Synthesis of triazoles from nonactivated terminal alkynes via the three-component coupling reaction using a Pd(0)-Cu(I) bimetallic catalyst

The synthesis of triazoles via the three-component coupling reaction of unactivated terminal alkynes, allyl carbonate, and trimethylsiyl azide under the Pd(0)-Cu(I) bimetallic catalyst is developed. The reaction most probably proceeds through the formation of a pi-allylpalladium azide complex and a copper-acetylide followed by a successive [3 + 2] cycloaddition. The deallylation of the resulting allyltriazoles proceeds very easily by the Ru-catalyzed isomerization followed by the ozonolysis of the resulting propenyltriazoles to give the triazoles in high yields.     

Four-component coupling reactions of silylacetylenes, allyl carbonates, and trimethylsilyl azide catalyzed by a Pd(0)-Cu(I) bimetallic catalyst. Fully substituted triazole synthesis from seemingly internal alkynes

Fully substituted triazoles were synthesized via the four-component coupling reaction of unactivated silylacetylenes, two equivalents of allyl carbonates, and trimethylsilyl azide in the presence of a Pd(0)-Cu(I) bimetallic catalyst. Various trisubstituted 1,2,3-triazoles were obtained in good yields. The reaction most probably proceeds through the [3+2] cycloaddition reaction between the alkynylcopper species and azide followed by the cross-coupling reaction between the vinylcopper intermediate and π-allylpalladium complex.     

Copper iodide nanoparticles on poly(4-vinyl pyridine) as new and green catalyst for multicomponent click synthesis of 1,4-disubstituted-l,2,3-triazoles in water

Poly(4-vinyl pyridine) supported nanoparticle of copper(Ⅰ) iodide is reported as a green and recyclable catalyst for the regioselective synthesis of 1,4-disubstituted-1H-1,2,3-triazoles from benzyl halides,sodium azide and terminal alkynes in water. This catalyst can be recovered by simple filtration and recycled up to 8 consecutive runs without any loss of its efficiency.     

RuH2(CO)(PPh3)3 catalyzed selective formation of 1,4-disubstituted triazoles from cycloaddition of alkynes and organic azides

The ruthenium hydride complex RuH(2)(CO)(PPh(3))(3) was found to be an effective catalyst for the cycloaddition reactions of terminal alkynes and azides. In the presence of RuH(2)(CO)(PPh(3))(3), various azides reacted with a range of terminal alkynes to produce 1,4-disubstituted 1,2,3-triazoles with 100% selectivity and moderate to excellent yields.     

Copper-catalyzed azide-alkyne cycloaddition reaction in water using cyclodextrin as a phase transfer catalyst

1,4-Disubstituted-1,2,3-triazoles were obtained in excellent yields from azides and terminal alkynes in H(2)O in the presence of catalytic amount of β-cyclodextrin as a phase transfer catalyst. Also, a one-pot CuAAC reaction was carried out successfully, affording 1,4-disubstituted-1,2,3-triazoles in good to high yields starting from an alkyl bromide, sodium azide, and terminal alkyne.     

Regiospecific synthesis of 2-allyl-1,2,3-triazoles by palladium-catalyzed 1,3-dipolar cycloaddition

2-Allyl-1,2,3-triazoles were prepared by the palladium-catalyzed three component coupling (TCC) reaction of alkynes, allyl methyl carbonate and trimethylsilyl azide. A π-allylpalladium azide complex, which undergoes the 1,3-dipolar cycloaddition with alkynes, is proposed as a key intermediate in the TCC reaction.     

A facile and regioselective synthesis of 1,4-disubstituted 1,2,3-triazoles using click chemistry

The reaction of α-tosyloxy ketones, sodium azide, and terminal alkynes in presence of copper(I) in aqueous polyethylene glycol afforded regioselectively 1,4-disubstituted 1,2,3-triazoles in good yield at ambient temperature. The one-pot exclusive formation of 1,4-disubstituted 1,2,3-triazoles involves in situ formation of α-azido ketones, followed by cycloaddition reaction with terminal alkyne. The generality of this one-pot method was demonstrated by synthesizing an array of diverse 1,4-disubstituted 1,2,3-triazoles.     

