Unprecedented Electron‐Poor Octahedral Ta6 Clusters in a Solid‐State Compound: Synthesis,Characterisations and Theoretical Investigations of Cs2BaTa6Br15O3

The crystal structure of Cs₂BaTa₆Br₁₅O₃ has been elucidated by using synchrotron X‐ray powder diffraction and absorption experiments. It is built from edge‐bridged octahedral [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^4? cluster units with a singular poor metallic electron (ME) count equal to thirteen. This leads to a paramagnetic behaviour related to one unpaired electron. The arrangement of the Ta₆ clusters is similar to that of Cs₂LaTa₆Br₁₅O₃ exhibiting 14‐MEs per [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^5? motif. The poorer electron‐count cluster presents longer metal–metal distances as foreseen according to the electronic structure of edge‐bridged hexanuclear cluster. Density functional theory (DFT) calculations on molecular models were used to rationalise the structural properties of 13‐ and 14‐ME clusters. Periodic DFT calculations demonstrate that the electronic structure of these solid‐state compounds is related to those of the discrete octahedral units. Oxygen–barium interactions seem to prevent the geometry of the octahedral cluster to strongly distort, allowing stabilisation of this unprecedented electron‐poor Ta₆ cluster in the solid state.     

Guanidinium Alkynesulfonates with Single‐Layer Stacking Motif: Interlayer Hydrogen Bonding Between Sulfonate Anions Changes the Orientation of the Organosulfonate R Group from “Alternate Side” to “Same Side”

Hydrolyses of HC?CSO₃SiMe₃ ( 1 ) and CH₃C?CSO₃SiMe₃ ( 2 ) lead to the formation of acetylenic sulfonic acids HC?CSO₃H?2.33 H₂O ( 3 ) and CH₃C?CSO₃H?1.88 H₂O ( 4 ). These acids were reacted with guanidinium carbonate to yield [⁺C(NH₂)₃][HC?CSO₃^?] ( 5 ) and [⁺C(NH₂)₃][CH₃C?CSO₃^?] ( 6 ). Compounds 1 – 6 were characterized by spectroscopic methods, and the X‐ray crystal structures of the guanidinium salts were determined. The X‐ray results of 5 show that the guanidinium cations and organosulfonate anions associate into 1D ribbons through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions, whereas association of these ions in 6 is achieved through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) and ${{\rm R}{{1\hfill \atop 2\hfill}}}$ (6) interactions. The ribbons in 5 associate into 2D sheets through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions and ${{\rm R}{{3\hfill \atop 6\hfill}}}$ (12) rings, whereas those in 6 are connected through ${{\rm R}{{1\hfill \atop 2\hfill}}}$ (6) and ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions and ${{\rm R}{{4\hfill \atop 6\hfill}}}$ (14) rings. Compound 6 exhibits a single‐layer stacking motif similar to that found in guanidinium alkane‐ and arenesulfonates, that is, the alkynyl groups alternate orientation from one ribbon to the next. The stacking motif in 5 is also single‐layer, but due to interlayer hydrogen bonding between sulfonate anions, the alkynyl groups of each sheet all point to the same side of the sheet.     

Polysulfide Chemistry in Sodium–Sulfur Batteries and Related Systems— A Computational Study by G3X(MP2) and PCM Calculations

