相对标准偏差为2.79% ～9.38%.     

基质固相分散液相色谱法检测辣椒产品中的黄曲霉毒素

建立了中性氧化铝-石墨化碳黑的基质固相分散共柱提取净化前处理和以溴为衍生试剂的液相色谱-柱后在线衍生荧光检测法,并将该方法用于辣椒产品中黄曲霉毒素B1,B2,G1,G2的分析。对固相分散剂及共柱净化剂进行了选择和优化。该方法对B1,B2,G1,G2的平均回收率分别为95.4%,87.3%,91.5%和92.6%;方法对B1,G1的检出限为0.25 ng/g,对B2,G2的检出限为0.10 ng/g;对B1,B2,G1,G2进行测定的相对标准偏差(RSD)分别为3.3%,5.8%,4.7%和6.1%。对基质固相分散法和免疫亲和柱法的净化效果进行了比较,结果表明基质固相分散提取净化可以作为一种有效的方法用于辣椒产品中黄曲霉毒素的测定。     

超高效液相色谱法快速检测粮食中黄曲霉毒素的含量

建立了免疫亲和柱净化-超高效液相色谱法快速测定粮食中黄曲霉毒素(Aflatoxins,AF)的检测方法.样品经提取后,用免疫亲和柱净化、浓缩,Waters Acquity UPLC BEH C18色谱柱(50 mm×2.1 mm,1.7 um)分离.以甲醇-水(40∶60,V/V)为流动相,流速为0.2 mL/min,进样量为1μL,荧光检测器检测,激发波长为360 nm,发射波长为440 nm,无需衍生.黄曲霉毒素B1,B2,G1,G2的保留时间小于5min,从样品前处理到结果分析整个过程小于45 min.根据3倍信噪比的峰响应值,确定黄曲霉毒素(B1,B2,G1,G2)检出限分别为0.15,0.05,0.40,0.06 pg,4种毒素在0.4 ～ 60.0 pg,0.2～15.0 pg,1.5～ 60.0 pg和0.2～15.0 pg范围内分别呈线性相关,相关系数R2值分别为0.9999,0.9999,0.9998和0.9992;在小麦、玉米、稻谷3类样品中加标回收率为77.4％ ～ 104.2％,精密度为1.8％ ～ 8.9％.本方法无需衍生即可同时测定粮食中4种黄曲霉毒素,适用于粮食中黄曲霉毒素的快速定量测定.     

免疫亲和柱净化-光化学柱后衍生-高效液相色谱法测定柏子仁中的黄曲霉毒素

采用免疫亲和柱净化-光化学柱后衍生-高效液相色谱法测定中药材柏子仁中的黄曲霉毒素G_2、G_1、B_2和B_1。样品经甲醇(7+3)溶液提取,提取液经免疫亲和柱净化,用甲醇洗脱,洗脱液经黄曲霉毒素专用C18色谱柱分离,以甲醇(45+55)溶液为流动相进行洗脱,柱后光化学衍生波长为254nm,荧光检测器的激发波长为365nm,发射波长为440nm。黄曲霉毒素G2、B2的线性范围均为0.125~5.0μg·L~(-1),黄曲霉毒素G_1、B_1的线性范围均为0.50~20μg·L~(-1),检出限(3S/N)在0.012~0.047μg·L~(-1)之间。加标回收率81.4%~105%之间,测定值的相对标准偏差(n=6)在1.6%~6.9%之间。     

光化学柱后衍生–高效液相色谱法测定婴幼儿营养米粉中的黄曲霉毒素B1

建立婴幼儿营养米粉中黄曲霉毒素B1的高效液相色谱荧光检测器测定方法。样品以甲醇–水(体积比70∶30)溶液匀质提取,过黄曲霉毒素B1免疫层析亲和柱净化,经CNW Athena C18色谱柱分离和光化学柱后衍生反应器衍生后,用带有荧光检测器的高效液相色谱仪测定。采用峰面积外标法定量黄曲霉毒素B1含量。黄曲霉毒素B1在0～10μg/L的浓度范围内线性关系良好,相关系数为0.999 8,检出限为0.25μg/kg。在3个添加水平下加标回收率为97.7%～106.9%,测定结果的相对标准偏差为1.7%(n=6)。该方法的灵敏度、准确度、精密度均符合黄曲霉毒素B1的检测技术要求,适用于婴幼儿营养米粉中黄曲霉毒素B1的日常检测。     

多功能柱净化-柱后光化学衍生-高效液相色谱法同时检测玉米和花生中9种真菌毒素

建立了同时检测玉米和花生中黄曲霉毒素B1、B2、G1、G2、M1、M2、玉米赤霉烯酮、呕吐毒素和展青霉素的多功能柱净化-柱后光化学衍生-高效液相色谱检测方法。样品经乙腈-水(体积比为86∶14)提取,多功能净化柱净化,采用C18柱分离,以甲醇、乙腈和水为流动相进行梯度洗脱,在线光化学衍生,以荧光和二极管阵列测器同时检测。黄曲霉毒素B1、B2、G1、G2、M1、M2、玉米赤霉烯酮、呕吐毒素和展青霉素的检出限分别为0.02μg/kg、0.01μg/kg、0.03μg/kg、0.05μg/kg、0.08μg/kg、0.04μg/kg、0.09μg/kg、0.20mg/kg和0.04 mg/kg,在相应浓度范围内线性相关系数均大于0.999,平均加标回收率为80.0%~101.5%,相对标准偏差在1.3%~5.6%之间。该方法简便快速、灵敏度高、重现性好,可满足玉米、花生中9种黄曲霉毒素的检测。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.