Three-component coupling of alkynes, Baylis-Hillman adducts and sodium azide: a new synthesis of substituted triazoles

A three-component coupling was used to prepare a series of 1,4-disubstituted-1,2,3-triazoles from the corresponding acetylated Baylis-Hillman adducts, sodium azide and terminal alkynes. This one-pot reaction further increases the efficacy of ‘Click’ synthesis and diversifies the preparation of multi-functional 1,4-disubstituted-1,2,3-triazoles.     

Rh-catalyzed transannulation of N-tosyl-1,2,3-triazoles with terminal alkynes

The first transannulation of 1,2,3-triazoles with terminal alkynes into pyrroles is reported. The reaction proceeds in the presence of a Rh(2)(oct)(4)/AgOCOCF(3) binary catalyst system providing a straightforward approach to 1,2,4-trisubstituted pyrroles in good to excellent yields.     

Immobilized copper(II) on nitrogen‐rich polymer‐entrapped Fe3O4 nanoparticles: a highly loaded and magnetically recoverable catalyst for aqueous click chemistry

A heterogeneous magnetic copper catalyst was prepared via anchoring of copper sulfate onto multi‐layered poly(2‐dimethylaminoethyl acrylamide)‐coated magnetic nanoparticles and was characterized using various techniques. The catalyst was found to be active, effective and selective for one‐pot three‐component reaction of alkyl halide, sodium azide and alkyne, known as copper‐catalyzed click synthesis of 1,2,3‐triazoles. As little as 0.3 mol% of catalyst was found to be effective under the optimum conditions. The catalyst could also be recycled and reused up to seven times without significant loss of activity. Thermal stability, high loading level of copper on catalyst, broad diversity of alkyl/benzyl/allyl bromide/chloride and alkyl/aryl terminal alkynes without isolation of azide intermediate, and good to excellent yields of products make this procedure highly economical. Copyright © 2015 John Wiley & Sons, Ltd.     

Cu(I)-catalyzed one-pot synthesis of 1,4-disubstituted 1,2,3-triazoles via nucleophilic displacement and 1,3-dipolar cycloaddition

An efficient method is described for the regioselective synthesis of 1,4-disubstituted 1,2,3-triazoles in high yields from a variety of Baylis-Hillman acetates and terminal alkynes with sodium azide using CuI as a catalyst, in either water or polyethylene glycol (PEG). This procedure is operationally simple and environmentally benign. Polyethylene glycol (PEG) serves as an efficient reusable solvent with higher efficiency.     

Ruthenium-catalyzed cycloaddition of alkynes and organic azides

Cp*RuCl(PPh3)2 is an effective catalyst for the regioselective "fusion" of organic azides and terminal alkynes, producing 1,5-disubstituted 1,2,3-triazoles. Internal alkynes also participate in this catalysis, resulting in fully substituted 1,2,3-triazoles.     

Polystyrene resin-supported CuI-cryptand 22 complex: a highly efficient and reusable catalyst for three-component synthesis of 1,4-disubstituted 1,2,3-triazoles under aerobic conditions in water

Polystyrene resin-supported copper(I) iodide-cryptand-22 complex (PS–C22–CuI) was synthesized and characterized by FT-IR, EDX, SEM, XPS, and TG-DTA analysis. This complex was found to be a highly active and robust heterogeneous catalyst for either three-component reaction of organic halides, sodium azide, and terminal alkynes, or the reaction of organic azides and alkynes to form 1,4-disubstituted 1,2,3-triazoles in good to excellent yields at room temperature, using water as the green solvent. The catalyst can be not only easily isolated from the final product by filtration but also reused without significant loss of catalytic activity.     