The sodium–sulfur (NAS) battery is a candidate for energy storage and load leveling in power systems, by using the reversible reduction of elemental sulfur by sodium metal to give a liquid mixture of polysulfides (Na₂S_n) at approximately 320 °C. We investigated a large number of reactions possibly occurring in such sodium polysulfide melts by using density functional calculations at the G3X(MP2)/B3LYP/6‐31+G(2df,p) level of theory including polarizable continuum model (PCM) corrections for two polarizable phases, to obtain geometric and, for the first time, thermodynamic data for the liquid sodium–sulfur system. Novel reaction sequences for the electrochemical reduction of elemental sulfur are proposed on the basis of their Gibbs reaction energies. We suggest that the primary reduction product of S₈ is the radical anion ${{\rm S}{{{{\bullet}}- \hfill \atop 8\hfill}}}$ , which decomposes at the operating temperature of NAS batteries exergonically to the radicals ${{\rm S}{{{{\bullet}}- \hfill \atop 2\hfill}}}$ and ${{\rm S}{{{{\bullet}}- \hfill \atop 3\hfill}}}$ together with the neutral species S₆ and S₅, respectively. In addition, ${{\rm S}{{{{\bullet}}- \hfill \atop 8\hfill}}}$ is predicted to disproportionate exergonically to S₈ and ${{\rm S}{{2- \hfill \atop 8\hfill}}}$ followed by the dissociation of the latter into two ${{\rm S}{{{{\bullet}}- \hfill \atop 4\hfill}}}$ radical ions. By recombination reactions of these radicals various polysulfide dianions can in principle be formed. However, polysulfide dianions larger than ${{\rm S}{{2- \hfill \atop 4\hfill}}}$ are thermally unstable at 320 °C and smaller dianions as well as radical monoanions dominate in Na₂S_n (n=2–5) melts instead. The reverse reactions are predicted to take place when the NAS battery is charged. We show that ion pairs of the types ${{\rm NaS}{{{{\bullet}}\hfill \atop 2\hfill}}}$ , ${{\rm NaS}{{- \hfill \atop n\hfill}}}$ , and Na₂S_n can be expected at least for n=2 and 3 in NAS batteries, but are unlikely in aqueous sodium polysulfide except at high concentrations. The structures of such radicals and anions with up to nine sulfur atoms are reported, because they are predicted to play a key role in the electrochemical reduction process. A large number of isomerization, disproportionation, and sulfurization reactions of polysulfide mono‐ and dianions have been investigated in the gas phase and in a polarizable continuum, and numerous reaction enthalpies as well as Gibbs energies are reported.     

A Copper–Formate Framework Showing a Simple to Helical Antiferroelectric Transition with Prominent Dielectric Anomalies and Anisotropic Thermal Expansion,and Antiferromagnetism

We present here the compound [NH₄][Cu(HCOO)₃], a new member of the [NH₄][M(HCOO)₃] family. The Jahn–Teller Cu²⁺ ion leads to a distorted 4⁹?6⁶ chiral Cu–formate framework. In the low‐temperature (LT) orthorhombic phase, the Cu²⁺ is in an elongated octahedron, and the ${{\rm NH}{{+\hfill \atop 4\hfill}}}$ ions in the framework channel are off the channel axis. From 94 to 350 K the ${{\rm NH}{{+\hfill \atop 4\hfill}}}$ ion gradually approaches the channel axis and the related modulation of the framework and the hydrogen‐bond system occurs. The LT phase is simple antiferroelectric (AFE). The material becomes hexagonal above 355 K. In the high‐temperature (HT) phase, the Cu²⁺ octahedron is compressed, and the ${{\rm NH}{{+\hfill \atop 4\hfill}}}$ ions are arranged helically along the channel axis. Therefore, the phase transition is one from LT simple AFE to HT helical AFE. The temperature‐dependent structure evolution is accompanied by significant thermal and dielectric anomalies and anisotropic thermal expansion, due to the different status of the ${{\rm NH}{{+\hfill \atop 4\hfill}}}$ ions and the framework modulations, and the structure–property relationship was established based on the extensive variable‐temperature single‐crystal structures. The material showed long range ordering of antiferromagnetism (AFM), with low dimensional character and a Néel temperature of 2.9 K. Therefore, within the material AFE and AFM orderings coexist in the low‐temperature region.     

Crystal Structures and Emitting Properties of Trifluoromethylaminoquinoline Derivatives: Thermal Single‐Crystal‐to‐Single‐Crystal Transformation of Polymorphic Crystals That Emit Different Colors

2,4‐Trifluoromethylquinoline (TFMAQ) derivatives that have amine ( 1 ), methylamine ( 2 ), phenylamine ( 3 ), and dimethylamine ( 4 ) substituents at the 7‐position of the quinoline ring were prepared and crystallized. Six crystals including the crystal polymorphs of 2 (crystal GB and YG) and 3 (crystal B and G) were obtained and characterized by X‐ray crystallography. In solution, TFMAQ derivatives emitted relatively strong fluorescence (${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =418–469 nm and Φ_f(s)=0.23–0.60) depending on the solvent polarity. From Lippert–Mataga plots, Δμ values in the range of 7.8–14 D were obtained. In the crystalline state, TFMAQ derivatives emitted at longer wavelengths (${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =464–530 nm) with lower intensity (Φ_f(c)=0.01–0.28) than those in n‐hexane solution. The polymorphous crystals of 2 and 3 emitted different colors: 2 , ${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =470 and 530 nm with Φ_f(c)=0.04 and approximately 0.01 for crystal GB and YG, respectively; and 3 , ${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =464 and 506 nm with Φ_f(c)=0.28 and approximately 0.28 for crystal B and G, respectively. In both crystal polymorphs of 2 and 3 , crystals GB and G showed emission color changes by heating/melting/cooling cycles that were representative. By following the color changes in heating at the temperature below the melting point with X‐ray diffraction measurements and X‐ray crystallography, the single‐crystal‐to‐single‐crystal transformations from crystal GB to YG for 2 and from crystal B to G for 3 were revealed.     

Tautomerism and Atropisomerism in Free‐Base (meso)‐Strapped Porphyrins: Static and Dynamic Aspects

We report herein some outstanding examples of atropisomerism and tautomerism in five (meso‐)strapped porphyrins. Porphyrins S0 – S4 have been synthesised, characterised and studied in detail by spectroscopic and spectrometric techniques, and their isomeric purity verified by HPLC analysis. In particular, they exhibit perfectly well‐defined NMR spectra that display distinct patterns depending on their average symmetry at room temperature: C_2v, D_2d, C_2h, C_2v, and D_2h for S0 – S4 , respectively. NH tautomerism was evidenced by variable‐low‐temperature ¹H NMR experiments in [D₂]dichloromethane performed on S0 (Δ${G{{{\ne}\hfill \atop {\rm 298K}\hfill}}}$ =48±1 kJ mol^?1) and S1 (Δ${G{{{\ne}\hfill \atop {\rm 298K}\hfill}}}$ =55±3 kJ mol^?1), which has led to an understanding of the average spectra observed for the five porphyrins at room temperature. On the other hand, S2 and S3 are stable atropisomers at room temperature, easily separated and characterised, as a result of restricted rotation of their strapped bridges due to their high rotational barrier energies. Upon heating to 82 °C, they slowly equilibrate to a thermodynamic ratio of 64:36 in favour of the more stable S2 isomer. This atropisomerisation process was evidenced by ¹H NMR spectroscopy and monitored by HPLC, from which high rotational energy barriers of 115.2 (Δ${G{{{\ne}\hfill \atop {\rm S2}\rightarrow {\rm S3}\hfill}}}$ ) and 116.9 kJ mol^?1 (Δ${G{{{\ne}\hfill \atop {\rm S2}\rightarrow {\rm S3}\hfill}}}$ ) were deduced.     

Chlorthionitrenkomplexe des Molybdäns

Chlorothionitrene Complexes of Molybdenum Molybdenum pentachloride reacts with trimer thiazylchloride, (NSCl)₃, forming the chlorothionitrene complex \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm Cl}_4 {\rm Mo} = \mathop {\rm N}\limits^ \oplus = \mathop {{\rm SCl}}\limits^ \ominus $\end{document}, in which the chlorothionitrene ligand is to be understood as (NSCl)^2? group. I reacts with phosphorylchloride forming the solvate Cl₃PO? Mo(Cl₄)(NSCl) ( II ) that can also be obtained directly from MoCl₅ · OPCl₃ and trithiazylchloride. II reacts with chloride ions giving the anionic chlorothionitrene complex [Cl₅Mo(NSCl)]? ( III ). Thermal decomposition of I leads to MoNCl₃ under SCl₂ cleavage, while reaction of I with chloride ions gives [MoNCl₄]?. Both reactions prove chlorothionitrene complexes to be excellent precursors for the syntheses of nitrido complexes. The complexes I—III have been characterized by IR spectroscopy.     