Facile solid-phase ruthenium assisted azide-alkyne cycloaddition (RuAAC) utilizing the Cp1RuCl(COD)-catalyst

The ruthenium assisted azide-alkyne cycloaddition (RuAAC) reaction is a well-established method for the generation of 1,5- and 1,4,5-substituted 1,2,3-triazoles, which we have extended to the solid-phase synthesis of 1,2,3-triazole-peptides. The 1,2,3-triazole moieties were formed upon the reaction of alkynes with a solid-phase bound secondary azide in the presence of the Cp¹RuCl(COD) catalyst at room temperature. Both terminal and internal alkynes underwent highly regioselective cycloaddition reactions under mild conditions, facilitating release of the peptide construct from the resin with intact side-chain protection. Almost quantitative conversion to the corresponding 1,2,3-triazoles was observed within 1 h.     

One-pot synthesis of 4,5-disubstituted 1,2,3-(NH)-triazoles by silica supported-zinc bromide in the aerobic condition

An efficient one-pot cross-coupling/1,3-dipolar cycloaddition sequence was developed for a convenient synthesis of 4,5-disubstituted-1,2,3-(NH)-triazoles, starting from various acid chlorides, terminal alkynes and sodium azide in the presence of silica supported-zinc bromide under aerobic conditions.     

Sonochemical Synthesis of 1,4‐Disubstituted 1,2,3‐Triazoles in Aqueous Medium

An ultrasound‐accelerated fast and efficient three‐component reaction for the regioselective synthesis of l,4‐disubstituted 1,2,3‐triazoles using different alkyl and allyl halides, terminal alkynes, and sodium azide in water at room temperature has been developed using CuI as catalyst. Ultrasonication dramatically decreases the reaction times.     

Ruthenium-catalyzed azide-alkyne cycloaddition: scope and mechanism

The catalytic activity of a series of ruthenium(II) complexes in azide-alkyne cycloadditions has been evaluated. The [Cp*RuCl] complexes, such as Cp*RuCl(PPh 3) 2, Cp*RuCl(COD), and Cp*RuCl(NBD), were among the most effective catalysts. In the presence of catalytic Cp*RuCl(PPh 3) 2 or Cp*RuCl(COD), primary and secondary azides react with a broad range of terminal alkynes containing a range of functionalities selectively producing 1,5-disubstituted 1,2,3-triazoles; tertiary azides were significantly less reactive. Both complexes also promote the cycloaddition reactions of organic azides with internal alkynes, providing access to fully-substituted 1,2,3-triazoles. The ruthenium-catalyzed azide-alkyne cycloaddition (RuAAC) appears to proceed via oxidative coupling of the azide and alkyne reactants to give a six-membered ruthenacycle intermediate, in which the first new carbon-nitrogen bond is formed between the more electronegative carbon of the alkyne and the terminal, electrophilic nitrogen of the azide. This step is followed by reductive elimination, which forms the triazole product. DFT calculations support this mechanistic proposal and indicate that the reductive elimination step is rate-determining.     

Reusable polymer-supported catalyst for the [3+2] Huisgen cycloaddition in automation protocols

[reaction: see text] A polymer-supported catalyst for Huisgen's [3+2] cycloaddition reaction between azides and alkynes was prepared from copper(I) iodide and Amberlyst A-21. This catalyst was then used in an automated synthesis of 1,4-disubstituted 1,2,3-triazoles giving access to these products in good yields. The catalyst has shown good activity, stability, and recycling capabilities.     

Efficient synthesis of 2-substituted-1,2,3-triazoles

In this three-component reaction, alkynes undergo a copper(I)-catalyzed cycloaddition with sodium azide and formaldehyde to yield 2-hydroxymethyl-2 H-1,2,3-triazoles, which are useful intermediates that can be readily converted to polyfunctional molecules. The hydroxymethyl group can also be removed, providing convenient access to N H-1,2,3-triazoles. The reaction is experimentally simple and readily scalable.     

Efficient synthesis of 1,4-disubstituted 1,2,3-triazoles in ionic liquid/water system

A copper(I) catalyst in a mixture of the ionic liquid [bmim][BF₄] and water, can effect three-component reaction of halides, sodium azide and alkynes to form 1,4-disubstituted 1,2,3-triazoles in good to high yields. The method is efficient and environmentally friendly.