Heterobimetallic Cuprates Consisting of a Redox‐Switchable,Silicon‐Based Metalloligand: Synthesis,Structures, and Electronic Properties

A series of bimetallic silyl halido cuprates consisting of the new tripodal silicon‐based metalloligand [κ³N‐Si(3,5‐Me₂pz)₃Mo(CO)₃]^? is presented (pz=pyrazolyl). This metalloligand is straightforwardly accessible by reacting the ambidentate ligand tris(3,5‐dimethylpyrazolyl)silanide ({Si(3,5‐Me₂pz)₃}^?) with [Mo(CO)₃(η⁶‐toluene)]. The compound features a fac‐coordinated tripodal chelating ligand and an outward pointing, “free” pyramidal silyl donor, which is easily accessible for a secondary coordination to other metal centers. Several bimetallic silyl halido cuprates of the general formula [CuX{μ‐κ¹Si:κ³N‐Si(3,5‐Me₂pz)₃Mo(CO)₃}]^? (X=Cl, Br, I) have been synthesized. The electronic and structural properties of these complexes were probed in detail by X‐ray diffraction analysis, electrospray mass spectrometry, infrared‐induced multiphoton dissociation studies, cyclic voltammetry, spectroelectrochemistry, gas‐phase photoelectron spectroscopy, as well as UV/Vis and fluorescence spectroscopy. The heterobimetallic complexes contain linear two‐coordinate copper(I) entities with the shortest silicon–copper distances reported so far. Oxidation of the anionic complexes in methylene chloride and acetonitrile solutions at ${E{{0\hfill \atop 1/2\hfill}}}$ =?0.60 and ?0.44 V (vs. ferrocene/ferrocenium (Fc/Fc⁺)), respectively, shows substantial reversibility. Based on various results obtained from different characterization methods, as well as density functional theory calculations, these oxidation events were attributed to the Mo⁰/Mo^I redox couple.     

A Bis(pyridine N‐oxide) Analogue of DOTA: Relaxometric Properties of the GdIII Complex and Efficient Sensitization of Visible and NIR‐Emitting Lanthanide(III) Cations Including PrIII and HoIII

We report the synthesis of a cyclen‐based ligand (4,10‐bis[(1‐oxidopyridin‐2‐yl)methyl]‐1,4,7,10‐tetraazacyclododecane‐1,7‐diacetic acid= L1 ) containing two acetate and two 2‐methylpyridine N‐oxide arms anchored on the nitrogen atoms of the cyclen platform, which has been designed for stable complexation of lanthanide(III) ions in aqueous solution. Relaxometric studies suggest that the thermodynamic stability and kinetic inertness of the Gd^III complex may be sufficient for biological applications. A detailed structural study of the complexes by ¹H NMR spectroscopy and DFT calculations indicates that they adopt an anti‐Δ(λλλλ) conformation in aqueous solution, that is, an anti‐square antiprismatic (anti‐SAP) isomeric form, as demonstrated by analysis of the ¹H NMR paramagnetic shifts induced by Yb^III. The water‐exchange rate of the Gd^III complex is ${k{{298\hfill \atop {\rm ex}\hfill}}}$ =6.7×10⁶ s^?1, about a quarter of that for the mono‐oxidopyridine analogue, but still about 50 % higher than the ${k{{298\hfill \atop {\rm ex}\hfill}}}$ of GdDOTA (DOTA=1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid). The 2‐methylpyridine N‐oxide chromophores can be used to sensitize a wide range of Ln^III ions emitting in both the visible (Eu^III and Tb^III) and NIR (Pr^III, Nd^III, Ho^III, Yb^III) spectral regions. The emission quantum yield determined for the Yb^III complex (${Q{{{\rm L}\hfill \atop {\rm Yb}\hfill}}}$ =7.3(1)×10^?3) is among the highest ever reported for complexes of this metal ion in aqueous solution. The sensitization ability of the ligand, together with the spectroscopic and relaxometric properties of its complexes, constitute a useful step forward on the way to efficient dual probes for optical imaging (OI) and MRI.     

Rubidium Polyhydrides Under Pressure: Emergence of the Linear H3− Species

The structures of compressed rubidium polyhydrides, RbH_n with n>1, and their evolution under pressure are studied using density functional theory calculations. These phases, which start to stabilize at only P=2 GPa, consist of Rb⁺ cations and one or more of the following species: H^? anions, H₂ molecules, and ${{\rm H}{{- \hfill \atop 3\hfill}}}$ molecules. The latter motif, the simplest example of a three‐center four‐electron bond, is found in the most stable structures, RbH₅ and RbH₃, which metallize above 200 GPa. At the highest pressures studied, our evolutionary searches find an RbH₆ phase which contains polymeric (${{\rm H}{{- \hfill \atop 3\hfill}}}$ )_∞ chains that show signs of one‐dimensional liquid‐like behavior.     

Solar Fuels: Photoelectrosynthesis of CO from CO2 at p‐Type Si using Fe Porphyrin Electrocatalysts

Photoelectrocatalytic conversion of CO₂ to CO can be driven at a boron‐doped, hydrogen terminated, p‐type silicon electrode using a meso‐tetraphenylporphyrin Fe^III chloride in the presence of CF₃CH₂OH as a proton source and 0.1 M [NBu₄][BF₄]/MeCN/5 % DMF (v/v) as the electrolyte. Under illumination with polychromatic light, the photoelectrocatalysis operates with a photovoltage of about 650 mV positive of that for the dark reaction. Carbon monoxide is produced with a current efficiency >90 % and with a high selectivity over H₂ formation. Photoelectrochemical current densities of 3 mA cm^?2 at ?1.1 V versus SCE are typical, and 175 turnovers have been attained over a 6 h period. Cyclic voltammetric data are consistent with a turnover frequency of ${k{{{\rm Si}\hfill \atop {\rm obs}\hfill}}}$ =0.24×10⁴ s^?1 for the photoelectrocatalysis at p‐type Si at ?1.2 V versus SCE this compares with ${k{{{\rm C}\hfill \atop {\rm obs}\hfill}}}$ =1.03×10⁴ s^?1 for the electrocatalysis in the dark on vitreous carbon at a potential of ?1.85 V versus SCE.     

Rate constants for the reactions of molecular iodine with Cl,SiCl3, and SiH3 at 298 K

Rate constants k₁, k₂, and k₃ have been measured at 298 K by means of a laser photolysis-laser magnetic resonance technique and (or) by a laser photolysis-infrared chemiluminescence detection technique (LMR and IRCL, respectively). \hfill\hbox to 12em{$\rm Cl+I_2\longrightarrow ICl+I;$}\hbox to 8em{$\rm {\it k}_1=(2.5\pm 0.7)\times 10^{-10}(IRCL)$}\hfill(1)\\\hfill\hbox to 12em{}\hbox to 8em{$\rm {\it k}_1=(2.8\pm 0.8)\times 10^{-10}(LMR)$}\hfill \\\hfill\hbox to 12em{$\rm SiCl_3+I_2\longrightarrow SiCl_3I+I;$}\hbox to 8em{$\rm {\it k}_2=(5.8\pm 1.8)\times 10^{-10}(IRCL)$}\hfill (2)\\\hfill\hbox to 12em{$\rm SiH_3+I_2\longrightarrow SiIH_3+I;$}\hbox to 8em{$\rm {\it k}_3=(1.8\pm 0.46)\times 10^{-10}(LMR)$}\hfill (3)\\ As an average of the LMR and IRCL results we offer the value k₁ = (2.7 ± 0.6) × 10⁻¹⁰. Units are cm³ molecule⁻¹ s⁻¹; uncertainties are 2σ including precision and estimated systematic errors. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 25–33, 1997.     

Transport,Electrochemical and Thermophysical Properties of Two N‐Donor‐Functionalised Ionic Liquids

Two N‐donor‐functionalised ionic liquids (ILs), 1‐ethyl‐1,4‐dimethylpiperazinium bis(trifluoromethylsulfonyl)amide ( 1 ) and 1‐(2‐dimethylaminoethyl)‐dimethylethylammonium bis(trifluoromethylsulfonyl)amide ( 2 ), were synthesised and their electrochemical and transport properties measured. The data were compared with the benchmark system, N‐butyl‐N‐methylpyrrolidinium bis(trifluoromethylsulfonyl)amide ( 3 ). Marked differences in thermal and electrochemical stability were observed between the two tertiary‐amine‐functionalised salts and the non‐functionalised benchmark. The former are up to 170 K and 2 V less stable than the structural counterpart lacking a tertiary amine function. The ion self‐diffusion coefficients (D_i) and molar conductivities (Λ) are higher for the IL with an open‐chain cation ( 2 ) than that with a cyclic cation ( 1 ), but less than that with a non‐functionalised, heterocyclic cation ( 3 ). The viscosities (η) show the opposite behaviour. The Walden [Λ∝(1/η)^t] and Stokes–Einstein [D_i/T)∝(1/η)^t] exponents, t, are very similar for the three salts, 0.93–0.98 (±0.05); that is, the self‐diffusion coefficients and conductivity are set by η. The D_i for 1 and 2 are the same, within experimental error, at the same viscosity, whereas Λ for 1 is approximately 13 % higher than that of 2 . The diffusion and molar conductivity data are consistent, with a slope of 0.98±0.05 for a plot of ln(ΛT) against ln(D₊+D_?). The Nernst–Einstein deviation parameters (Δ) are such that the mean of the two like‐ion VCCs is greater than that of the unlike ions. The values of Δ are 0.31, 0.36 and 0.42 for 3 , 1 and 2 , respectively, as is typical for ILs, but there is some subtlety in the ion interactions given 2 has the largest value. The distinct diffusion coefficients (DDC) follow the order ${D{{{\rm d}\hfill \atop - - \hfill}}}$ <${D{{{\rm d}\hfill \atop ++\hfill}}}$ <${D{{{\rm d}\hfill \atop +- \hfill}}}$ , as is common for [Tf₂N]^? salts. The ion motions are not correlated as in an electrolyte solution: instead, there is greater anti‐correlation between the velocities of a given anion and the overall ensemble of anions in comparison to those for the cationic analogue, the anti‐correlation for the velocities of which is in turn greater than that for a given ion and the ensemble of oppositely charged ions, an observation that is due to the requirement for the conservation of momentum in the system. The DDC also show fractional SE behaviour with t～0.95.     

Kinetics and mechanism of the reactions of the superoxide ion in solutions. II. The kinetics of protonation of the superoxide ion by water and ethanol

The rate constants for the protonation of “free” (that is, solvated) superoxide ions by water and ethanol are equal to 0.5–3.5 ×10^?3M^?1·s^?1 in DMF and AN at 20º. It has been found that the protonation rates for the ion pairs of \documentclass{article}\pagestyle{empty}\begin{document}${\rm O}_{\rm 2}^{\overline {\rm .} }$\end{document} with the Bu₄N⁺ cation are much slower than those for “free” \documentclass{article}\pagestyle{empty}\begin{document}${\rm O}_{\rm 2}^{\overline {\rm .} }$\end{document}. It is suggested that the effects of aprotic solvents on the protonation rates of \documentclass{article}\pagestyle{empty}\begin{document}${\rm O}_{\rm 2}^{\overline {\rm .} }$\end{document} are mainly due to the fact that the proton donors form solvated complexes of different stability in these solvents.     

Universal Reaction Mechanism of Boronic Acids with Diols in Aqueous Solution: Kinetics and the Basic Concept of a Conditional Formation Constant

To establish a detailed reaction mechanism for the condensation between a boronic acid, RB(OH)₂, and a diol, H₂L, in aqueous solution, the acid dissociation constants (${K{{{\rm BL}\hfill \atop {\rm a}\hfill}}}$ ) of boronic acid diol esters (HBLs) were determined based on the well‐established concept of conditional formation constants of metal complexes. The pK_a values of HBLs were 2.30, 2.77, and 2.00 for the reaction systems, 2,4‐difluorophenylboronic acid and chromotropic acid, 3‐nitrophenylboronic acid and alizarin red S, and phenylboronic acid and alizarin red S, respectively. A general and precise reaction mechanism of RB(OH)₂ with H₂L in aqueous solution, which can serve as a universal reaction mechanism for RB(OH)₂ and H₂L, was proposed on the basis of (a) the relative kinetic reactivities of the RB(OH)₂ and its conjugate base, that is, the boronate ion, toward H₂L, and (b) the determined pK_a values of HBLs. The use of the conditional formation constant, K′, based on the main reaction: RB(OH)₂+H₂L ${{\mathop \leftrightarrow \limits ^{K{_{1}}}_{}}}$ RB(L)(OH)^?+H₃O⁺ instead of the binding constant has been proposed for the general reaction of uncomplexed boronic acid species (B′) with uncomplexed diol species (L′) to form boronic acid diol complex species (esters, BL′) in aqueous solution at pH 5–11: B′+L′ ${{\mathop \leftrightarrow \limits ^{K{^\prime}}_{}}}$ BL′. The proposed reaction mechanism explains perfectly the formation of boronic acid diol ester in aqueous solution.     

Calixarene‐Based Surfactants: Conformational‐Dependent Solvation Shells for the Alkyl Chains

Thermodynamic parameters obtained from studying the micellization of amphiphilic p‐sulfonatocalix[n]arenes were correlated with the alkyl chain length and with the number of monomeric units (n) in the calix[n]arene structure. The micellization Gibbs free energy (Δ${G{{{\rm o}\hfill \atop {\rm M}\hfill}}}$ ) becomes more negative upon increasing the alkyl chain length of the p‐sulfonatocalix[4]arene. This is in agreement with the trend generally observed for other surfactants. However, the Δ${G{{{\rm o}\hfill \atop {\rm M}\hfill}}}$ value for transferring one CH₂ group from the bulk aqueous medium to the micelle [Δ${G{{{\rm o}\hfill \atop {\rm M}\hfill}}}$ (CH₂)] is lower than the value generally observed for single‐chain surfactants, suggesting the existence of intramolecular interactions between the alkyl chains of the free unimers. On the other hand, the critical micelle concentration (cmc; per alkyl chain unit) increased with the increasing number of monomeric units. These results are explained on the basis of the conformation adopted by the calixarene in the bulk solution. The calix[4]arene derivatives are preorganized into the cone conformation, which is favorable for the formation of globular aggregates. The calix[6]arene and calix[8]arene derivatives do not adopt cone conformations. Changing these conformations to the more favorable cone conformer in the aggregates implies an energetic cost that contributes to making Δ${G{{{\rm o}\hfill \atop {\rm M}\hfill}}}$ less efficient. In the case of the calix[6]arene derivative this energetic cost is enthalpic, whereas in the case of the octamer it is both enthalpic and entropic. Both the Δ${G{{{\rm o}\hfill \atop {\rm M}\hfill}}}$ (CH₂) value and the change in heat capacity (ΔC${{\rm p}{{{\rm o}\hfill \atop {\rm M}\hfill}}}$ ) seem to indicate that for the cone calix[4]arene derivatives all alkyl chains are solvated by the same hydration shell, whereas in the case of the highly flexible calix[8]arene derivative each alkyl chain is individually hydrated.     

The ionization of water in NaCl media to 300°C

The apparent ionization quotient for water has been measured potentiometrically near the saturation pressure from 25 to 295°C in 1 and 3m NaCl using a previously described hydrogen-electrode concentration cell. The results are presented in terms of a modification of the Brönsted-Guggenheim treatment for activity coefficients of ions. The mathematical form of the temperature dependence for the interaction coefficients was indicated by the more extensive data on \(\gamma _{{\rm H}^ + } \gamma _{{\rm O}{\rm H}^ - } \) in KCl media. From a least-squares analysis of these data in NaCl along with the very precise data from the literature for NaCl media from 0 to 50°C, the following expression for the effect of salt concentration and temperature on logQ _w ^′ is obtained $$\begin{gathered} log Q'_W = log K_W + 2.0AI^{1/2} /(1 + I^{1/2} ) - [p_1 + p_2 /T + p_3 T^2 + p_4 F(I)]I \hfill \\ - 0.0157\phi m_{NaCl} \hfill \\ F(I) = [1 - (1 + 2I^{1/2} - 2I) exp( - 2I^{1/2} )]/4I \hfill \\ \end{gathered} $$      

Polymerization of (o-methylphenyl)acetylene and polymer characterization

(o-Methylphenyl)acetylene polymerized with high yields in the presence of W and Mo catalysts. W catalysts were more active than the corresponding Mo catalysts. The weight-average molecular weight of the polymer formed with W(CO)₆–CCl₄–hv reached 8 × 10⁵, being higher than the maximum value (ca. 2 × 10⁵) for poly(phenylacetylene). The polymer had the structure $\rlap{--} [{\rm CH} \hbox{=\hskip-1pt=} {\rm C}(o - {\rm CH}_3 {\rm C}_6 {\rm H}_4 )\rlap{--} ]_n $. The stereochemical structure of the main chain could be determined by ¹³C-NMR; the cis content varied in a range of 41–61% depending on the polymerization conditions. The present polymer was thermally more stable than poly(phenylacetylene) according to thermogravimetric analysis. Interestingly, this polymer possessed deeper color than poly(phenylacetylene), and showed a fairly strong absorption in the visible region.     

Dosage du molybdene et du tungstene dans les plantes par activation neutronique

A method for the determination of molybdenum and tungsten in plant material using neutron activation analysis was developed. The considered reaction are: $$\begin{gathered} {}^{98}Mo(n,\gamma )^{99} Mo \hfill \\ {}^{186}W(n,\gamma )^{187} W \hfill \\ \end{gathered} $$ The separation for tungsten and molybdenum was carried out using anion exchange separation (Dowex 1×10; 200–400 mesh). Irradiation was carried out in a swimming pool reactor at a thermal flux of about 1–2×10¹³ n·cm^?2·sec^?1 for 15 hours. The samples and standard were allowed to cool for 5–6 hours before chemical processing. the high concentration of calcium in plants (up to 40 mg/g dry material), the use of hydrofluoric acid for a good absorption and quantitative recovery of tungsten led us to dissolve the samples with Ht?H₂O₂ mixtures containing boric acid to prevent the precipitation of fluorides.     

The pK 2 * for the dissociation of H2SO3 in NaCl solutions with added Ni2+, Co2+, Mn2+, and Cd2+ at 25°C

The pK ₂ ^* for the dissociation of sulfurous acid from I=0.5 to 6.0 molal at 25°C has been determined from emf measurements in NaCl solutions with added concentrations of NiCl₂, CoCl₂, McCl₂ and CdCl₂ (m=0.1). These experimental results have been treated using both the ion pairing and Pitzer's specific ion-interaction models. The Pitzer parameters for the interaction of M²⁺ with SO ₃ ^2? yielded $$\begin{gathered} \beta _{NiSO_3 }^{(0)} = - 5.5, \beta _{NiSO_3 }^{(1)} = 5.8, and \beta _{NiSO_3 }^{(2)} = - 138 \hfill \\ \beta _{CoSO_3 }^{(0)} = - 12.3, \beta _{CoSO_3 }^{(1)} = 31.6, and \beta _{CoSO_3 }^{(2)} = - 562 \hfill \\ \beta _{MnSO_3 }^{(0)} = - 8.9, \beta _{MnSO_3 }^{(1)} = 18.7, and \beta _{MnSO_3 }^{(2)} = - 353 \hfill \\ \beta _{CdSO_3 }^{(0)} = - 7.2, \beta _{CdSO_3 }^{(1)} = 13.8, and \beta _{CdSO_3 }^{(2)} = - 489 \hfill \\ \end{gathered} $$ The calculated values of pK ₂ ^* using Pitzer's equations reproduce the measured values to within ±0.01 pK units. The ion pairing model yielded $$\begin{gathered} logK_{NiSO_3 } = 2.88 and log\gamma _{NiSO_3 } = 0.111 \hfill \\ logK_{CoSO_3 } = 3.08 and log\gamma _{CoSO_3 } = 0.051 \hfill \\ logK_{MnSO_3 } = 3.00 and log\gamma _{MnSO_3 } = 0.041 \hfill \\ logK_{CdSO_3 } = 3.29 and log\gamma _{CdSO_3 } = 0.171 \hfill \\ \end{gathered} $$ for the formation of the complex MSO₃. The stability constants for the formation of MSO₃ complexes were found to correlate with the literature values for the formation of MSO₄ complexes.